hello, i would use android on my hd2 so i could ping with whatssap but i didnt knew it remove my windows mobile, thats a ****ed up part if i knew i wouldnt did it, but okay i did everything they sayed but the final step dont work when i try 2 launch android it dont work it just show me a lil bit text like 3 rules and then the screen turns black and dont switch back
i used this tutorial:
till 8:28
www(dot)youtube(dot)com/watch?v=CRKxsM_yqJQ&feature=related
then turned to the other part:
www(dot)youtube(dot)com/watch?v=EWtNJ81RW4s&feature=related
and this is a vid what happening:
www(dot)youtube(dot)com/watch?v=yQ25FxvO9eQ
i used:
Hspl3_pkg
leo_softwareupgrade (energy rom)
froyo 2.2 version3 darkstone
www(dot)4shared(dot)com/file/eX1enbYn/HSPL3_PKG(dot)html
www(dot)4shared(dot)com/file/di6wRNw1/EnergyLeo23678Sense25CookieAug(dot)html
www(dot)4shared(dot)com/file/T3ZIT5Kv/FroyoStone_Sense_V2(dot)html
Replace the (dot) with a .
else i couldnt make this thread
is it btw possible to just have the normal winmo 6.5 and can switch to android, cause i dont like the energy, i just want the normal winmo interface with the android loader of mskip so can choose android or winmo at the start up
Thanx, Greetz Iefen
bump no one?
first of all
grow up
and just try to instal hspl (the good way?)
^^^ LMAO !!
and when the screen turns black this mean you have improper radio (A radio that doesn't make Android boot)
have a look at this thread :
http://forum.xda-developers.com/showthread.php?t=732380
look at the radio section
Related
I love android and i istalled it yet...but i chaged rom and now it doesn't work....when i istalled it i had leo ita rom...now i istalled chucky ita rom ad my android doesn't start...i tried adroid V% ad froyo but nuffin....it does't want to start....when i installed V5 harte starts but when it's fiished it cames a with screen and anything more...and i must put off the battery and switch on...ad if i istall froyo it starts and then it stops...with blaci scrren and white words and linux image on the top...lol....so?? my radio is 2.12.
I need android...please someone can help me....i also istalled the new cab that create a shortcut on the menu with ur favorite android...mskip android loader....but nuffin..it doesn't work.......thx buddies
ohh man... I would read the sticky first, it has all the info you need to install android.. The white letters and blackscreen with Linux logo on top suppossed to be there..
I would:
Take out Sim and SDCARD
Hard reset my HD2
Task 29 it
Put a decent WINMO rom on it..
Put a radio on that suits Android
Hard Reset again...
Get a Android Build (i recommend Froyo v1 by Darkstone)
Put it on the SDcard as instructed
After thats done install Mskip's android loader, wont work the other way around..
Research the stickies!! Don't get freaked out! Read read read, follow the tutorials.
ChriGothiMark said:
I love android and i istalled it yet...but i chaged rom and now it doesn't work....when i istalled it i had leo ita rom...now i istalled chucky ita rom ad my android doesn't start...i tried adroid V% ad froyo but nuffin....it does't want to start....when i installed V5 harte starts but when it's fiished it cames a with screen and anything more...and i must put off the battery and switch on...ad if i istall froyo it starts and then it stops...with blaci scrren and white words and linux image on the top...lol....so?? my radio is 2.12.
I need android...please someone can help me....i also istalled the new cab that create a shortcut on the menu with ur favorite android...mskip android loader....but nuffin..it doesn't work.......thx buddies
Click to expand...
Click to collapse
Im sure that this could've been answered in the -post your question here- topic, instead of everybody opening a new one..
but okay:
1. If WinMo still works, no need to reflash your Rom
2. If WinMo fails as well, do a task29 or MTTY to completely wipe the NAND memory.
3. (BACKUP!) and format your SD.
4. Delete ALL YOUR android files you've installed so far as it might be failing here as well.
5. Install fresh new Rom en Fresh new Android as followed by the instructions 120%.
EDIT:
MMAwarrior beat me to it.
MMAwarrior said:
ohh man... I would read the sticky first, it has all the info you need to install android.. The white letters and blackscreen with Linux logo on top suppossed to be there..
I would:
Take out Sim and SDCARD
Hard reset my HD2
Task 29 it
Put a decent WINMO rom on it..
Put a radio on that suits Android
Hard Reset again...
