Related
after waiting for a while to see if windows 7 would be released publicly for this phone, and after finish paying off the phone i have decided to just say "Screw you microsoft" and go with an android build, but i have NO idea where to start with this.
The basics of my knowledge of cell phones is that i have put cookies home tab editor, and a few extra things on my phone, i have backed up my phone a couple of times, and i even done the official t-mobile upgrade for my phone, i know a decent amount about computers in general, but haven't had the chance to play around with my phone and it's OS like i have with a computer, being that my phone is very important to me because of my work, and that i don't have a house phone, only my cell phone.
So, could someone at least direct me to all of the forums with the best downloads for the andriod OS, and extras that i will need to get android working on my HD2?
and am i able to run cookies home tab on my HD2 even if it has android OS?
her u go
http://forum.xda-developers.com/forumdisplay.php?f=735
and u will need
hspl2 or 3
just try the search option and u will get all the information about it ..
if you are ,form gemany then just try this link
http://www.pocketpc.ch/htc-hd2-android/100639-installationsanleitung-tutorial.html
if not
try search on hspl2 or 3
I'm from the USA, i have t-mobile, updateing to the android will still alow basic calling on t-mobile's edge, gprs, and 3-g networks right?
yea, i've been looking through that forum thread already, i can't find any leadway on what to do, i see about kernels and stuff, but i don't know what all i need to download in case to get the most "Stable" android system, i see there is a linux build, and i guess hastarin is another one?
Is Linux Stable now?
her u go ( hspl2 )
http://forum.xda-developers.com/showthread.php?t=611433
and ya everthing is working well try for exampel this builds ..
they work fine
[UPD][BUILD][27.10.10]Mdeejay eVo Sense v. 2.3 rEVOlution [kernel:hastarin R7.7]
[UPD][BUILD][07.11.10] MDJ FroYo Sense Revolution v.1.5 [kernel: MDJ S1]
and dont forget this hier is an step by step information
http://forum.xda-developers.com/showthread.php?t=732380
hope that will help u
Hmzz... i don`t understand it`s said in other posts that you don`t need hspl2 or 3 if you have ROM 3,14 in this post it is said that it`s needed...
ogizz said:
Hmzz... i don`t understand it`s said in other posts that you don`t need hspl2 or 3 if you have ROM 3,14 in this post it is said that it`s needed...
Click to expand...
Click to collapse
Don't quote me on this, but from what I've heard HSPL2/3 indeed are not required, but if you somehow screw up your phone without them, you're basically ****ed. HSPL2/3 should always (well, most of the time) be able to revert you back to stock.
ogizz said:
Hmzz... i don`t understand it`s said in other posts that you don`t need hspl2 or 3 if you have ROM 3,14 in this post it is said that it`s needed...
Click to expand...
Click to collapse
You don't need to upgrade HSPL at all. What you must have (100% MUST!!) is a radio version 2.08 or later (2.x.50 versions, NOT 2.x.51 versions).
Until the recent release of the official 3.14 ROM there was no other way to upgrade the radio to the minimum required other than custom flashing, which requires a HSPL upgrade. (Not 100% sure that 3.14 was the first, but I believe it was).
Either way, it's the radio that's crucial to Android - not HSPL.
(I ain't no Android chef or dev - this is just gleaned from what I've read on this forum, so may not be 100% accurate, but it's never failed for me.)
ok, mine Radiois 2.15.50.14, so that means i don`t need to update radio, rom is 3.14.479.2(wwe) it`s stock one...
I have another question then: after installing android on sd card, is there any changes made to stock wm rom or else? or it`s just installing android on sd, and after formating sd card everything will be stock? thnx...
ogizz said:
ok, mine Radiois 2.15.50.14, so that means i don`t need to update radio, rom is 3.14.479.2(wwe) it`s stock one...
I have another question then: after installing android on sd card, is there any changes made to stock wm rom or else? or it`s just installing android on sd, and after formating sd card everything will be stock? thnx...
Click to expand...
Click to collapse
Nothing else to do - just copy the android folder to your card and then run the 2 apps (clrcad & haret). Personally, I use a bootloader that runs with Windows, so when I reboot my phone I get the option to run Android or "run" Windows. (Windows is obviously already running at that point. It just closes the app if you select Windows.)
