Database Users

[Q] Boot Failure Black Screen Green HTC

Hi, this is my first post on this forum so first of all I would like to appolagise for all the things I've either just done wrong, or am about too....
I am trying to install android on to my phone, I am on the stock rom but have succsesfully installed HSPL3 and radio version 2.11.50.20.
I have tried a few builds of Android but allways have one of 2 results.
Once I've run clrcad followed by harlet, it tells me I'm booting to linux. The screen then goes black, it runs about 8 lines of code, stops there and changes to a black screen with a green HTC. Where it remains indefinatly.
A friend with anouther HD2 has android working fine on his device, and altho he has a custom rom he tells me its not essential, as ive read up on the potential risks I would rather stick with the stock but will change if thats whats causing the problem.
I would really appreciate some suggestions, thanks in advance for your time and help.
Peter

forgot to add, the second result is the screen going blue indefinatly, which I presume from my extensive knowledge.........lol is a blue screen of death

upgrade your radio, im on 2.12.50, and the newest is 2.15.50
also, try a modded windows mobile rom, i use standard energy with no issues.
also, make sure you only have that one android build on your SD card. and that it's a new build, not an ancient one. (check http://android.hd2roms.com/)
you shouldnt have any more issues.

Thanks for the advice, unfortunatly before seeing your post I uprgraded too chuckeys rom, not energy, but get the exact same error... Leads me to beleive the problem is elsewhere. Will keep trying tho hope its worth it.

Jai meme problme mon rom est miri hd2 v_18.0 wwe ? Radio 2.15.50.14 ?

Same problem here, tried to change my wm rom and didn't work. I'm looking tonight if I can find a solution...

A little disclaimer
I will not be for any damage that may be caused to your device, HSPL remove warranty so be carefull. Don't forget to have more than 50% of battery remaining before the process !
So, maybe here is the solution:
I've try again with differents roms, changing my wm rom etc. and nothing works.
But, at the end I've change my radio rom to Leo_RADIO_2.12.50.02_2 found here http://forum.xda-developers.com/showthread.php?t=611787
Then installed Chucky GTX Lite rom found here http://forum.xda-developers.com/showthread.php?t=618787
And to finish I've installed the bootloader and download MDJFroYoRevolution 1.4 with android 2.2
I've use the 512 Data img too (just unzip your MDJFroYoRevolution, take the 512 or 1Go file and put this file on your Android root.) isn't necessary but takes less time to work first time.
After that still not working so I managed to try to remove all files from my sd card (2Go only) and I put on ONLY MDJFroYoRevolution 1.4+512Mo Data img !
Then after 10mn~ it works !
I think the bug is only because sd card haven't enough space to create all files so the HTC logo stuck and no error message appear.
Don't forget to install the bootloader on your memory internal storage! and not the on the sd card!
Good luck everyone and I hope it will help.
ps: sorry for my english hope you understand anything

Having the same problem here. I've tried different versions of WM, different Android builds, updated the latest radio rom, all without success.
Strange thing is though that Android boots the first few times, but after resetting it more than about three times it gets stuck on the black screen with the HTC letters in the middle. The only way to get it running again is reformatting my SD card (8G). Only thing on it is the Mdeejay Froyo Sense v2.3 Clean...

Solution for the freeze screen after second boot
I put android not in the root directory but in a \Android directory on the SD CARD.
of course, I add set cmdline "rel_path=Android" in the Startup.txt file and now i can reboot my phone when i want.

Ghirt said:
Having the same problem here. I've tried different versions of WM, different Android builds, updated the latest radio rom, all without success.
Strange thing is though that Android boots the first few times, but after resetting it more than about three times it gets stuck on the black screen with the HTC letters in the middle. The only way to get it running again is reformatting my SD card (8G). Only thing on it is the Mdeejay Froyo Sense v2.3 Clean...
Click to expand...
Click to collapse
exactly the same issue here
ROM: Energy build 28244
Radio: 2.15.50.14
Android: MDJ FroYo Sense Clean v. 2.4

Having same issue.
Energy Rom
Just reformatted MS
Hspl 2.08
radio 2.15.50.4
htc desire android build
getting same green htc screen.

icemanscion said:
Energy Rom
Just reformatted MS
Hspl 2.08
radio 2.15.50.4
htc desire android build
getting same green htc screen.
Click to expand...
Click to collapse
Do you got this issue at the first boot or after few reboots as Ghirt and I have ?

