Camera & Flash have suddenly stopped working - Droid X General

Posting this for my cousin; not *completely* familiar with the Droid X, but I'm probably better off trying to fix it than she, haha... I have a Samsung Captivate running Froyo (custom rom), so I'm hoping I can help figure it out with some input from you guys...
She recently updated to Froyo via OTA update from Verizon, and not too much longer after that, her camera and the flash stopped working. Also, the battery now drains very quickly (said she is now getting about 5 hours out of the battery as opposed to about double before.)
What could be the issue? Or which is the best remedy? Someone at Verizon told her to restore to factory default settings, but I'm wondering if flashing a new ROM completely may help? Or how would I go about going back to 2.1 then trying to update to 2.2 again?
Any help is greatly appreciated

If a factory reset didnt help I would try SBF'ing. Just make sure that if she is on the 2.2 OTA you use the 2.2 SBF. I'm pretty sure links arent allowed here but a quick search on Google would bring it up.

Related

sdx-developers now have ROMs based on 4/11/2011 VM USA Froyo release

The great developers and testers at sdx-developers came up with two version of Froyo using VM USA Froyo release.
1.
Rooted Froyo ROM for those who previously upgraded to Sprint Froyo 2.2
For Sprint baseband, DL05 or DF27
2.
Stock Froyo ROM based on latest VM USA
A few people tested this and reported that MMS and Voice Mail notifications working again.
http://forum.sdx-developers.com/int...obile-froyo-2-2-stock-system-and-kernel-dump/
Please read in detail and decide for yourself.
I'm still not sure about this update. It's not as simple as running Update.zip, right? You need to flash it, then do a factory reset, then download another program, run that, and THEN it works? Also, is this a modified ROM at all?
Yeah, this isn't the zipped rom from Virgin Mobile, this is pieced (back) together from the 2.2 update installed on an Intercept after the fact, apparently.
3:30pm PDT on 4/13 and still nothing.
I still haven't seen anybody come up with the actual 2.2 Froyo zipped rom from Virgin Mobile. Apparently everyone so far has popped a nut when they get the update and installed it directly instead of downloading it and choosing to install it later, then locating it on their phone and posting it somewhere.
I've got aLogcat installed. I am just waiting for the update to show up. I've seen the message that it is coming. Still waiting for it to arrive though. When it does I'll try to get the devs what they need. I don't really know what I am doing, but I'll give it a go.
I guess this no longer matters as the official update is now in the hands of SDX-Developers.
got mine on 4/20
holy sweet baby jesus this stuff is killing me! I've managed (by the grace) to get my bf's intercept rooted (not temp).. been on this for hours! I'm fairly accustomed to the process as I have an evo and been flashing nightlies for months.
I can't get a recovery on the phone via swupgrade. I put the cm01.tar in the binary folder by itself, and the thing goes through right to the last part and just sits there, doesn't transfer. heeeelp pleeeease! I'm so sick of this now. I was able to delete much of the bloat ware and now I'm wondering if it's worth the trouble to try and get a better rom / kernel. Advice?