You don't need to format your card to go back to your current config. Just reboot your phone and don't run Android.
johncmolyneux said:
Nothing else to do - just copy the android folder to your card and then run the 2 apps (clrcad & haret). Personally, I use a bootloader that runs with Windows, so when I reboot my phone I get the option to run Android or "run" Windows. (Windows is obviously already running at that point. It just closes the app if you select Windows.)
You don't need to format your card to go back to your current config. Just reboot your phone and don't run Android.
Click to expand...
Click to collapse
Thank you, now it`s easier to understand everything, i just thought that clrcad & haret, is needed to run only on first use, and it makes some changes to stock config of hd2. sorry if i misunderstood smthng, i`m new to android on hd2.
ogizz said:
Thank you, now it`s easier to understand everything, i just thought that clrcad & haret, is needed to run only on first use, and it makes some changes to stock config of hd2. sorry if i misunderstood smthng, i`m new to android on hd2.
Click to expand...
Click to collapse
No worries mate - glad to help. Hope you get it running - Android's sweet
rather than start a new thread, i have a supplementary question.
It's hard to search for this question, so apologies if it's been covered.
Is it better to run a stripped down custom WM ROM to boot android? or will a stock WM ROM (with the correct radio etc.) run Android just as good?
Does it make a difference?
(I just got a stock HD2 with 3.14 ROM and 2.08.50... radio...)
Hi. i bought an htc hd2, but i did not like windows, so my brother installed android on it. i belive it is MDJ evo ROM, but i dont know what radio i am using.
-anyway, i noticed android is using about 70% of my battery, is this normal? (my older android phone used like 10%) does changing rom help?
1. If i want to change my rom, all i have to do is replace my old one on the SD card?
2. If i backup using titanium, how do i get the restore-file on my new rom?
3. a friend of mine is buying hd2. do he need to flash hes phone to be able to install android? ive read a "definitive guide to android" here on the forum, but from a "new user" standpoint its kinda hard to understand.
So it is:-flash phone, -install rado, -drag/drop android on sd card?
Weencent said:
Hi. i bought an htc hd2, but i did not like windows, so my brother installed android on it. i belive it is MDJ evo ROM, but i dont know what radio i am using.
-anyway, i noticed android is using about 70% of my battery, is this normal? (my older android phone used like 10%) does changing rom help?
1. If i want to change my rom, all i have to do is replace my old one on the SD card?
2. If i backup using titanium, how do i get the restore-file on my new rom?
3. a friend of mine is buying hd2. do he need to flash hes phone to be able to install android? ive read a "definitive guide to android" here on the forum, but from a "new user" standpoint its kinda hard to understand.
So it is:-flash phone, -install rado, -drag/drop android on sd card?
Click to expand...
Click to collapse
1: Yes, Android is contained in it's own folder on the SD Card, if there's nothing else you wish to carry over to the other build, format the card and put the new build on, then boot in the usual way.
2: titanium backup creates a folder called rather unsurprisingly "TitaniumBackup" on the root of the SD card, copy that over to the new build, install Titanium and select restore and it will give you a list of options to reinstall. Google for the wiki on the program and it goes into a lot more detail about how to do all the steps.
3: Yes, pretty much. Although some users will tell you that you'll need a newer SPL version, so long as you're using the latest stock winmo rom the spl is not needed and radio also get's updated along with it, then it's just a case of booting android.
ty
Thanks for the great reply =)
what is HARET? i have a dual boot option on my hd2, is this buildt in the rom itself?
Weencent said:
Thanks for the great reply =)
what is HARET? i have a dual boot option on my hd2, is this buildt in the rom itself?
Click to expand...
Click to collapse
HaRet is the hardware emulation invoker for Android to boot. ClrCAD is the audio part of android as well, you need to boot clrcad, then haret on all builds else you'll get no audio.
Lots of roms now have dual boot options, they are just an automatic clrcard/haret loader and some come built into roms, yes. Else they are just a cab file you can install yourself.
Hi, this is my first post here
I've been here for a long time (well didn't have a handset so didn't find the need to join...)
I read through many articles and learned a lot from this forum
Last weekend I got my T-Mobile HD2 and I proceeded to install custom rom soon after
(latest Energy rom by NRGZ28- thanks)
The rom is awesome, it's just that I wanna try out android on my phone also...