peterbeer said:
Hi, this is my first post on this forum so first of all I would like to appolagise for all the things I've either just done wrong, or am about too....
I am trying to install android on to my phone, I am on the stock rom but have succsesfully installed HSPL3 and radio version 2.11.50.20.
I have tried a few builds of Android but allways have one of 2 results.
Once I've run clrcad followed by harlet, it tells me I'm booting to linux. The screen then goes black, it runs about 8 lines of code, stops there and changes to a black screen with a green HTC. Where it remains indefinatly.
A friend with anouther HD2 has android working fine on his device, and altho he has a custom rom he tells me its not essential, as ive read up on the potential risks I would rather stick with the stock but will change if thats whats causing the problem.
I would really appreciate some suggestions, thanks in advance for your time and hel
Peter
Click to expand...
Click to collapse
Always use the custom winmo Rom sugested by the Android Builder. Simple as. The myth of "Stock ROM will be sufficient" should end
Peter[/QUOTE]

Same problem!!
Ive updated my radio to: 2.15.50.14
tried 3 roms.
before installing radio - I had the Kernal problem.
and now I have the black screen with green htc.
has anyone found a solution?
is their something that im not doing?
thanks!

jigners said:
Always use the custom winmo Rom sugested by the Android Builder. Simple as. The myth of "Stock ROM will be sufficient" should end
Peter
Click to expand...
Click to collapse
[/QUOTE]
Not true. I've installed on a couple of peoples HD2's using the latest stock WWE rom with radio 2.15. It does work, and it works very well.
I'm not saying you shouldn't use custom roms, that is everyone's prerogative (as you can see from my sig I use VBN's rom and it's perfect for me).

Try to move a folder called Android from sd card to another folder or delete it and it should help. It worked in my case. Good luck!

has someone hear find an answer?

given up
I have tried many combos and radios and still stucked at green htc loading logo now i am just hoping for nand. strange thing its the volume down and end does not bring bootloader anymore.

[Q]no more android builds booting

hi guys i have a very strange problem
after a week that i tried wp7 i decided to go back to wm + andro sd....
i already did other times and everything was going well...
i did task29 to install my usual energy rom...copied back my usual android rom backup...but...
Android dosnt load...its stuck at "htc page" for hours...i tryed different rom...tried the same build of my backup and nothing happens...
now i went back to wp7 and set for dual boot from maglar...always stucked at htc screen...
i really need andro for google maps until wp7 have his version...im going crazy!
anyone ever had the same problem?
i tryed different wm builds before try wp7 dual boot but always the same problem
with a fresh installation of android after 2 hours of wait (i was sleeping hehe) data.img isnt created...tried to put a fresh one from the stock rom but nothing
hoping my english is understandable i say "THANKS" to all for every suggestion

This isnt the questions forum this is the development forum.

uooops! i posted in the wrong tab hehe i have about 15 xda tab open at the same time...can i move this or only admins can?

Try This
xardus said:
hi guys i have a very strange problem
after a week that i tried wp7 i decided to go back to wm + andro sd....
i already did other times and everything was going well...
i did task29 to install my usual energy rom...copied back my usual android rom backup...but...
Android dosnt load...its stuck at "htc page" for hours...i tryed different rom...tried the same build of my backup and nothing happens...
now i went back to wp7 and set for dual boot from maglar...always stucked at htc screen...
i really need andro for google maps until wp7 have his version...im going crazy!
anyone ever had the same problem?
i tryed different wm builds before try wp7 dual boot but always the same problem
with a fresh installation of android after 2 hours of wait (i was sleeping hehe) data.img isnt created...tried to put a fresh one from the stock rom but nothing
hoping my english is understandable i say "THANKS" to all for every suggestion
Click to expand...
Click to collapse
I had the same issue. Try loading an official WM6.5 rom. Dont task29. Then load magldr, then CWM them flash build of choice. you should be fine.
Let me know if it works for you please.

nattyd said:
I had the same issue. Try loading an official WM6.5 rom. Dont task29. Then load magldr, then CWM them flash build of choice. you should be fine.
Let me know if it works for you please.
Click to expand...
Click to collapse
i will try this evening at pc...but im not very practice with short words...cwm stands for?
i have to task29 to go back from wp7 cos with new roms the update tool dsnt connect

