Database Users

[Q] Android on UK o2 HD2

Hi, I'm thinking of trying out Android, preferably Froyo, on my UK o2 HD2 which I've had for almost a year now.
My current ROM (1.72.206.3) is the most recent, stock o2 upgrade from the HTC Europe site which came with radio version 2.07.51.22_2.
Have any other o2 users tried, hopefully with some success, to run Android from their SD card using just the above ROM and radio versions? If so, what build of Android would you recommend?
Alternatively, if only a flashed non-stock ROM and HSPL installation will make this work, what would be my best way forward to safeguard my warranty and ensure I dont brick my beloved HD2?
Soz to sound like a noob but I've searched this forum but can't find any o2 specific threads like this one - plus I've been looking around XDA, HTCPedia, YouTube (where I can only find people with US T-Mobile handsets, not the European/UK model) et al for a few days now and feel like I'm just going in circles!
Many thanks for any help that might be forthcoming.

I'm on O2 UK.
I couldn't get Android to boot on Radio 2.07, so I installed HSPL 2.08 and flashed Radio 2.15. I kept the stock O2 1.72 ROM from the HTC website, and it works fine.
I'd recommend Bangsters build if you don't want a Sense-based build, or either FroyoStone or mdeejay's Froyo HD or Froyo Sense builds if you do want Sense.

Blimey, I didn't expect such a prompt reply but that's brilliant.
I wish I had raised my question a couple of days ago, as I've been trawling the internet for suggestions for a few days now, so many thanks for that.
I've already installed a dual-boot app so will install your recommended software tomorrow.
PS - I hope this is of help to others out there too.

Hi, I have a HTC HD2 but mine is out of warranty anyway so here it goes,
HSPL 2.08,
Windows ROM "Miri and Dinik V19",
radio 2.12,
sense android rom Mdeejay Evo warm V1.1 with the latest r7.6 kernel,
Non-sense android rom latest Biff froyo rom based on CM6 V1.0 with the same r7.6 kernel,
I do bump into some occasional problems with android but nothing major, hope this helps.

it's all over the forum, but keep in mind you need at least a radio 2.08 to run android. oh, and for a non-sense build, i'd like to recommend hyperdroid v1.6

welcome to android! The way the HD2 is meant to be
latest radio is 2.15, update your hspl to the highest.
This might be personal preferrence but i find desire roms run better on my phone than evo roms
Im using NDeeJays 3.6 Desire HD rom, this rom is now fast and stable with the latest features, it is however lacking the camera and ereader...if you can live with out these, its the best option in my opinion.
If you need your camera have a look at shu8is SHUBcraft 1.5 CM6 final.It is due an update soon as dev has been away for a while but that rom is rock solid and i used as my only rom until i upgraded to the desire HD rom.

Okay, so at the expense of sounding like a numpty, it appears I need to do the following:
1. Sync my phone with my PC as usual.
2. Copy a version of my current 1.72 o2 ROM to my SD card (not sure where in particular though - in the root maybe?) having renamed it leoimg.nbh so that I can uninstall HSLP should I brick my phone and need to return it to o2 under warranty.
3. Install HSPL 2.08 or higher. I have HSLP3-PKG on my desktop ready for this purpose, so hope this should suffice.
4. Once the HD2 restarts then install a new radio ROM, version 2.08 or higher (I have 2.15 ready to go)
5. Reboot the phone again and create a folder called Android in the root of my SD card, and copy over my choice of Android software to same.
6. Restart the phone yet again, navigate using file explorer to the Android folder then run CLRCAD.EXE and thereafter run HaRet.exe, then wait a few mins for android to launch on my HD2.
It all sounds (too) straightforward in hindsight. Even though I've managed to install the brilliant CHTEditor and more on my phone and tweak the registry to some extent, somehow the installation of android seemed quite daunting until now. But I'll give it a go asap and, in the meantime, thanks to those of you who have taken the trouble to contribute to this thread and help me out.
Cheers!

Hey
I am like yourself on HD2 O2 UK. My current setup is in my signature. What I have found though is no matter what setup/android rom I use, I always get regular drop in data. I don't know if any other setup has worked for any of the users where they have no interruptions with data.
May I also suggest getting a task killer and setcpu from market for help with decent battery life.
Nik

Up until recently I always used RMNET builds as the data is much more reliable. However, i upgraded to 2.15 radio and this seems to have virtually eliminated PPP disconnects for me.