Get a Android Build (i recommend Froyo v1 by Darkstone)
Put it on the SDcard as instructed
After thats done install Mskip's android loader, wont work the other way around..
Research the stickies!! Don't get freaked out! Read read read, follow the tutorials.
Click to expand...
Click to collapse
I read...and to another italian users who have my same rom it works....why at me not????
lol Arent we Dutch Helpfull.....
ChriGothiMark said:
I read...and to another italian users who have my same rom it works....why at me not????
Click to expand...
Click to collapse
He might have the same Rom, but not the same Radio/Files/Build/zImage etc..
Chucky's Rom is suppossed to work, you might have done something wrong, in other words try a clean and fresh install.. Then you'll know it's good for sure..
Takes you about 30 min at most, (minus the researching, and downloading previous apps)
So..iffff i put radio 2.10. coz when i had it android worked....
ChriGothiMark said:
So..iffff i put radio 2.10. coz when i had it android worked....
Click to expand...
Click to collapse
This was posted in the READ THIS TOPIC FIRST thread; certain roms work with android, and below 2.08 android might not want to boot at all.
so...what do u recommend me to do???
ChriGothiMark said:
so...what do u recommend me to do???
Click to expand...
Click to collapse
If 2.10 worked, reflash it to 2.10.
If it's still broken, follow my or MMAwarrior's advice.
1. Take out SD-card and Sim.
2. Task29 (MTTY)
3. Reflash Radio (any of the adviced Radio's in the Sticky, read it)
4. Reflash Rom
5. Insert SIM and SD-Card and backup important data (not the android files)
6. Format SD-card
7. Restore Data
8. Install fresh-new Android, and don't mess about
hey buddies donìt worry i rsolved..i istalled froyo by darkstone ad no it works very very very good..i can do all...buy call text gps recharge battery ...like my winmo...wow...i wanna android OS lool...
Halleluja!!!
I'm happy for ya! Have fun, next time READ be4 installing anyhting
yeah thx buddy..ahahhah halleluja.........ad droid is fabolous
i installed android on my sd card for use with Psfreedom but now when i boot into windows mobile htc sense fails to load help me please
dude just flash winmo over
remove the sdcard then reboot.... that should at least get you back to winmo
i can boot into windows but sense wont load
flashing a rom is ur best option
Radio must be developed to the latest version
I think
I'm not sure
Unfortunately, I would like to help you
it has winmo on it its not the stock one i believe its one from a dude that starts with a Krsxy or somethings build
Why would you open this thread here when darkstone got a whole thread for this. Add on to the 46 pages. Thats pretty bad when you don't know what winmo rom your running
re-flash winmo dude and stop asking the same thing
I'm new to all of this...I've done all the step but when i go to run clrcad and haret my phone show some small white words...The the screen is stuck on a black screen with htc in green...Can anyone tell me what i've done and what i need to do to get android running on my htc hd2???? Please and Thank you..
use android that came with data.img so then u wont need to wait 10min or more
then u will be able to save time and see if the android really not working
Thanks for answering...I've tried a couple drifferent androids and i get the same thing everytime...
You may need to leave it for as long as half an hour (or possibly more) for the first boot, while it creates the disk image. It sounds like it's working. Just make sure to delete any data.img from the android folder (in case it started to create one and you stopped it) and then reboot.
If you go an hour and it's not worked then there's something wrong.
what radio version do you have on your HD2. it needs to be above 2.08 and ending in .50 not .51
colinm said:
what radio version do you have on your HD2. it needs to be above 2.08 and ending in .50 not .51
Click to expand...
Click to collapse
yes right, radio version is important, though u can try to install hspl or hsp2, but for me it didnt work ( i had same problem like some small white text on black srceen), then i updated the rom from htc site to the latest rom after i install it worked well.
But now i'm facing new problem like when i restart my device it boots on WM, so i digging for this problem, if anyone can help me for this problem i'll be helpful.
Thanks
Faisal
search button - type "dual boot hd2" then hit enter....
Hi all. I'm a noobi trying to do this for a friend. (I have a g2 rooted and running Cyanogen, and also my old g1(RIP)) So I thought i'd do him a favor getting rid of winmo 6.5...
How long should this process take? I installed HardSPL in minutes, as well as the Leo radio, but installing this ROM (HD2ONE) is taking literally over 3 hours...?
I am getting a series of entries...