CWM = ClockWorkMod

Instructions
xardus said:
i will try this evening at pc...but im not very practice with short words...cwm stands for?
i have to task29 to go back from wp7 cos with new roms the update tool dsnt connect
Click to expand...
Click to collapse
Hope this is helpful.
As Nick.C has pointed out CWM = ClockWorkMod Recovery. Im assuming this is the method you are using to flash your builds.
I did not mean for u not to use task29 at all. Follow the steps below and all should be well.
1. Task29 to remove Windows Phone 7
2. Flash official WM6.5 Build (DO NOT Task29)
3. Download and use SD Formatter 3.0 to format SD Card. Set option to Full Erase and Size adjustment to ON.
4. Install MGLDR 1.13
5. Flash CWM
6. Flash your favorite android build.

just to be sure...after flash official rom...i think i need to hspl before flash maglrd
i know i should read mag installation guide...but...im stuck in highway and im too lazy to find it hehehe

xardus said:
just to be sure...after flash official rom...i think i need to hspl before flash maglrd
i know i should read mag installation guide...but...im stuck in highway and im too lazy to find it hehehe
Click to expand...
Click to collapse
If you have flashed custom roms before, then you already have HSPL installed, because u cant flash custom roms without it. HSPL is always there until you remove it, even if you flash an official or custom rom.
To flash MGLDR - Boot into the boot loader screen (Multi Color Screen) and then flash MGLDR
To flash CWM - Boot into MGLDR and select usb flasher then flash CWM. Some chefs have there own custom CWM so read there instruction so u will know if you will use the original CWM or their version.

sd card block size?

Thread moved to Q&A.

[Q] Help a Noob?

hay folks!
i have a Sony X8 running a modded rom so i'm not a total noob!
but i'm a bit stuck with the HD2!
what is the simplest way for me to get Android on my HD2? (Nand not SD)
info about my HD2
CPU: QUALCOMM(R) 8250B
SPEED: 1024MHz
RAM size: 448 MB
Flash size: 512 MB
Storage size: 181.47 MB
Radio Version: 2.05.51.05_2
(if you guys need any extra info let me know!)
i have read many threads, installed the one click app & bricked my phone (restored it to Stock Rom)
once i have a working Rom Manager & get what updated driver i need i will be fine but i'm stuck getting there
all help is most welcome! i dont want to totally brick my phone trying to get away from this rather disappointing windows OS
Thanks in advance everyone
Subz

Read the sticky posts in all the HD2 Android forums. There are a lot of options, so read until you know enough to decide what you want (there are more options with the HD2 than with normal native Android phones).
Once you know what you want (which bootloader, rom, etc.), read even more until you feel you know what you need to do to get what you want. Then read some more.
All the information you need is right here in the forums, do yourself the favor of reading as much of it as you can, this will avoid a bunch of potential problems, and your next thread being titled something like 'Help pleeeease I bricked it!!!'

huggs said:
and your next thread being titled something like 'Help pleeeease I bricked it!!!'
Click to expand...
Click to collapse
the magdlr option looks fine to me (i saw a old youtube video for MAGDLR1.13) but i don't get how i know what "RADIO" i need? (& the video says if i get this wrong i can Brick the phone) if bricked means "have to restore to stock rom" then that's no problem for me, but i don't want to make the phone "DEAD"
i think i will find the rom i want then ask advice about what to do with "radio" after that time so the question is more informed
Subz

That radio brick warning is for tmous phones only, you are immune to that.
Use 2.15.50 radio.
Hspl4 set 2.08.hspl***
Bootloader
USB
Flash radio 2.15.50***
Bootloader
Usb
Flash magldr
Enter magldr, USB flasher
USB
use nand toolkit to set required system partition size
Enter magldr, 8 ad recovery
This starts cwm
In cwm advanced partition SD card (this will wipe the card so save anything you need)
Put the.zip you want to flash on SD
In cwm 'flash zip from SD - choose zip
Restart,
If it hasn't booted after ten minutes pull battery and restart.
*** don't need to touch these again unless you go back to winmo.

