Related
Hi, this is my first post on this forum so first of all I would like to appolagise for all the things I've either just done wrong, or am about too....
I am trying to install android on to my phone, I am on the stock rom but have succsesfully installed HSPL3 and radio version 2.11.50.20.
I have tried a few builds of Android but allways have one of 2 results.
Once I've run clrcad followed by harlet, it tells me I'm booting to linux. The screen then goes black, it runs about 8 lines of code, stops there and changes to a black screen with a green HTC. Where it remains indefinatly.
A friend with anouther HD2 has android working fine on his device, and altho he has a custom rom he tells me its not essential, as ive read up on the potential risks I would rather stick with the stock but will change if thats whats causing the problem.
I would really appreciate some suggestions, thanks in advance for your time and help.
Peter
forgot to add, the second result is the screen going blue indefinatly, which I presume from my extensive knowledge.........lol is a blue screen of death
upgrade your radio, im on 2.12.50, and the newest is 2.15.50
also, try a modded windows mobile rom, i use standard energy with no issues.
also, make sure you only have that one android build on your SD card. and that it's a new build, not an ancient one. (check http://android.hd2roms.com/)
you shouldnt have any more issues.
Thanks for the advice, unfortunatly before seeing your post I uprgraded too chuckeys rom, not energy, but get the exact same error... Leads me to beleive the problem is elsewhere. Will keep trying tho hope its worth it.
Jai meme problme mon rom est miri hd2 v_18.0 wwe ? Radio 2.15.50.14 ?
Same problem here, tried to change my wm rom and didn't work. I'm looking tonight if I can find a solution...
A little disclaimer
I will not be for any damage that may be caused to your device, HSPL remove warranty so be carefull. Don't forget to have more than 50% of battery remaining before the process !
So, maybe here is the solution:
I've try again with differents roms, changing my wm rom etc. and nothing works.
But, at the end I've change my radio rom to Leo_RADIO_2.12.50.02_2 found here http://forum.xda-developers.com/showthread.php?t=611787
Then installed Chucky GTX Lite rom found here http://forum.xda-developers.com/showthread.php?t=618787
And to finish I've installed the bootloader and download MDJFroYoRevolution 1.4 with android 2.2
I've use the 512 Data img too (just unzip your MDJFroYoRevolution, take the 512 or 1Go file and put this file on your Android root.) isn't necessary but takes less time to work first time.
After that still not working so I managed to try to remove all files from my sd card (2Go only) and I put on ONLY MDJFroYoRevolution 1.4+512Mo Data img !
Then after 10mn~ it works !
I think the bug is only because sd card haven't enough space to create all files so the HTC logo stuck and no error message appear.
Don't forget to install the bootloader on your memory internal storage! and not the on the sd card!
Good luck everyone and I hope it will help.
ps: sorry for my english hope you understand anything
Having the same problem here. I've tried different versions of WM, different Android builds, updated the latest radio rom, all without success.
Strange thing is though that Android boots the first few times, but after resetting it more than about three times it gets stuck on the black screen with the HTC letters in the middle. The only way to get it running again is reformatting my SD card (8G). Only thing on it is the Mdeejay Froyo Sense v2.3 Clean...
Solution for the freeze screen after second boot
I put android not in the root directory but in a \Android directory on the SD CARD.
of course, I add set cmdline "rel_path=Android" in the Startup.txt file and now i can reboot my phone when i want.
Ghirt said:
Having the same problem here. I've tried different versions of WM, different Android builds, updated the latest radio rom, all without success.
Strange thing is though that Android boots the first few times, but after resetting it more than about three times it gets stuck on the black screen with the HTC letters in the middle. The only way to get it running again is reformatting my SD card (8G). Only thing on it is the Mdeejay Froyo Sense v2.3 Clean...
Click to expand...
Click to collapse
exactly the same issue here
ROM: Energy build 28244
Radio: 2.15.50.14
Android: MDJ FroYo Sense Clean v. 2.4
Having same issue.
Energy Rom
Just reformatted MS
Hspl 2.08
radio 2.15.50.4
htc desire android build
getting same green htc screen.
icemanscion said:
Energy Rom
Just reformatted MS
Hspl 2.08
radio 2.15.50.4
htc desire android build
getting same green htc screen.
