Can someone tell me where i can download the factory firmware for GT I900OT? I upgrade to froyo 2.2 and now i loss my 850mhz gsm band and wants to go back to stock firmware cuz i no longer can pick up my network. Please help.
Sent from my GT-I9000 using XDA App
ignitionst said:
Can someone tell me where i can download the factory firmware for GT I900OT? I upgrade to froyo 2.2 and now i loss my 850mhz gsm band and wants to go back to stock firmware cuz i no longer can pick up my network. Please help.
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
Well calm that has a solution
1 install I9000UGJH2
http://www.samfirmware.com/WEBPROTECT-i9000.htm
with pit 512 and re-partition marked
and you will have the 850mhz back
2 Install jpo Froyo, not re-partition check
then place the file. tar in pda
Froyo will not lose now 850mhz
Any questions pm me
Greetings
Please post in Q/A... !
Ok i am gonna try it and i will tell you the results thanks alot.
ok tried it. but didnt work, it still says that i am on 1900mhz band i guess its my badluck. thanks anyway.
ignitionst said:
ok tried it. but didnt work, it still says that i am on 1900mhz band i guess its my badluck. thanks anyway.
Click to expand...
Click to collapse
Try this http://whrl.pl/Rcv3ri
I tried that option too and still cannot find my network. it says gsm 19000.
gsm mood limited.
HELP
Hi Everyone,
I have recently purchased a i9000t 2.1 from Telecom New Zealand, in my excitment I wanted to upgrade to 2.2 Froyo which I have done... however I now have reformatted the device to a i9000 using 2.2. i9000t should be 850ghz which now is a 900ghz phone which is the i9000. Im confused because I can still make calls
I cannot connect to and mobile data, Im a bit out of my depth and did not backup. Could someone give me some advise to what I should do. The phone info is as follows currently since the upgrade:
Model - GT-I9000 (should be GT-I9000T)
Firmware - 2.2
Baseband - I9000XXJPX
Kernal - 2.6.32.9 [email protected] #1
Build - FROYO.XXJPX
HELP
As you can see from the post above, I am stuck.
I am a battler, I cant seem to understand anything. If someone can give me a step by step you would be a champion. Everytime I seem to download the lastest firmware form SAMFIRMWARE its password protected.
HELP!
The password is samfirmware.com
Hope this helps ya buddy
Related
Hey guys,
I followed and read so many threads but I dont know what to do anymore.
I flashed to the 315_12332_00 firmware on my Streak that I bought unlocked in the Netherlands.
Baseband now is GAUSB1A131500EU build 12332 and everything works!! (I did not write done the original 1.6 baseband number so I dont know what that was)
Butt......when I rebooted my Streak the GSM/3G services quit.
If I check the settings it now says baseband unknown!!!!! (?)
There is no way to get the GSM/3G functions back except for flashing the 315_12332_00 firmware again!
After first boot it's ok but after a reboot my baseband is gone again!
I tried a lot to downgrade but I can not get it to work :-(
I wanted to flash to the original state 1.6 and wait for my OTA update or flash to Streak_309_0_00 firmware.
How can I make this happen?
Although WiFi works the device really feels bricked right now, saved a long time to buy it :-(
Someone please, please help me
Kind regards Passie
Me also i have the same problems no wifi
you mentioned u reflashed, but did u try a factory reset yet? that fixed some stuff for me
Elusivo said:
you mentioned u reflashed, but did u try a factory reset yet? that fixed some stuff for me
Click to expand...
Click to collapse
You mean like in the privacy setting page?
Yes, did that couple of times .
diab2010 said:
Me also i have the same problems no wifi
Click to expand...
Click to collapse
Well, my problems are not WiFi but GSM related.
Mut may still be because we flashed wrong firmware....
i would try the 309 update and a factory reset after flashing it
you may also need to flash the 309 recovery image before
diab2010 said:
Me also i have the same problems no wifi
Click to expand...
Click to collapse
Had the no wifi problem on 315 fw with my german streak.
Did the performance update and now I found wifi networks?
One of many strange Streak Froyo errors.
Greetings from germany
Sent from my Dell Streak using Tapatalk
Bricked my Streak
Well, did everything I thought I muust do but now its really bricked!
Cant come into recovery or flash mode.
When I press on button only the lights burn, not possible to use the volume or the camera modes....
Did I really bricked it now?
PLS help me....
passie42 said:
Hey guys,
I followed and read so many threads but I dont know what to do anymore.
I flashed to the 315_12332_00 firmware on my Streak that I bought unlocked in the Netherlands.
