Okay, I have a Mytouch 1.2 and I understand this process, but I have no idea which SPL to flash, can anybody with a Mytouch 1.2/LE help?
Splash and bootscreen
I think for all my touch that's the same, you simply need an eng engineering spl (so you can remote fastboot and flash from your pc).
To safely flash an engineering spl there's a pretty good thread started by lbcoder in the g1 forum, you should chheck it.
Then there's 2 things, the link you posted from unlocker is a method to change the splash screen (the one with your carrier logo).
To create a proper splash screen image use the enclosed soft.
or this http://www.koushikdutta.com/2008/12/quick-and-dirty-converter-tool-to.html
Then if you want to change the bootscreen (the second one, usually android) you need to change:
* the mask and shine pics in
/system/framework/framework-res.apk/assets/images
if your rom is donut based
*or simply change the gif animation in
/system/media/bootanimation.zip
if your rom is eclair based.
engenering spl
What I remember about the post I mentioned.
Basically to safely flash an engineering spl you need to flash the one matching your stock one (e.g. 1.33.2005 for 1.33.0005) and then if you wanna change to a different engineering spl (not matching your radio ... ...) you must flash it via fastboot otherwise good chance to brick.
Anyhow, you should make sure to well check all of it first
Okay, I tried the Engineering 2010 SPL, but then my phone had no audio for music or phone calls, is there another SPL I should try?
Hey after a quick look here, I think there's still no engeenering spl matching yours.So you should maybe go back to regular one.
Did you try to flash the splash screen even before changing the spl. Your stock spl might allow it.
sipvn said:
Hey after a quick look here, I think there's still no engeenering spl matching yours.So you should maybe go back to regular one.
Did you try to flash the splash screen even before changing the spl. Your stock spl might allow it.
Click to expand...
Click to collapse
No, my stock SPL doesn't let me. Anybody else with a Mytouch 1.2/Fender manage to change the splash?
C0dy said:
No, my stock SPL doesn't let me. Anybody else with a Mytouch 1.2/Fender manage to change the splash?
Click to expand...
Click to collapse
NOOOOO dont go messing with spl/ radios. You will brick. Right now, we dont know what does what with what. I know it sux, I lost the fender splash screem that I will probably never get back. But doing this is still not safe yet.
Just give it a bit of time till we can get whats safe and whats not straightened out. To many people have bricked these phones since release not knowing how new of a piece of hardware it actually is.
Its your phone, do what you want... but its not worth the risks
Hey after a quick look here, I think there's still no engeenering spl matching yours.So you should maybe go back to regular one.
Did you try to flash
Click to expand...
Click to collapse
No, my stock SPL doesn't let me. Anybody else with a Mytouch 1.2/Fender manage to change the splash?
Click to expand...
Click to collapse
I've changed mine several times. flash it while rooting your phone. flash radio, hboot, recovery and then splash1
crypysmoker said:
NOOOOO dont go messing with spl/ radios. You will brick. Right now, we dont know what does what with what. I know it sux, I lost the fender splash screem that I will probably never get back. But doing this is still not safe yet.
Just give it a bit of time till we can get whats safe and whats not straightened out. To many people have bricked these phones since release not knowing how new of a piece of hardware it actually is.
Its your phone, do what you want... but its not worth the risks
Click to expand...
Click to collapse
Yeah, the no audio thing freaked me out, so I'm staying away from messing around with SPL for now.
I just changed the boot image,so now mytouch 3g 3.5mm is back to the previous mytouch3g boot image.
This is my device:
SAPPHIRE PVT 32A SHIP S-ON G
HBOOT-1.33.0013 (SAPP31000)
CPLD13
RADIO-2.22.23.02
Oct 21 2009,22:33:27
Recovery-RA-sapphire-v1.5.2G,it might sound crazy,but it works like a charm.
And this is what I tried and what I got.
First I did the SPL downgrade to Engineering 2010 SPL,as stated no audio for music or phone calls.So after this update my sapphire became a PVT 32B with 2010 SPL.
This is what I did to get the sound back and the 1.33.0013 SPL.
Code:
fastboot flash hboot hboot_7201A_1.33.0013G_091021.nb0
fastboot flash recovery recovery-RA-sapphire-v1.5.2G.img
I uploaded the hboot_7201A_1.33.0013G_091021.nb0
After this I rebooted,the boot image remained there and the audio problems were gone,besides this the device is back to:
SAPPHIRE PVT 32A SHIP S-ON G
HBOOT-1.33.0013 (SAPP31000)
So now I have all the goodies from before,the mytouch boot image and the Android blue letters.I did neither have to use my nandroid backup nor update the radio.
I hope the explanation is not really complicated,but english is not my 1st language.
If you have questions just ask.
u know I thought about this before I even rooted... so since I have a 1.2 when I was re flashing. the stock radio, stock spl and amen ras recovery.. I also flashed the mytouch original splash screen... I think this should be mention to new people rooting this device so that they don't run in to the issue later riskin bricking their phone trying to get it back
Sent from my T-Mobile myTouch 3G using the XDA mobile application powered by Tapatalk
SO basically i flash the engineering 2010 SPL change my splash screen then hboot that .nbo file to get my original SPl back?
dude i know how to do this just flash the spl then change the image to something you like then go back to the original i did it and it worked
where did you get the original images?
Go to thrunlockr.com and find there how to guide they have a link to the original splash screen
where did you get the original images?
Click to expand...
Click to collapse
Sent from my HTC Magic using the XDA mobile application powered by Tapatalk
C0dy said:
No, my stock SPL doesn't let me. Anybody else with a Mytouch 1.2/Fender manage to change the splash?
Click to expand...
Click to collapse
Came across this and started reading but didnt get to last page so sorry if its an old post and im bringing it back from the dead... I noticed someone said something about bricking the phone so im either lucky or it doesnt brick the phone... Short background on what i did...
