I have a mytouch 3G. The Magic 32B and It is running stock android 2.2.1 but rooted. I have been trying to flash it with CM6(is there something better?) and It doesnt seem to work. Everytime I try to flash it I end up getting the boot loop where it just keeps booting up the "Mytouch 3G" image. Hopefully someone here can help because stock froyo is really slow on the mytouch 3G.
Are you wiping (factory reset) the phone before you flash the CM rom?
Changing ROMs requires a wipe, else you end up with the symptom you described. Settings and data won't match between custom ROMs and the phone won't know what to do.
Sent from my motofail CLIQ using XDA App
mcjerica said:
Are you wiping (factory reset) the phone before you flash the CM rom?
Changing ROMs requires a wipe, else you end up with the symptom you described. Settings and data won't match between custom ROMs and the phone won't know what to do.
Sent from my motofail CLIQ using XDA App
Click to expand...
Click to collapse
Yes, I wipe the data and the cache before I try to flash but I get to continuous boot loop problem
My guess is that you have a perfected SPL. Go into your bootloader (power + vol down). At the top if it reads "s - on" you won't be able to flash ROMs successfully. You will need an engineering hboot which will give you "s - off" status in your bootloader. If my suspicions are correct, you can do everything root gives you EXCEPT flash system ROMs. The bootloader's security is preventing it.
I held down vol down and power and got the following:
SAPPHIRE PVT 32B Ship S-ON G
HBOOT-1.33.0013 (SAPP30000)
CPLD-10
Radio-2.22.28.25
Oct 21 2009,22:33:27
I'm a bit new to the root/flashing rom so not sure what all that means.
I had the same problem with my wifes phone. I had to downgrade the radio to the ota radio update from cyanogens site. From what I read the spl needs to be updated in order to have the 2.2 radio. Hope this helps.
Sent from my T-Mobile myTouch 3G Slide using XDA App
sryan1983 said:
I had the same problem with my wifes phone. I had to downgrade the radio to the ota radio update from cyanogens site. From what I read the spl needs to be updated in order to have the 2.2 radio. Hope this helps.
Sent from my T-Mobile myTouch 3G Slide using XDA App
Click to expand...
Click to collapse
I located the ota radio update from cyanogens site but not sure what SPL is.. Can someone help me out with that and how I update it
poeticsoul44 said:
I located the ota radio update from cyanogens site but not sure what SPL is.. Can someone help me out with that and how I update it
Click to expand...
Click to collapse
Honestly, if you're that new to hacking android, i wouldn't mess around with flashing radios and SPL. You're bound to brick your phone. Do some research. Search a lot and read. Basically, your specs show that you are on a perfected SPL and therefore won't be flashing ROMs. You will need to flash an engineering SPL and downgrade your radio to flash most Tom's.
Damn.. That sucks.. Like I said the stock version of froyo is really slow and seems to freeze up a lot on my phone. Thought a different rom would help it..
Related
Okay, I have a Mytouch 1.2 and I understand this process, but I have no idea which SPL to flash, can anybody with a Mytouch 1.2/LE help?
Splash and bootscreen
I think for all my touch that's the same, you simply need an eng engineering spl (so you can remote fastboot and flash from your pc).
To safely flash an engineering spl there's a pretty good thread started by lbcoder in the g1 forum, you should chheck it.
Then there's 2 things, the link you posted from unlocker is a method to change the splash screen (the one with your carrier logo).
To create a proper splash screen image use the enclosed soft.
or this http://www.koushikdutta.com/2008/12/quick-and-dirty-converter-tool-to.html
Then if you want to change the bootscreen (the second one, usually android) you need to change:
* the mask and shine pics in
/system/framework/framework-res.apk/assets/images
if your rom is donut based
*or simply change the gif animation in
/system/media/bootanimation.zip
if your rom is eclair based.
engenering spl
What I remember about the post I mentioned.