Thanks, i will give that a try.
Sent from my HTC HD2 using XDA App

Hey dazzyb2k3
May I ask what RMNET rom do you use?
Nik

Hi, just to say that I managed to install HSPL and radio ROM 2.15 and FroYo was running v.nicely thank you... up until I had an error message advising that "LauncherPro beta has expired" and asks that I download an updated version - which is not easy given that all the phone will let me do is go into either Silent or Airplane mode, reboot or power off (!)
I see that other FroYo users have reported this issue as a major pain in the arse, so I'm trying to see how I can overcome this issue at the mo. However, I'd suggest that others bear this in mind when choosin which Android software to download (plus the fact that, at the mo, I still prefer my HD2's WinMo 6.5, HTC Sense and CHTEditor after all!)

markymunkeypants said:
Okay, so at the expense of sounding like a numpty, it appears I need to do the following:
1. Sync my phone with my PC as usual.
2. Copy a version of my current 1.72 o2 ROM to my SD card (not sure where in particular though - in the root maybe?) having renamed it leoimg.nbh so that I can uninstall HSLP should I brick my phone and need to return it to o2 under warranty.
3. Install HSPL 2.08 or higher. I have HSLP3-PKG on my desktop ready for this purpose, so hope this should suffice.
4. Once the HD2 restarts then install a new radio ROM, version 2.08 or higher (I have 2.15 ready to go)
5. Reboot the phone again and create a folder called Android in the root of my SD card, and copy over my choice of Android software to same.
6. Restart the phone yet again, navigate using file explorer to the Android folder then run CLRCAD.EXE and thereafter run HaRet.exe, then wait a few mins for android to launch on my HD2.
It all sounds (too) straightforward in hindsight. Even though I've managed to install the brilliant CHTEditor and more on my phone and tweak the registry to some extent, somehow the installation of android seemed quite daunting until now. But I'll give it a go asap and, in the meantime, thanks to those of you who have taken the trouble to contribute to this thread and help me out.
Cheers!
Click to expand...
Click to collapse
Yes! This is all correct! except don't name it leoimg.nbh, until you want to flash it back to stock (rare ;P) otherwise it will flash it everytime you enter bootloader!

markymunkeypants said:
Hi, just to say that I managed to install HSPL and radio ROM 2.15 and FroYo was running v.nicely thank you... up until I had an error message advising that "LauncherPro beta has expired" and asks that I download an updated version - which is not easy given that all the phone will let me do is go into either Silent or Airplane mode, reboot or power off (!)
I see that other FroYo users have reported this issue as a major pain in the arse, so I'm trying to see how I can overcome this issue at the mo. However, I'd suggest that others bear this in mind when choosin which Android software to download (plus the fact that, at the mo, I still prefer my HD2's WinMo 6.5, HTC Sense and CHTEditor after all!)
Click to expand...
Click to collapse
Are you using Shubcraft?
If so, there's a fix for that here.....
http://forum.xda-developers.com/showpost.php?p=8698216&postcount=7589

Sorry, should have mentioned earlier that I was using a download called Mattcfroyosense1.7ppp for my Android set-up, and I presume this incorporates an (out-of-date?) loader to kick-start things.
I only installed it late Weds evening and all seemed fine for 36hrs till this confounded error msg started appearing.
Any suggestions? (my first thought is to delete the Andoid folders from my SD card and start from scratch, and maybe download the LauncherPro upgrade asap from Marketplace should it srin back to life..?)

There is a version 1.8 if i'm not mistaken http://forum.xda-developers.com/showthread.php?t=736545
Although I haven't used any other build than darkstones sense builds so never used launcher pro, can you not uninstall launcher pro and use sense as mattc's is a sense build?

Btw, I have looked up that link you kindly supplied and it looks promising (in fact I have found LauncherPro-0.8.1.1 which I hops should be up to the job) but I'm sorry to say that I'm dumbfounded as to where to install it on my device or storage card - the link supplied suggests I need to "make a new directory named "app" in your /root/system/ directory, then copy the Launcher Pro app that I attached to this message to your /root/system/app/ directory. Then reboot and everything should be OK" but I just cannot locate the appropriate folders to drop this .apk file into...

i only stumbled across this today trying to fix the HTC camera issue.
The way i accessed it was to download "super manager" from the market place and used its file manager. The root is actually a higher level than the sd card which can only be accessed with a root file manager.
There is another way to "push" it but thats a bit beyond my knowledge if i'm honest.

