Database Users

O2- XDAIIi upgrade

Guy,
Please Help
I was upgrading my XDAIIi to Xda IIi ROM v 1.11.162. during which it show an error message and it just went blank looking closely at the screen showing USB at the top of the screen and the bottom of it has v1.01,
when put on the cradle it showing USB.
I have press the reset botton God knows how many times
Please help someone

Were you trying to upgrade to the rom I posted? With RADIO 1.03 in the filename?
You need to press the power, d-button down and the reset button all together.
Then run the update program again. If it is the original O2 rom then it should work fine from there. If it is the rom I posted then the update will fail initially, just run the program a second time without touching your phone at all.
Hope this helps.

No, I am upgrading from O2 website. I am sorry it not connecting to my pc at all. No sign of life ,
it only display USB on the screen

Try doing a hard reset by holding the power button down and pressing the reset button.
Put it into bootloader by pressing the power, d-button down and the reset button all together and releasing them at the same time. The screen should say SERIAL. Connect it to your PC and the screen should then say USB. Then you should be able to run the update.
If this doesn't work as a last resort try taking the battery out for a while to let the backup run down and start again. Whatever happens the phone needs to go into bootloader mode and a rom applied to get it working again.

Please, which is the D-botton you are refering to

The D button is the "Directional" button, in between the green pickup phone button and the red hang up button.

Restoring to Original Stock ROM

Hey everyone,
Just recently I flashed my HD2 with WP7, after playing around with it for a while, because of its limitations I want to restore it to the original WinMO 6.5 ROM, I got it from the HTC website and when I run it it says connect with USB and use activesync, as you may know this isnt possible because WP7 uses Zune, can you please help me out here.
Thanks.

Never mind, for those in the same boat, turn off the phone, hold down VOL DOWN key and POWER button to go into tri color menu, then connect the device with usb and finally run the STOCK ROM.
I also had to repartition the SDCard, it was showing 200mb only.

Nawroz said:
Never mind, for those in the same boat, turn off the phone, hold down VOL DOWN key and POWER button to go into tri color menu, then connect the device with usb and finally run the STOCK ROM.
I also had to repartition the SDCard, it was showing 200mb only.
Click to expand...
Click to collapse
Those people in same boat would most likely use search first before creating a topic.

[Q] Help with Android on HD2

So I installed Android on my HD2 using a youtube from some that created an Android App from the Dark Forces Team. Now the Android system is fully rooted into my phone and I want to get rid of it and go back to the Stock ROM of when you first have a HD2. Windows Mobile Device Center won't pick it up since it no longer has Windows on the phone. Can anyone help me get my phone back to it's original Stock ROM?

Once you've downloaded the ROM and you're ready to install it on your phone, turn the phone off and then hold down the volume-down button and press the power button briefly. Keep holding the volume-down button till you get the tri-colour screen.
It should say "serial" at the bottom. Plug in the USB cable and wait till it says "USB" and then flash the ROM as normal.
Good luck mate

Yeah, lol. I am not that cellphone smart. How would I flash it back to the Stock T-Mobile ROM when windows device center won't recognize my device?

Hellraizers said:
Yeah, lol. I am not that cellphone smart. How would I flash it back to the Stock T-Mobile ROM when windows device center won't recognize my device?
Click to expand...
Click to collapse
Uninstallation
It is possible to downgrade to original Windows Mobile 6.5, by just flashing to an Official ROM.
Both MAGLDR and Android will be removed
from here:
http://forum.xda-developers.com/showthread.php?p=10197493#post10197493
DO as the guy said, read the main threads - the stickies
There is a link in my signature - how to flash everything - go and read
And if you are that lazy:
power down the phone
hold vol.down and press and release power button - still holding vol.down
Now connect the usb cable - to your phone and your PC
Run RUU.exe or whatever the file of your WinMo Rom is and follow the instructions on the screen
lol

Thank you guys.

So I have a new question for everyone. Have any of you had the problem with your phone no longer vibrating or the speaker for music no longer works? Well it works when it wants to.

[Q] flashing hd2 with win 7

Hey guys,
So I've decided to flash my mates hd 2 with win 7.
i downloaded the rom from the forum which has the loader (i think).
i watched the video demo on youtube and followed the instructions there.
when I boot up the phone after rom updater, I can't get into the bootloader! all I can see is htc logo and nothing happens.
What do i do? Have I bricked the phone?
Please help!

emclondon said:
Hey guys,
So I've decided to flash my mates hd 2 with win 7.
i downloaded the rom from the forum which has the loader (i think).
i watched the video demo on youtube and followed the instructions there.
when I boot up the phone after rom updater, I can't get into the bootloader! all I can see is htc logo and nothing happens.
What do i do? Have I bricked the phone?
Please help!
Click to expand...
Click to collapse
With the phone turned off, hold the volume down button on the side of the phone and press the power button. Keep holding the volume down button until you see the tri-colored screen (this is bootloader).
at this point i would suggest you flash task29, enter tri-colored screen again (bootloader), then flash magldr v.1.12, then let the phone boot into magldr, choose option 5 and flash wp7.