Hi
i updated my radio to 2.15.50.14 & i updated to 2.08hspl
can i install MAGDLR & or CLG & keep the current win boot it has also?
last time i tried with the one click tool my phone just hung at the HTC screen & did nothing at boot, (had to restore to stock)
is it best i chose the rom i want to install & do MAGDLR & install new rom at the same time
i'm still open to advice on the best android rom out (Stable & Latest is my preference)
i like the one click install tool but cant find tutorials that dont assume i know what partition size is best & what to expect from MAGDLR & CLG?
not even sure how to boot in to CLG if i did get it installed
advice on ONE straight talking tutorial would be great
love you guys already
Subz

djsubject said:
Hi
i updated my radio to 2.15.50.14 & i updated to 2.08hspl
can i install MAGDLR & or CLG & keep the current win boot it has also?
Click to expand...
Click to collapse
no, you cant, winmo will be removed.
last time i tried with the one click tool my phone just hung at the HTC screen & did nothing at boot, (had to restore to stock)
Click to expand...
Click to collapse
try the 'NAND toolkit'
is it best i chose the rom i want to install & do MAGDLR & install new rom at the same time
Click to expand...
Click to collapse
you onyl have to install magldr once. you can keep changing roms and partition sizes without reflashing magldr.
i'm still open to advice on the best android rom out (Stable & Latest is my preference)
Click to expand...
Click to collapse
typhoon
i like the one click install tool but cant find tutorials that dont assume i know what partition size is best & what to expect from MAGDLR & CLG?
Click to expand...
Click to collapse
there is no 'best' partition size, , if you dont set one big enough for the rom you chose, it wont boot, , if you set one bigger than teh rom you chose, you waste space.
Each rom will tell you in post 1 what system partition size to set.
not even sure how to boot in to CLG if i did get it installed
Click to expand...
Click to collapse
Now, do you mean CWM or cLK? CWM is for flashing the roms, cLK is an alternative to magldr. do some reading, there's more than one thread that tells you what these all are. My advice would be to stick to magldr and CWM for now. FOrget cLK till you are more experienced.
advice on ONE straight talking tutorial would be great
Click to expand...
Click to collapse
http://forum.xda-developers.com/archive/index.php/t-1021837.html
love you guys already
Subz
Click to expand...
Click to collapse
love is a many splendored thing.
ALso, many tutorials wont mention it as part of the process, but after you have flashed CWM, and before you flash the rom, go into CWM and use 'advanced - partition sd card' (back up anything you dont wanna lose)
this will walk you thru creating an EXT partition on your s card, which acts as internal memory. Doing it now will save you having to do it later and ruin an installed rom.

Thanks for all the help guys!!
i am running android
magdlr & cynogenmod 2.0
all working (but the camera is super crap in this rom)
now i have magdlr i can play with roms
off to investigate typhoon next
i'm sure i will be back at some point asking abut installing CWM (ClockWorkMod?) as this is what i use on my Sony x8
but already with this older Android Rom i have a more useful phone than i had this time yesterday
thanks again for all your help guys!!
off to give some thanks
Subz

[Q] whats the easiest way to install android

Hi, I have the hdc hd2 with spl 3.03.0000 xe, and radio 2.15.161.3.
You maybe able to tell by that that im new to this, but want to install android as i dont like windows 6.5. I've managed to install a stock windows rom with the information i've learned here. But now i need help.
I want to install froyo or gingerbread as ive used these before on other phones.
So what is the easies way to do it and wheres the best place to get the rom from.
Please try to make it as simple as possible, Thanks.

It depends, do you want NAND Android or are you happy with running SD Android? Basically, if you want SD Android it couldn't be simpler. Just go to the SD section, download a build, place the Android folder on the root of your SD card and hit CLRCAD then HARET in the file manager. If you want NAND Android it's still pretty straightforward. Follow this guide and you should be fine. If you find even this guide too complex try using the NAND Toolkit. If you can't use that, don't bother flashing NAND Android and stick with SD Android.