Click to expand...
Click to collapse
Do you got this issue at the first boot or after few reboots as Ghirt and I have ?
peterbeer said:
Hi, this is my first post on this forum so first of all I would like to appolagise for all the things I've either just done wrong, or am about too....
I am trying to install android on to my phone, I am on the stock rom but have succsesfully installed HSPL3 and radio version 2.11.50.20.
I have tried a few builds of Android but allways have one of 2 results.
Once I've run clrcad followed by harlet, it tells me I'm booting to linux. The screen then goes black, it runs about 8 lines of code, stops there and changes to a black screen with a green HTC. Where it remains indefinatly.
A friend with anouther HD2 has android working fine on his device, and altho he has a custom rom he tells me its not essential, as ive read up on the potential risks I would rather stick with the stock but will change if thats whats causing the problem.
I would really appreciate some suggestions, thanks in advance for your time and hel
Peter
Click to expand...
Click to collapse
Always use the custom winmo Rom sugested by the Android Builder. Simple as. The myth of "Stock ROM will be sufficient" should end
Peter[/QUOTE]
Same problem!!
Ive updated my radio to: 2.15.50.14
tried 3 roms.
before installing radio - I had the Kernal problem.
and now I have the black screen with green htc.
has anyone found a solution?
is their something that im not doing?
thanks!
jigners said:
Always use the custom winmo Rom sugested by the Android Builder. Simple as. The myth of "Stock ROM will be sufficient" should end
Peter
Click to expand...
Click to collapse
[/QUOTE]
Not true. I've installed on a couple of peoples HD2's using the latest stock WWE rom with radio 2.15. It does work, and it works very well.
I'm not saying you shouldn't use custom roms, that is everyone's prerogative (as you can see from my sig I use VBN's rom and it's perfect for me).
Try to move a folder called Android from sd card to another folder or delete it and it should help. It worked in my case. Good luck!
has someone hear find an answer?
given up
I have tried many combos and radios and still stucked at green htc loading logo now i am just hoping for nand. strange thing its the volume down and end does not bring bootloader anymore.
I flash the phone with all the ROM's here and I have the same result. Rebooting continuously and after 10 times I got this screen (see Attached)
Anyone know what is wrong I try 3 different cards with different sizes and nothing I got the same every time. Is getting annoying because on the other phone everything go smooth.
testing MAGLDR v1.13
Wow, looks serious, i'm sorry i can't help though, but maybe you should post this on the magldr and wp7 thread. Also, did this happen to you on Android too?
Derek0228 said:
Wow, looks serious, i'm sorry i can't help though, but maybe you should post this on the magldr and wp7 thread. Also, did this happen to you on Android too?
Click to expand...
Click to collapse
Is doing this only with WP7 I will try MAGLDR v1.13 to see what could be.
Same thing with MAGLDR v1.13 I don't know maybe is the phone I even try with different Radios and still the same.
you installed wp7 then reinstall CWM, thats what happened. try flashing wp7 again.
Download New Wp7 package .... always run extratc the WP7 rar package ...and run exe ..
Next time post your questions in the correct forum please.
Still there are issues
I tried flashing hd2 with MAGLDR v 1.13 and android.
Still i see the same error
robinsonmenezes said:
I tried flashing hd2 with MAGLDR v 1.13 and android.
Still i see the same error
Click to expand...
Click to collapse
I'd run a task29 and start from scratch.
I could use a little help here
OKAY GUY'S I HAVE WINDOWS 7 COMPUTER I HAVE ZUNE AND WINDOWS TOOLS FOR MY PHONE BUT THE THING IS I WHEN I GO TO UPGRADE MY ROM WIN RAR STARTS LIKE IT'S ABOUT UPGRADE BUT IT JUST GO AWAY CAN SOMEONE PLEASE POINT ME IN THE WAY OF AN FIX TOWARD THIS.
bigboy38 said:
OKAY GUY'S I HAVE WINDOWS 7 COMPUTER I HAVE ZUNE AND WINDOWS TOOLS FOR MY PHONE BUT THE THING IS I WHEN I GO TO UPGRADE MY ROM WIN RAR STARTS LIKE IT'S ABOUT UPGRADE BUT IT JUST GO AWAY CAN SOMEONE PLEASE POINT ME IN THE WAY OF AN FIX TOWARD THIS.