Yay! People from the UK on O2
Its such a pain that the search won't let you use 'UK' and 'O2'
What are people using at the moment then?
I'm using,
radio: 2.15.50.14
wm: Energy Rom 21683
Android: FroyoStone Sense - V3.2
I get music stuttering with the above, regular data drops and BSOD every so often on a restart
I then upgraded the kernel to hastarin r8
The only thing I get now is absolutly no data! everything else is perfect though
I tried this ril wrapper for pppd disconnections, new v0.3 but now I get no data and no signal either
What have you guys got?
I would have posted links to all the above but apparently I''m not allowed

I'm also having no data problems on my o2-uk hd2. it was a lot better with old builds.

[Q] Have HD2 running windows, Want Android Help

Ok.....First I will admit I am new at all of this, second , I am a girl. Not that, that is a big deal but you get my drift. I have spent the last 24 hrs trying to find a good version of android 2.2 to install on my HTC HD2. I have tried quite a few versions, only one has installed that was the FroyoSense. However, none of my status lights worked, personal ringtones didn't work, picture preview didn't work. I create themes for the market and wanted to run android on this phone to help me out with my themes.....can anyone point me in the right direction? Thank you so much in advance.......that is if anyone is up as late as I am.... : )
Mickey

Hi Mickey,
The best builds I've used are NexusHD2 1.8 (if you want completely stock Android) and MDJ Froyo HD 4.6 (if you like the HTC Sense look). You will need to flash your HD2 using ActiveSync with a new '.50' radio. They can be found here (2.15.50.14 is the one I'm using). Without the new radio you'll be unable to boot.
I'm currently running MDJ Froyo HD 4.6 and it's quick and stable with pretty good battery life. I experience trouble with 'robot voice' when calling on NexusHD2, however everything else works just fine. Once you get a bit more confident you can have a play with custom kernels and whatever else.
To install one of these builds follow the link and download the package, then extract everything. I take the MicroSD out of my phone and use a card reader plugged into my PC to format the MicroSD FAT32. Quick format works fine for me. Then I copy the files into a folder called 'Android' (do not use all capitals) in the root of the SD card. Then boot into Windows, use file explorer to find your 'Android' folder and run CLRCAD.exe (nothing will happen - that's fine). Then run HARET.exe, click 'yes' when told about an unknown publisher, and it will proceed to boot you into Android.
First boot may take up to 10 minutes, as the device creates a virtual 'phone memory' for your apps and sets up the kernel. Once it's booted and at the lock screen, leave it for fifteen minutes. After fifteen minutes, unlock and power off your phone completely. Rinse and repeat the booting process, and your Android should be working perfectly.
I'll keep an eye on your thread in case you have other questions. Make sure you flash that radio first, or you'll be in all kinds of trouble.
Good luck!
Justin

This is exactly what ive been looking for Juzz. can you elaborate on activesync and the radio more? installation, etc? and that froyo work with gen. y? If not, whats a good dual boot?

Truaim,
ActiveSync isn't actually called ActiveSync anymore, it's Windows Mobile Device Center on Vista and Windows 7.
When you connect your HD2 running Windows to your computer with the USB cable, you are asked (on the phone) what kind of mode you want to select. ActiveSync is first, then USB Mass Storage, Internet Gateway etc. ActiveSync is the mode where you can update new firmwares, install HardSPL, and (if you use them) sync Outlook calendars, mail and contacts.
I am assuming you have HardSPL installed, which you use to flash custom Windows ROMs? It's not necessary (strictly speaking) for Android, but makes flashing radios easier. Let me know if you need me to cover that more.
Android on the HD2 only works with radios that follow the '2.xx.50.xx' format. They MUST have that .50 or you'll run into trouble. Flashing a new radio is just like flashing a new ROM. You download the installer, extract and run CustomRUU.exe, which launches the update process. Your phone needs to be in ActiveSync mode for this to work.
If you follow my previous link to the radio thread, you'll find all the .50 radios at the top. I'd go with the 2.15.50.14 radio first. Download it, connect your phone, unzip and run CustomRUU. Then follow the prompts. Your phone will do a few odd things, reboot and be running the new radio. It doesn't change Windows in any way, shape or form. It just updates your radio. You won't see any changes, except in the 'About' page where it lists the radio version.
Hope this helps!
Justin