[11597.687809] microp_set_bkl (9)
[11600.297806] microp_set_bkl (9)
[11640.409605] ACR=2446 FL=1256 RAAC=38
[11690.529594] ACR=2438 FL=1256 RAAC=38
[11740.729593] ACR=2429 FL=1256 RAAC=37
[11790.929601] ACR=2421 FL=1256 RAAC=37
[11840.999595] ACR=2413 FL=1256 RAAC=37
[11891.129596] ACR=2404 FL=1256 RAAC=37
[11941.329591] ACR=2396 FL=1256 RAAC=36
which have been moving from RAAC 75 or thereabouts...
I am afraind I made a mistake somewhere...
Is the process just running slow on this phone?
In case you're wondering... I installed radio 2.15.50.14
and DarkForces Team HardSPL3 by bepe and Cotulla...
Thanks for any feedback
Dave
I hate to be the bearer of bad news, but you have a problem. Or that's what I think. :X
I am wondering if something simple happened..
I just plugged in a usb charger, and the progress of the RAAC=[number] started going up?!
I think I read about a user trying to do a rom upgrade who ran out of space...
and then the messages (not the same as the ones i've been getting) indicated to someone out there that the battery was simply discharging.
if this was it... then
What is the best way to revert back for now..?
From what I'm reading you tried to flash an Android rom onto the phone to replace WM6.5, right...
If you are flashing to NAND - phone memory, then you need MAGLDR to flash otherwise it will probably be a brick...
Mind you I only glanced at this as I was running out the door to work.
Here is the post I was referring to earlier...
http://forum.xda-developers.com/archive/index.php/t-817544.html
Are u sure that is it still the install process and not the first startup?
Did u use the Magldr or just booted the Android from within Win Mo?
If im not totaly wrong this shows the charge and discharge of the batterie.
So it seams only that this Rom isnt working for u. If u started it from within Winmo just shut down the phone and boot to Winmo so u could try another Android.
OK. I pulled the battery, and windows booted. Where do I get info on MAGLDR? Got a thread for me? I am trying to set this up as a boot to android only device...
Dave
Here u can find all Information to the great Magldr:
http://forum.xda-developers.com/showthread.php?t=893618
And Roms for NAND flashing can be found in the Android Rom Forum.
But read carfully before just flash something to your phone
If u have problems with something u will find in this threads more than one helpfull person. So dont be shy to ask.
http://forum.xda-developers.com/showthread.php?t=893948
Hi!
The touchscreen of my phone almost doesn't work. I've read many topics about this in different forums and maybe a solution would be to reinstall all from 0 (resetting the phone with that yellow button when you revome the back doesn't work anymore).
So, I want to try to install android hoping this will solve the problem. If not, my phone will be a thin brick in a drawer.
Since the touchscreen is not working correctly, I can't go to see the details in the menu.
The phone was flashed once and currently has a rom called BSB beast 6 and when I turn it on, this red numbers appears:
2.10.50.26
15.39.50.07u
2.11.86834 8g
Current OS is Windows Mobile 6.5
I believe android will work with the current rom without the need of installing another one before, right?
Would recommend me one rom (android NAND) to put? because I saw a lot in thread here and I don't really understand what the differences would be. I just want the phone to work
I hope this is enough information
Thanks a lot!
If you want to flash Android what you need to do is...
Make sure you have 2.08.HSPL (I'm assuming you do as you have a custom ROM).
Then flash the newest radio (2.15.50.14)
Flash MAGLDR
Flash a NAND ROM of your choice.
Though I doubt that will fix the problem. Your digitizer is probably gradually dieing. You can easily get it fixed for about $80.
alc112 said:
Hi!
The touchscreen of my phone almost doesn't work. I've read many topics about this in different forums and maybe a solution would be to reinstall all from 0 (resetting the phone with that yellow button when you revome the back doesn't work anymore).
So, I want to try to install android hoping this will solve the problem. If not, my phone will be a thin brick in a drawer.
Since the touchscreen is not working correctly, I can't go to see the details in the menu.
The phone was flashed once and currently has a rom called BSB beast 6 and when I turn it on, this red numbers appears:
2.10.50.26
15.39.50.07u
2.11.86834 8g
Current OS is Windows Mobile 6.5
I believe android will work with the current rom without the need of installing another one before, right?
Would recommend me one rom (android NAND) to put? because I saw a lot in thread here and I don't really understand what the differences would be. I just want the phone to work
I hope this is enough information
Thanks a lot!
Click to expand...
Click to collapse
Read this:
http://forum.xda-developers.com/showpost.php?p=12105680&postcount=1