Basically to safely flash an engineering spl you need to flash the one matching your stock one (e.g. 1.33.2005 for 1.33.0005) and then if you wanna change to a different engineering spl (not matching your radio ... ...) you must flash it via fastboot otherwise good chance to brick.
Anyhow, you should make sure to well check all of it first
Okay, I tried the Engineering 2010 SPL, but then my phone had no audio for music or phone calls, is there another SPL I should try?
Hey after a quick look here, I think there's still no engeenering spl matching yours.So you should maybe go back to regular one.
Did you try to flash the splash screen even before changing the spl. Your stock spl might allow it.
sipvn said:
Hey after a quick look here, I think there's still no engeenering spl matching yours.So you should maybe go back to regular one.
Did you try to flash the splash screen even before changing the spl. Your stock spl might allow it.
Click to expand...
Click to collapse
No, my stock SPL doesn't let me. Anybody else with a Mytouch 1.2/Fender manage to change the splash?
C0dy said:
No, my stock SPL doesn't let me. Anybody else with a Mytouch 1.2/Fender manage to change the splash?
Click to expand...
Click to collapse
NOOOOO dont go messing with spl/ radios. You will brick. Right now, we dont know what does what with what. I know it sux, I lost the fender splash screem that I will probably never get back. But doing this is still not safe yet.
Just give it a bit of time till we can get whats safe and whats not straightened out. To many people have bricked these phones since release not knowing how new of a piece of hardware it actually is.
Its your phone, do what you want... but its not worth the risks
Hey after a quick look here, I think there's still no engeenering spl matching yours.So you should maybe go back to regular one.
Did you try to flash
Click to expand...
Click to collapse
No, my stock SPL doesn't let me. Anybody else with a Mytouch 1.2/Fender manage to change the splash?
Click to expand...
Click to collapse
I've changed mine several times. flash it while rooting your phone. flash radio, hboot, recovery and then splash1
crypysmoker said:
NOOOOO dont go messing with spl/ radios. You will brick. Right now, we dont know what does what with what. I know it sux, I lost the fender splash screem that I will probably never get back. But doing this is still not safe yet.
Just give it a bit of time till we can get whats safe and whats not straightened out. To many people have bricked these phones since release not knowing how new of a piece of hardware it actually is.
Its your phone, do what you want... but its not worth the risks
Click to expand...
Click to collapse
Yeah, the no audio thing freaked me out, so I'm staying away from messing around with SPL for now.
I just changed the boot image,so now mytouch 3g 3.5mm is back to the previous mytouch3g boot image.
This is my device:
SAPPHIRE PVT 32A SHIP S-ON G
HBOOT-1.33.0013 (SAPP31000)
CPLD13
RADIO-2.22.23.02
Oct 21 2009,22:33:27
Recovery-RA-sapphire-v1.5.2G,it might sound crazy,but it works like a charm.
And this is what I tried and what I got.
First I did the SPL downgrade to Engineering 2010 SPL,as stated no audio for music or phone calls.So after this update my sapphire became a PVT 32B with 2010 SPL.
This is what I did to get the sound back and the 1.33.0013 SPL.
Code:
fastboot flash hboot hboot_7201A_1.33.0013G_091021.nb0
fastboot flash recovery recovery-RA-sapphire-v1.5.2G.img
I uploaded the hboot_7201A_1.33.0013G_091021.nb0
After this I rebooted,the boot image remained there and the audio problems were gone,besides this the device is back to:
SAPPHIRE PVT 32A SHIP S-ON G
HBOOT-1.33.0013 (SAPP31000)
So now I have all the goodies from before,the mytouch boot image and the Android blue letters.I did neither have to use my nandroid backup nor update the radio.
I hope the explanation is not really complicated,but english is not my 1st language.