atrix uk orange bootloop help

hey all got my atrix a week ago very happy with it managed to root it and thought i would take the plunge in flashing gingerblur 3.1 to it today
all seemed to go well untill reboot and now i seem to be stuck with a red flashing led and rebooting i did however make a backup of my stock rom if it helps
currently i cant do anything softbriced i think
any help on this would be great i am new to all this
uk atrix on orange network
well for any uk users who might come across the same issues i booted into fast boot recovery selected android recovery with volume buttons
which brought up an picture of droid and escelation mark tapped the bottom right hand corner to show on screen menu and selected factory restore and it fixed my bootloop issue.
now im sucsesfully running gingerbreak
i then used titanium backup restored my apps everything is good now
only issue is i cant change my deafult lock code and the finger print settings crash kinda stuck with a pin lock everytime it sleeps
nice one, good to know a orange atrix can use these roms, did you follow the exact same process or did you have to do anything different to the instructions provided?
also mine is stuck in a boot loot with the red led, but factory reset didnt fix it waiting for orange to get more stock for exchange
just followed the instuctions as posted from other users and read a few guides from here for days on end im wondering myself if there are any custom roms based on uk phone releases
No roms based for uk phones as yet as we run a diffrent software version than any of the other out,the only way it will work at a guess it to load a stock rom of a higher version from a at&t or bell one and then use a custom rom based for them, at the mo i am not going try it as we have no way to recover a full brick,you can always try and edit your own rom,this phone is nothing like the htc ones we all love to play with.
lonegunman said:
No roms based for uk phones as yet as we run a diffrent software version than any of the other out,the only way it will work at a guess it to load a stock rom of a higher version from a at&t or bell one and then use a custom rom based for them, at the mo i am not going try it as we have no way to recover a full brick,you can always try and edit your own rom,this phone is nothing like the htc ones we all love to play with.
Click to expand...
Click to collapse
just so ya know the 2.1.1 that has leaked works perfectly and you can flash greyblur over it however it breaks data so i would bother for now but yeah it seems pretty safe, both me and chuckyd have flashed successfully
Thats is good news, can you explian more about the data breaks?
lonegunman said:
Thats is good news, can you explian more about the data breaks?
Click to expand...
Click to collapse
its pretty weird, for me it seemed to work fine after i flashed, but then after rebooting later in the day, i couldnt get data to work regardless of what i did, it appeared to work with roaming enabled but i guess leaving that on isnt a great idea. hopefully its something small that ken could fix for us uk users as going from greyblur is a lot nicer overall, i found the honeycomb music player a bit slow though so ive installed playerpro
Have you got the right apn details? also have the radio rom changed?
Atrix in the UK
Hi Folks, I have had an Atrix for three months now and it works brilliantly in the UK with the following setup. Gingerblur 3.1 (based on android 2.2.2 with the system version 4.1.83.(latest avail) The only slight problem you might have is with the radio rom and thats easily fixed.(pm me for details) Also fully recoverable if required.
Ok, is it a new radio rom file?

Compass and Sensors - Hardware or Software problems?