I had a g1, digitizer started doing what it wants and not what my finger did so i bought a used mytouch. great except i had cyanogen froyo 2.2 on my g1 so i miss it lol i did everything through theUnlockr.com made the gold card, installed the sdk crap, got the rom the instructions said to use first which was the cyanogen 2.1 rom... well when i did all this i lost the original Mytouch start up it now said HTC Magic or Dream cant remember i just know it said HTC then something and it was black screen... No no... so i again found on the Unlockr site how to change the splash screen "http://theunlockr.com/2010/03/10/how-to-change-your-splash-screen/" Mind you the Engineering spl sais 2010 i had 2013 on my phone so i bascily downgraded i guess? once i did that i lost audio through the earpeace.... but i got the mytouch splash screen again... so i then reflashed the spl back to the one i used when rooting the phone but the mytouch splash screen stayed... Sooo not sure if this helps in anyway but just sharing what happend to me in hopes it answers your question .....
here is the deal, we don't run an eng SPL. So we don't have the ability to flash from fastboot. I do agree with ceas909, flashing the splash (or any custom splash) should be stated in the rooting guide.
After that, you need to do redo the rooting process with a goldcard to get the ENG SPL temp on the phone to flash custom splash, then flash back to stock SPL.
Related
LOL I have this:
SAPPHIRE PVT 32B SHIP S-ON G
HBOOT-1.33.0006 (SAPP30000)
CPLD-10
Radio-2.22.19.261
May 27 2009, 19:06:41
Click to expand...
Click to collapse
I think it's a perfected SPL but who knows.. Satan?
I want to update my lame ass SPL to one of these bad boys:
Haykuro's "Death" SPL
OR
Magic SPL HBOOT Collection
From these Awesome Website and Also Awesome, I've narrowed down the steps to Victory!
Here's what my Brain thinks:
1.) Download an SPL (i.e Haykuro's "Death" SPL).
2.) Transfer to SD Card.
3.) Go into Recovery Mode (Amon_Ra-v1.5.2G)
4.) Scroll down to "Flash zip from sdcard".
5.) Flash Haykuro's "Death" SPL.
6.) Reboot system now and wait for it to enter Recovery Mode again.
8.) Check for new SPL, and you're done?
My Q's:
1.) Are my steps horribly wrong and could possibly brick my phone?
2.) No wiping required?
3.) If it gets stuck on Formatting CACHE for a long long long time..what to do?
your rooted
SAPPHIRE PVT 32B SHIP S-ON G
so i doubt you can get to recovery
sitimber said:
your rooted
SAPPHIRE PVT 32B SHIP S-ON G
so i doubt you can get to recovery
Click to expand...
Click to collapse
Yes, I know I'm rooted. I just want to update my spl to the latest. And I can definitely get to recovery mode, was just flashing a couple of roms earlier.
Give me some help, bro!
i am also confused. I have a mytouch 3g with a "perfect" (1.33.0006)SPL... what does that mean? what cant I do with this SPL that I can do with a danger SPL? I already have CM Recovery 1.4 + latest Cyanogen Mod rom...
Man, if you don't know what an SPL is, then you're "so 2000 and late." Haha sorry, I had to man
k but instead of sounding smart cause you know something us people who are late dont... how bout explaining?
kareeem said:
Man, if you don't know what an SPL is, then you're "so 2000 and late." Haha sorry, I had to man
Click to expand...
Click to collapse
Hahahaha and that beat goes zoooom zoooom zooom
kareeem stop making jokes help us out, LOL
What's your current SPL, and how did you install it?
melterx12 said:
k but instead of sounding smart cause you know something us people who are late dont... how bout explaining?
Click to expand...
Click to collapse
I only said that line because it was the only one i could find that fit with the lyrics I don't even have an Android device so there's your answer.
this is so frustrating ive googled this for almost an hour and I still cant find anything that explains exactly what a non perfect SPL does and how to go about flashing it and which one to flash!
melterx12 said:
this is so frustrating ive googled this for almost an hour and I still cant find anything that explains exactly what a non perfect SPL does and how to go about flashing it and which one to flash!
Click to expand...
Click to collapse
Haha yeah same here bro.
Hope someone can enlighten us about how they upgraded their spl.
All I know is that its short for "splash image" and has something to do with the boot up process. My dad is a programer (during a coversation about android and linux) explained the SPL to me during Fourth of July but I was a little too drunk to care and pay attention.
well actually SPL stands for Second Program Loader. That much i know for sure. I also know that its the equivalent of a bootloader. what i DONT know and neither does anyone else by the looks of it (lol), is what the difference is between a perfect SPL and a Danger SPL, and how to go about flashing a danger SPL for mytouch 3g? and which danger SPL is the best?
BoomBoomPOW said:
LOL I have this:
I think it's a perfected SPL but who knows.. Satan?
I want to update my lame ass SPL to one of these bad boys:
Haykuro's "Death" SPL
OR
Magic SPL HBOOT Collection
From these Awesome Website and Also Awesome, I've narrowed down the steps to Victory!
Here's what my Brain thinks:
1.) Download an SPL (i.e Haykuro's "Death" SPL).
2.) Transfer to SD Card.
3.) Go into Recovery Mode (Amon_Ra-v1.5.2G)
4.) Scroll down to "Flash zip from sdcard".
5.) Flash Haykuro's "Death" SPL.
6.) Reboot system now and wait for it to enter Recovery Mode again.
8.) Check for new SPL, and you're done?
My Q's:
1.) Are my steps horribly wrong and could possibly brick my phone?
2.) No wiping required?
3.) If it gets stuck on Formatting CACHE for a long long long time..what to do?
Click to expand...