If you have questions just ask.
u know I thought about this before I even rooted... so since I have a 1.2 when I was re flashing. the stock radio, stock spl and amen ras recovery.. I also flashed the mytouch original splash screen... I think this should be mention to new people rooting this device so that they don't run in to the issue later riskin bricking their phone trying to get it back
Sent from my T-Mobile myTouch 3G using the XDA mobile application powered by Tapatalk
SO basically i flash the engineering 2010 SPL change my splash screen then hboot that .nbo file to get my original SPl back?
dude i know how to do this just flash the spl then change the image to something you like then go back to the original i did it and it worked
where did you get the original images?
Go to thrunlockr.com and find there how to guide they have a link to the original splash screen
where did you get the original images?
Click to expand...
Click to collapse
Sent from my HTC Magic using the XDA mobile application powered by Tapatalk
C0dy said:
No, my stock SPL doesn't let me. Anybody else with a Mytouch 1.2/Fender manage to change the splash?
Click to expand...
Click to collapse
Came across this and started reading but didnt get to last page so sorry if its an old post and im bringing it back from the dead... I noticed someone said something about bricking the phone so im either lucky or it doesnt brick the phone... Short background on what i did...
I had a g1, digitizer started doing what it wants and not what my finger did so i bought a used mytouch. great except i had cyanogen froyo 2.2 on my g1 so i miss it lol i did everything through theUnlockr.com made the gold card, installed the sdk crap, got the rom the instructions said to use first which was the cyanogen 2.1 rom... well when i did all this i lost the original Mytouch start up it now said HTC Magic or Dream cant remember i just know it said HTC then something and it was black screen... No no... so i again found on the Unlockr site how to change the splash screen "http://theunlockr.com/2010/03/10/how-to-change-your-splash-screen/" Mind you the Engineering spl sais 2010 i had 2013 on my phone so i bascily downgraded i guess? once i did that i lost audio through the earpeace.... but i got the mytouch splash screen again... so i then reflashed the spl back to the one i used when rooting the phone but the mytouch splash screen stayed... Sooo not sure if this helps in anyway but just sharing what happend to me in hopes it answers your question .....
here is the deal, we don't run an eng SPL. So we don't have the ability to flash from fastboot. I do agree with ceas909, flashing the splash (or any custom splash) should be stated in the rooting guide.
After that, you need to do redo the rooting process with a goldcard to get the ENG SPL temp on the phone to flash custom splash, then flash back to stock SPL.
Let me explain to you the whole story. I obviously know im going to get flamed for this one. I will give you the short short version
I had a rooted MT3G fender with this Rom installed
http:/forum.xda-developers.com/showthread.php?t=669911
It worked all good until i started messing with stuff. I wanted this rom installed
http:/forum.xda-developers.com/showthread.php?t=673394
Since it said 32a and MT3G fender is 32a i assumed that it will install and no problems. So i used the gold card to change radio and spl to the 3.22 series. only to find out that they dont work for my phone. based on this post
"You are now screwed with a downgraded SPL and radio that do not work on this phone YAAAAAAY." -crypysmoker-
[THUNK AND FIXED] Rooting Mytouch Fender LE 32a/ Mytouch 1.2 DONT!!
http:/forum.xda-developers.com/showthread.php?t=622530
So now im thinking great i didnt catch that so let me just move back to where i was before. using the last section of that previous thread to install the stock radio and spl. i have done this already and know it works. so i install the stock radio and spl and the custom recovery. Boot up into recovery and restore nandroid. everything is going ok utill.....it locks up in a boot loop. i then boot back up into recovery and erase data. after that i tryed another nandroid restore and to my wonderful surprise i now lost the ability to mount the sdcard. i restarted and tryed many different cards and all failed. I then boot up into hboot restore with the goldcard and it then locks up at system.
Great now im looking for something to fix this whole mess. after that i try to reinstall the original spl and radio. I then have an error "signature verify failed." Now im thinking WTF!!!!!
