keyboard keeps resetting to default - Touch GSM General

I installed the touch keyboard + touch keypad and changed the immission setting in the system. When I switch off and on the keyboard resets to the default one. How can I avoid this?

You haven't posted what keyboard exactly, the rom you use, or your phone details. Can you get these and I can have a look

Related

HD virtual keyboard stuck in compact

Strange problem: I've search google and here at xda, but find nothing even close.
Discovered the answer in the event others experience this strange situation: Download "sipchange" (google). It nailed this perfectly.
The keyboard defaulted to compact mode about a week after I received the phone. I hard reset (ROM version 1.14.405.3) and did not install any applications, anticipating perhaps a program conflict was my problem. After two days is did the same thing.
The only thing I've tried is changing input methos in the settings node. After I choose full QWERTY (or any other keyboard selection) and select OK, the settings default on compact.
Anyone know the registry setting to force the keyboard to full QWERTY? Maybe this is a known issue....
Any assistance would be greatly appreciated.
EDIT: Still no joy - I installed Touchpal 3.5, however the in input selection for Touchpal 3.5 will not take either.
Edit: Cleared ROM - flashed firmware. This defaults to full QWERTY. I then installed Touchpal 3.5, but my HD would not change to the touchpal keyboard after selecting options and rebooting.
Might this may be a hardware/keyboard mapping problem?
Yes, I have issues with this too.
I use two particular input methods: Block recognizer (I'm an ex-Palm user) and SBP Keyboard. I have to select which to use, using the input selection pop-up menu, which appears next to the keyboard icon under the keyboard.
Problem is I want to customise that menu as the default options (Touch input settings, Phone Keypad, Compact QWERTY, full QWERTY and other input methods>) only leave room for one other option.
Any ideas ?
Many thanks.

Having problems selecting QWERTY keyboard.

Hi!
I received a Touch HD few days ago and from the first time I noticed that something doesn’t works properly.
Initially the keyboard by default was the QWERTY one. I changed it to probe the compact one. I did the change with no problems (obviously was not a difficult issue). Well not so obviously because the problem was when I tried to return to full QWERTY keyboard.
I selected the fullQWERTY in the configuration menu, I pushed the OK button but when I tried to write a new message the compact keyboard was still there. I tried to change to any other keyboard but the result was the same. I haven’t installed any keyboard so is not a software incompatibility issue.
I reset the phone, check for rom updates, etc but I cannot select QWERTY keyboard. I have search about this but the only information I found is a post in this forum with no answer.
Please, any information about a possible solution will be greatly appreciated. Just imagine a wonderful HD without its QWERTY keyboard…
Thank you very much.
I have the same issue. A full reset did fix it but then it randomly happened again. Obviously that's not ideal!
Any ideas anyone?
Might it be worth an email to htc?
You checked for ROM updates using? I'm sure there is some registry key but not really certain.
Regards,
Carty..
I have encounter the same issue. I have found out that if you go through setting and select keyboard to change..it will not work...
It seems that touchflo took over the registry.....
Now the correct way to change your keyboard is to
1. press your keypad up.
2. you should see this little arrow beside the your keypad icon
3. when you tap the arrow you will see this menu pop up to pick the keyboard layout.
This is the ONLY WAY to change the keypad
Hope this helps
JuanQ said:
Hi!
I received a Touch HD few days ago and from the first time I noticed that something doesn’t works properly.
Initially the keyboard by default was the QWERTY one. I changed it to probe the compact one. I did the change with no problems (obviously was not a difficult issue). Well not so obviously because the problem was when I tried to return to full QWERTY keyboard.
I selected the fullQWERTY in the configuration menu, I pushed the OK button but when I tried to write a new message the compact keyboard was still there. I tried to change to any other keyboard but the result was the same. I haven’t installed any keyboard so is not a software incompatibility issue.
I reset the phone, check for rom updates, etc but I cannot select QWERTY keyboard. I have search about this but the only information I found is a post in this forum with no answer.
Please, any information about a possible solution will be greatly appreciated. Just imagine a wonderful HD without its QWERTY keyboard…
Thank you very much.
Click to expand...
Click to collapse

default keyboard keeps changing back to original

when ever i aet a custom keyboard as my default it changes after i restart my phone :s
any ides why or a fix?
From Finger Keyboard 2 thread:
Rozenthal said:
SIP CHANGE:
Installing this will allow you to keep FingerKeyboard as default keyboard after you soft-reset the device. Normally, it would switch back to default WinMo keyboard after every soft-reset, and it would have to be reselected under input options. Keep in mind that for this to work with Touch HD, you must increase the timeout delay to at least 50 seconds!
Click to expand...
Click to collapse
I have this problem too, and even after Finger Keyboard 2, it still changes back after soft reset.
I don't know if we'd need to change that timeout setting. It's not clear how to do that.
The old version of Shap's Advanced Config xxxxxxxx [edit]
EDIT: I got confused. See the post below about using SKTools to do it. That's what I used
10 second delay has worked for me with both the Blackstone keypad and Finger Keyboard 2.
hi guys.
i found better solution.install latest sktools.start sktools.choose category.under maintenance/input methods choose fingerkeyboard as default keyboard and soft reset sexperia.voilayour default keyboard is fingerkeyboard v2.cheers

Turn off XT9 permanently and stop it from interfering with Swype?