I decided I'll try the SD first
So I followed a guide just downloaded the rom I want (MCCM GB V2.0 Gingerbread HoneyComb Sense theme) unzip, then copy to the root of my sd, run clrcad (don't know what he meant by working sound- I heard nothing) then run haret....
Then I am always stuck at the green letters screen forever, never get further...
I'm not sure what is wrong
I looked through all possible things
I did HardSPL4 and now has HSPL2.08, I got a custom rom
The only thing I did not change and think might be the problem is the radio...
my version is 2.10.50.26
Would flashing an updated radio make my android on sd work?
Is this "Leo_RADIO_2.15.50.14**" ok for my HD2? (on http://forum.xda-developers.com/showthread.php?t=611787)
Thanks for the help nice to talk to everyone~
gameg2l said:
Hi, this is my first post here
I've been here for a long time (well didn't have a handset so didn't find the need to join...)
I read through many articles and learned a lot from this forum
Last weekend I got my T-Mobile HD2 and I proceeded to install custom rom soon after
(latest Energy rom by NRGZ28- thanks)
The rom is awesome, it's just that I wanna try out android on my phone also...
I decided I'll try the SD first
So I followed a guide just downloaded the rom I want (MCCM GB V2.0 Gingerbread HoneyComb Sense theme) unzip, then copy to the root of my sd, run clrcad (don't know what he meant by working sound- I heard nothing) then run haret....
Then I am always stuck at the green letters screen forever, never get further...
I'm not sure what is wrong
I looked through all possible things
I did HardSPL4 and now has HSPL2.08, I got a custom rom
The only thing I did not change and think might be the problem is the radio...
my version is 2.10.50.26
Would flashing an updated radio make my android on sd work?
Is this "Leo_RADIO_2.15.50.14**" ok for my HD2? (on http://forum.xda-developers.com/showthread.php?t=611787)
Thanks for the help nice to talk to everyone~
Click to expand...
Click to collapse
Ha I guess you did not like the first option, so I will edit the whole post.
Running Andriod from SD is very simple as long as you follow the instructions to the T. If the Andriod folder you copied to your SD card has another folder in it that you have to open to get to CLRCLAD and HARET then you need to copy that folder to the root of your SD card. It is also important the name of the folder is Andriod. The first time you boot the Andriod it can take up to ten minutes sometimes cause it has to creat folders, files, and pathways. So maybe you are not giving it enough time to boot all the way up beforeo you hit the reset button or do a battery pull. Your SD card also needs to be formated correctly you want to format it usimg Fat 32, please make a back up copy of your card also if you reformat it as it will wipe it clean. Last but not least you may just have a bad download. Try redownloading the build and recopy it to your SD card then run CLRCAD and HARET.
The only thing a radio will do is cure robot sounding voices during a phone call while running Andriod but most builds now have that solved and are compatible with the current radio 2.15.50.14. Also when you touch on CLRCAD you will see or hear nothing it enables the sound on the Andriod build.
Last but not least being you have a TMOUS (T-Mobile) HD2. Be adviced that you most flash a radio version that has a 50 in the third set of numbers like 2.xx.50.xx. Do not flash a radio that has a 51 in the third set of numbers like 2.xx.50.xx. or a radio that looks like this 2.04.50.xx or 2.05.50.xx as they will brick your TMOUS HD2 reindering it usless for nothing but a paper wieght. And the only way to unbrick a HD2 is with a JTAG and a ORT wich will cost you and you will have to take your HD2 apart to fix.
O_O is the issue that difficult?
I don't mind calling though
Thanks
gameg2l said:
O_O is the issue that difficult?
I don't mind calling though
Thanks
Click to expand...
Click to collapse
I sent you s PM, look at the top right hand corner of your screen and you should see you have a mwssage click on it.
Any luckwith getting it to boot yet?
Thanks!!! I downloaded the newest updated Rom and it worked lol I was too drawn into it so completely forlorn to post here (only pmed)
But beheld this is nice
Sent from my HTC HD2 Gingerbread using XDA App
gameg2l said:
Thanks!!! I downloaded the newest updated Rom and it worked lol I was too drawn into it so completely forlorn to post here (only pmed)
But beheld this is nice
Sent from my HTC HD2 Gingerbread using XDA App
Click to expand...
Click to collapse
I use a Gingerbread build too.
I have an HTC HD2. I'd like to run Android so I can use the Intuit credit card processing software....