Have you tried using Google? <<< I'm flaming.
Why didn't you look for the Newbies' Guides that are floating everywhere? they will guide you from the moment you pay for your phone till you are welcomed with Android's welcome screen. <<<I'm trying to be nice.
Here you go : http://forum.xda-developers.com/showthread.php?t=893948 , from start to finish. <<< I'm being nice.
Choose wisely ...
EDIT:
It always takes more time to write a poem than it does to write an article
You were faster this time, Nigel
Edit v1.1:
lol, I guess you're right, It's a double win . Furthermore, I just couldn't b.a. to look for a recent guide, I simply made a quick google about guides for hd2-android and this came up, didn't really check it
Next time, I'll be faster ..... and use bigger words

Marvlesz said:
Have you tried using Google? <<< I'm flaming.
Why didn't you look for the Newbies' Guides that are floating everywhere? they will guide you from the moment you pay for your phone till you are welcomed with Android's welcome screen. <<<I'm trying to be nice.
Here you go : http://forum.xda-developers.com/showthread.php?t=893948 , from start to finish. <<< I'm being nice.
Choose wisely ...
EDIT:
It always takes more time to write a poem than it does to write an article
You were faster this time, Nigel
Click to expand...
Click to collapse
Muahahahaha, I win Also, you linked an outdated guide for the DFT Stock desire build, so I double win (if that's possible)

Thanks guys after more reading and searching i think i should go the nand root.
This means i need hspl on it it first and i can only install this if i have spl 1.42.0000. Mine says spl-3.03.0000. It also says installing a stock rom will roll this back. I've installed stock win rom yesterday and it didnt touch the spl.
Can i still install hspl with this or do i need it?
Is there a list of available roms on this site?

tradvang said:
Thanks guys after more reading and searching i think i should go the nand root.
This means i need hspl on it it first and i can only install this if i have spl 1.42.0000. Mine says spl-3.03.0000. It also says installing a stock rom will roll this back. I've installed stock win rom yesterday and it didnt touch the spl.
Can i still install hspl with this or do i need it?
Is there a list of available roms on this site?
Click to expand...
Click to collapse
*sigh* did you read Marvlesz's post about Google? Download HSPL4 and use it to flash HSPL 2.08, no ROM downgrade is necessary. Basically after you've done that it's as simple as flashing MAGLDR, CWM and your ROM (and trust me, all of that won't take you more than 30 minutes at the very most).
Marvlesz said:
Next time, I'll be faster ..... and use bigger words [/B]
Click to expand...
Click to collapse
Lol, just got that part

Thanks again got the hepl bit done, downloading a rom now got MAGLDIR113 down and ready.
Having problem getting phone to sync with vista on pc, it just wont do it. Got it to sync on the laptop ok, any ideas with pc problem? Keep getting rapitool errors.

tradvang said:
Thanks again got the hepl bit done, downloading a rom now got MAGLDIR113 down and ready.
Having problem getting phone to sync with vista on pc, it just wont do it. Got it to sync on the laptop ok, any ideas with pc problem? Keep getting rapitool errors.
Click to expand...
Click to collapse
Check your device manager did u see mobile device? and is it working?
if not try to Reinstall the WMDC driver?
I used to have this problem too after i reinstall the driver the phone will be detected again.
However if u still can't connect the phone to your PC (it's driver problem, i think).
Try task 29 Change to cLK for me it fixed everything. (using HD2 toolkit is easiest way)

Sorry for being a bit dumb here but stuck again.
I've downloaded 4 roms-
danik supersonic v1.0 lite
boxmax.s3.5v8.0.magldr
boxmax.s3.5v8.5.magldr
boxmax.s3.5.v8.5.haret.sd
unzipping the first 3 provide no DAF.exe or install.exe, so stuck there.
unzipped the last and copied to sd card and the phone just stalls on the htc quietly brilliant screen.
What can i try next?

tradvang said:
Sorry for being a bit dumb here but stuck again.
I've downloaded 4 roms-
danik supersonic v1.0 lite
boxmax.s3.5v8.0.magldr
boxmax.s3.5v8.5.magldr
boxmax.s3.5.v8.5.haret.sd
unzipping the first 3 provide no DAF.exe or install.exe, so stuck there.
unzipped the last and copied to sd card and the phone just stalls on the htc quietly brilliant screen.
What can i try next?
Click to expand...
Click to collapse
Which guide did you follow? The one I posted or the one which Marvlesz posted? Use the one I posted because the one he posted is outdated. You install CWM then flash the ROM as a zip file. I really have no clue how somebody can find it so difficult to follow simple instructions: DOWNLOAD A NAND ROM, NOT AN SD ROM. You've said that you want a NAND ROM and then you try to flash an SD build? At least have some common sense, please. Unless you have a problem which cannot be solved by reading in the future I refuse to give any more help, because it appears to be hopeless

thanks again i've learned alot more tonight, got my first flash done just waiting for it to load. Last question before i leave you alone Is there a way to tell the difference between which mods are CWM and which wont work.