Click to collapse
Some people can be d!cks in this forum. Your steps are right from all that I know. Changing your SPL is an at your own risk sort of venture, though. Haven't even had the balls to do it myself yet. But, first, do try to use the search function in these forums. Pretty new myself but have good luck finding the resources I need through search. Lastly, here are a couple of links that have helped my in regard to SPL research. The first is more general and worth reading through the comments. The second one specifically relates to you...
http://forum.xda-developers.com/showthread.php?t=548218
http://forum.xda-developers.com/showthread.php?t=570659&highlight=hboot
Good Luck. Hope it helps.
melterx12 said:
this is so frustrating ive googled this for almost an hour and I still cant find anything that explains exactly what a non perfect SPL does
Click to expand...
Click to collapse
your google-fu is weak old man!!
http://wiki.xda-developers.com/index.php?pagename=HTC_Sapphire_Hacking#sec01
"Perfect" SPL Revisions (that prevent us hacking)
Currently HBOOT-1.33.0006 and HBOOT-1.33.0010 are the known 'Perfect SPL' revisions on the Sapphire handsets that we know of.
It is not possible to fastboot a ROM using these and you need to wait until someone has hacked it.
Edit (12 Aug 2009) : Now you can! Refer to How-To - Fix that perfected SPL - Root the T-Mobile myTouch 3G
So what is an SPL anyway? What does it do?
The SPL, or Second Program Loader, is essentially the Android bootloader. It's job is more than just loading the Android OS - it also offers several other boot options, including Recovery mode, Fastboot, and HBOOT modes, and ultimately it's the SPL that allows manipulation of the flash nand on your device. Part of the SPL's job is to ensure that the data flashed to the device is correct. Most of the current shipping SPLs (apart from the "Perfect SPL's) let us flash a complete ROM image, but don't let us flash a recovery rom or boot image as it checks the verification signature. Haykuro has modified the SPL's available to remove this check and this is what the Engineering SPL's available offer. As the SPL is so crucial to the handset though, you have to be very careful when flashing it as if it's updated incorrectly then you may be incapable of restoring it without specialised hardware and knowledge. You essentially have a very expensive brick
Click to expand...
Click to collapse
looktall said:
your google-fu is weak old man!!
Click to expand...
Click to collapse
Off topic, but thanks for posting. I wish more people were this patience and helpful. Kudos. Especially on the comedy inoffensive flame.
ive already seen that article, but it still does not explain what i want to know. I already know what an SPL does, but what does a Danger SPL do that my perfect SPL cant. is it worth flashing my SPL? which one should i flash and how? I cant find answers to these questions.
ok ive just foudn a bit of info saying that a danger SPL allows you to flash hero ROMS onto your mytouch.. but WTF??? Ive already flashed 2 different Hero ROMS onto my mytouch with no problems and I have a Perfect SPL. the only reason i didnt keep em was cause the device was slow! So wtf is going on with my phone? what am I missing here rofl
The "Danger" (or "Death") SPL is Haykuro's 1.33.2005 and there is only one. It changed the nand partitions sizes (or sth like that) on the G1 and that was why it is required to run Hero ROMs on it. It's not required to run Hero ROMs on the Magic though. What you're talking about are "Engineering" SPLs and the main difference with stock SPL is that, AFAIK, they bypass security checks to allow the flashing of unsigned update packages. Also, I think only Engineering and non-perfected SPLs allow the use of the fastboot protocol, the possibility to flash recovery images directly and the use of Nandroid to make backups.
To me it's all about unlocking everything but I could have lived with my stock non-perfected SPL as I could already do everything I wanted.
Signature checking is not necessary a bad thing. Perfected SPL is a different story as it really reduces you possibilities but I know there are workarounds.
swissp said:
The "Danger" (or "Death") SPL is Haykuro's 1.33.2005 and there is only one. It changed the nand partitions sizes (or sth like that) on the G1 and that was why it is required to run Hero ROMs on it. It's not required to run Hero ROMs on the Magic though. What you're talking about are "Engineering" SPLs and the main difference with stock SPL is that, AFAIK, they bypass security checks to allow the flashing of unsigned update packages. Also, I think only Engineering and non-perfected SPLs allow the use of the fastboot protocol, the possibility to flash recovery images directly and the use of Nandroid to make backups.
To me it's all about unlocking everything but I could have lived with my stock non-perfected SPL as I could already do everything I wanted.
Signature checking is not necessary a bad thing. Perfected SPL is a different story as it really reduces you possibilities but I know there are workarounds.
Click to expand...
Click to collapse
Very informative. I was able to perform a Nandroid backup successfully while still on the "perfected SPL" so what's up with that? I guest I'll just stick with my perfected stock SPL for now, until I find a really great rom I want to flash but requires a non-perfected/eng spl.
BoomBoomPOW said:
Very informative. I was able to perform a Nandroid backup successfully while still on the "perfected SPL" so what's up with that? I guest I'll just stick with my perfected stock SPL for now, until I find a really great rom I want to flash but requires a non-perfected/eng spl.
Click to expand...
Click to collapse
That's why I said "I think"... fortunately I've never had a perfected SPL and I can only repeat what others have been saying about it. Can you restore the backup too?
