hi all
The phone dropped and the screen crocked. The screen was replaced,
Phone turns on, screen is fine, the only thing is not working is the bottom operation buttons
how to fix it any idea?
thanks
Related
Hi there!
I have absolutely ridiculous problem with my THD. All of a sudden screen started to act like it is half disabled. In simple words, if a touch some icon on top bar, let's say Start button, click appears on clock. Basically it is looks like touch area displaced by half an inch down. I've tried to calibrate screeen and it seems like it worked for a few minutes and then turns back. I had to hard reset the whole thing and it did not help either. All images, icons, screen items appeared correctly on screen. Bottom menu bar responses correctly though.
I did not drop the phone if it will give a clue.
Anyone knows what the hell is that and how to fix that problem? Please help.
Thank you.
Anyone? Please...
sounds like you need to re align your touch screen. you need to go to Start>Settings>System>Screen then align screen
If you cant get to this then a Hard Reset might be the only way to go
Nothing is working. Now I cannot even get past screen alignment. Looks like it can be a hardware problem.
u may have to hard reset
then after that if it still wont work then u may need a replacement
Yeah. It sound like it is. Jast called HTC support, did hard reset again and after few minutes it is back to that misalignment. Damn...
Connected to ActiveSync and have you got 'My Mobiler' running? I noticed some strange screen behaviour with that on the Device and the host PC.
try pressing both volume keys and tapping the screen at the same time(volup + voldown + tap the screen) --- it will get you to align screen mode if that doesnt work then maybe you have some problems while flashing a rom or something!
TPEHEP said:
Yeah. It sound like it is. Jast called HTC support, did hard reset again and after few minutes it is back to that misalignment. Damn...
Click to expand...
Click to collapse
I am having the same problem, it started suddenly somedays ago. I realized that when I hard rest it works fine for some time and then slowly left side of the screen stops responding, after a while only right side react to touch so you cannot access START menu nor anything else from the whole screen, just the left corners.Any solution?
Since two days I have strange behavior of my Blackstone touchscreen.
Just after start (or reboot) it works correctly but after few minutes when I hit for example start button it actually point about 1,5cm upper. So all touches has offset and hits not in the correct place like this:
Hit spot
^
|
|
Touched place
If I mange to go setup->screen->Align screen it's fine for a while and again after few minutes it's happen again.
ROM is Energy.BLACKSTONE.23149.Sense2.5.Cookie.2.0.Dec.01
Do anyone have the same issue?
It's more software or hardware problem?
At least yours still works... I also got problems with touch offset and decided to change the digitizer... but broke the lcd screen during the operation...
My device was acting just like yours: after screen alignment it worked for couple minutes then just went crazy... unfortunately, it's a hardware problem (problems between the first and the 2nd layer of the digitizer).
To align the screen more convenient just do this at any moment (with the phone switched on):
Press VOL UP and VOL DOWN simultaneously and while keeping them pressed, lightly touch the screen. This will surprisingly initiate the screen alignment procedure.
Hard reset?
Hello guys! i got very very strange problem from last night... when i turn on phone, everything works great...but after LOCK (no metter knock on or manualy or whatever), after that screnn touch dont work at all...only restart help until next screen off (lock)...
trying everything...new rom...flash to stock...always same...now i turn off screen lock at all...so my screen is always on...
ANY IDEA? Or hammer will work!!!
ps i tried update touch firmware but when i click on it...screen freeze....and again just restasrt help...
i also tried set FACE UNLOCK...it works...phone unlock...but touch screen is freezed...im confuzed...when restart and before locking everything works fine...touch work perfectly...but after screen off...only physical buttons works...
Hello
I buyed a second hand lg g2 d802
The screen got replace on this on,
Everything works but sometimes wen wake up the phone the screen is static / snowy, but power off with power buttom reboot the phone and screen works again... Got no clue what is wrong
davjan said:
Hello
I buyed a second hand lg g2 d802
The screen got replace on this on,
Everything works but sometimes wen wake up the phone the screen is static / snowy, but power off with power buttom reboot the phone and screen works again... Got no clue what is wrong
Click to expand...
Click to collapse
Unstable connection between flex cable and LCD, it may need to be changed or just taped to hold the connection better. PM me if you want to know more
Hello!
I am new to this forum but I havent found an answer anywhere on the internet. I have a Samsung Galaxy S8 plus with a small crack in the screen in the corner(I dont think its relevant). I have had this phone for almost 2 months.
My problem is: If the phone is locked and I press either the home or lock button, the phone vibrates and it works but the screen will still remain black(lock screen will not be displayed). I know the phone works even when the screen is not working because if I swipe on the black screen, the iris scanner will turn on. I can get it to work but only if I try turning on and off the phone a lot of times until the screen finally turns on. After the screen turns on, I dont have any problems with it(just there are a few lines on the screen from the crack).
Any suggestion might help,
Thanks a lot
well its obviously broken, send it in for repair and pay up bi... man.