Also, I run the 1.66.405.2 Generic WWE HTC Windows 6.5 ROM. I don't use any kind of bootloader (I'd rather be sure CLRCAD was run myself). There are a couple of stripped-down Windows ROMs floating around, but I find battery life isn't affected a whole lot by running a regular Windows ROM.
Cheers.

Just in case the radio package you get doesn't have CustomRUU...

The most recent stock ROM (3.14) is reported by many to be a very good ROM for running Android with. I use it myself and have had 0 issues. (It comes with radio 2.15.50, which is great for Android.)
It also means that, for once, my phone is in a perfectly "legit" state and I could send it off for repair without worry.
And I'm sorry, but there are no "best builds" for Android. The ones that are regularly updated are all running very well, so it depends what you want from it. I'd recommend ignoring recommendations and trying a few different ones yourself, as that's the only way you'll find what you like.

I bought my HD2 used, so I wont be sending it in. in fact, if it were possible id remove windows entirely. where can i see if i already have that radio installed?

Truaim said:
I bought my HD2 used, so I wont be sending it in. in fact, if it were possible id remove windows entirely. where can i see if i already have that radio installed?
Click to expand...
Click to collapse
Reboot your phone and look out for the info in the bottom left of the screen when you get the first white screen with HTC logo. The number next to R is the radio version you have.

My radio is currently 2.8.50.08... is this compatible with mdj sense 4.6 suggested above?

Should be fine mate. Give it a whirl.
Good luck!

my radio is 2.05.51
will this work or do i need to go back to 2.xx.50 ?

stramvaier said:
my radio is 2.05.51
will this work or do i need to go back to 2.xx.50 ?
Click to expand...
Click to collapse
Please read up about subjects before asking questions in future.
It is stated all over the forums that you need at least 2.08.50 (don't use a .51 radio).

[Mar 04][Q] Android on SD

Hi, this is my first post here
I've been here for a long time (well didn't have a handset so didn't find the need to join...)
I read through many articles and learned a lot from this forum
Last weekend I got my T-Mobile HD2 and I proceeded to install custom rom soon after
(latest Energy rom by NRGZ28- thanks)
The rom is awesome, it's just that I wanna try out android on my phone also...
I decided I'll try the SD first
So I followed a guide just downloaded the rom I want (MCCM GB V2.0 Gingerbread HoneyComb Sense theme) unzip, then copy to the root of my sd, run clrcad (don't know what he meant by working sound- I heard nothing) then run haret....
Then I am always stuck at the green letters screen forever, never get further...
I'm not sure what is wrong
I looked through all possible things
I did HardSPL4 and now has HSPL2.08, I got a custom rom
The only thing I did not change and think might be the problem is the radio...
my version is 2.10.50.26
Would flashing an updated radio make my android on sd work?
Is this "Leo_RADIO_2.15.50.14**" ok for my HD2? (on http://forum.xda-developers.com/showthread.php?t=611787)
Thanks for the help nice to talk to everyone~

