Related
Worked in Singapore! Might work for other regions also..pls try and report
imugur said:
there is a very simple way to do it: root your phone, change in system/build.prop these 2 lines:
ro.semc.version.cust=XXXX-XXXX
ro.product.name=X10_XXXX-XXXX
change the X with 1234-8465
restart phone and run SEUS
Mugur
http://mugur-ionescu.ro/tag/xperia
Click to expand...
Click to collapse
thanks bro!
i am on 0.435 now...no need to flash.
For anyone else stuck this way is just as good, its my baseband flashing guide. Normal installation and easy method. Everything you need is here
http://forum.xda-developers.com/showthread.php?t=939812
Sent from my FroShed x10i running Cyanogen Mod 6.1.1
This is brutal!
Good tutorial
dosnt work on me...
everytime i close the file editor the numbers will change as the original...
jakp3 said:
dosnt work on me...
everytime i close the file editor the numbers will change as the original...
Click to expand...
Click to collapse
use root explorer, mount as r/w. if it doesn't work it means your phone is not rooted
Thank you, nowim downloading the update, can i set the numbers back after this update?
jakp3 said:
Thank you, nowim downloading the update, can i set the numbers back after this update?
Click to expand...
Click to collapse
you can set them back but don't try to run SEUS again, it will install old firmware.
Mugur
http://mugur-ionescu.ro/tag/xperia
I'm from singapore too, isn't there another way to install 435? tried the other methods and that dint allow me to search for my network operator... i'd try your way but it's kinda troublesome to re-root and install
jakp3 said:
dosnt work on me...
everytime i close the file editor the numbers will change as the original...
Click to expand...
Click to collapse
u have an older version of Root explorer..i was having same problem.
i am using 2.10.1 ...press Menu key after editing the values and tap on Save.
jakp3 said:
Thank you, nowim downloading the update, can i set the numbers back after this update?
Click to expand...
Click to collapse
no need to set them back...because if u do that...and u run SEUS..it ll give u back the older version
hawk13 said:
I'm from singapore too, isn't there another way to install 435? tried the other methods and that dint allow me to search for my network operator... i'd try your way but it's kinda troublesome to re-root and install
Click to expand...
Click to collapse
i am the laziest guy on this forum...hence this method is the quickest..
rooting X10i is extremely easy...check the sticky.
what u need:
1. Rooted X10i
2. Root explorer app (version 2.10.1 recommended)
3. Refer to this thread.
working
I have followed imugur's instructions as given in the first post but rather than changing my UK Generic version for the Nordic one (1234-8465) I went for the Global Generic (1232-9897)
I first tried the phone's own check for updates after rebooting but it found nothing, however, I then tried PC Companion and was immediately given the new software update (with a specific mention of multitouch support being added)
Going through the process now, PC Companion estimates a total time of 30 mins
Cheers,
Mik
Keeps saying that I have the latest firmware i have .24 no multitouch, already on nordic firmware, no update through seus, pc companion or phone.... trying a repair
currently on 2.0.2.A.0.24
x10i
kernel 2.0.49
haha repair said there is no software availible for my phone yet. Please try again later
will this work if i am in canada?
Thats where i am and so far nothing
jeffminz said:
Thats where i am and so far nothing
Click to expand...
Click to collapse
If you got a X10a and flashed X10i firmware on it or vice versa, SEUS and PCC will not recognize your device.
MikLSP said:
I have followed imugur's instructions as given in the first post but rather than changing my UK Generic version for the Nordic one (1234-8465) I went for the Global Generic (1232-9897)
I first tried the phone's own check for updates after rebooting but it found nothing, however, I then tried PC Companion and was immediately given the new software update (with a specific mention of multitouch support being added)
Going through the process now, PC Companion estimates a total time of 30 mins
Cheers,
Mik
Click to expand...
Click to collapse
Hi MikLSP, any update....did this work?
EDIT: also any Rogers, Canada users done this update or could someone recommend a 2.2 ROM with multi-touch already in?
arkedk said:
If you got a X10a and flashed X10i firmware on it or vice versa, SEUS and PCC will not recognize your device.
Click to expand...
Click to collapse
hmmm thats interesting, have to look to switch it back to x10a
Thanks for the insight
And what's the point of that?
The biggest advantage of flashing is to give us a faster phone and most important dualtouch.
By doing that way you can't get either.
And more. I'm not sure about this but on every custom roms you must have 435 flashed so that dualtouch work. Not sure trough.
sent from [MOD][rendeiro2005]Cyanogen6.1.1_v03
jeffminz said:
hmmm thats interesting, have to look to switch it back to x10a
Thanks for the insight
Click to expand...