A while back, just before the 2.2 OTA update came out for ATT locked streaks I received a replacement streak from dell. I didn't have it long enough before I applied the update to remember if the compass or sensors were working, but I seem to remember the screen would auto rotate just fine.
After the update the screen would not auto rotate at all. I spent a while looking into fixing it, trying things like srchild.com's calibrate-sensor-on-upside-down-dell-streak-after-froyo-22-android-upgrade
But I have a slightly different version of the menu's than that tutorial shows and nothing I did fixed the auto rotate so I eventually just learned to live with it in landscape mode for a while.
Now I realize that no compass or sensor based apps work. I've installed sensor monitor apps and they show no data. The "Calibration" application that shows bubble levels doesn't move at all. I'm starting to think it is a hardware problem but like I said, I am almost sure that screen rotation worked before the upgrade on this device.
Is there a way to verify for sure before calling dell. Their support was a nightmare to deal with the first time.
TIA
Why go through the trouble? Why not root your Streak and flash a custom ROM. They perform much better.
If you don't like them then you could always use the QDL tool to get back to stock but everyone here knows the OTA updates wreak havoc for almost all Android devices
cdzo72 said:
Why go through the trouble? Why not root your Streak and flash a custom ROM. They perform much better.
If you don't like them then you could always use the QDL tool to get back to stock but everyone here knows the OTA updates wreak havoc for almost all Android devices
Click to expand...
Click to collapse
A new ROM, stock or custom, won't fix the problem if there is a hardware issue. Installing a different ROM might help troubleshoot the problem. I would suggest a stock ROM so that if the problem persists there is no questions concerning the warranty. 353 is the latest AT&T ROM and can be downloaded here.
You don't have to root and then install StreakDroid, you can install SD without rooting first.
The updates I have gotten for the Streak have been excellent. I run Stock 351. My streak was purchased unlocked from Dell. In addition the OTA update I got for my Moto Backflip was a huge improvement and the update on my wife's Inspire that enabled the setting to install non-market apps works fine. I would have to say that not everyone here agrees with your assessment of the OTA updates.
To the opening poster I would suggest a reset or reinstall of 353 and then test with no apps installed.
I should've specified the OTAs from DELL are notorious for causing issues.
And you are correct, not everyone here would agree with them, but if you like to tweak and play, then a stock ROM doesn't offer much flexibility, not to mention performance wise.
When I first got my Streak I bricked it, then I revived it with the QDL tool and then went to StreakDroid. Then I even went back to stock to have a baseline to compare with the StreakDroid beta I'm currently using, and I have to say, stock is just that, stock, it's two worlds, performance and battery on stock just don't compare to any of the custom ROMs.
I know this isn't the place for this discussion but I couldn't help but make my point. If you like the stock ROM, I'm happy for you, but I for one have never been much to settle for less, I'm always looking for the latest thing.
Having not looked into updating android a great deal I'd appreciate any corrections if I'm mistaken on this, but I do believe the over the air update that was installed is the 353 version.
My Streak currently reads:
Baseband version: GAUSB1A135331-US
Build number 15697
marvin02 if you still think downloading and installing the the 353 ROM you linked to would help diagnose the issue I'd be more than happy to, please let me know.
cdzo72 I do plan on installing custom rom's and even getting into Android development in the near future but I do not have time for it yet. I would like to make sure I do not have a hardware problem before installing any custom rom's because it will be easier (less time consuming for me) to make a warranty claim if I need to. Unfortunately right now functional and limited is better than cutting edge and time consuming for me when it comes to my Streak.
data_loss said:
. . .
My Streak currently reads:
Baseband version: GAUSB1A135331-US
Build number 15697
marvin02 if you still think downloading and installing the the 353 ROM you linked to would help diagnose the issue I'd be more than happy to, please let me know.
. . .
Click to expand...
Click to collapse
A fresh install would eliminate (mostly) the possibility that your problem is caused by software, not hardware. If you still have the stock recovery on your phone you can just download the .pkg file, put it on your SD Card, rename it to update.pkg and boot into recovery to install.
I do still have the stock recovery.
I downloaded and installed the 353 ROM. It appears that the sensors are not working (no auto screen rotation). I also tried a factory reset after the update just for giggles, no change.
If I'm not mistaken the Streak_104_4399_21.pkg that can be downloaded from the streakdroid site is the official att&t 1.6 ROM. Would it be worth downloading and downgrading to that to test?
Or at this point do I just endure the call to dell support?
Is there any kind of documentation available for the fastboot menu on the streak? There seems to be options available for sensor stuff in there but I don't want to be just clicking through them without knowing what they do.
One hour on the phone ( which was not much fun ) and a couple days later and I have a replacement. It is a refurb, but in good condition and it works. Thanks all for the help.
Sent from my Dell Streak using XDA App

Rooted cwm and 4.010.2_com_gen1 now getting OTA 4.010.10 what to do

Ok
I have spent about an hour searching the threads and am still not sure what to do.
I am running a 32gig unit with build number 4.010.02_com_gen1
I originally rooted then installed cwm. I upgraded with a ROM of the 3.1 upgrade (how I got to 4.010.02..)
I am now getting prompted for an update to 4.010.10 that is 47.69meg
Based on what I am reading, I will either be FINE or the update will fail because I am rooted.
Can anyone tell me the correct process to get up to date. I dont have an issue with loading a custom STOCK rom if there is one one there that will get me to 4.010.10 or even 4.010.13 (?)
Also this is a US version (or at least if was before my custom upgrade to 3.1)
Will I be able to roll back to a cw backup if this goes bad? If that is doable, I am not worried about doing the update and seeing what happens. The tab world seems just a little less safe than the rooted EVO world...or is it just that the thought of a bricked tab scares me more
Thanks for the help