I then find a thread about the RUU and how to turn off "S-on" if i install this official HTC app. However come to find out its the asia version. WONDERFUL FOR ME!!! I then found the Official T-mobile MT3G RUU, installed it and now i have a fastboot installed with a memchip with a red circle around it, not the 3 skate droids, and cant boot into HBOOT ,with the volume down button. All that i see is "RUU USB." I have adb but now get the error "remote not allowed." it used to be "signature verify failed." i have no recovery, no HBOOT, just fast boot with RUU USB.
How to i fix this mess up and get back to this?
T-Mobile MyTouch 3g Fender Edition Stock ROM with ROOT!
http:/forum.xda-developers.com/showthread.php?p=5451898&posted=1#post5451898
This is what i have and show
Sapphire pvt 32a ship s-on G
Hboot-1.33.0013 (sapp31000)
cpld-13
radio-2.22.23.02
oct 21 2009,22:33:27
RUU USB
This is definitely a snowball effect right here.
Oh also i cant go and exchange the MT3g fender because im past my 14 days and i already did it on the first day. LOL
I actually am stuck on the same screen with the same phone. I hope someone has been able to get this fixed
Damn, not trying to be mean, but you screwed up a lot.
I have the same version device as you, and I upgraded my radio/SPL. and did a lot of stuff, i semi-bricked it, but i got it working again. I suggest you re-root your whole entire phone. including flashing all the radios, spl,recovery, and etc.
Try following this theunlockr[DOT]com/2010/03/11/how-to-root-the-mytouch-1-2-and-fender-mytouch/
The problem is that the phone is stuck in a bit of an interesting state. You can't flash from an RUU at this point because the engineering SPL used to root the phone is version 2.53.x, while the RUU's ROM is 2.10.x. You also cannot flash any images to the phone because the SPL is locked (S-ON). So the only way to fix the phone at this point would be to somehow get an HTC-signed 2.53+ ROM for the SAPP31000 (mytouch 3g 1.2/fender) or find a way to unlock the SPL. I had a nice chat with some of the Modaco guys and we went through a lot of options with none of them working. The phone's basically in a bit of a chicken vs. egg state. So personally, I will be building a serial cable to manually unlock the SPL so that I can flash images back on manually.
So, while I wish it was as easy as just re-flashing the phone, you can't do that with a locked SPL and no HBOOT mode available. Onward to a serial/TTL cable advendure!
Once I get the parts in to build it, I'll follow up here with my results
shintokun said:
I suggest you re-root your whole entire phone. including flashing all the radios, spl,recovery, and etc.
Click to expand...
Click to collapse
hi guys, i have a Fender Mytouch - which was running roms nicely till i booted back into recovery then selected restart/reboot and it went straight to the HBOOT screen - i press back to go to fastboot but nothing happens, i tried all key combos to get into recovery or fastboot but nothing. Completly stuck on this HBOOT screen :-(
PVT 32A SHIP S-ON G
HBOOT - 1.33.0013
CPLD-13
RADIO - 2.22.23.02
Oct 21 2009
please ive tried to look other posts but they all can get into fastboot i cant, can someone help i didnt flash any spl or anything but 32a/32b roms over the last month - oh and it was running recovery-RA-sapphire-v1.6.2G before this happened
Is there a way to flash a recovery image from the HBOOT screen ? I really dont know what the fook happened - grrrr crazy
please can one of the smart guys on here give me assistance - been trying to look for the solotuion for 3 hours now
zerodi said:
Is there a way to flash a recovery image from the HBOOT screen ? I really dont know what the fook happened - grrrr crazy
Click to expand...
Click to collapse
Yes, if you have an engineering SPL, which you do not. You'll need to flash a stock ROM.
do not flash an eng spl. Our phones do not run on anything other then stock radio and spl. Also, even though it is a 32a board, only g1 /32b roms and recoveries work.
What happened to you makes no sense unless your leaving something out or tried to flash an ota Rom.