I'm looking for simple, idiot-proof, acronym-free instructions on finding and installing a current, stable, functional Android...
I'm sure the folks that hang out here all the time know what all the acronyms are, but I'm a touch baffled... I figured out "sd" means the SD card in the phone. But, "NAND", "CWM" "MAGDLR", and some of the arcane terminology is confusing, and I don't know what I NEED to know and what I can safely ignore...
So, I can guess and pick some Android installation (it appears there are dozens of notes touting competing versions) but it would be simpler if someone in here can recommend something for a computer literate user that doesn't want to be a cell phone O/S expert...
Recommendations?
instructions:http://forum.xda-developers.com/showthread.php?t=893948
nand tools:http://forum.xda-developers.com/showthread.php?t=1090783
rom(cm7):http://forum.xda-developers.com/showthread.php?t=933951
rom(miui):http://forum.xda-developers.com/showthread.php?t=1028693
rom(sense):http://forum.xda-developers.com/showthread.php?t=954369
simple flashing order:make hspl 2.08 using hspl4-task 29-flash radio 2.15.....-flash mgldr-flash proper cwr partition for selected rom-if you use eu hd2 make sd-ext partition in sd(this can be done by mgldr)-put your rom.zip in sd-in mgldr choose ad recovery-install zip from sd-choose zip from sd-after installation complete press back then reboot.ask again if you stuck
Not to sound ungrateful 'cause I'm sure there's a lot of useful information in there somewhere, but this is exactly why I'm requesting something idiot-proof...
simple flashing order:make hspl 2.08 using hspl4-task 29-flash radio 2.15.....-flash mgldr-flash proper cwr partition for selected rom-if you use eu hd2 make sd-ext partition in sd(this can be done by mgldr)-put your rom.zip in sd-in mgldr choose ad recovery-install zip from sd-choose zip from sd-after installation complete press back then reboot.ask again if you stuck
Why am I flashing anything?
What is hspl 2.09 and why would I need it?
what on EARTH does "hspl4-task 29-flash radio 2.15" even MEAN?
why do I need a "proper cwr partition"?
and what rom am I selecting?
and on and on......
OK, so I presume the above is either a test or a bit of humor at the uninformed observer's expense (that'd be me)...
So, can I have all this translated from phone geek to dumb end user now?
Again, I presume I can just put Android on the SD card without a lot of pain and anguish, so still wondering what's a good, stable, fully-functional installation that'll run the GoPayment software and let me swipe credit cards through the phone...
my question, did you read the links? i mean really really read them? not just click and say "oh ****, that's a lot of text, i need help?" trust me....read them...then read them again...then read it again. it will start to make sense. your questions--
best read for a lot of your questions (besides what was posted above):
http://forum.xda-developers.com/showthread.php?t=1021837
Why am I flashing anything?
- you said you wanted android. technically you could use an sdcard rom, but he was just trying to give you what you asked for. guess the question should be why are YOU flashing anything?
you should ask - do i want windows mobile and android, only android (get rid of windows mobile all together) or windows phone (wp7) and android. only then can we point you in the right direction.
What is hspl 2.08 and why would I need it?
- read my thread above!!!!!! cuz you can't flash android without it (this is a custom bootloader that allows your windows mobile phone to install magldr or clk which allows you to install android to nand - aka install android to your phone)
what on EARTH does "hspl4-task 29-flash radio 2.15" even MEAN?
ignore the task 29 (i have never done this).
hspl4 will install hspl2.08 to your phone. this unlocks the bootloader. layman's terms - allows you to install magldr or clk to install android (or windows phone 7)
you need a particular radio to make this all work. that radio is 2.15. a radio is what allows your phone to make calls/data/etc. don't ask why this is, this is just the way it is. the radio your phone came with is likely different.
why do I need a "proper cwr partition"?
- cuz this allows you to install android. too small a partition, android won't fit. too large a partition, wasted space. just right partition = all good. you need to READ the rom thread to know what is the right partition.
and what rom am I selecting?
- you need to READ about the flavors of roms. there are a bunch. take one and try it. if it doesn't work, find another.
Again, I presume I can just put Android on the SD card without a lot of pain and anguish,
- yes, this is true
so still wondering what's a good, stable, fully-functional installation that'll run the GoPayment software and let me swipe credit cards through the phone
- beats me. but why not just try something? sdcard roms cannot in anyway hurt your phone.
now go read. and read. and read. and then experiment. good luck.
here is the best idiot proof way to get android on your phone. it is a winmo rom that has android already built in so you wont have to figure out what is what. its so easy even a cave man can do it.