As you'd already noticed, information on the subject is quite vague but you are right anyway, the only reason to change SPL should be if the ROM you want to install requires it ;-)
Let me explain to you the whole story. I obviously know im going to get flamed for this one. I will give you the short short version
I had a rooted MT3G fender with this Rom installed
http:/forum.xda-developers.com/showthread.php?t=669911
It worked all good until i started messing with stuff. I wanted this rom installed
http:/forum.xda-developers.com/showthread.php?t=673394
Since it said 32a and MT3G fender is 32a i assumed that it will install and no problems. So i used the gold card to change radio and spl to the 3.22 series. only to find out that they dont work for my phone. based on this post
"You are now screwed with a downgraded SPL and radio that do not work on this phone YAAAAAAY." -crypysmoker-
[THUNK AND FIXED] Rooting Mytouch Fender LE 32a/ Mytouch 1.2 DONT!!
http:/forum.xda-developers.com/showthread.php?t=622530
So now im thinking great i didnt catch that so let me just move back to where i was before. using the last section of that previous thread to install the stock radio and spl. i have done this already and know it works. so i install the stock radio and spl and the custom recovery. Boot up into recovery and restore nandroid. everything is going ok utill.....it locks up in a boot loop. i then boot back up into recovery and erase data. after that i tryed another nandroid restore and to my wonderful surprise i now lost the ability to mount the sdcard. i restarted and tryed many different cards and all failed. I then boot up into hboot restore with the goldcard and it then locks up at system.
Great now im looking for something to fix this whole mess. after that i try to reinstall the original spl and radio. I then have an error "signature verify failed." Now im thinking WTF!!!!!
I then find a thread about the RUU and how to turn off "S-on" if i install this official HTC app. However come to find out its the asia version. WONDERFUL FOR ME!!! I then found the Official T-mobile MT3G RUU, installed it and now i have a fastboot installed with a memchip with a red circle around it, not the 3 skate droids, and cant boot into HBOOT ,with the volume down button. All that i see is "RUU USB." I have adb but now get the error "remote not allowed." it used to be "signature verify failed." i have no recovery, no HBOOT, just fast boot with RUU USB.
How to i fix this mess up and get back to this?
T-Mobile MyTouch 3g Fender Edition Stock ROM with ROOT!
http:/forum.xda-developers.com/showthread.php?p=5451898&posted=1#post5451898
This is what i have and show
Sapphire pvt 32a ship s-on G
Hboot-1.33.0013 (sapp31000)
cpld-13
radio-2.22.23.02
oct 21 2009,22:33:27
RUU USB
This is definitely a snowball effect right here.
Oh also i cant go and exchange the MT3g fender because im past my 14 days and i already did it on the first day. LOL
I actually am stuck on the same screen with the same phone. I hope someone has been able to get this fixed
Damn, not trying to be mean, but you screwed up a lot.
I have the same version device as you, and I upgraded my radio/SPL. and did a lot of stuff, i semi-bricked it, but i got it working again. I suggest you re-root your whole entire phone. including flashing all the radios, spl,recovery, and etc.
Try following this theunlockr[DOT]com/2010/03/11/how-to-root-the-mytouch-1-2-and-fender-mytouch/
The problem is that the phone is stuck in a bit of an interesting state. You can't flash from an RUU at this point because the engineering SPL used to root the phone is version 2.53.x, while the RUU's ROM is 2.10.x. You also cannot flash any images to the phone because the SPL is locked (S-ON). So the only way to fix the phone at this point would be to somehow get an HTC-signed 2.53+ ROM for the SAPP31000 (mytouch 3g 1.2/fender) or find a way to unlock the SPL. I had a nice chat with some of the Modaco guys and we went through a lot of options with none of them working. The phone's basically in a bit of a chicken vs. egg state. So personally, I will be building a serial cable to manually unlock the SPL so that I can flash images back on manually.
So, while I wish it was as easy as just re-flashing the phone, you can't do that with a locked SPL and no HBOOT mode available. Onward to a serial/TTL cable advendure!
Once I get the parts in to build it, I'll follow up here with my results
shintokun said:
I suggest you re-root your whole entire phone. including flashing all the radios, spl,recovery, and etc.
Click to expand...
Click to collapse
hi guys, i have a Fender Mytouch - which was running roms nicely till i booted back into recovery then selected restart/reboot and it went straight to the HBOOT screen - i press back to go to fastboot but nothing happens, i tried all key combos to get into recovery or fastboot but nothing. Completly stuck on this HBOOT screen :-(
PVT 32A SHIP S-ON G
HBOOT - 1.33.0013
CPLD-13
RADIO - 2.22.23.02
Oct 21 2009
please ive tried to look other posts but they all can get into fastboot i cant, can someone help i didnt flash any spl or anything but 32a/32b roms over the last month - oh and it was running recovery-RA-sapphire-v1.6.2G before this happened
Is there a way to flash a recovery image from the HBOOT screen ? I really dont know what the fook happened - grrrr crazy
please can one of the smart guys on here give me assistance - been trying to look for the solotuion for 3 hours now
zerodi said:
Is there a way to flash a recovery image from the HBOOT screen ? I really dont know what the fook happened - grrrr crazy
Click to expand...
Click to collapse
Yes, if you have an engineering SPL, which you do not. You'll need to flash a stock ROM.
do not flash an eng spl. Our phones do not run on anything other then stock radio and spl. Also, even though it is a 32a board, only g1 /32b roms and recoveries work.
What happened to you makes no sense unless your leaving something out or tried to flash an ota Rom.
Take battery out, put it back in /hold home and power, should go into recovery. If not, I would say follow my guide in Sig to start over but you'll probably screw up on flashing the radio and spl.
you flashed a wrong radio, man
"PVT 32A SHIP S-ON G
HBOOT - 1.33.0013
CPLD-13
RADIO - 2.22.23.02"
2.22.23.02 is the radio for google branded, my touch 3g = PVT 32B .... not your 32A
turop said:
you flashed a wrong radio, man
"PVT 32A SHIP S-ON G
HBOOT - 1.33.0013
CPLD-13
RADIO - 2.22.23.02"
2.22.23.02 is the radio for google branded, my touch 3g = PVT 32B .... not your 32A
Click to expand...