tradvang said:
thanks again i've learned alot more tonight, got my first flash done just waiting for it to load. Last question before i leave you alone Is there a way to tell the difference between which mods are CWM and which wont work.
Click to expand...
Click to collapse
Basically all ROMs use CWM, other than the DFT Stock Desire ROM. For everything else, just download the MAGLDR version of the ROM if there is one (many ROMs automate MAGLDR/cLK), change your system partition to the required size and flash the ROM.

hi tried downloading 6 roms now
DFT_LEO_NAND_Android
BoxmaX.S3.5.v.8.5.Magldr
For.user.Nand.v8.x
BoxmaX.S3.5.v.8.5.Haret.SD
BoxmaX.S3.5.v.8.0.Magldr
DFT_LEO_MAGLDR113_DAF
Android_2.3.5_Danik_Supersonic_v.1.0_Lite
Put all of them on the memory card and it only recogognises the Danik one when i go to choose zip from sd card.
When i try to load that it goes through ok till i reboot then it freezes at the HTC screen.

tradvang said:
hi tried downloading 6 roms now
DFT_LEO_NAND_Android
BoxmaX.S3.5.v.8.5.Magldr
For.user.Nand.v8.x
BoxmaX.S3.5.v.8.5.Haret.SD
BoxmaX.S3.5.v.8.0.Magldr
DFT_LEO_MAGLDR113_DAF
Android_2.3.5_Danik_Supersonic_v.1.0_Lite
Put all of them on the memory card and it only recogognises the Danik one when i go to choose zip from sd card.
When i try to load that it goes through ok till i reboot then it freezes at the HTC screen.
Click to expand...
Click to collapse
Screw it, I can't help you if you're this f**king stupid.

Cheers nasty c*nt.

tradvang said:
Cheers nasty c*nt.
Click to expand...
Click to collapse
Is that how you say thanks to those who were trying to help you ?
Follow this : http://forum.xda-developers.com/showpost.php?p=16528026&postcount=7 شبر بـ شبر and you should have Android by the end of its steps.
(btw, post reported)

I've said thanks before for his help. Ive asked for the difference between mods and how to differenciate them, i cant work out out why only 1 out of 6 is recognised. And i've downloaded the magdlr versions as suggested.
Then he calls me f*cking stupid. Think i have every right to be p*ssed off.

What do you mean by "Difference between mods" ? All mods come in a .zip package that is flashed in CWM.
When you download something (any mod, rom, kernel or anything) off the NAND section (this : http://forum.xda-developers.com/forumdisplay.php?f=928 ) it is going to be a flashable CWM. (Unless noted)
But when you download something off the SD section ( this: http://forum.xda-developers.com/forumdisplay.php?f=735) it is going to be ... well ... to be put on the sd without flashing.
Is this what you are asking for ?

Nigeldg said:
Which guide did you follow? The one I posted or the one which Marvlesz posted? Use the one I posted because the one he posted is outdated. You install CWM then flash the ROM as a zip file. I really have no clue how somebody can find it so difficult to follow simple instructions: DOWNLOAD A NAND ROM, NOT AN SD ROM. You've said that you want a NAND ROM and then you try to flash an SD build? At least have some common sense, please. Unless you have a problem which cannot be solved by reading in the future I refuse to give any more help, because it appears to be hopeless
Click to expand...
Click to collapse
tradvang said:
I've said thanks before for his help. Ive asked for the difference between mods and how to differenciate them, i cant work out out why only 1 out of 6 is recognised. And i've downloaded the magdlr versions as suggested.
Then he calls me f*cking stupid. Think i have every right to be p*ssed off.
Click to expand...
Click to collapse
Sorry, but I have every right to call you stupid too. I even posted DOWNLOAD A NAND ROM, and you go on and download ROMs from the SD section? It's frankly pathetic if you can't do that little reading, and if I were you I wouldn't bother flashing anything in the future. You're lucky you have a pretty much unbrickable device, because if you didn't I'm sure you would be sitting right there with a useless piece of hardware right now.

Thanks Marvlesz, thats got me sorted, the problem was when he said just download the "MAGLDR version", i thought anything with that in the name was the correct one. I'm not here to get into a slanging game so i'll just leave it that.
Thanks again.