Well, as usual, the secret to getting the right answer is asking the right question. And the trick to asking the right question is knowing most of the answer....
I didn't........
What I'd LIKE to do is have some current, fully functional version of Android available so I can process credit cards through my HD2 using a swiper. Over time, I may attempt to migrate other things to Android - like contacts and such. But initially, I'm just concerned about the CC processing.
So, as I understand what I want to do, putting Android on the SD card will work, and I just need to figure out which one of the umpteen versions is a good one. I'd like a home page that looks at least somewhat like my current Windows page. I"d like the buttons to continue to work as they currently do (as much as possible)....
I went out and started looking at the various SD Android versions here and selected the nexushd2-gingerbread v2.8 one because of a reply in a previous note asking for a "good" Android......
Installed it, and it works fine, although I"m not particularly fond of the home page. Put the GoPayment application on, plugged in the swiper, and ran a charge.... Appears to work fine, so it solves my primary problem...
Now, since I've figured out I'd prefer to use an SD installation, and have one that works, is there a "better" one that I should try? One that looks and feels more like the Windows Mobile 6.5 I'm used to? Or, is there one that has a different look and feel, but some functionality that makes it superior to the others?
This ROM I'm about to recommend dates back to last November...
However, I have tried every SD ROM since that time, used them for either a few hours/days/weeks, and still always returned to this one. It is just flawless, albeit Android 2.2.
Just download it, throw the 'Android' folder into the SD Card, and run the two files (CLRCAD.exe which appears to do nothing, but does enable the sound, and then Haret.exe)
http://forum.xda-developers.com/showthread.php?t=847631&highlight=black+blue
If you decide to move off WinMob, then NANDs are good, but personally I just have a WinMob program which runs on boot and then executes those two files)
Enjoy!
dkperez said:
Now, since I've figured out I'd prefer to use an SD installation, and have one that works, is there a "better" one that I should try? One that looks and feels more like the Windows Mobile 6.5 I'm used to? Or, is there one that has a different look and feel, but some functionality that makes it superior to the others?
Click to expand...
Click to collapse
do you like sense base builds or would you prefer 1 that doesn't have sense like cm7 or a miui ROM?
AmeriCanAndroid seems to be a favorite for a lot of people and is updated rather often but i personally like RafDroid HD found here. if you want to take a look at other android builds for the htc hd2 found here on xda check out this webpage. it will also give you some info about each ROM like the base, build, when it was updated & if it has sense or not. when you find one you want just click it & it will link you back to the page found on XDA.
Am I correct that "Sense" is the user interface used on the Windows Mobile HD2? If so, yes, I like it, but probably because I"m used to it. I'd have to try some different versions with different UIs to see what's most comfortable.
I'm currently running the nexushd2-gingerbread v2.8 one I downloaded yesterday. The UI is enough different that it's taking a little getting used to.
I'll have to give the others you mentioned a try, and go look at the web page that shows the different builds. I"m amazed at how many there are.
Just for fun I downloaded the AmeriCanAndroid 08/1/11 version and put it on the SD card..... Tried to run clrcad.exe and got the "CLRCAD annot be opened" error. Tried haret and got the same error. Both say "Either it is not signed with a trusted certificate, or one of its components cannot be found..."
So, am I missing something simple or is there a problem with this build? I found a couple topics in here about problems with clrcad but they seemed to wander aimlessly without any resolution...
I've now looked through a couple DOZEN topics over the last year with complaints of exactly the problem I'm seeing with clrcad and haret... I don't see a resolution in ANY of them......
Yesterday, copied the files onto the phone for the nexus gingerbread Android, ran clrcad and haret and was up and running.......
Now, I've tried three different builds, including reinstalling the nexus one, and NONE of them will run. I get the same error for clrcad and haret every time.
Shutting down the phone didn't do anything.