Click to collapse
lol Oops Didnt catch that. HEs right, you have the G1 radio going. Ours should be .12 at the end... I think lol. I havent had to mess with it for a while since Universal Androot works now. But again, you may want to start over if you know what your doing. Otherwise, time to go get a replacement because flashing the radio and spl, your probably going to brick it anyway.
crypysmoker said:
do not flash an eng spl. Our phones do not run on anything other then stock radio and spl. Also, even though it is a 32a board, only g1 /32b roms and recoveries work.
What happened to you makes no sense unless your leaving something out or tried to flash an ota Rom.
Take battery out, put it back in /hold home and power, should go into recovery. If not, I would say follow my guide in Sig to start over but you'll probably screw up on flashing the radio and spl.
Click to expand...
Click to collapse
Thanks encouraging as your words are i didnt do anything / screw anything up all i did was reboot into recovery from the sparks rom then reboot/restart and it gave me this problem !!!
turop said:
you flashed a wrong radio, man
"PVT 32A SHIP S-ON G
HBOOT - 1.33.0013
CPLD-13
RADIO - 2.22.23.02"
2.22.23.02 is the radio for google branded, my touch 3g = PVT 32B .... not your 32A
Click to expand...
Click to collapse
Umm..what?
Your radio/SPL are fine. As for your situation, did you root using the goldcard method? If you did, try doing it over and see if it'll let you into fastboot after loading the engineering sappimg.
Sent using Tapatalk.
hey guys , i got into recovery now and wiped everything then flashed a rom but its stuck on the rom boot screen now, cannot boot into the rom
I just flashed [MT3G 1.2/LE Fender] CR_Slide2G1_v1 and it works ! My LE is back up and running
i really dont know why that happened stuck on the Hboot screen
zerodi said:
I just flashed [MT3G 1.2/LE Fender] CR_Slide2G1_v1 and it works ! My LE is back up and running
i really dont know why that happened stuck on the Hboot screen
Click to expand...
Click to collapse
Some roms take 10-15 min to boot up so you just gota have patience .
Also, any roms built with a Cyan kernel after 5.0.8 will work on our phones also.
IS the location working on that rom for you?
When it first cam eout I used it for months with no problems.. but then I tried to go back a few days ago and the weather/clock will not find me.
yeah with wifi it picks up my location for the weather just fine
zerodi said:
yeah with wifi it picks up my location for the weather just fine
Click to expand...
Click to collapse
only on wifi? thats weird. That would explain why it keeps asking for wifi to be on though lol.
You wont belive it but this f***in ohone has just gone and done the same problem again.....
I was charging it then powered off the device then turned it on after 30mins and its now stuck on the HBOOT screen AGAIN - grrrrrr i cant belive this thing
So now im completey stuck again - if this happens everything i charge this thing then thats not gonna be cool.
Im trying this method here http://forum.xda-developers.com/showthread.php?t=734617 , posted by DonJuan692006
but because the phone cant boot up into the OS adb doesnt see it as list of devices so i cant do the goldcard and start again.....
hmmmm i might throw this thing outta the window
Without a goldcard your not going to be able to go that route. If you've still got your Hero, you can use it to make the goldcard, or any Android powered device for that matter. Maybe just wait it out and see if it just starts working as before?
i have a successful goldcard.img from my Hero will take be ok to use for the Fender you thinks ?
damm-it just tried that and SAPPIMG gives an Incorrect Model ID - because im using the Hero goldcard
damm i dont know what else to try
does anyone have a Fender Goldcard img they would like to share with me - proberly wont work but you never know i might get lucky
cheers
Hi,
I am not all that new to rooting / flashing i've had a lot of experience but i think i've made a school boy error.
I rooted a HTC Magic last night and added the 1.5 Hero Rom.
this morning i looked for a later ROM and i found one from the unlockr.
the issue with this was that it required a radio flash. My 32B Magic is now flashed to 32A and i cannot even get into recovery mode OR re-flash the radio.img i had originally through fastboot.
Upon boot the Magic just comes up with the Mytouch 3G spash screen and nothing else.
Details:
Rooted using gold card method, fine.
Hero rom installed: fine.
Updating the ROM however, the radio was flashed to 32A and now i cannot get back into recovery mode.
Is there anything i can do? has anyone seen this before? I really don't want to keep using the motorola dext, sorting this magic out will make me happy.
Please help.
thanks.
you cant go in fastboot mode???
[edit]No, I can get to fastboot, i can get the opening my touch splash up but nothing is working from there. i've tried the arab rom but i can't get my pc to recognize. there has to be a way to flash this back...
[edit] update - Attempted to flash stock 32B Radio to get rid of the 32A that i think's causing the issue - fastboot flash radio.img... Sends radio OK but hangs on Writing radio, I get a black screen on the device. didn't work.
I don't want to ruin the mood any more than it is now, but I did practically the same thing; flashed 32B radio onto 32A Magic, and it was unrepairable in my country. Sold it for parts a few weeks later and got another one.
No fastboot, no boot at all, nothing. All that I was able to get was the blue led mode (trackball + power), and the only repair method was JTAG, which wasn't available to me.
That sucks.
From what I can gather this very well might be dead but everything I can find tells me as long as i can get into fastboot there must be something i can do.
At the moment I can use fastboot and HBOOT but i'm unable to get to a recovery or flash a stock radio.
so far i've tried every recovery/radio i can get my hands on. Hope i'm missing something and somebody is able to help.
flashing 32B to 32A does make me feel a bit spastic to be honest. it's a mistake I can never repeat with anything!
http://forum.xda-developers.com/showthread.php?t=754565
Try posting your thread again in the correct section.
EDIT: Tis the season and junk. I was about to move this to the TRASH but I took pity on you. I moved your thread to the correct section but the next new post that you create in the Development section that isn't related to development will be trashed. Final warning.
Appreciated, My bad. It's been a long and overly tiring day.