Take battery out, put it back in /hold home and power, should go into recovery. If not, I would say follow my guide in Sig to start over but you'll probably screw up on flashing the radio and spl.
you flashed a wrong radio, man
"PVT 32A SHIP S-ON G
HBOOT - 1.33.0013
CPLD-13
RADIO - 2.22.23.02"
2.22.23.02 is the radio for google branded, my touch 3g = PVT 32B .... not your 32A
turop said:
you flashed a wrong radio, man
"PVT 32A SHIP S-ON G
HBOOT - 1.33.0013
CPLD-13
RADIO - 2.22.23.02"
2.22.23.02 is the radio for google branded, my touch 3g = PVT 32B .... not your 32A
Click to expand...
Click to collapse
lol Oops Didnt catch that. HEs right, you have the G1 radio going. Ours should be .12 at the end... I think lol. I havent had to mess with it for a while since Universal Androot works now. But again, you may want to start over if you know what your doing. Otherwise, time to go get a replacement because flashing the radio and spl, your probably going to brick it anyway.
crypysmoker said:
do not flash an eng spl. Our phones do not run on anything other then stock radio and spl. Also, even though it is a 32a board, only g1 /32b roms and recoveries work.
What happened to you makes no sense unless your leaving something out or tried to flash an ota Rom.
Take battery out, put it back in /hold home and power, should go into recovery. If not, I would say follow my guide in Sig to start over but you'll probably screw up on flashing the radio and spl.
Click to expand...
Click to collapse
Thanks encouraging as your words are i didnt do anything / screw anything up all i did was reboot into recovery from the sparks rom then reboot/restart and it gave me this problem !!!
turop said:
you flashed a wrong radio, man
"PVT 32A SHIP S-ON G
HBOOT - 1.33.0013
CPLD-13
RADIO - 2.22.23.02"
2.22.23.02 is the radio for google branded, my touch 3g = PVT 32B .... not your 32A
Click to expand...
Click to collapse
Umm..what?
Your radio/SPL are fine. As for your situation, did you root using the goldcard method? If you did, try doing it over and see if it'll let you into fastboot after loading the engineering sappimg.
Sent using Tapatalk.
hey guys , i got into recovery now and wiped everything then flashed a rom but its stuck on the rom boot screen now, cannot boot into the rom
I just flashed [MT3G 1.2/LE Fender] CR_Slide2G1_v1 and it works ! My LE is back up and running
i really dont know why that happened stuck on the Hboot screen
zerodi said:
I just flashed [MT3G 1.2/LE Fender] CR_Slide2G1_v1 and it works ! My LE is back up and running
i really dont know why that happened stuck on the Hboot screen
Click to expand...
Click to collapse
Some roms take 10-15 min to boot up so you just gota have patience .
Also, any roms built with a Cyan kernel after 5.0.8 will work on our phones also.
IS the location working on that rom for you?
When it first cam eout I used it for months with no problems.. but then I tried to go back a few days ago and the weather/clock will not find me.
yeah with wifi it picks up my location for the weather just fine
zerodi said:
yeah with wifi it picks up my location for the weather just fine
Click to expand...
Click to collapse
only on wifi? thats weird. That would explain why it keeps asking for wifi to be on though lol.
You wont belive it but this f***in ohone has just gone and done the same problem again.....
I was charging it then powered off the device then turned it on after 30mins and its now stuck on the HBOOT screen AGAIN - grrrrrr i cant belive this thing
So now im completey stuck again - if this happens everything i charge this thing then thats not gonna be cool.