Click to collapse
If you're rooted you can just change the CDA numbers back to a X10a device, then it will be recognized again.
Downloading
MikLSP said:
I have followed imugur's instructions as given in the first post but rather than changing my UK Generic version for the Nordic one (1234-8465) I went for the Global Generic (1232-9897)
I first tried the phone's own check for updates after rebooting but it found nothing, however, I then tried PC Companion and was immediately given the new software update (with a specific mention of multitouch support being added)
Mik
Click to expand...
Click to collapse
I did the same thing as Mik and had the same results.
I am downloading the update at the moment.
Success!
It worked! I am now using multitouch!
3D Google Maps here I come...
I am located in China. I got a system update notification few days ago.
I did the upgrade without backup. After upgrade
Android version: 2.2.1
software release: 1.84.707.xxx
Unfortunately, the peer could not hear the voice in the phone call.
I did the factory reset, the problem is still the same.
Does someone know where I can find the official ROM?
By the way, my device is rooted.
http://forum.xda-developers.com/showthread.php?t=984045
mujie said:
http://forum.xda-developers.com/showthread.php?t=984045
Click to expand...
Click to collapse
Thanks, I guess it means that I have to reroot the device to flash the rom.
mujie said:
http://forum.xda-developers.com/showthread.php?t=984045
Click to expand...
Click to collapse
This has nothing to do with an official ROM...
Look in the RUU thread if there is your chinese build.
I never got the 4.1.83 update? Was it pulled? I'm stuck on 4.1.57 and whenever I check for an update I get the "your phone is up to date" message. Anyone else with this issue? I'm running 100% stock and bought it on launch day...
kimmikolter said:
I never got the 4.1.83 update? Was it pulled? I'm stuck on 4.1.57 and whenever I check for an update I get the "your phone is up to date" message. Anyone else with this issue? I'm running 100% stock and bought it on launch day...
Click to expand...
Click to collapse
Just flash the 1.83 sbf then.
Get GB 3.5. Kenneth used the 1.83 update on it..install CWM and flash it and you'll have it then.
Swiftks said:
Just flash the 1.83 sbf then.
Click to expand...
Click to collapse
I'm on vacation right now and don't have a computer with me
BravoMotorola said:
Get GB 3.5. Kenneth used the 1.83 update on it..install CWM and flash it and you'll have it then.
Click to expand...
Click to collapse
Gingerblur v.35 is built around the 1.83 as far as the framework and such. It does not however actually update your phone to 1.83. The main update for 1.83 was the radio and allowing HSUPA, which gingerblur does not affect in any way, shape or form. Gingerblur is more or less just a theme... ok, ok, it's a pseudo rom = theme w/ mods & hacks included (not a custom ROM).
i live outside usa and when i connected to wifi i got the update
Your imei has either been blacklisted (for doing something illegal) or they haven't added your imei to their database yet, calll em up and see what's going on
Nyanyanyanyanyannyan
Sent from my MB860 using XDA App
draculahowsby said:
i live outside usa and when i connected to wifi i got the update
Click to expand...
Click to collapse
I'm connected to wifi 24/7
roharia said:
Your imei has either been blacklisted (for doing something illegal) or they haven't added your imei to their database yet, calll em up and see what's going on
Nyanyanyanyanyannyan
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
I got the phone new on launch day and can assure you ive dont nothing illegal Plus, I got the 4.1.57 update (actually I was a beta tester for it)
BravoMotorola said:
Get GB 3.5. Kenneth used the 1.83 update on it..install CWM and flash it and you'll have it then.
Click to expand...
Click to collapse
Do not listen to this!
Swiftks said:
Gingerblur v.35 is built around the 1.83 as far as the framework and such. It does not however actually update your phone to 1.83. The main update for 1.83 was the radio and allowing HSUPA, which gingerblur does not affect in any way, shape or form. Gingerblur is more or less just a theme... ok, ok, it's a pseudo rom = theme w/ mods & hacks included (not a custom ROM).
Click to expand...
Click to collapse
Listen to this!
roharia said:
they haven't added your imei to their database yet, calll em up and see what's going on
Click to expand...
Click to collapse
And maybe do this! IMEI may not be in database for update!
OTA for German Retail version from 4.4.2 to 4.4.4 started to roll out finally.
Download:
http://d-h.st/gUF
The name of the file is Blur_Version.176.44.1.falcon_umts.Retail.en.DE.zip - as always - it is named after the firmware being updated not after the target one.
Were you on stock recovery but rooted when you got this OTA?
I got this Update today too.
BaghiXDA said:
Were you on stock recovery but rooted when you got this OTA?
Click to expand...
Click to collapse
You can always GET an OTA but you won´t be able to install it in some scenarios.