Info if it helps:
Sapphire PVT 32A SHIP S-ON H
HBOOT-1.33.0009 (SAPP10000)
RADIO-6.35.16.19
Tried flashing official rom, nothing.
I got ID Failed, same when i try usinb sappimg in hboot.
radio now half installs but failes on ID.
Felt i'd add to this in case anyone has any ideas.
cheers.
Hi,
I recommend that you download this switcher (http://forum.xda-developers.com/showthread.php?t=794450&highlight=eyegor). Only to use the files (HBOOT, RADIO and REVOVERY), again ONLY because of the files.
After download reboot on fastboot mode and flash: HBOOT, RADIO and RECOVERY, using this sequence.
Good luck,
I'm not sure if this will deal with 32B Magic that's been flashed to 32A but i'll give it a shot. thanks.
Unfortunately there was no luck with that or the Arabic RRU, The GUI Switcher method to flash the radio failed, now phone won't even turn on.
If it wasn't a brick before, it sure as hell is now. i'll chalk this one up as a mistake i think and just be more careful in future.
So my wife just upgraded her phone and i was left with a stock MyTouch 3g with 3.5mm headphone jack and I thought I would expand my Android knowledge base and see what I could do with it. I am not knew to Android and I have a Samsung Vibrant that I can pretty much do whatever I want with. The Galaxy line is extremely easy compared to this device.
So I did my fair share or reading and research and was able to root the phone with Universal Androot and installed busybox via titanium backup. I downloaded ROM manager from the market and flashed clockwork recovery. I used recovery to installl CM 5.0.8 DS and once it reboots in wont load past the mytouch splash.
This is what I started with:
SAPPHIRE PVT 32A SHIP S-ON G
HBOOT-1.33.0013
CPLD-13
RADIO-2.22.23.02
Oct 21 2009, 22:33:27
And this is what it reads now:
SAPPHIRE UNKNOWN 32B ENG S-OFF H
HBOOT-1.33.2010 (SAPP31000)
CPLD-13
RADIO-2.22.23.02
Jun 2 2009, 17:27:03
I read that Binary said that it is really a 32B not an A so to stick with the B ROMs. I can also access fastboot and recovery.
The easy part with the Vibrant is that if I screw up the phone you can just simply Odin back to stock and start over, but the mytouch is a little more complex than that. So basically I want to get back to stock and start over. There are so many threads and links that say user friendly but I didn't find it quite user friendly. I must just be spoiled with the Galaxy.
Any help would be greatly appreciated. It's not a rush or it's not my daily driver. Just a toy phone now to learn on.
Thanks!
mod edit because of inaccurate information.
So you are saying if I just follow the normal root guide for the fender 1.2 that I should be good?
Sent from my GT-I9000 using XDA App
CBATESY said:
usually any of the 3.5mm jack phones are 32a devices. 32b is the original mt3g. ones with the jack in the top is a mt3g 1.2 or 32a. If you have recovery working you can use that to restore back to factory or installed sapping.img
here something to help you out .
http://wiki.cyanogenmod.com/index.php?title=HTC_Magic
Click to expand...
Click to collapse
NO! Damn it! Listen to me everybody! The 1.2 device (Fender, etc) are a 32A/32B hybrid. The ONLY thing that makes this phone ANY different than the regular 23B MyTouch devices is the additional ram. That's it! You CANNOT fit a 32A ROM on the device because it lacks the internal storage. Even if you COULD the kernel for that rom would require a 32A radio. You cannot use a 32A radio because the 1.33.0013 32A s-ON spl requires the 32B radio. And it requires a 32B radio else it will brick. The 1.33.0013 is the S-ON stock SPL that the phone requires to use the memory map. If you try the Engineering SPL (1.33.2010 32B S-ON) the phone might boot, but you will not have touch screen or the use of the headphone jack because of the different drivers and memory map. When you flash the Engineering SPL it will read 32B because that is what is needed to flash the custom recovery and roms. However your device will not work properly because it's a 32A/32B hybrid. You need the 32A stock firmware (1.33.0013 S-ON) for the phone to operate. You also need the appropriate 32B radio and rom as well.
I have the phone and I've had it since it's release. I started off by making custom roms for it and ports before roms were using VoxLuna's driver patch. Trust me when I say that I know a little about this damn phone!
You know what... to hell with it. Do whatever you want. Don't be sending me private messages begging for help when you brick your device because you think it's a 32A.
custom ported rom #1
custom ported rom #2
custom ported rom #3
custom rom #1
They all require 1.33.0013 S-ON with 32B radio.
offdutyninja808 said:
SAPPHIRE UNKNOWN 32B ENG S-OFF H
HBOOT-1.33.2010 (SAPP31000)
Click to expand...
Click to collapse
The problem. You forgot to mention that you also flashed a non-perfected SPL at some point before flashing CM 5.0.8. You need to get that fixed. Luckily you can fix it without a goldcard since you've already got S-OFF.
Download these:
hboot.nb0 for myTouch 1.2 only
Amon Ra 1.7.0-G Recovery
Go to this URL and follow the steps to get ADB setup if you don't already have it. Then go here and follow steps 7, 8, and 9. In step 7, you should only need to run:
fastboot flash hboot hboot.nb0 (the 0 at the end of this line is a zero not an oh).
fastboot flash recovery recovery.img
fastboot reboot-bootloader
After that just reflash CM 5.0.8, although I'm using CM 6.1 and it's just as good, but with the perks of Android 2.2. I would suggest reading through that thread I linked to get more familiarity.
Lastly, I will warn you that this isn't the easiest way to get your phone fixed, but this is the way that I learned about my phone, so it should help you out in that aspect. I'm sure mumilover or someone else may come along with a simpler solution.
If you have any problems, let us know here.