Im trying this method here http://forum.xda-developers.com/showthread.php?t=734617 , posted by DonJuan692006
but because the phone cant boot up into the OS adb doesnt see it as list of devices so i cant do the goldcard and start again.....
hmmmm i might throw this thing outta the window
Without a goldcard your not going to be able to go that route. If you've still got your Hero, you can use it to make the goldcard, or any Android powered device for that matter. Maybe just wait it out and see if it just starts working as before?
i have a successful goldcard.img from my Hero will take be ok to use for the Fender you thinks ?
damm-it just tried that and SAPPIMG gives an Incorrect Model ID - because im using the Hero goldcard
damm i dont know what else to try
does anyone have a Fender Goldcard img they would like to share with me - proberly wont work but you never know i might get lucky
cheers
Hey,
I have a mytouch 4g and I had it perm rooted as well as s-off. I recently attempted to unroot my phone and made a mistake of attempting to do this while having the wrong radio. Now I am unable to flash any new kernals or radios to my phone. My wi-fi doesn't even work with the radio I currently have flashed. My phone reads this in boot
GLACIER PVT SHIP S-ON
HBOOT-0.86.0000
MICROP-0429
RADIO-26.08.04.30_M3
eMMC-boot
Sept 27 2010, 11:12:59
is there any way for me to fix this problem and get my S back on??
Any help is greatly appreciated.
I am currently running CyanogenMod 7.0.3
Re-root your phone, then flash the new radio, an stuff you need. Get s off also
Sent from an android,thats makes steve jobs jelous.
Thanks
Mr.Highway said:
Re-root your phone, then flash the new radio, an stuff you need. Get s off also
Sent from an android,thats makes steve jobs jelous.
Click to expand...
Click to collapse
My phone is actually still rooted from when I used to have it rooted, if I flash the radio I need to use to make s-off work, will it work? i thought the entire purpose of s-on was to prevent me from being able to flash any radio?
http://forum.xda-developers.com/showthread.php?t=858996, follow that guide, its the saner one I used
Sent from an android,thats makes steve jobs jelous.
The best option for you would be to flash the PD15IMG from the hBoot. It will flash the radio you should have along with turning the s-on as long as you didn't use ./gfree to root the phone.
neidlinger said:
The best option for you would be to flash the PD15IMG from the hBoot. It will flash the radio you should have along with turning the s-on as long as you didn't use ./gfree to root the phone.
Click to expand...
Click to collapse
in order to flash the radio from the h-boot, wouldn't i need to have s-off? Right now i have S-On so I am unable to flash radios
Terryshanks45 said:
in order to flash the radio from the h-boot, wouldn't i need to have s-off? Right now i have S-On so I am unable to flash radios
Click to expand...
Click to collapse
The PD15IMG is the entire stock T-Mobile ROM. You do not need to be rooted or have s-off to flash that.
you are thinking of the radio files. You do not want to flash that.
hear read this
http://theunlockr.com/2010/12/16/how-to-unroot-the-t-mobile-mytouch-4g/
Hey,
I just tried that method with the stock PD15IMG.zip file and I got the message
Main Version is older!
Update Fail!
Press <POWER> to reboot
do you have any idea what could cause this to happen??
Would I brick my phone if i performed the factory reset from the HBOOT menu?
Terryshanks45 said:
Hey,
I just tried that method with the stock PD15IMG.zip file and I got the message
Main Version is older!
Update Fail!
Press <POWER> to reboot
do you have any idea what could cause this to happen??
Would I brick my phone if i performed the factory reset from the HBOOT menu?
Click to expand...
Click to collapse
if your s-off all a factory reset will do is wipe everything on your phone.
neidlinger said:
if your s-off all a factory reset will do is wipe everything on your phone.
Click to expand...
Click to collapse
so theres no point in me performing the factory reset...do you have any other suggestions as to what I could to to fix my phone?? I realize the problem lies with me having the wrong radio but I can't figure out how to get s-off in order to flash the stock radio and the stock rom gives me an error when I attempt to flash it...
Terryshanks45 said:
so theres no point in me performing the factory reset...do you have any other suggestions as to what I could to to fix my phone?? I realize the problem lies with me having the wrong radio but I can't figure out how to get s-off in order to flash the stock radio and the stock rom gives me an error when I attempt to flash it...
Click to expand...