Click to expand...
Click to collapse
I've read your post for three times now and still dont know what you are talking about.
could you please be more specific about your problem? and maybe withouth CAPSLOCK?
Oh and I think its the wrong thread,too?
georo said:
I flash the phone with all the ROM's here and I have the same result. Rebooting continuously and after 10 times I got this screen (see Attached)
Anyone know what is wrong I try 3 different cards with different sizes and nothing I got the same every time. Is getting annoying because on the other phone everything go smooth.
Click to expand...
Click to collapse
i can't be sure what the reason for this is,but you could always install the official nbh to remove magldr and hspl. then, try again from scratch. that's what i would do. also, the only spl magldr would work for me is 2.08. but then again, you have a tmous hd2..... from what i've seen the hd2 roms don't use the whole 1024 nand, but just half of it(like normal leos) anyway - i don't know if it has anything to do with your problem, but i suggest you start over from scratch, just to be sure....
Thank you guy for all the suggestions but I give up and I install WM6.5 and Android back. I tried all the possibilities and still same thing.
I am still thinking is something which WP7 don't like on this phone. Thank you for all your support.
okay sorry for the caps but i have new computer with widows 7 on it .now zune sees my phone when connect it but when i try to change the radio on it it doesnt find my phone iam i missing a driver are soething it start like its about upgrade my radio but then it just goes away without an error i use win rar file too change radios and rom but now it just dont work i hope i explained it a liittle better thanks for the help.
Have you tried different radios??
bigboy38 said:
okay sorry for the caps but i have new computer with widows 7 on it .now zune sees my phone when connect it but when i try to change the radio on it it doesnt find my phone iam i missing a driver are soething it start like its about upgrade my radio but then it just goes away without an error i use win rar file too change radios and rom but now it just dont work i hope i explained it a liittle better thanks for the help.
Click to expand...
Click to collapse
thats better, but still not perfect. you say, you changed your radios and roms already, but now it doesnt work anymore?
Try another USB-port.
And I hope you know, that to change radios, you dont need to enter the USB-Flasher-mode of magldr. to change the radiorom, you still need to enter the bootloader-mode by pressing the volume-down-button and power while phone is off.
Its as simple as that:
when executing a DAF.exe: use usb-flashermode of magldr.
when executing ROMUpdateUtility.exe: use bootloader.
and what do you mean by winrar-file?
you need to extract the radio first with winrar before you use it.
its win rar thats not working .
mideel said:
thats better, but still not perfect. you say, you changed your radios and roms already, but now it doesnt work anymore?
Try another USB-port.
And I hope you know, that to change radios, you dont need to enter the USB-Flasher-mode of magldr. to change the radiorom, you still need to enter the bootloader-mode by pressing the volume-down-button and power while phone is off.
Its as simple as that:
when executing a DAF.exe: use usb-flashermode of magldr.
when executing ROMUpdateUtility.exe: use bootloader.
and what do you mean by winrar-file?
you need to extract the radio first with winrar before you use it.
Click to expand...
Click to collapse
i start too extract the radio and it goes away is there a driver are something i missing i never had this problem
Hi every one. I had a problems with HD2, my original ROM was with a lot of problems, it restarted without no reason and so on. My colleage suugested to flash with another ROM, so I tride to flash a new ROM, did a Hardspl2 and now my HD is bricked, with triangle and no ROM also shiped (donwloaded from HTC web page by serial) is not working. Anybody help me? I tried lot of ROMs and no luck at least .... Triad also flash with original ROM via Micro SD no luck... Please help me!!!! URGENT!
prieditis said:
Hi every one. I had a problems with HD2, my original room was with a lot of problems, it restarted without no reason and so on. My colleage suugested to flash with another room, so I tride to flash a new room, did a Hardspl2 and now my HD is bricked, with triangle and no room also shiped (donwloaded from HTC web page by serial) is not working. Anybody help me? I tried lot of rooms and no luck at least .... Triad also flash with original room via Micro SD no luck... Please help me!!!! URGENT!