I figure there's got to be a simple, obvious answer sitting here but I'm not finding it.
sense for windows mobile & sense for android are two different things. i personally dont know of any android rom or app thats availible in the market that will give you a windows mobile look or feel. i would find a rom that you want and then try & find a video on youtube that matches it so you can see what its like before you go through all the steps to flash it.
did you unzip AmeriCanAndroid or did you leave it in a zip file? i have since moved to nand builds so im going from memory which is starting to fail me in my old age but i think it needs to be unzipped using something like 7-zip. i think you just put the android folder on the root of your sd card. there is a video in the thread that shows you how to do the install. you can find that here.
so you tried to re-install something that worked for you yesterday but now you cant install it again? how long did you wait because with some builds it can take as long as 10-15 mins to install everything correctly. could you give me the steps you took step by step to try to install AmeriCanAndroid? i think thats the only way i would be able to help.
Yesterday I downloaded the Android 7z file. Unzipped it on the PC and let it create an android folder with all the files. Plugged in the phone and copied the android folder to the root of the SD card on the phone. Ran clrcad and haret on the phone and IT WORKED PERFECTLY.........
Today, just to try one of the builds recommended in here I downloaded a different android. did EXACTLY the same thing - unzipped with a 7z unzip, copied it to an android folder in the root of the phone, ran clrcad and got the error. Ran haret and got the same error........
Cleaned off the android folder on the phone, rebooted, tried a soft reset, etc.
Copied the nexus android build from the PC to the phone - EXACTLY AS I DID YESTERDAY WHEN IT WORKED. Ran clrcad and got the error......
I don't know what's going on with the phone or the Android builds or what, but there are a LOT of entries here and elsewhere on the web about people having exactly this problem. And so far I haven't seen the answer that makes this problem go away......
My recollection is that I had EXACTLY the same problem about 6 months ago. Installed an earlier version of Android and after the first time I rebooted the phone I could never get Android to run again. Just got the same clrcad and haret errors...
So, SOMEBODY, what's causing this and how do I get rid of it WITHOUT having to do some hard reset the destroys everything on the phone?
Back up any data on you sd card you need (I.e. pics, vids, music, whatever you feel important.) Download the Panasonic sd formatter and format your sd card. Copy over the android folder that is in the 7zip that you have unzipped. You should be able to boot ok from there.
Sent from my AmeriCan NANDroid HD2 r727 magldr
Formatted from the PC.
Installed the formatter on the PC. Formatted the SD card. MAKES NO DIFFERENCE. Copied the Android folder (the identical folder I copied yesterday) to the SD card, and STILL get exactly the same error from clrcad.....
Is this something that happens a lot? 'Cause so far, the two times I've had Android on this phone this has happened. And there are a LOT of topics out there with exactly this problem, and a lot of unsuccessful "do this" that don't appear to work. Does ANYBODY had a real fix for this? It worked perfectly 24 hours ago, now it doesn't. My BIG concern is that if Android is flaky and unreliable on the SD card I can't use this thing to do credit card processing if it's going to randomly fail and not be bootable.
dkperez said:
Yesterday I downloaded the Android 7z file. Unzipped it on the PC and let it create an android folder with all the files. Plugged in the phone and copied the android folder to the root of the SD card on the phone. Ran clrcad and haret on the phone and IT WORKED PERFECTLY.........
Today, just to try one of the builds recommended in here I downloaded a different android. did EXACTLY the same thing - unzipped with a 7z unzip, copied it to an android folder in the root of the phone, ran clrcad and got the error. Ran haret and got the same error........
Cleaned off the android folder on the phone, rebooted, tried a soft reset, etc.
So, SOMEBODY, what's causing this and how do I get rid of it WITHOUT having to do some hard reset the destroys everything on the phone?
Click to expand...
Click to collapse
your suppose to copy the unzipped android folder to the root of your sd card and not your phone. i think thats why your getting an error.
example: download rom and unzip using 7-zip. take the "Android" folder not AmeriCanAndroid from within that file and drag_drop or copy_paste to the root of your sd card. then using a file manager from within winmo go to the android folder & run clrcad and then haret. it should run fine. you can also use a program called Rundroid that automats some of the work. its a great app that will allow you to dual boot android but i think you might find it useful as well, you can find it here. RunDroid will allow you to run several android builds from your sd, not just 1.
fwiw, I can't (won't) say anything bad about any custom ROM offered on this board. My own favorite (to use) is a personal choice, which doesn't make it superior to any other - though it may be. It's just what I'm used to, what works for me and what I'm satisfied with.
