Database Users

[Q]Update

Hi
i'm on stock 4.1.52 but i try settings > about phone > systems updates, it said "your device is up to date!"
there is no 4.1.57 available for me to download? could it be i'm not using at&t simcard?
Help~

theres a lot of threads on these.
just search

any1 could help?

You're running an Atrix that came stock with 4.1.52? If so there might not be an update for you since that was a different build from the att release Atrix. 4.1.57 was only released to fix some bugs. 1.52 might not have had these so no need to update.
Sent from my MB860 using XDA Premium App

yes its come with 4.1.52... and i'm not using at&t could b there d problem?
well i found lots of same case like mine, just wanna to make sure it can update later on

I think the update is only for US devices. May have something to do with it.

then will b bad bad bad... no more update in d future...

Motorola forums had some information regarding the update only being for 4.1.26 phones. I was in beta for 4.1.57, and this issue was raised then from people who were on 4.1.52.

is stock 4.1.52 for bell atrix?

at&t not bell

looknsee said:
at&t not bell
Click to expand...
Click to collapse
ohh, so stores here in the US now have stock 4.1.52 instead of 4.1.26? damn... i was going to exchange my phone soon >.< #unluckyus

if any1 have 4.1.52 and wanna update to 1.57 do flash bk to 1.26, 1.57 will appear for u to update

looknsee said:
Hi
i'm on stock 4.1.52 but i try settings > about phone > systems updates, it said "your device is up to date!"
there is no 4.1.57 available for me to download? could it be i'm not using at&t simcard?
Help~
Click to expand...
Click to collapse
had same problem,I had to flash back to 1.2.6 in order to update to 1.5.7.Check the Android development forums under[GUIDE] Flash SBF to Motorola Atrix 4G.Hope that helps

New Download Available!!! Check your system update status

FYI Folks, I just did a system update check and there was one available...downloading it now.
Hope you all are as lucky!

If it is 1.86 then it has been out for a while.

Ok, now I'm panicking...it downloaded the firmware, asked me to install...I clicked yes and now I have a fuggin Triangle with an ! plus the android bot...WTF

No, it was 4.1.83.en.US
Do I need to unroot for it to install?

I am assuming your rooted? and deox? i would say you would have to revert to same procedure when 1.5.7 came out. Ie: restore bloatware/deox files

It downloads and reboots phone, it than starts extracting file and thats where it craps out.
K, looking at how to de-ox, new to android..only had this for 2 days.

Thanks for nothing liar. I have no update in NY. Also not to be a ****, but this should be in general unless your posting the sbf
Sent from my MB860 using XDA Premium App

Not lying...and if I knew how to do that I would...I was running stock rom, rooted and I had manually uninstalled some of the bloatware.
Anyone got a quick link to how I deox this?? no biggie ill look around.

jank0023 said:
Not lying...and if I knew how to do that I would...I was running stock rom, rooted and I had manually uninstalled some of the bloatware.
Anyone got a quick link to how I deox this?? no biggie ill look around.
Click to expand...
Click to collapse
I can say you aren't lying cause I am getting the message too. It says it is 1.83 but the weird thing is is that I am on the bell atrix but I used Seven's method to install GingerBlur so it says I am on att but I am actually on 1.4.2
Sent from my MB860 using XDA App

Update is available OTA in Portland, OR this morning. 3 people in my office have the Atrix and we all had the update available this morning.

They are probably going in batches guys just be patient it is rolling out in Dallas, TX i've been checking every day just got mine this morning takes about 15 minutes total and your on 2.2.2 and HSPA
Sent from my MB860 using XDA Premium App

jank0023 said:
Ok, now I'm panicking...it downloaded the firmware, asked me to install...I clicked yes and now I have a fuggin Triangle with an ! plus the android bot...WTF
Click to expand...
Click to collapse
If your new to android why would you not like the rest of us READ the fourms before 1. Posting in the wrong section 2. Ask a question that can be answered by doing a little research 3. Root without knowing how to revert back. We are all here to help as long as your not a donkey!!!!!

The chat support told me this:
The software version 4.1.83 is already being rolled out. It will be released by batches to all AT&T and Motorola Atrix.
Click to expand...
Click to collapse
I got it now..
Im on Rooted&Sideloading @ Stock 4.1.5.7 .
What do i need to do now?