Click to expand...
Click to collapse
Firstly its "ROM" not "room".
What do you mean "with triangle" ??
Which HD2 do you have and which ROM did you try flashing?
Can you get into tri-color bootloader mode?
Sorry i post my thread quickly. Yes i tried to flash a ROM, i have HD2 512MB. I tried to flash a 3.14.405 rom. triangle - i can get in tri-color bootloader mode, but when i try also flash original rom there is no result, it crashes on 9 or 17%. Triangle is a sign when i switch on a device, i believe it means ther eis no windows/rom on device
prieditis said:
Sorry i post my thread quickly. Yes i tried to flash a ROM, i have HD2 512MB. I tried to flash a 3.14.405 rom. triangle - i can get in tri-color bootloader mode, but when i try also flash original rom there is no result, it crashes on 9 or 17%. Triangle is a sign when i switch on a device, i believe it means ther eis no windows/rom on device
Click to expand...
Click to collapse
your device is not bricked... get into bootloader and do a task 29 (LOOK IT UP)...
Then start from scratch... Magldr, then whatever ROM you want.
Can you explain me? Please step by step... Thanks in advance
prieditis said:
Can you explain me? Please step by step... Thanks in advance
Click to expand...
Click to collapse
you need to take a leap and search for it... Here is something on youtube i found.
http://www.youtube.com/watch?v=DtTDuc4V4cU
EVERYTHING you need is on XDA if you look for it...
prieditis said:
, my original room was with a lot of problems, it restarted without no reason and so on. ..with triangle and no room aURGENT!
Click to expand...
Click to collapse
... OK, no room = homeless!
If you can't pay rent, I'm afraid I'll have to ask you vacate the area.
Possible fix stuck bricked hd2 radio no rsa information
Please read the whole post first sorry about the mess it is my first post thanks to everyone here on xda who came up with everything i used to do this There is guides for this xda has a lovely list of tmous roms if you are on t mobile in the us http://www.xdafil.es/index.php?path=HD2/TMOUS/
i would start with the RUU_Leo_1_5_TMOUS_2.02.531.MASD_S__Radio_Signed_15.29.50.07U_2.06.50.04_TeleNav-5.5.42.zip
extract the .exe file if it has one than extract the RUU_signed.nbh from the .exe file using win war or 7 zip than rename it to LEOIMG.nbh and place it on a newly formatted microsd not a microsdhc and i had problems with anything over class 4
place it in your phone and hold the volume down button and power button as loading comes up let off volume down power button will start the flash(i was only able to do complete flashes in the freezer if not it would hang or get radio errors)
i also had a tmous which did not want to flash the radio i would get an an error and rsa fail it sounds crazy but i wrapped it in plastic and stuck it in the freezer for a while before and during the flash this was the only way i could install the radio and actually see rgd information on boot screen after this first one you will have an old test rom with an old spl you cannot change to hspl from here i also was not able to go straight to 2.10, i had to step up from RUU_Leo_1_5_TMOUS_2.03.531.6_Radio_Signed_15.30.50.07U_2.06.50.23_3_Test.zip, to RUU_Leo_1_5_TMOUS_2.03.531.6_Radio_Signed_15.30.50.07U_2.06.50.23_3_Test.zip the same way i did the first one,hard resetting after each one and let it open windows completely to know it is working. than i believe there is an hspl3 file somewhere out there with all thanks to DarkForces Team HardSPL3 by bepe and Cotulla i will try to attach it that will work with spl 2.02 wich you should now be on now you can download your radio in the master radio thread http://forum.xda-developers.com/showthread.php?t=611787
i also just renamed the ruu_signed.nbh to LEOIMG.nbh and ran through sd i seem to have problems through usb and i was trying to be careful with the radio