Click to collapse
IIRC you can flash radio files via fastboot but i do not know the commands to do it.
neidlinger said:
IIRC you can flash radio files via fastboot but i do not know the commands to do it.
Click to expand...
Click to collapse
Thanks, I am logging into the IRC chat to see if someone there can help. I appreciate your help, do you know if there may be a guide on how to flash radios via fastboot on any website? i havent been able to locate one
So I was "flashing" a new ROM via ClockworkMod Recovery v2.5.07 earlier on my phone, and the battery was near dead, so I decide to plug it in. I didn't bother to think/realize it was plugged into the USB port on my computer, and as I did so, the installation stopped and the phone turned off. I turned it back on, to find the "MyTouch 3G" green splash screen either stuck and the phone eventually turns off, or it loops, and the phone keeps rebooting. I've tried flashing flashing the ROM again and some different ROMS I believe, with no luck. Yes I can get to the recovery screen and I can get to hboot/fastboot. Any direct troubleshooting would be very much appreciated. I don't really care what ROM I have on my phone at the moment, I just need something that works. My old blackberry is missing several keys and the rest barely work, so it would be nice having this one back up and running I've searched other threads and other forums with no luck so far. PS I don't have a Nandroid backup...thought I did, guess not though.
SAPPHIRE PVT 32B ENG S-OFF H
HBOOT-1.33.2010 (SAPP30000)
CPLD-10
RADIO-2.22.28.25
Thanks,
Shane
Flash recovery AmonRa 1.7.0G first
Code:
fastboot flash recovery recovery.img
Then search 1.33.0013 or 1.33.0013d and flash it via
Code:
fastboot flash hboot hboot.img
You will have
SAPPHIRE PVT 32B SHIP S-ON G
HBOOT-1.33.0013 (SAPP30000)
and able to install new 32B roms (for radio 2.22.28.25) via recovery...
p.s. Don't flash anything when battery at 30% or less
Most roms require the new radio and spl that came with the froyo update. You have the radio, but you need the 1.33.0013 or 1.33.0013d spl.
tvall said:
Most roms require the new radio and spl that came with the froyo update. You have the radio, but you need the 1.33.0013 or 1.33.0013d spl.
Click to expand...
Click to collapse
Thx for comment, i updated mine...
So a problem, I accidentally flashed the recovery-RA-sapphire-v1.7.0G-cyan.img, then flashed the spl, and now of course I don't have the ability for fastboot...problem?
Shano56 said:
So a problem, I accidentally flashed the recovery-RA-sapphire-v1.7.0G-cyan.img, then flashed the spl, and now of course I don't have the ability for fastboot...problem?
Click to expand...
Click to collapse
Do you have ability to load recovery?
p.s. fastboot commands are locked in hboot 1.33.0013 (1.33.0013d)
yeah I know they were blocked, but I figured out how to access via adb
so I got the proper recovery image on...and flashed CM6, however it's still looping on the MT3G splash screen
Edit: Weird - I tried the 5.0.8-DS and it worked. I appreciate your help..any clue why 6 don't work?
Shano56 said:
yeah I know they were blocked, but I figured out how to access via adb
so I got the proper recovery image on...and flashed CM6, however it's still looping on the MT3G splash screen
Edit: Weird - I tried the 5.0.8-DS and it worked. I appreciate your help..any clue why 6 don't work?
Click to expand...
Click to collapse
May be need special kernel for radio 2.22.28.25? What requirements for CM6?
Not sure, but it says I'm running 6.1 now. And I downgraded my radio to 2.22.23.02.
Shano56 said:
yeah I know they were blocked, but I figured out how to access via adb
so I got the proper recovery image on...and flashed CM6, however it's still looping on the MT3G splash screen
Edit: Weird - I tried the 5.0.8-DS and it worked. I appreciate your help..any clue why 6 don't work?
Click to expand...
Click to collapse
Ezterry released a different cm6 for people that had problems with the first one, I think it was a kernel issue
Sent from my HTC Magic using XDA App