System update is a go in Maui!
Sent from my MB860 using XDA App

Just got it in Orlando, FL

Wait so I'm going to go ahead and assume this wont work for the bell atrix. It says at&t in the message. Is it an international update?
Sent from my MB860 using XDA App

Ratchet556 said:
Wait so I'm going to go ahead and assume this wont work for the bell atrix. It says at&t in the message. Is it an international update?
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
No... this is not a Bell update.

Well for some reason it is updating without me doing anything.
Sent from my MB860 using XDA App

I got the update this morning for 1.83 here in NYC

jank0023 said:
Ok, now I'm panicking...it downloaded the firmware, asked me to install...I clicked yes and now I have a fuggin Triangle with an ! plus the android bot...WTF
Click to expand...
Click to collapse
I was getting the same error, I think it was because I tweaked my build.prop . I restored my build.prop from a back up version and now the update is going through.
only things I modified were build.prop, sideloading, root. I'm able to update without restoring to a previous stock image.

OTA 4.5.47 is published

i just click "System Update", what i got? Yeah, the OTA 4.5.47 is published.
but i flashed the HKT2W 2.3.4, so i can't directly install it.

Forum police, commence fire
We've obtained that OTA, and this is pretty old news.
Sent from my MB860 using XDA Premium App

i think even the 4.5.91 is released dude

sesame.qian said:
i just click "System Update", what i got? Yeah, the OTA 4.5.47 is published.
but i flashed the HKT2W 2.3.4, so i can't directly install it.
Click to expand...
Click to collapse
this is known bug, please mod close thread!

Ae3Boomer said:
i think even the 4.5.91 is released dude
Click to expand...
Click to collapse
Officially and over the air? When I check for system updates, it says that my system is up to date.

Bigred007 said:
Officially and over the air? When I check for system updates, it says that my system is up to date.
Click to expand...
Click to collapse
are you full stock?
If you are, that means they didnt puplished it yet..

i flashed back to 1.5 and updated using motorolas update software to 1.8.3 and still software is up to date for me no update avail. is there any other options for me to get gingerbread without risking bricking?

pitmansm said:
i flashed back to 1.5 and updated using motorolas update software to 1.8.3 and still software is up to date for me no update avail. is there any other options for me to get gingerbread without risking bricking?
Click to expand...
Click to collapse
Nope. You'll only hard brick if you use the OTA they pulled from the servers. If you use kens gb rom you can downgrade without worries.
Forgot to mention the hard brick only happens when you try and use an older SBF
Sent from my MB860 using XDA Premium App

Ae3Boomer said:
i think even the 4.5.91 is released dude
Click to expand...
Click to collapse
No it's not!

Oh I got ya. So now that I am on stock un rooted 1.8 I can just hit update and get gingerbread? I have een doing it with no joy on gingerbread.

pitmansm said:
Oh I got ya. So now that I am on stock un rooted 1.8 I can just hit update and get gingerbread? I have een doing it with no joy on gingerbread.
Click to expand...
Click to collapse
No.
The update is not available OTA yet.

problem solved lol..

[Q] another update past 3.2?

so i start using my xoom today, which is the wifi version, rooted on 3.2, and the box pops up and tells me there is another system update. this struck me as odd, because i never saw anything about another system update on xda or xoomforums or anywhere els. could this be an error? or is there really another update? and if there is an update, what are the new features?
thanks

Did you accept and install the update? If so, check your OS build number. The current version is HTJ85B.

alex94kumar said:
so i start using my xoom today, which is the wifi version, rooted on 3.2, and the box pops up and tells me there is another system update. this struck me as odd, because i never saw anything about another system update on xda or xoomforums or anywhere els. could this be an error? or is there really another update? and if there is an update, what are the new features?
thanks
Click to expand...
Click to collapse
If you are rooted on HC3.2, I'm not sure why you would get notification of the update, but that's the latest, and likely to be the last of the Honeycomb version.