gameg2l said:
Hi, this is my first post here
I've been here for a long time (well didn't have a handset so didn't find the need to join...)
I read through many articles and learned a lot from this forum
Last weekend I got my T-Mobile HD2 and I proceeded to install custom rom soon after
(latest Energy rom by NRGZ28- thanks)
The rom is awesome, it's just that I wanna try out android on my phone also...
I decided I'll try the SD first
So I followed a guide just downloaded the rom I want (MCCM GB V2.0 Gingerbread HoneyComb Sense theme) unzip, then copy to the root of my sd, run clrcad (don't know what he meant by working sound- I heard nothing) then run haret....
Then I am always stuck at the green letters screen forever, never get further...
I'm not sure what is wrong
I looked through all possible things
I did HardSPL4 and now has HSPL2.08, I got a custom rom
The only thing I did not change and think might be the problem is the radio...
my version is 2.10.50.26
Would flashing an updated radio make my android on sd work?
Is this "Leo_RADIO_2.15.50.14**" ok for my HD2? (on http://forum.xda-developers.com/showthread.php?t=611787)
Thanks for the help nice to talk to everyone~
Click to expand...
Click to collapse
Ha I guess you did not like the first option, so I will edit the whole post.
Running Andriod from SD is very simple as long as you follow the instructions to the T. If the Andriod folder you copied to your SD card has another folder in it that you have to open to get to CLRCLAD and HARET then you need to copy that folder to the root of your SD card. It is also important the name of the folder is Andriod. The first time you boot the Andriod it can take up to ten minutes sometimes cause it has to creat folders, files, and pathways. So maybe you are not giving it enough time to boot all the way up beforeo you hit the reset button or do a battery pull. Your SD card also needs to be formated correctly you want to format it usimg Fat 32, please make a back up copy of your card also if you reformat it as it will wipe it clean. Last but not least you may just have a bad download. Try redownloading the build and recopy it to your SD card then run CLRCAD and HARET.
The only thing a radio will do is cure robot sounding voices during a phone call while running Andriod but most builds now have that solved and are compatible with the current radio 2.15.50.14. Also when you touch on CLRCAD you will see or hear nothing it enables the sound on the Andriod build.
Last but not least being you have a TMOUS (T-Mobile) HD2. Be adviced that you most flash a radio version that has a 50 in the third set of numbers like 2.xx.50.xx. Do not flash a radio that has a 51 in the third set of numbers like 2.xx.50.xx. or a radio that looks like this 2.04.50.xx or 2.05.50.xx as they will brick your TMOUS HD2 reindering it usless for nothing but a paper wieght. And the only way to unbrick a HD2 is with a JTAG and a ORT wich will cost you and you will have to take your HD2 apart to fix.

O_O is the issue that difficult?
I don't mind calling though
Thanks

gameg2l said:
O_O is the issue that difficult?
I don't mind calling though
Thanks
Click to expand...
Click to collapse
I sent you s PM, look at the top right hand corner of your screen and you should see you have a mwssage click on it.

Any luckwith getting it to boot yet?

Thanks!!! I downloaded the newest updated Rom and it worked lol I was too drawn into it so completely forlorn to post here (only pmed)
But beheld this is nice
Sent from my HTC HD2 Gingerbread using XDA App

gameg2l said:
Thanks!!! I downloaded the newest updated Rom and it worked lol I was too drawn into it so completely forlorn to post here (only pmed)
But beheld this is nice
Sent from my HTC HD2 Gingerbread using XDA App
Click to expand...
Click to collapse
I use a Gingerbread build too.

Some Advice Please

So a friend has ah HD2 where his old colleague flashed Android, dualboot. This was maybe around Feb. Now he wants a newer version on as the froyo version hes got drains battery fast and wants a new rom.
Ive never flashed a HD2 befor but have done other phones incl hero, desire, desire hd, o2x, sgs2.
Now this looks confusing with dual booting mode with nand, magldr, clk etc but given instructions I should be fine
So how would I update hes existing Android version to say miui?
Can I delete winOS totally and have Android?
Possible of completly bricking phone beyond repair?
Any recommendations etc
Thanks

It's dualbooting Android and WinMo 6.5 or WP7?
Oh. Well, it doesn't make a difference. Find a SD build, download, on SD delete Android folder, unpack new one in place of his old Froyo, ta-dah. Done. No chance of bricking, no playing with clk/magldr or anything.
I hope he made a backup of his stuff.

Spaqin said:
It's dualbooting Android and WinMo 6.5 or WP7?
Oh. Well, it doesn't make a difference. Find a SD build, download, on SD delete Android folder, unpack new one in place of his old Froyo, ta-dah. Done. No chance of bricking, no playing with clk/magldr or anything.
I hope he made a backup of his stuff.
Click to expand...
Click to collapse
What SD build? How to unpack? Does this delete winOS totally? more info please

ermacwins said:
What SD build? How to unpack? Does this delete winOS totally? more info please
Click to expand...
Click to collapse
No, it does not delete wm6.5 completely if you are running android from the sd card. If you wish to keep wm6.5, install a new android sd rom like you did previously. The dev of new rom will most likely state whether the data.img is compatible coming from another rom.

seanyuan62 said:
No, it does not delete wm6.5 completely if you are running android from the sd card. If you wish to keep wm6.5, install a new android sd rom like you did previously. The dev of new rom will most likely state whether the data.img is compatible coming from another rom.
Click to expand...
Click to collapse
I didn't flash his phone, it was his ex colleague. He asked if its possible, to completely remove Wimp and just have Android. Is this possible with miui?