Hi,
I cannot get into the tri-colored screen now! thats my problem. I updated HSPL to *.HSPL, and tried updating the rom and this happens!
I have tried the reset method by holding Vol + and - keys with Power button, but that doent help too
how do i used task29 when i cant get past the HTC logo on the phone?

emclondon said:
Hi,
I cannot get into the tri-colored screen now! thats my problem. I updated HSPL to *.HSPL, and tried updating the rom and this happens!
I have tried the reset method by holding Vol + and - keys with Power button, but that doent help too
how do i used task29 when i cant get past the HTC logo on the phone?
Click to expand...
Click to collapse
try soft reset. remove the back cover then press a blunt pointed object such as a pen or stylus into the reset button to the bottom left of the SIM, near sd slot, and release. The phone will then reboot. try to get into bootloader as soon as it restarts

hi, i tried installing the rom again, and i get some cpp error?
dont know why.
i tried reverting back to stock rom, installed it successfully, and now when I unplugged the mobile, it turns off. when i plug it in it turns back on and it loops at HTC logo i mean, I turns itself off and turns itself on.
why do you think this happens?

Hi,
The problem is When I plug in my phone to USB, it boots up shows a HTC logo, with
R 2.06.51.07
G 15.30.50.07 U
D 1.66.76641
written in red on left corner and holds on for a few seconds and turns off, and turns on itself.
end note: the phone only starts when I plug it to USB, else its a brick

[Q] Black Screen and wont turn on. Did I brick it?

So I got a stock HD2 from my bro today and decided to put Nand Android on it.
1. I first loaded HSPL 2.08 via HD2TOOL KIT. Everything worked perfect.
2. Then I installed MAGLDR also via HD2TOOL KIT. Got the MAGLDR menu and thought everything was cool. Then I proceeded to shutdown via the last item on the MAGLDR Menu.
3. The HD2 shut itself off. That's when I proceeded to try to turn it back on and got nothing but black screen.
-----so my HD2 right now:
1. Slight vibrate when I long press power button.
2. Stays on black screen with no changes.
3. Cannot get into Tri-color HSPL screen(vol down+pwr).
4. Will not charge
5. When connected to my windows 7 PC, it detects as qualcomm device.
Tried pulling battery, pressing soft reset(no action), Pressing vol up+down+ pwr for hard reset (no action).
Is my hd2 bricked? How is it possible that I bricked it by installing magldr via hd2tool kit?
Any help is appreciated. Thanks guys
//edit: I made a video of what I'm referring to. http://youtu.be/uTPNokbVGus

maniaxzero said:
So I got a stock HD2 from my bro today and decided to put Nand Android on it.
1. I first loaded HSPL 2.08 via HD2TOOL KIT. Everything worked perfect.
2. Then I installed MAGLDR also via HD2TOOL KIT. Got the MAGLDR menu and thought everything was cool. Then I proceeded to shutdown via the last item on the MAGLDR Menu.
3. The HD2 shut itself off. That's when I proceeded to try to turn it back on and got nothing but black screen.
-----so my HD2 right now:
1. Slight vibrate when I long press power button.
2. Stays on black screen with no changes.
3. Cannot get into Tri-color HSPL screen(vol down+pwr).
4. Will not charge
5. When connected to my windows 7 PC, it detects as qualcomm device.
Tried pulling battery, pressing soft reset(no action), Pressing vol up+down+ pwr for hard reset (no action).
Is my hd2 bricked? How is it possible that I bricked it by installing magldr via hd2tool kit?
Any help is appreciated. Thanks guys
//edit: I made a video of what I'm referring to. http://youtu.be/uTPNokbVGus
Click to expand...
Click to collapse
No joke, im gonna say your screen is shot, especially after seeing its shattered. Lol. It honestly sounds like its booting up and working properly. Try putting it in bootloader and plugging it into your computer, like push vol dwn + pwr and hold it for 30 seconds or so. Then see what windows see's it as. It honestly appears to be working (from your video) just that youre not getting and display. If it were bricked, i dont think it would power up or vibrate.

Try opening it up and checking the cables inside to see if they are alright

Thanks for the help guys! I ended up leaving the battery out for 10 min. Put it back in. and everything was back to normal. phew!!!