Your system partition has to be mostly untouched, but root and Xposed Framework won´t cause any problem. You can use stock or Philz Recovery.
Also got the update but the installation is failing due to unexpected changes to build.prop. I have removed xposed and anything else I can think of that may have changed the system partition but still no go.
Any ideas? Maybe someone could post their build.prop?
I'm also getting the update in The Netherlands. Bought my phone online amazon.de :laugh:
patient81 said:
Also got the update but the installation is failing due to unexpected changes to build.prop. I have removed xposed and anything else I can think of that may have changed the system partition but still no go.
Any ideas? Maybe someone could post their build.prop?
Click to expand...
Click to collapse
Here you go. Obviously remove the .txt extension.
Bec de Xorbin said:
Here you go. Obviously remove the .txt extension.
Click to expand...
Click to collapse
Thank you kindly.
drfr said:
OTA for German Retail version from 4.4.2 to 4.4.4 started to roll out finally.
Currently uploading it ....
Here we go:
http://d-h.st/gUF
The name of the file is Blur_Version.176.44.1.falcon_umts.Retail.en.DE.zip - as always - it is named after the firmware being updated not after the target one.
Click to expand...
Click to collapse
Can you go to About Phone > Status and tell me what your first 4 numbers of your Imei is? Thanks!
NextGenGTR said:
Can you go to About Phone > Status and tell me what your first 4 numbers of your Imei is? Thanks!
Click to expand...
Click to collapse
Well, I can, but can you tell me why are you asking?
I'm rooted and installed the stock recovery then tried doing the Ota (I'm on stock rom if it matters) and it gives an error, just "error" no more information during the installation process.
Anybody can help?
Sent from my XT1032 using XDA Free mobile app
./.
bad1080 said:
hi, i have an error with the ota update to 4.4.4 myself, my phone is unlocked and rooted (mostly for xframework, xprivacy and gravity box). now i would like to know if i can use the version you have posted?
do i need to reinstall anything after the update? also i would like to know where that version you posted is coming from (is it clean)?
thanks in advance!
Click to expand...
Click to collapse
Yes, you have the right version of firmware for this OTA, don´t know why it´s failing for you, there´s too much variables, it´s hard to tell.
As to where the file I posted comes from - it´s right from my phone. Until today morning I was on French 4.4.4, then I flashed the German 4.4.2 firmware to look if I could catch the OTA and it really came, I pulled it from my /cache and posted here. Check out the MD5 sum: d289331e52d0f79d2bcc4b9b390ff338
It´s the same on my local copy, on the cloud copy I posted and also look here:
http://www.android-hilfe.de/7843052-post301.html
drfr said:
Well, I can, but can you tell me why are you asking?
Click to expand...
Click to collapse
Apparently the update rolls out depending on that 4 numbers, i think it started from something like 3550 and mine is 3593 so i wanted to see if it is close to my number if you get what i mean.
NextGenGTR said:
Apparently the update rolls out depending on that 4 numbers, i think it started from something like 3550 and mine is 3593 so i wanted to see if it is close to my number if you get what i mean.
Click to expand...
Click to collapse
I see, so mine is 3549.
I have 3549 ....en.GB ,no update
Sent from my XT1032 using XDA Free mobile app
drfr said:
I see, so mine is 3549.
Click to expand...
Click to collapse
loungedogg said:
I have 3549 ....en.GB ,no update
Sent from my XT1032 using XDA Free mobile app
Click to expand...
Click to collapse
I am from the UK too, i still dont have any sign of update for 4.4.2, i hope i'm not waiting for a update that is going to make the phone worse...
NextGenGTR said:
I am from the UK too, i still dont have any sign of update for 4.4.2, i hope i'm not waiting for a update that is going to make the phone worse...
Click to expand...
Click to collapse
Why so sceptical? Apart from a different dialer GUI, there´s not much difference you can really feel on 4.4.4, basically there are just some bug fixes.
bad1080 said:
hi, i have an error with the ota update to 4.4.4 myself, my phone is unlocked and rooted (mostly for xframework, xprivacy and gravity box). now i would like to know if i can use the version you have posted?
my phone:
do i need to reinstall anything after the update? also i would like to know where that version you posted is coming from (is it clean)?
thanks in advance!
Click to expand...
Click to collapse
Perhaps you need to uninstall and remove the modules and the xposed from the system before updating. Xposed and the modules add / modify system files and other sources in the device. Make sure you unroot as the last step as well. Stock recovery is required to install the OTA successfully
drfr said:
You can always GET an OTA but you won´t be able to install it in some scenarios.