Doesn't matter if you use a stock HD2 WinMo setup, or a custom WinMo ROM on your HD2. An Android SD build won't interfere with it. And so... (personally) I use AmericanAndroid (ACA). It IS used by a majority of folks for good reason. - BUT - I'm trying my best to be careful and clear with YOU that it may not be the best solution for you or anyone else in particular. We don't play favorites on this site for good reason! For me though... it is an extremely easy ROM to implement.
So you're having a bit of trouble with clrcad & haret... No Problemo.
Google is your friend... find and install under WinMo the 'exceller bootloader'. You'll boot WinMo... and then run Exceller. It will shut down WinMo and run clrcad & haret.
Make sure you've properly installed ACA on your SD card first. No need to partition your SD card. Make sure you're clear with the instructions on the first page and be sure to edit the startup.txt file (before installation) to change the LCD pixel density from 167 (default) to 240... unless you have eagle eyes or like tiny icons & text.
This is your simplest solution, and... get to know it a bit before you swap it for something that might (possibly) not be better. There's a reason a majority of users have chosen to use this Android build.
I'd wish you good luck, but luck has nothing to do with these things. Have fun with it! -Rob
Yes, EVERYTHING was copied to the Android folder OF THE SD CARD......
I have no problem installing yet another piece of software to (hopefully) get the necessary clrcad and haret files to run, but THIS WORKED TWO DAYS AGO. Without a bootloader or anything else. It worked.....
And yes, Google is quite effective. It showed me dozens of topics in forums where people complained of EXACTLY the problem I'm having. What it DIDN'T show me was a fix that didn't involve reformatting the SD card, REPLACING the SD card, doing a hard reset on the phone, and (this one I haven't seen before) installing a boot loader to hopefully get around the issue... BTW: all the above with the exception of the boot loader were tried by people with no success.
FWIW: I"m not criticizing any of the Android builds in here. I'm sure they're largely excellent, with slightly different flavors. And they represent a huge amount of work, of which I'm cognizant and appreciative.
I presume the problem is with Windows Mobile, NOT the Android builds, but it would be comforting to have somebody provide a solution to why it works when installed, and doesn't work after a reboot. Did all those other people that had the same problem do what I did six months ago and just give up on Android as being more work than it was worth? This isn't an isolated problem, there are dozens (and probably hundreds) of instances of people not being able to get Android to boot.
Anyhow, I"ll go find an exceller bootloader and try that. Hopefully, the thing is controllable so if things still fail I can get back to Windows...
I spoke too soon....... It's early here (having started this again at 04:00), and maybe my brain just isn't working yet, or it could VERY possibly be that I'm just too stupid to be allowed to mess with this whole thing, but I eventually found a copy of EBL2.1a._PlusUbuntu.CAB and downloaded it to the PC.
Then I went and found instructions on installing a cab file on the HD2. According to them I just COPY the cab file from the folder on the pc to My Documents on the SD card of the phone, then disconnect the phone from the PC, navigate to the folder, and click on the cab file.......
OK, sounds simple enough....... Did so.
Got a popup on the phone that said it was "Installing ..." At the bottom I got "The program is from an unknown publisher... Do you want to continue?"
So, I clicked YES...... Again, fairly idiot-proof........
And got "Installation of EBL2.1a._PlusUbuntu.CAB was unsuccessful."
Nothing else.... Just the message on a blank screen...
I"ll leave out the amount of screaming and swearing I"m doing at this point.....
Hi, I am quite new to the HD2, so I have a question that might sound dumb to the more experienced people reading this.
Is it possible to Dualboot WP7 and Android ? But it is not that simple, I want my phone to boot into android unless I choose WP7 instead, I currently have Android ICS on my nand so what I need is something like the SD method used to dualboot WM6.5 and Android, but the other way around and with WP7 instead of WM6.5
Thanks.
Seems like even if I wanted to singleboot WP7, I cannot, because I cannot even get a rom, all the links are broken, If any on you have a WP7.8 with all the good stuff and tweeks I probably want, please link it.
Hi Traysa, you can only boot wp7 from nand using magldr. magldr lets you choose which OS autostarts in bootsettings. So you would need to partition your sdcard and use an SD android build, or better, a NativeSd ROM.
Shame the links are down, have you checked the last few pages of the threads for re-upped links? What wp7 takes your fancy? I might have it on HDD.
Off to sleep now, night night.
Oh, and you will need an activation code for wp7, don't think Microsoft give them out now as wp7 is unsupported.