Baseband now is GAUSB1A131500EU build 12332 and everything works!! (I did not write done the original 1.6 baseband number so I dont know what that was)
Butt......when I rebooted my Streak the GSM/3G services quit.
If I check the settings it now says baseband unknown!!!!! (?)
There is no way to get the GSM/3G functions back except for flashing the 315_12332_00 firmware again!
After first boot it's ok but after a reboot my baseband is gone again!
I tried a lot to downgrade but I can not get it to work :-(
I wanted to flash to the original state 1.6 and wait for my OTA update or flash to Streak_309_0_00 firmware.
How can I make this happen?
Although WiFi works the device really feels bricked right now, saved a long time to buy it :-(
Someone please, please help me
Kind regards Passie
Click to expand...
Click to collapse
We need a way to get back to 309 firmware...... Mine is the same, no 3G, but I have GSM.
I gave it to a forum member with more knowledge,,,
Sent from my GT-P1000 using XDA App
Hello,
I am having issue updating from firmware 2.1 to 2.2 through official KIES.
I updated Kies to the latest version and when i plug my phone to my pc, and press update, it shows the msg. "this version cannot be updated" msg.
I did some research, but could not found the solution so here i am asking for your help in anyway.
the phone is - SGH - T959D
PDA - T959TLJJ2
PHONE - T959TLJJ2
ccs - T959TLJJ2
Thanks in advance.
Assuming you have one, you should edit your thread title, to indicate you have a TELUS Fascinate, which is very different than the VERIZON Fascinate (which is SCH-I500) - the TELUS one is GSM, ours (Verizon) is CDMA. I would put "[TELUS]" at the start of your thread title.
Most people here have a VERIZON Fascinate - and there is no 2.2 update available for it yet. Why Telus decided to call their phone the Fascinate is beyond me, considering it's a different model # and a different radio!
Oh man! I sure did call it didn't I! Go ask FargenDog. I'm sure he's be more than happy to help you.
Sent from my SCH-I500 using XDA App
times_infinity said:
Oh man! I sure did call it didn't I! Go ask FargenDog. I'm sure he's be more than happy to help you.
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
HAHA!
10char
I want to know if someone can help me upgrade to 2.2.1 or 2.2 froyo for Galaxy S:
I have the following:
JH4
JG1
JH6
Please what do I need to upgrade it and have it work!
Normal method on official firmware is to upgrade via Kies or take phone to service centre .
Non normal unofficial method is to upgrade via ODIN see multiple stickies first .
jje
But where to not mess it up, because tutorials here are weird
grmiller said:
But where to not mess it up, because tutorials here are weird
Click to expand...
Click to collapse
In that case dont try if you fail to understand you will break it . Contact your network/phone provider .
jje
grmiller said:
I want to know if someone can help me upgrade to 2.2.1 or 2.2 froyo for Galaxy S:
I have the following:
JH4
JG1
JH6
Please what do I need to upgrade it and have it work!
Click to expand...
Click to collapse
Pass this post
http://forum.xda-developers.com/showthread.php?t=887524
Hi Everyone,
Just got my new GS2 from Vodafone Australia.
Below is the frimware
hxxp://i.imgur.com/WlVEi.jpg
(cant post links yet)
And Keis says the following
PDA: KF2
PHONE: KF2
CSC:KF2 (VAU)
My question is - Does anyone want me to upload this firmware and if so point me to a guide.
wanted to get this out there before i root it and load a custom rom.
yep i certainly do my good fellow
God i hate the Spanish way of life! They're so lazy! I'm still on KE1 and no update via KIES. How did you find out about your update?
I didn't find out about it - thats the firmware the phone came with.
can anyone point me to a guide on how to backup and upload the firmware?
I'll upload the firmware later but I think this won't work for normal Galaxy S II phones as this is the GT-I9100T model.
I'm debating whether I should add it to the firmware thread because I don't want someone to accidentally flash this and brick the GT-I9100 device.
Beat me with a cricket bat and call me Andy! This SOB is nearly a GB is size!!!!!
WTH is in this firmware?
Crap, is this firmware good or something lol, i already loaded a custom rom on my one
it seems this firmware has problem browsing internet thru wifi.
Has no problem isung 3G but no thru wifi.
my other mobiles, notebook have no problem connect internet by using same router
I've added this to the carrier firmware thread in the dev forum along with kernel: http://www.multiupload.com/L13G7SSOVN
Please do not flash this on a normal GT-I9100 device, the firmware is for the GT-I9100T model and I don't know if it's compatible
Click to expand...
Click to collapse
Hey mate I'm in exactly the same boat as you, have an aussie vodafone sgs2, any chance you know the difference between the i9100 and the i9100t?