[Q] need help:Move from Gingerbread 2.3.5 SD to MIUI

Hi,
I have Gingerbread 2.3.5 (Nexus) as the only Operation System on my HD2. It crashes when I use some application e.g. Scan my SD card for medias, using a music player. Now I want to switch to a better ROM like MIUI (that's what I've heard). How can I do that?
Please consider that:
- I'm beginner
- I have only Android (No Windows)
- I have HSLP v 3.* (A version of MIUI which I downloaded and tried to install, only support HSPL v 2.* or bellow)
I will appreciate any kinds of help.
Thanks,
Mas

what loader do you have?
anyways check out the link below & give them a good read, it might help

mengfei said:
what loader do you have?
anyways check out the link below & give them a good read, it might help
Click to expand...
Click to collapse
If I'm not mistaken, this is the bootloader and other info which I have:
LEO100 HX-BC SHIP S-OFF
HBOOT-1.5.0.1
SPL 3.03
RADIO-2.15.50.14
And bytheway, it seems that I made a mistake in my subject. In the bootloader menu it says "NAND Android"

sallaneh said:
If I'm not mistaken, this is the bootloader and other info which I have:
LEO100 HX-BC SHIP S-OFF
HBOOT-1.5.0.1
SPL 3.03
RADIO-2.15.50.14
And bytheway, it seems that I made a mistake in my subject. In the bootloader menu it says "NAND Android"
Click to expand...
Click to collapse
Either I'm new, or that phone's details look weird.
Where did you get it from? And if you're a beginner, how did you manage to get Android on it?

Marvlesz said:
Either I'm new, or that phone's details look weird.
Where did you get it from? And if you're a beginner, how did you manage to get Android on it?
Click to expand...
Click to collapse
Well! I asked (and paid) someone to install it for me
I'm thinking about re-installing a Windows and then install an android on my SD card if I don't have any other options.

You've been given a fake I think. The HD2 doesn't have HBOOT or S-ON/OFF in the bootloader.

Nigeldg said:
You've been given a fake I think. The HD2 doesn't have HBOOT or S-ON/OFF in the bootloader.
Click to expand...
Click to collapse
What do you mean by fake? It is working (the phone and OS) and in the software info it is written Android 2.3.5

sallaneh said:
What do you mean by fake? It is working (the phone and OS) and in the software info it is written Android 2.3.5
Click to expand...
Click to collapse
Doesn't mean that it's an HD2.

sallaneh said:
What do you mean by fake? It is working (the phone and OS) and in the software info it is written Android 2.3.5
Click to expand...
Click to collapse
you can get one here as low as $100 New
http://s.taobao.com/search?q=HTC+HD...rceId=tb.index&spm=1.1000386.5803581.d4908513

haha. Well I got it as a brand new phone some times ago by myself and was using Windows phone but recently asked from someone to install Andorid on it so it is not a fake.
I wonder to know if there is a way to return my windows phone back and then install an Android on its SD card.

sallaneh said:
haha. Well I got it as a brand new phone some times ago by myself and was using Windows phone but recently asked from someone to install Andorid on it so it is not a fake.
I wonder to know if there is a way to return my windows phone back and then install an Android on its SD card.
Click to expand...
Click to collapse
Could you upload pictures of the screens where u see that stuff?
And to return to winmo 6.5,
1. downlad the rom from htc.com
2. boot into the bootloader ( to do this, turn off the phone, turn it on while holding the volume down and power key until u boot into the bootloader )
3. Connect your phone to the pc using the usb
4. The 'serial' word should change to 'usb', at this point, just run the rom.
All this is assuming you have a HD2.

adil1508 said:
Could you upload pictures of the screens where u see that stuff?
And to return to winmo 6.5,
1. downlad the rom from htc.com
2. boot into the bootloader ( to do this, turn off the phone, turn it on while holding the volume down and power key until u boot into the bootloader )
3. Connect your phone to the pc using the usb
4. The 'serial' word should change to 'usb', at this point, just run the rom.
All this is assuming you have a HD2.
Click to expand...
Click to collapse
Thanks for your reply and assumption!
I have a question though, do I need to do task29 first then do your 1-4 steps?
I won't face any problem due to the version of my SPL etc?
Regards

sallaneh said:
Thanks for your reply and assumption!
I have a question though, do I need to do task29 first then do your 1-4 steps?
I won't face any problem due to the version of my SPL etc?
Regards
Click to expand...
Click to collapse
Hi, I would use task29, as it wipes the internal memory clean. Do note that some people have bad blocks ( a bit of corrupted memory ) after using task29. But i have used it alot and never faced this issue, If u havnt done it before, no harm it using it.