once you got the radio you want you could flash the rom preferably running task 29 before or get yourself magldr to install through nand i also stuck my laptop an the freezer with the phone to get wp7 completely installed i did all this mess with a phone that had a broken screen i think there is like thermal compound over the processor to the case that is not on right and overheats when not in the operating system like a crappy old laptop with its fans full of stuff trying to install xp. and while a stock rom was being installed the usb was pulled during the radio installation i hope this helps i belive i saw one post to stick it in the freezer out of everything that i think helped the most.i also notice i have to put it in the freezer at boot too sometimes or i will get a fatal hit error i think its just over heating..... i also have an hd2 which has never been opened before that i have never had to stick in the freezer it gets flashed quite abit right now running gingerbread on normal hd2 and wp7 dual boot android 2.2 on the one i had to freeze i hope this helps i was here for weeks reading reading i was stumped cus my first hd2 and g1 were so eazy i will update this post once i stop being lazy and open the phone again to replace the goop to see if that is the problem
Thank you for reading my jumble and thanks again to all you phone heads here on xda which without you none of this would be possible and i would not have wp7 and gingerbread on my hd2 : D
I did a task29, flash a ROM succesfully, but now it' s stucked in HTC loading mode (Shows a HTC and nothing happens)
prieditis said:
I did a task29, flash a ROM succesfully, but now it' s stucked in HTC loading mode (Shows a HTC and nothing happens)
Click to expand...
Click to collapse
succesfull only one time, now i tried reflash an original rom once again and no results, still stucked in triangle. It's a first time when something like this happens
P.S. Sorry for my english..
spyderman33 said:
you need to take a leap and search for it... Here is something on youtube i found.
http://www.youtube.com/watch?v=DtTDuc4V4cU
EVERYTHING you need is on XDA if you look for it...
Click to expand...
Click to collapse
no luck at all I tried it once and have succesfull rom update, but it stucks when started with HTC logo, i tried second time and still no luck. Please help me.. all the time now also for original rom it says that this room is not for that device
original rom
you have to find the original rom shipped with your phone like here i am tmobile usa roms you have to find your carrier and country and start with one of the first ones i started with my second one RUU_Leo_1_5_TMOUS_2.02.531.MASD_S__Radio_Signed_15.29.50.07U_2.06.50.04_TeleNav-5.5.42.zip and i kept getting stuck screens when it was hot turn it off maby find some silica gel (lil rocks that come with everything to absorb water) wrap it in plastic and throw it in the freezer does the back of the phone get real hot during flash
i have shipped original rom, still no luck
not the newest one
you need one of the first test roms this was the only way i got mine to work i had to go from 2.02 to 2.03 to 2.05 hard resetting after each install making sure they completely went in what carrier are you and where are you
Still stuck?
Download HSPL 3.zip from page 1,
Run the program;
a) select 2.08.000 (not HSPL) and you can flash stock (HTC) ROM with no damage or aftermarket changes on your phone.
b) select 2.08.HSPL and you can flash whatever you want
Install MAGLDR 1.13
Flash ROM
Make sure you follow the instructions EXACTLY. You can find these all over XDA, look at all of my posts if you need to.
stepthehen said:
Download HSPL 3.zip from page 1,
Run the program;
a) select 2.08.000 (not HSPL) and you can flash stock (HTC) ROM with no damage or aftermarket changes on your phone.
b) select 2.08.HSPL and you can flash whatever you want
Install MAGLDR 1.13
Flash ROM
Make sure you follow the instructions EXACTLY. You can find these all over XDA, look at all of my posts if you need to.
Click to expand...
Click to collapse
Hi, thanks a lot. Only, SPL for original rom was 1.42000 is it ok to flash with 2.08.000 ? And why i should install MAGLDR 1.3 ? Thanks in advance,
Ok, now i dont understand anything. My original SPL was 1.42, i did Hardspl 3, after that tried flash original rom, process stuck on 96%, after that i tried once again stuck on 9% and says rom not compatible with device. And its like a hidden circle, my phone is acting like that all the time. I tried task29, tried all HSPL, also 1.4200, 1.66 and so on. Can anybody help me? my skype nick is martins.prieditis , maybe someone can assist me?