Sure. You will have to install magldr or clk, flash a new radio probably and HSPL.
Then find a NAND build that suits you best and follow the instructions to install it.

Spaqin said:
Sure. You will have to install magldr or clk, flash a new radio probably and HSPL.
Then find a NAND build that suits you best and follow the instructions to install it.
Click to expand...
Click to collapse
How would I know if its magldr or clk? Also after deleting winOS is possible to comeback anyhow as a failsafe?

If there is just pure WinMo 6.5, there is no magldr or clk yet. You have to choose which one would be better.
OK. If you want to install Android and ONLY Android, clk would be better. If you wanted to have WP7 or WP7 + Android, you would have to choose magldr. But you don't, so clk is a better option.
It's VERY easy to come back after failing something. Except installing a wrong radio to a wrong device, of course. Or if something is broken inside. And it's hard to fail anything anyway, but... well, is possible.
Ask any questions regarding these thing, I will try to explain you these things and show you tutorials. Of course, finding everything for yourself would save us both time and would be more rewarding, but don't worry, I will not bite you.

[Q] Easy one stop Android?

Ive for an HD2 im going to give to my friends girlfriend to replace her current T-Mobile phone thats junk and has a cracked screen.
I have installed HSPL 2.08 to match the stock SPL, but now ive come to a stand still.
I only have a 4GB card right now (unless someone can tell me how to format one from a WP7 device, Windows wont recognize it).
Im getting confusing info about the US devices and radio's as well.
Isnt there a one step install for Android to SD card? Even the 'easy for noobs' directions has many confusing steps.

Unfortunately, no. The easiest way would be sd android run with haret from within windows mobile, but even that requires an updated radio.
Just put windows mobile back, update the radio (which is relatively easy if you read enough) and drop any sd build on your sd card and then click on "clrcad.exe." then "haret" from File Explorer on your phone.
That's the easiest.

Never took WinMo off but i did manage to get a 16 gig card to use. How do i tell what radio it has?

Go into settings > software information > radio.
That's it.
I recommend flashing 2.15.50 (if you don't already have one that is 2.08 or above)

2.15.50.14? Cause thats the one i've seen said 'use' and 'dont use'.

Ok, its got that radio on it. So i guess im good and can just find an image to put on the SD.

Just go into the SD android development, pick a ROM, download it and extract it into /Android/ on your sdcard.. then follow my first post.

Which Android version it is more suitable for the HTC HD2
I have an HTC HD2 running the original windows professional 6.5. and I m interested to install the Android OS in order to get
a faster an easy OS.
But after reading several posts and watching a lot of vieos on Youtube I feel lost which Android version it is more suitable to my smartphone
and if it is possible to get a little bit of more speed I woul be very happy.
As far as I understand i will require to burn or change my ROM first and then install the Android. But there are the Rafdroid version, the Ice Cream the Jelly Bean and so. Today I read a notice somewhere that a a guy have obtained 1.66 Ghz of speed at the HTC HD2 that it is amazing.
A little of speed would be great but the most important it is to have the Android because it is easy and may allow me to view videos ouside
youtube.
I will appreciate you advice and comments how to decide about the Android version.

Marvlesz said:
Just go into the SD android development, pick a ROM, download it and extract it into /Android/ on your sdcard.. then follow my first post.
Click to expand...
Click to collapse
Well, i did, i found AmeriCanAndroid. But when i launch Haret it says it cant find the zImage which is not in the NativeSD folder, but in the kernal/boot folder. Also in following the guide for this on YT, when i copy it to the SD its only 123 megs, not 232 like in the video. So im lost as to whats going on.
Also, my ex-wife had an HD2 briefly that had Android on it that you could launch from a shortcut on the home screen. Any idea how to do that?

Ok, i got this resolved. Once i realized MAGLDR wipes WinMo off i found an EXCELLENT video on YT for dual booting WP7 and Android. Thanks to the guy who made it, very thorough and had the links to the required software in the comments.