Binary100100 said:
NO! Damn it! Listen to me everybody! The 1.2 device (Fender, etc) are a 32A/32B hybrid. The ONLY thing that makes this phone ANY different than the regular 23B MyTouch devices is the additional ram. That's it! You CANNOT fit a 32A ROM on the device because it lacks the internal storage. Even if you COULD the kernel for that rom would require a 32A radio. You cannot use a 32A radio because the 1.33.0013 32A s-ON spl requires the 32B radio. And it requires a 32B radio else it will brick. The 1.33.0013 is the S-ON stock SPL that the phone requires to use the memory map. If you try the Engineering SPL (1.33.2010 32B S-ON) the phone might boot, but you will not have touch screen or the use of the headphone jack because of the different drivers and memory map. When you flash the Engineering SPL it will read 32B because that is what is needed to flash the custom recovery and roms. However your device will not work properly because it's a 32A/32B hybrid. You need the 32A stock firmware (1.33.0013 S-ON) for the phone to operate. You also need the appropriate 32B radio and rom as well.
I have the phone and I've had it since it's release. I started off by making custom roms for it and ports before roms were using VoxLuna's driver patch. Trust me when I say that I know a little about this damn phone!
You know what... to hell with it. Do whatever you want. Don't be sending me private messages begging for help when you brick your device because you think it's a 32A.
Click to expand...
Click to collapse
And I thought the Vibrant forums were hostile. I am glad that you have had your phone for so long and I am quite sure you know what you are talking about. Like I stated, this phone is just sitting around the house collecting dust and thought I would mess with it. If I brick it... great. If I make it the fastest MyTouch it can be... great.
Don't get me wrong, I appreciate what you and all the other developers and contributors do for random users like myself, but give a guy a break. You have to admit that this phone is a little dated and it's like knowing how to run Windows Vista and 7 then going back to do the same things on a Commadore.
DonJuan692006 said:
The problem. You forgot to mention that you also flashed a non-perfected SPL at some point before flashing CM 5.0.8. You need to get that fixed. Luckily you can fix it without a goldcard since you've already got S-OFF.
Download these:
hboot.nb0 for myTouch 1.2 only
Amon Ra 1.7.0-G Recovery
Go to this URL and follow the steps to get ADB setup if you don't already have it. Then go here and follow steps 7, 8, and 9. In step 7, you should only need to run:
fastboot flash hboot hboot.nb0 (the 0 at the end of this line is a zero not an oh).
fastboot flash recovery recovery.img
fastboot reboot-bootloader
After that just reflash CM 5.0.8, although I'm using CM 6.1 and it's just as good, but with the perks of Android 2.2. I would suggest reading through that thread I linked to get more familiarity.
Lastly, I will warn you that this isn't the easiest way to get your phone fixed, but this is the way that I learned about my phone, so it should help you out in that aspect. I'm sure mumilover or someone else may come along with a simpler solution.
If you have any problems, let us know here.
Click to expand...
Click to collapse
Exactly, all he needs is a custom G recovery (which he should have) and then flash the 1.33.0013 stock spl BACK on. Afterwards, he can flash any 32B rom he wants and it should work as long as it's later than CM-4.2.15.
DonJuan692006 said:
The problem. You forgot to mention that you also flashed a non-perfected SPL at some point before flashing CM 5.0.8. You need to get that fixed. Luckily you can fix it without a goldcard since you've already got S-OFF.
Download these:
hboot.nb0 for myTouch 1.2 only
Amon Ra 1.7.0-G Recovery
Go to this URL and follow the steps to get ADB setup if you don't already have it. Then go here and follow steps 7, 8, and 9. In step 7, you should only need to run:
fastboot flash hboot hboot.nb0 (the 0 at the end of this line is a zero not an oh).
fastboot flash recovery recovery.img
fastboot reboot-bootloader
After that just reflash CM 5.0.8, although I'm using CM 6.1 and it's just as good, but with the perks of Android 2.2. I would suggest reading through that thread I linked to get more familiarity.
Lastly, I will warn you that this isn't the easiest way to get your phone fixed, but this is the way that I learned about my phone, so it should help you out in that aspect. I'm sure mumilover or someone else may come along with a simpler solution.
If you have any problems, let us know here.
Click to expand...
Click to collapse
Thank you for the non-violent approach. I know how it is when you have a new guy just blowing his phone up and he goes screaming for help. Not what I was trying to do. Just tinkering with a new device to get some more know-how under the belt.
Much appreciated, Don!
I will let you know what I can get accomplished with your advice.
offdutyninja808 said:
And I thought the Vibrant forums were hostile. I am glad that you have had your phone for so long and I am quite sure you know what you are talking about. Like I stated, this phone is just sitting around the house collecting dust and thought I would mess with it. If I brick it... great. If I make it the fastest MyTouch it can be... great.
Don't get me wrong, I appreciate what you and all the other developers and contributors do for random users like myself, but give a guy a break. You have to admit that this phone is a little dated and it's like knowing how to run Windows Vista and 7 then going back to do the same things on a Commadore.
Click to expand...
Click to collapse
He wasn't fussing at you, he was getting at the other guy for feeding you false information.
Sent from my HTC Magic using Tapatalk
My apologies, Binary. Following forums over time you tend to see so much hostility over pretty much nothing. It's a learning experience. Just as I had to learn my other phone, some things the hard way, I will be able to steer people in the right direction and help others after I get this one down.
offdutyninja808 said:
And I thought the Vibrant forums were hostile. I am glad that you have had your phone for so long and I am quite sure you know what you are talking about. Like I stated, this phone is just sitting around the house collecting dust and thought I would mess with it. If I brick it... great. If I make it the fastest MyTouch it can be... great.
Don't get me wrong, I appreciate what you and all the other developers and contributors do for random users like myself, but give a guy a break. You have to admit that this phone is a little dated and it's like knowing how to run Windows Vista and 7 then going back to do the same things on a Commadore.