Your system partition has to be mostly untouched, but root and Xposed Framework won´t cause any problem. You can use stock or Philz Recovery.
Click to expand...
Click to collapse
I just wanted to know, did you also had stock recovery or custom?
Google has published the image here https://developers.google.com/android/nexus/images
Download link:
https://dl.google.com/dl/android/aosp/shamu-lyz28e-factory-b542b88a.tgz
Anyone tried this build on AT&T?
Flashed on Google play phone. I don't have LTE anymore on T-Mobile
helloworld1 said:
Flashed on Google play phone. I don't have LTE anymore on T-Mobile
Click to expand...
Click to collapse
I had to go in and select the correct APN again. It filled up with other ones as well and nothing was selected.
biggiestuff said:
I had to go in and select the correct APN again. It filled up with other ones as well and nothing was selected.
Click to expand...
Click to collapse
That fixed the issue. Thank you!
I take it I'll lose root if I update. If I do lose root how could I gain it back? I did a search and turned up with nothing of use.
OGMCVilleTC said:
I take it I'll lose root if I update. If I do lose root how could I gain it back? I did a search and turned up with nothing of use.
Click to expand...
Click to collapse
Use CF-Auto-Root. It works for me:
https://autoroot.chainfire.eu/
Mirrors please my download keeps failing
helloworld1 said:
Use CF-Auto-Root. It works for me:
https://autoroot.chainfire.eu/
Click to expand...
Click to collapse
Will it reset my device like it did the first time I rooted it?
OGMCVilleTC said:
Will it reset my device like it did the first time I rooted it?
Click to expand...
Click to collapse
No, it won't wipe your device.
I flashed the latest build on my Verizon device no issues. There isn't any ROM specific things for the nexus 6,. even though google says its tmobile only on their website. I think thats because maybe itllbe the only wifi calling supported ROM they release for the nexus 6.
Im on 5.1, root and custom recovery how to flash it without losing anything? Root or data. Can I use flashfire, select flash ota zip??
jeffrey81 said:
Im on 5.1, root and custom recovery how to flash it without losing anything? Root or data. Can I use flashfire, select flash ota zip??
Click to expand...
Click to collapse
In a DOS window with ADB and fastboot. Several tutorials are here on the board.
Btw. the radio is older than the Verizon build
tom1807 said:
In a DOS window with ADB and fastboot. Several tutorials are here on the board.
Btw. the radio is older than the Verizon build
Click to expand...
Click to collapse
LYZ28E (T-Mobile image) radio is MDM9625_104649.09.05.14R
LMY47D (Verizon OTA) radio is MDM9625_104446.01.02.98R
And the previous builds have even lower build numbers. Pretty sure the T-Mobile image/OTA radio is newer. Not that that makes it necessarily better, to be sure.
So this isn't specific to Tmobile? - Been waiting for this for AGES!!
brizey said:
LYZ28E (T-Mobile image) radio is MDM9625_104649.09.05.14R
LMY47D (Verizon OTA) radio is MDM9625_104446.01.02.98R
And the previous builds have even lower build numbers. Pretty sure the T-Mobile image/OTA radio is newer. Not that that makes it necessarily better, to be sure.
Click to expand...
Click to collapse
I can only judge by the filename
LYZ28E: radio-shamu-d4.01-9625-05.14+fsg-9625-02.93
LMY47I: radio-shamu-d4.0-9625-02.95
LMY47E: radio-shamu-d4.0-9625-02.98 (This was the Verizon Build)
LMY47D: radio-shamu-d4.0-9625-02.95
While the LMY47x Builds have a radio image of 83.4MB, the LYZ28E Radio is "only" 65.9MB
Not sure whether something missing or new compression algorithm
I'm just wondering where the open international images are at. Isn't very nexus for a us carrier to get them first.
imablackhat said:
I flashed the latest build on my Verizon device no issues. There isn't any ROM specific things for the nexus 6,. even though google says its tmobile only on their website. I think thats because maybe itllbe the only wifi calling supported ROM they release for the nexus 6.
Click to expand...
Click to collapse
I was wondering the same thing since all Nexus are the same. I am guessing that WiFi calling only works for T-Mobile so any other prepaid carrier that tries to use WiFi calling won't work, and since Google doesn't want any confusion they release it for only Tmo
Since I've been using it I haven't even seen a WiFi calling option
Sent from my Nexus 6 using XDA Free mobile app
imablackhat said:
Since I've been using it I haven't even seen a WiFi calling option
Sent from my Nexus 6 using XDA Free mobile app
Click to expand...
Click to collapse
I have my wifi calling settings as wifi preferred. You can change that by going to the more section under wireless & networks in your settings. Completely stock but rooted.View attachment 3334831