adil1508 said:
Hi, I would use task29, as it wipes the internal memory clean. Do note that some people have bad blocks ( a bit of corrupted memory ) after using task29. But i have used it alot and never faced this issue, If u havnt done it before, no harm it using it.
Click to expand...
Click to collapse
tnx.
I will try task29 and lets see what will happen.
As you can see in the title, I have a NAND Gingerbread 2.3.5 (Nexus) and I'm not very happy with it so I want to recover my winmo 6.5 and then install another rom of Androdi on my SD. Am I in the right path?
- task29
- put the stock rom on my SD
- reboot and install the winmo 6.5
regards,
Masood

its basically task29, then u boot into the bootloader, ( because the internal memory is wiped, nothing else u can boot into ), then u connect the phone to the pc using the usb, then just run the rom u downloaded, its an executable. If it reads the phone ( which it will ) it will automatically install winmo 6.5
And just to inform you, u have a really really old rom. After winmo 6.5, i suggest u install one of the latest gingerbread roms. I use Typhoon's rom, its really fast and smooth and bugfree. PERFECT for everyday use

adil1508 said:
its basically task29, then u boot into the bootloader, ( because the internal memory is wiped, nothing else u can boot into ), then u connect the phone to the pc using the usb, then just run the rom u downloaded, its an executable. If it reads the phone ( which it will ) it will automatically install winmo 6.5
And just to inform you, u have a really really old rom. After winmo 6.5, i suggest u install one of the latest gingerbread roms. I use Typhoon's rom, its really fast and smooth and bugfree. PERFECT for everyday use
Click to expand...
Click to collapse
How can I move to Typhoon Rom then? Do I need to remove everything?
As you might remember, I have a Nexus 2.3.5 NAND on my HD2.
Regards

sallaneh said:
How can I move to Typhoon Rom then? Do I need to remove everything?
As you might remember, I have a Nexus 2.3.5 NAND on my HD2.
Regards
Click to expand...
Click to collapse
Alright. U have android 2.3.5. Thats really old. You will have to answer some questions,
1) Do you have clockworkmod recovery( CWR ) installed?
2) Did u flash the rom yourself? Are you familiar with the whole flashing process?
I'm guessing you already have MAGLDR bootloader installed. And you dont need to remove everything. You will be adding a few things, thats all.
Btw, you will have to make backups of everything you need. Eg, stuff on your sd card, pics and all. And your SD card WILL BE WIPED CLEAN.
I JUST READ YOUR OLD POST. lol sorry
If you have MAGLDR installed, Which probably is, you dont need task29. Its quite simple from there actually

adil1508 said:
its basically task29, then u boot into the bootloader, ( because the internal memory is wiped, nothing else u can boot into ), then u connect the phone to the pc using the usb, then just run the rom u downloaded, its an executable. If it reads the phone ( which it will ) it will automatically install winmo 6.5
And just to inform you, u have a really really old rom. After winmo 6.5, i suggest u install one of the latest gingerbread roms. I use Typhoon's rom, its really fast and smooth and bugfree. PERFECT for everyday use
Click to expand...
Click to collapse
adil1508 said:
Alright. U have android 2.3.5. Thats really old. You will have to answer some questions,
1) Do you have clockworkmod recovery( CWR ) installed?
2) Did u flash the rom yourself? Are you familiar with the whole flashing process?
I'm guessing you already have MAGLDR bootloader installed. And you dont need to remove everything. You will be adding a few things, thats all.
Btw, you will have to make backups of everything you need. Eg, stuff on your sd card, pics and all. And your SD card WILL BE WIPED CLEAN.
I JUST READ YOUR OLD POST. lol sorry
If you have MAGLDR installed, Which probably is, you dont need task29. Its quite simple from there actually
Click to expand...
Click to collapse
I will check these parameters as soon as I get home!

sallaneh said:
I will check these parameters as soon as I get home!
Click to expand...
Click to collapse
Good,
Btw, here is the rom link. Download it. Its neccassay regardless of what answers you provide
http://forum.xda-developers.com/showthread.php?t=933951