okantomi said:
If you are rooted on HC3.2, I'm not sure why you would get notification of the update, but that's the latest, and likely to be the last of the Honeycomb version.
Click to expand...
Click to collapse
I hope there's a 3.2.1 version to be honest - 1 because it's a cool number sequence! lol - and 2 because I want them to push the support non-us keyboard layouts to devices (which moto said would put in their 3.1 update), including support for dorvak layout

Lothaen said:
I hope there's a 3.2.1 version to be honest - 1 because it's a cool number sequence! lol - and 2 because I want them to push the support non-us keyboard layouts to devices (which moto said would put in their 3.1 update), including support for dorvak layout
Click to expand...
Click to collapse
I hope so too, for your sake. It is a cool number sequence!

okantomi said:
I hope so too, for your sake. It is a cool number sequence!
Click to expand...
Click to collapse
we already had 2.3.4

I had the same thing fist time I booted to 3.2. I suspect it's just the ota 3.2 which was already downloaded to your Xoom and it's got a bit confused because it's not installed that download. Anyway, I rejected the update and it's not popped back up since.

burden010 said:
I had the same thing fist time I booted to 3.2. I suspect it's just the ota 3.2 which was already downloaded to your Xoom and it's got a bit confused because it's not installed that download. Anyway, I rejected the update and it's not popped back up since.
Click to expand...
Click to collapse
I'd have installed it if it were me... or at least got the update.zip if possible.
you never know - could be a 3.2.1...

Lothaen said:
I'd have installed it if it were me... or at least got the update.zip if possible.
you never know - could be a 3.2.1...
Click to expand...
Click to collapse
Hehe, would be good if it was but nah, it's just the ota update that I'd been putting off and had been downloaded prior to me flashing a 3.2 ROM.

burden010 said:
Hehe, would be good if it was but nah, it's just the ota update that I'd been putting off and had been downloaded prior to me flashing a 3.2 ROM.
Click to expand...
Click to collapse
Good reason for putting off the ota update!
C_K

Gingerbread Officially Released?

I'm confused. So is the official update out? Link http://forums.androidcentral.com/t-atrix/105531-downloading-update-4-9-51-not-beta.html
http://www.motorola.com/Support/US-EN/Android_Products/ATRIX-4G_Software_Update_Page

INSM Sin said:
I'm confused. So is the official update out? Link http://forums.androidcentral.com/t-atrix/105531-downloading-update-4-9-51-not-beta.html
http://www.motorola.com/Support/US-EN/Android_Products/ATRIX-4G_Software_Update_Page
Click to expand...
Click to collapse
Yes?
Thanks for joining us today, perhaps you could read some of the other threads?

mpalatsi said:
Yes?
Thanks for joining us today, perhaps you could read some of the other threads?
Click to expand...
Click to collapse
x( lol thanks so this isn't the leaked ****ty one? It will actually have decent battery life?

INSM Sin said:
x( lol thanks so this isn't the leaked ****ty one? It will actually have decent battery life?
Click to expand...
Click to collapse
lol, I don't know what exactly you mean by "****ty one" but the OTA update released today is official. I honestly can't give you a review on the battery life because I'm using the "****ty" Ninja Speed Freak v.0.4.5. but I've heard it's a tad better than froyo.

mpalatsi said:
lol, I don't know what exactly you mean by "****ty one" but the OTA update released today is official. I honestly can't give you a review on the battery life because I'm using the "****ty" Ninja Speed Freak v.0.4.5. but I've heard it's a tad better than froyo.
Click to expand...
Click to collapse
Ok thanks. right now im on cherryblur, is it safe to rsd back to stock then update OTA?. Or will it hard brick?

INSM Sin said:
Ok thanks. right now im on cherryblur, is it safe to rsd back to stock then update OTA?. Or will it hard brick?
Click to expand...
Click to collapse
Be more specific, what do you mean by stock? 1.2.6, 1.8.3?
Personally, I recommend you flash this:
http://forum.xda-developers.com/showthread.php?t=1182526

If you have an unlocked bootloader I wouldn't ota ****. You'll hard brick your phone. Unlocked bootloaders should flash dl'ed zip files only. I think you can flash Sbf but there's little point if you have cwm.
Sent from the coolest phone ever.

pukemon said:
If you have an unlocked bootloader I wouldn't ota ****. You'll hard brick your phone. Unlocked bootloaders should flash dl'ed zip files only. I think you can flash Svc but there's little point if you have cwm.
Sent from the coolest phone ever.
Click to expand...
Click to collapse
+1
Please follow my advice two post up.

ohh ok thanks to both of you again. ill flash that.