I've installed Swype and really like it. I'm using SIPchange to enable it as a default. Unfortunately, XT9 will interfere with the words selected by Swype even after you've picked the right word. The only way to disable this is to manually change to Touch Input keyboard and disable XT9 on the keyboard before changing back to Swype.
I've already disabled both Spell Correction and Word Completion in Touch Input under Settings> Personal> Input> Touch Input> Options, but XT9 still turns on the next time I restart the phone.
Hi, I'm using swype too and haven't noticed any interference from XT9, but I might not have known what I'm looking for.
What are your symptoms?
I have had that happen to me before on certain Roms... cant tell you which one... usually, it works fine (I am using Topix Rom now)
When it did happen, I turned off XT9 under the settings but I ALSO opened the default keyboard and turned it off there but pressing the key.... moved back to swype after that and the xt9 word options were gone... just the usual swype dictionary/options at times.... Soft reset didn't change anything... it was all ok still
Hope this helps
Unfortunately for me, once I shutdown/soft reset the phone, XT9 is automatically activated on the Touch Input keyboard again even though everything has already been turned off in the Settings>Personal>Input. Also, it seems that the Touch Input keyboard automatically defaults to one of the Chinese input methods instead of English. Maybe that's where the problem lies. Where can I default the Touch Input keyboard to English?
BTW, I have my Locale set as Australia, so that isn't the problem.
The symptoms are: Once you've "Swyped" the word and pick the one you want, XT9 then shows up with it's word choices and either shows the same word or if I have it initial caps, make it all small letters
I also noticed that in Settings>Personal>Input, when I select Swype then click the "OK" button, it doesn't save the selection, and goes back to "Touch Input" when I open the "Input" dialogue again. I guess this probably means that some of my registry entries are toast...
That is indeed weird... do you have something like SIP change installed? I use that to start Swype by default during startup after a restart.. Don't know if that might help...
Yes, I do have SIPchange installed, but it's already set to Swype as the default.
I had the same problem and this is my partial solution.
Go to HKLM/Softwares/Tegic/eT9/IsSupportMSSIPContact
Change the Dword from 1 to 0.
this will get rid of XT9 for Swype but only if it is NOT the default. Therefore, there is the nagging inconvenience of having to change it to Swype every time your soft reset. But it is better than that nothing.
Thanks for the partial solution. It's at least better than what I'm doing now after every reboot, which is to:
1. change Swype to Touch Input
2. change Touch Input to EN so that the keyboard shows up
3. click on the XT9/ABC button
4. change Touch Input back to Swype..
One thing to note, I just went to the registry and there isn't the value you listed. However, there is the following string value:
HKLM\Software\Tegic\eT9\LRU_MS_InputMethod and the value is Swype.
I'm wondering if this is what is causing XT9 to activate when Swype is active.. Do you have this value in your registry? what value is it?
Quick edit to note that I added a DWORD IsSupportMSSIPContact with value "0" and soft reset... Sorry to say that it didn't disable XT9 even if Touch Input was defaulted. Guess my problem is slightly different than yours.
Yes, all those values are the same. Need ot check if you also disable xt9 using some .cab. If not then you will need to do the following:
HKLM\System\CurrentControlSet\Control\Layouts\e0010409\Ime File
Change it to read as compime.dll
and
HKLM\System\CurrentControlSet\Control\Layouts\e0010409\Layout Text
Change to COMP IME
This will disable eT9. Please remember the original values should you want to revert back.
I think that should work.
have fun.
weenween, the two registry values you gave are already what is on my phone..
But XT9 still enables itself when I restart the phone. I've now resigned myself to disabling XT9 on the Touch Input keyboard manually each time I restart the phone.
In any case, thanks for your help.
I have exactly the same problem adn symptoms as GregWee. Must be becasue we both have Hong Kong HD2s where the default english keyboard is PinYin?
I have a similar issue. I have a TMOUS HD2 with QQ 2010 mobile loaded on it for chinese text entry. The QQ keypad has become the default everytime I reboot - entirely unwanted. Somehow it interferes with the contact dropdown list in messaging and email. It has something to do with the T9 staying on when entering a contact name. I installed sipchange but it does not overide the QQ default after a soft reset.
After changing between keyboards a few time it begins to work properly in email and then finally in messages. Right now, since the last soft reboot and playing around, when I am in either email or messages the stock keyboard will automatically switch from T9 to abc when I move the cursor to enter a contact name. The contacts appear as I type as they should. Swype works fine too. I have no idea what I did to get it to work but I have had the same experience several times today. Hopefully I will figure it out.
I would like to know a way to override the QQ as the default keyboard. I think this might fix the problem.
Any suggestions?

Second layout for physical keyboard

Hi all,
I've been playing around with my wife's MS2, running Tezet's CM10. I've been trying to get her phone to be able to have two seperate keyboard layouts for the physical keyboard, namely English (QWERTY) and Hebrew.
So far the only solution I've found is to use AnySoftKeyboard with the Hebrew plugin from the market which allows me to change the layout on the soft keyboard and then when I pull out the physical keyboard the layout remains as selected. Any other keyboard (stock or otherwise) that I've tried reverts back to QWERTY when using the physical keyboard, although once I shut it the soft keyboard remains as selected.
Isn't there any way to have the same behaviour as AnySoftKeyboard on the stock keyboard or even better, on Swiftkey? Or some other way of doing it?
Thanks for any help!
Edit: Posted here and not on the CM10 thread because this has been the case on every ROM I have tried...

Categories

Resources