Ok now its fixed. I did a HSPL4, due to which original rom freeze on 0%, but 3.14 didnt start up on loading OS (white screen with HTC logo))or freeze on 99%. Than went back to shipped 1.42, stock room succesfylly flashed and did a SSPL_RUU. Now the only problem is that my LEO restarts when it gets hot. Any ideas how to fix it?
Thanks all for youre help (regarding my previous issue) !
Overheating??
As mrpoe stated in post 9, One of his phone had to be put in the freezer to be able to flash anything otherwise it will get hot and freeze.
Also the motherboard is most likely broken and you cannot get it to work without freezing or it will keep rebooting...
The best thing to do if you still have warranty is to Keep stock SPL and stock WM6.5 and return for warranty.
It will not function the same again.
I've tried to install magdlr 1.10 1.11 1.12 and 1.13, but none of them will install on to mu HD2. I can get so far as to the screen where it SHOULD be downloading, but it won't go past 0% can anyone tell me what I'n doing wrong?
What Windows version are you running?
Have you tried this thread.....http://forum.xda-developers.com/showthread.php?t=893948
lozonw said:
If you are using Windows Vista or 7, you need to right click DAF and run as admin.
Click to expand...
Click to collapse
Tried that originally; wasn't the problem.
Sorry, not DAF.exe.
It's ROMUpdateUtility.exe.
Try that.
I'm very new to this, though not the flashing of ROMS.
This may help someone as green as me...
After a few hours of staring at a black screen with some very tiny text at the top I decided to update my radio. I had a stock ROM on the HD2 so the radio version was about 2.08, I think.
Having flashed Radio 2.15.50.14 I more or less instanly had a loading screen with a nice animated Andriod, and a few minutes later was booted into Andriod.
So, make sure your Radio is fairly up to date!
yep, thats instruction 2 in pretty much all the 'how to' threads, right after '1 apply HSPL'. But finding it out the hard way will make you remember it, hehe.
Hah! I was dead tired when I posted last night and this is in the wrong thread :-(
I'll now try and put it where it belongs...
Soz
Hi!
The touchscreen of my phone almost doesn't work. I've read many topics about this in different forums and maybe a solution would be to reinstall all from 0 (resetting the phone with that yellow button when you revome the back doesn't work anymore).
So, I want to try to install android hoping this will solve the problem. If not, my phone will be a thin brick in a drawer.
Since the touchscreen is not working correctly, I can't go to see the details in the menu.
The phone was flashed once and currently has a rom called BSB beast 6 and when I turn it on, this red numbers appears:
2.10.50.26
15.39.50.07u
2.11.86834 8g
Current OS is Windows Mobile 6.5
I believe android will work with the current rom without the need of installing another one before, right?
Would recommend me one rom (android NAND) to put? because I saw a lot in thread here and I don't really understand what the differences would be. I just want the phone to work
I hope this is enough information
Thanks a lot!
If you want to flash Android what you need to do is...
Make sure you have 2.08.HSPL (I'm assuming you do as you have a custom ROM).
Then flash the newest radio (2.15.50.14)
Flash MAGLDR
Flash a NAND ROM of your choice.
Though I doubt that will fix the problem. Your digitizer is probably gradually dieing. You can easily get it fixed for about $80.
alc112 said:
Hi!
The touchscreen of my phone almost doesn't work. I've read many topics about this in different forums and maybe a solution would be to reinstall all from 0 (resetting the phone with that yellow button when you revome the back doesn't work anymore).
So, I want to try to install android hoping this will solve the problem. If not, my phone will be a thin brick in a drawer.
Since the touchscreen is not working correctly, I can't go to see the details in the menu.
The phone was flashed once and currently has a rom called BSB beast 6 and when I turn it on, this red numbers appears:
2.10.50.26
15.39.50.07u
2.11.86834 8g
Current OS is Windows Mobile 6.5
I believe android will work with the current rom without the need of installing another one before, right?
Would recommend me one rom (android NAND) to put? because I saw a lot in thread here and I don't really understand what the differences would be. I just want the phone to work
I hope this is enough information
Thanks a lot!
Click to expand...
Click to collapse
Read this:
http://forum.xda-developers.com/showpost.php?p=12105680&postcount=1