Also which kernel are you going to use? As im not sure which would be the correct one.
Thanks
Glenn
Sent from my GT-I9100T using XDA App
Hmm didnt notice the GT-9100T at first.
How/What should i check to compare with the normal 9100?
as for the firmware. since the model number is different can i still flash a custom rom and root it as normal?
I got no idea if anything is different and if it is it's nothing visible.
I'm not going to flash anything till I find out just to be safe
Sent from my GT-I9100T using XDA App
http://community.vodafone.com.au/t5/iPhone-and-Android/Samsung-Galaxy-S-II-T-Version/td-p/13787
The only difference is in the link.
Sent from my GT-I9100T using XDA App
Ok so looks like there is no difference hardware wise. Makes sense that the optus one doesnt care about the 850Mgz band but i thought all GS2s were quad band.
Didnt expect a difference between them
i guess ill just try flash some stock and custom roms and see what happens.
does it matter that the custom roms are build on KF4 and i only have KF2?
Not sure on that one, hopefully someone can answer that for us.
If you do flash one let me know which one you use.
Also I assume you haven't rooted either, as I said I am going to wait for the moment.
Sent from my GT-I9100T using XDA App
In poland and this just appeared on my Kies for update, so far don't see anything new
I dont think rootingis going to be a problem, im sure superoneclick or something will be fine.
but i dont quite understand how kernels and firmware work yet
not sure what i can replace with what etc
can anyone help me to find csc for optus or australia ? sorry i am posting it here
Intratech said:
I've added this to the carrier firmware thread in the dev forum along with kernel:
Click to expand...
Click to collapse
So if I flash these files with ODIN, will this return my SGS2 - i9100T back to stock and return its warranty status, or do I need reset counters or something like that?
Thanks
Hi there...let me shed some light. I've flashed the previous version (KE6) of the Vodafone AU rom not realising it was a Vodafone AU rom on my GT-i9100 and it did not brick my phone. Instead, after flashing, my phone now says its a GT-i9100T
According to a thread I read here, the only diff between the GT-i9100 and GT-i9100T is the SAR value. The GT-i9100T has a lower SAR value, which, if I am not wrong, means that it is less harmful to humans
Apart from that, the hardware is identical between the GT-i9100 and GT-i9100T. I have been using the previous version ROM now for 2 days and so far so good ;-)
Hello there, so heres the story.
My mate got Atrix 4g and apparently he was playing in the settings mode and _accidentaly_ locked the phone to USA band only. Needless to say his phone no longer is able to make calls or use any other of the network modes now.
My question is how can I update the radio so phone works with other modes again ? I googled and tried master reset and factory reset with no luck.
Then I found this Hope this is right for Atrix 4g ? and will that image if I flash it over current one will update/over write the current RADIO and hopefuly make phone usable again? Should i flash this “1FF-olympus-user-2.3.6-4.5.141-111212-release-keys-signed-ATT-US-GAS_NA_OLPSGBATTSPE_P012.sbf.gz” over current firmware?
Or is there a way to just flash new RADIO to phone and be over with it ?
Or do I need to root / unlock bootloader on current phone settings then push CWM and use that to flash radios? And if so where do I get said radios?
Or can i just use RDS Lite 5.6 and find some RADIOS and flash them from there?
Phone info
android version : 2.3.6
System version 4.5.141.MB860.ATT.en.US
Baseband
N_01.77.37P
Kernel version 2.6.32.9 [email protected] #2
Build number 4.5.141
Any info on this will be appreciated
thank you.
Just reflash the radio using fastboot. No need to flash a full sbf.
Hey. Not trying to Jack ur thread but i have a quick question that i didnt want to start a new thread for:
Can i install an interational radio firmware on my att atrix? I ask bc i took my atrix overseas and i cannot recieve 3g bc i think att cripples this frequency (900 i think).
Any help is appreciated
Sent from my ASUS Transformer Pad TF700T using Tapatalk 2
Yes you can, I flashed my AT&T model with UK radio
And does this uncripple the frequencies that att crippled? ?
Sent from my MB860 using xda premium
quetzalcoatl2435 said:
Just reflash the radio using fastboot. No need to flash a full sbf.
Click to expand...
Click to collapse
anaschillin said:
Yes you can, I flashed my AT&T model with UK radio
Click to expand...
Click to collapse
Can you guys tell me how to flash RADIO with fast boot ? Im not very savvy with whole motola stuff. So any pointers or how-tos or quick steps here will be very helpful.
And can I try with this radio ? http://forum.xda-developers.com/showpost.php?p=34350668&postcount=3