Leaked sh*tty one? I've had no problems and battery life I get 14 hours heavy to moderate use.
Sent from my [email protected] Atrix - OC 1.1ghz

chriscerv90 said:
Leaked sh*tty one? I've had no problems and battery life I get 14 hours heavy to moderate use.
Sent from my [email protected] Atrix - OC 1.1ghz
Click to expand...
Click to collapse
then your lucky. mine wouldn't even last 2 hours if i used it heavy. hopefully this update will fix it. i liked the froyo battery.

INSM Sin said:
then your lucky. mine wouldn't even last 2 hours if i used it heavy. hopefully this update will fix it. i liked the froyo battery.
Click to expand...
Click to collapse
There is something wrong with your battery, please visit an AT&T Device Service Center to get your battery replaced.

Just to be clear that the whole Atrix community doesn't equal AT&T customers. GB is only released as far as I know on AT&T. I am not aware of it being released on any other networks or countries yet.

jonstatt said:
Just to be clear that the whole Atrix community doesn't equal AT&T customers. GB is only released as far as I know on AT&T. I am not aware of it being released on any other networks or countries yet.
Click to expand...
Click to collapse
He has AT&T label under his profile, hence the response I gave him.

mpalatsi said:
Be more specific, what do you mean by stock? 1.2.6, 1.8.3?
Personally, I recommend you flash this:
http://forum.xda-developers.com/showthread.php?t=1182526
Click to expand...
Click to collapse
Can I upgrade this 4.5.91 RSD with unlocked Bl from my 1.83 gingerblur or I need to flash back to 1.83 offical rom before?+unlock Bl .
Thanks all

dvcpower said:
Can I upgrade this 4.5.91 RSD with unlocked Bl from my 1.83 gingerblur or I need to flash back to 1.83 offical rom before?+unlock Bl .
Thanks all
Click to expand...
Click to collapse
from what edgan said on that thread, you need to be on an 1.8.3 with unlocked bootloader, or you need to unlock your bootloader on the leaked 2.3.4, then flash this file. someone correct me if im wrong.

mpalatsi said:
There is something wrong with your battery, please visit an AT&T Device Service Center to get your battery replaced.
Click to expand...
Click to collapse
i think it was just the update. i read on other forums many other people having battery problems with the leaked 2.3.4. that, and while i was on froyo my battery was perfect.

mpalatsi said:
He has AT&T label under his profile, hence the response I gave him.
Click to expand...
Click to collapse
Your response was absolutely fine. Sorry, I just took slight exception to the subject line of the thread itself "Gingerbread Officially Released". This is not an AT&T sub-forum or network specific thread. I have seen evidence of other network/country users being confused why they have no update yet.
On a side-note, originally Motorola hinted the UK would get the update at the same time, but that doesn't seem to be true as of yet. However, the non-network branded version of this handset is not released until August 2nd, due to Motorola having exclusive tie-ins with Orange UK and T-mobile UK until then.

Well in trying to bring my atrix back to stock so that I could install the OTA update I messed something up and it wouldn't or couldn't get any data. No up and down arrows showing data. No browsing or anything. Everything else worked. I could't even wipe the phone without an error. I took it to ATT after removing super user and a few other things. They couldn't figure it out so they gave me a new phone.
I upgraded to 2.3.4 and I am loving it. The battery seems to last much, much longer. The camera is much better and over all I am loving it. I do want to root it but looks like I will have to wait until more folks get this authentic version for that.

learning curve
I am new to android, i come from iphone jailbreak land. Sorry, I am late to the party but I can't understand one piece of the puzzle so i can manage this myself. I am on att, 2.2.2, baseband N_01.7715p, 4.1.83, Rooted with ginger blur 4.5.
Why dont i want to update my baseband with the OTA? I have read much about downgrading with RSD and so on, but because i am arriving at halftime, no one really explains why anymore. Just need a little help with the learning curve, Thanks