Click to expand...
Click to collapse
I'm not trying to be hostile but all of the information is available here in the forums. The developers, senior members and moderators like myself have spent HUNDREDS OF HOURS making sure it can be referenced one way or another. They are in stickies and even in MY SIGNATURE. The only other thing we can do for you is do it ourselves! Yet even with a clean and clear explaination this still comes up. We even get some people that post threads saying that they bricked their phones because they thought for sure it was a 32A and they try to hold me responsible. I will be happy to forward some hateful e-mails to you that I get at least 2 or 3 times a week average because people couldn't find the information... yet... if they followed rule #1 of the forums... they wouldn't have the problem.
Look... at least you got the right information and avoided bricking your phone. But I really hate repeating myself over and over again with the same information so I need to be tougher to get my point across otherwise other members will likely use the wrong information and end up breaking their phones... which I will not be held liable for!
DonJuan692006 said:
He wasn't fussing at you, he was getting at the other guy for feeding you false information.
Sent from my HTC Magic using Tapatalk
Click to expand...
Click to collapse
Right on Don. I'm not angry at you OffDutyNinja808 however the other guy (CBATESY) should be warned that I could give him an infraction for giving out bad information.
Binary100100 said:
Right on Don. I'm not angry at you OffDutyNinja808 however the other guy (CBATESY) should be warned that I could give him an infraction for giving out bad information.
Click to expand...
Click to collapse
On another note, Don, I made a new sticky thread just for this issue.
Feel free to add your wisdom to it.
http://forum.xda-developers.com/showthread.php?t=893004
Okay... so I followed Don's instructions and the phone now says:
SAPPHIRE PVT 32A SHIP S-ON G
HBOOT-1.33.0013 (SAPP31000)
CPLD-13
RADIO-2.22.23. 02
I tried flashing the same CM and it gets past the mytouch splash but doesn't go past the next loading X screen.
From what you guys said everything is looking right. Any thing look out of ordinary or sound crazy from what i'm saying?
Thanks again!
Sent from my GT-I9000 using XDA App
offdutyninja808 said:
Okay... so I followed Don's instructions and the phone now says:
SAPPHIRE PVT 32A SHIP S-ON G
HBOOT-1.33.0013 (SAPP31000)
CPLD-13
RADIO-2.22.23. 02
I tried flashing the same CM and it gets past the mytouch splash but doesn't go past the next loading X screen.
From what you guys said everything is looking right. Any thing look out of ordinary or sound crazy from what i'm saying?
Thanks again!
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
Loading X screen?
What rom are you trying to install?
What kernel?
And now i'm in like tube socks! I just woke up and tried it again and it booted right up.
Binary, it was the same CM 5.0.8-DS. As far as the kernel goes, I didn't flash any separate. The X boot screen I mentioned is the Nexus One load screen (I believe).
The only thing that I did differently this morning was wipe/factory reset, then davlik.
Okay... so from my understanding now:
I have to have a perfected SPL, not an engineering SPL.
I have to use the custom (AMAN RA) recovery and never use ClockworkMod.
Ensure that any other roms I want are 32b.
Now as far as the radio goes, is it best to stay with the radio it came with?
Again, thanks for the advice!
Sent from my GT-I9000 using XDA App
DonJuan692006 said:
The problem. You forgot to mention that you also flashed a non-perfected SPL at some point before flashing CM 5.0.8. You need to get that fixed. Luckily you can fix it without a goldcard since you've already got S-OFF.
Download these:
hboot.nb0 for myTouch 1.2 only
Amon Ra 1.7.0-G Recovery
Go to this URL and follow the steps to get ADB setup if you don't already have it. Then go here and follow steps 7, 8, and 9. In step 7, you should only need to run:
fastboot flash hboot hboot.nb0 (the 0 at the end of this line is a zero not an oh).
fastboot flash recovery recovery.img
fastboot reboot-bootloader
After that just reflash CM 5.0.8, although I'm using CM 6.1 and it's just as good, but with the perks of Android 2.2. I would suggest reading through that thread I linked to get more familiarity.
Lastly, I will warn you that this isn't the easiest way to get your phone fixed, but this is the way that I learned about my phone, so it should help you out in that aspect. I'm sure mumilover or someone else may come along with a simpler solution.
If you have any problems, let us know here.
Click to expand...
Click to collapse
Don, two things...
1. I searched through the ROM bible and didn't find any place to download 6.1.
2. When I try to download the Google Apps from the page you sent me the link to yesterday, it asks for a user name and password. I have 5.0.8 up and running, but with no market and things like that.
Thanks!
Okay... I am now running FroyoRedux-1.9.5 with the Galaxy theme. Everything is smooth as butter.
I fixed the links in the post I pointed you to and updated them to what you news for CM 6.1
Sent from my HTC Magic using Tapatalk
offdutyninja808 said:
And now i'm in like tube socks! I just woke up and tried it again and it booted right up.
Binary, it was the same CM 5.0.8-DS. As far as the kernel goes, I didn't flash any separate. The X boot screen I mentioned is the Nexus One load screen (I believe).
The only thing that I did differently this morning was wipe/factory reset, then davlik.
Okay... so from my understanding now:
I have to use the custom (AMAN RA) recovery and never use ClockworkMod.
Now as far as the radio goes, is it best to stay with the radio it came with?
Again, thanks for the advice!
Click to expand...
Click to collapse
You can use clockwork. I use it without any problems. Some people like AmonRa better though. If you run CM6 there have been issues about people not being able to flash the recovery for some reason. Just keep trying and it will stick eventually. Just make sure that you flash the one for MyTouch/Ion devices.
Radio - keep the one that your using.
Roms - 32B ONLY