nTelos Milestone X 4.5.604 update

I've seen a lot of traffic since Monday about the nTelos Milestone X 4.5.604 update to GB. No one seems to have brought it up to here, but the update has bricked quite a few phones. My phone was bricked by a unsuccessful update, wasn't rooted, was stock. Boots in bootloader now.
Now the issue is, nTelos can't fix it, and their new policy is only to give refurbs as warranty. My phone is 2 weeks old, don't really want a refurb, and have a backup Milestone to use, in the meantime.
Anyone have anyway a way to get a hold of the sbf file? Any help would be appreciated.
It also looks as if the old sbf file (2.2.1) is an automatic brick also.
I think you need to call customer service and ream out a manager. Bottom line is the software update that "they and Motorola" pushed bricked your new, not refurb phone. It's not like you rooted it or installed a custom rom, or ran over it, or dropped it in the toilet. Their recommended software update bricked it. I would not stand for it.
Yay, I am no longer the only one here on nTelos!
Anyway, I recently OTA'd to the 4.5.604 update, and it went fine, even despite me being out of state. I was really surprised. But yeah, if you just got the phone, they should give you a replacement. They were more than willing when my MIN settings were messed up to send me a new phone, but they just took care of that over the phone.
I wish someone would release the .604 SBF for nTelos.
They didn't have any refurbs in stock (makes you wonder), so they replaced it with a new phone. Also, the employees haven't done the update....
I had a Samsung phone for 3 days with them, before the X. It's screen would lock up, so tech support told me to take it to the store. I did, and they replaced it with a refurb (without informing me). I got home, saw b-stock on the box. Additionally, it had the same issue (a model flaw apparently). They refused to do anything, so they got the phone back during the trial period.
That's how I got the X. I raised 4 kinds of hell. They gave me the X to shut me up.
success
I didnt have any issues here. I updated mine this morning.
My wife's identical phone also did not have a problem. So it's hit or miss.
nTelos 2
So far I havent been really impressed by the customer service and such. I too am with ntelos, I didnt know that I could find this many people!! Starting to learn with the milestone x what not to do. I would like to find a good guide and a rom that works with this phone. Still googling...
I have this phone with ntelos and I've used Miui and Liquid Gingerbread. I've also heard that gummyjar and liberty work as well but I've never tried them myself. miui is my fav thus far.
What process or guide did you use? I dont think that I have seen any out there. Also where did you get the ROM's? All that I have found havent been valid...Thanks in advance..
Well there used to be a forum for just ntelos android owners but it disappeared for whatever reason. I learned most of this stuff on that forum, so I'll try to help if I can.
You'd flash the rom just like you would if you were on any other carrier.
As for a guide, (and assuming you've already rooted your phone) addictivetips has a good one titled "How To Install A ROM Or App From Zip File To Android Device From Recovery" (Sorry the forums don't let me post links yet)
I've used this article a lot.
When looking at a rom I generally make sure it meets three requirements:
1. It's made specifically for the droid x or milestone x.
2. It doesn't flash a radio from another carrier. (I don't understand all the technical details so someone can correct me here. Almost all of the roms that I've found don't do this so you're safe. I just make sure in the description that it doesn't mention anything about flashing a radio.)
3. It is based off the Gingerbread kernel (since that's the version I'm running).
I'll try to post some links to some roms tomorrow. I've only tried a couple versions of miui and liquid Gingerbread. Let me know what else you need.
jdbell3 said:
Well there used to be a forum for just ntelos android owners but it disappeared for whatever reason. I learned most of this stuff on that forum, so I'll try to help if I can.
You'd flash the rom just like you would if you were on any other carrier.
As for a guide, (and assuming you've already rooted your phone) addictivetips has a good one titled "How To Install A ROM Or App From Zip File To Android Device From Recovery" (Sorry the forums don't let me post links yet)
I've used this article a lot.
When looking at a rom I generally make sure it meets three requirements:
1. It's made specifically for the droid x or milestone x.
2. It doesn't flash a radio from another carrier. (I don't understand all the technical details so someone can correct me here. Almost all of the roms that I've found don't do this so you're safe. I just make sure in the description that it doesn't mention anything about flashing a radio.)
3. It is based off the Gingerbread kernel (since that's the version I'm running).
I'll try to post some links to some roms tomorrow. I've only tried a couple versions of miui and liquid Gingerbread. Let me know what else you need.
Click to expand...
Click to collapse
i cant get my x to flash the recovery so i can install roms. any ideas?

Categories

Resources