Yes, I did look for reups for about an hour, found none, I would like a WP7 rom that has lots of preinstalled apps, because WP7 is no longer supported and getting them might not be very easy. dont really care if its Mango or WP7.8, I just want it to work. And about the WP7 activation key, how would I go about getting one ?
Thanks
edit: Forgot to add, I dont want to install wm6.5, i want to go straight from android to WP7, if at all possible.
The one you say you have ( WP7.8 pdaimatejam v8.8) should work, please mail it, or link it if you still have it.
Oh and pdaimatejam put this code out, it supposedly should work TP4CF-GK479-Q9Q4Q-WPYRP-7YR4D
heres another : CRFV7-X32H9-7QF2Y-CG239-V62YR
Off to work, will look later
After a **** ton of digging, I found a Hd2O ROM from a Dutch website, will try it.
No need for the rom anymore, the rom I found is working great, is it still possible to use the market ? When I try to make an account, it gives me a connection error, what do I do about that ? Also, I didn't use the key like you said, it never asked me to use a key.
Turns out I actually need a code, the two I found dont work. How do I get one ?
Okay, so WP7 is working perfectly, but I want Android too, how do I do that ?
I like either something cool like FroYo, I need an SD rom right ? Heres one,but the link is down ( https://forum.xda-developers.com/showthread.php?t=870518 ) I already have a few things on my wp7 installation, so I do NOT want to delete it all, so I will probably need to back it up, but 1. Will it work if I partition the SD card 2. will it even work with zune down ? If you have this rom, please post it
Traysa said:
Okay, so WP7 is working perfectly, but I want Android too, how do I do that ?
I like either something cool like FroYo, I need an SD rom right ? Heres one,but the link is down ( https://forum.xda-developers.com/showthread.php?t=870518 ) I already have a few things on my wp7 installation, so I do NOT want to delete it all, so I will probably need to back it up, but 1. Will it work if I partition the SD card 2. will it even work with zune down ? If you have this rom, please post it
Click to expand...
Click to collapse
Hi again Traysa, sorry been really busy in RL lately and haven't had a chance to get on xda. How are you getting on?
I posted a working link at the end of the thread you quoted for the Froyo build, but it would still be too big to install on sdcard without re-partitioning. I am pretty sure that you would lose your stuff if you repartitioned.
But see this post https://forum.xda-developers.com/showthread.php?p=41706158 for a way to boot android without repartitioning, it is also superRAM as the original froyo build, and works well as long as you have only a few apps.
Thank you, but I cannot get the ROM, because it was uploaded on DevHost, which I guess does not work any longer, if you still have the rom, would you put it on mediafire or send it as an attachment ? It is kinda sad, that so many HD2 ROMs got lost this way. I am also really surprised that you were able to get android on such a tiny amount of space.
Best regards
Traysa
Traysa said:
Thank you, but I cannot get the ROM, because it was uploaded on DevHost, which I guess does not work any longer, if you still have the rom, would you put it on mediafire or send it as an attachment ? It is kinda sad, that so many HD2 ROMs got lost this way. I am also really surprised that you were able to get android on such a tiny amount of space.
Best regards
Traysa
Click to expand...
Click to collapse
here you go
https://www.androidfilehost.com/?fid=818070582850507392
unzip it, put the cm7 folder in the fat16 partition using a card reader
download either the 48 or 64mb data image
https://www.androidfilehost.com/?fid=746010030569968509
https://www.androidfilehost.com/?fid=673956719939834348
unzip it and place the data.ext4 file next to the system.ext4 file in cm7 folder on your sdcard
follow the instructions in the above thread to boot from magldr
report back please and good luck
Hi, this build is soo close to booting, but when I go to Ad SD and launch it, Portadroid starts porting is and then it reboots, any ideas ?
I also have an unrelated question, I recently started experimenting with the CM13 build for the HD2, but I cannot figure out, how to get files onit, when I plug it in, it shows that its an MP3 Player and I cannot put any files on it, when I put the SD card in my PC directly,I quickly figure out that Windows is not Linux and does not understand EXT4. Because the browser/the play store does not work, I cannot put any apps on it, so that its usable, I wanna put a veeeery lightweight web browser on it and aptoide, it that works.
PS : Thank you for helping me, it always makes my day !
EDIT : I figured the file transfer out, I had to switch to PTP in settings instead of MTP.