Database Users

qtek 9000 broken connection port help

yesterdaymy connection/charge/mini usb port broke whilst inserting the charger, by the looks of it its come straight off the board, a bit silly securing such a heavily used connection by just the solder but anyway, i have no idea who how i go about gettingn it repaired by qtek.
the manual has some silly link to some other company who have no help and no links,i just wana send it preferably to a ukrepair centreand get it back is it too much to ask lol. or do they make it this hard to get repairs done to keep there costs down?
any links to where i send my 9000 tooor contactnumbers would be great

Does anybody know about JTAG on ATOM?

Subj. Does anybody research the JTAG way?
I have an information what pins on PXA272 are JTAG interface. But I don't know where it's pins traced out on mainboard. The separation of PXA272 from mainboard is impossible in my case(for a while).
Does anybody know JTAG pins on mainboard for ATOM?
What tools for PC can support JTAG? Can I make a LPT-device for the connection PDA to PC by JTAG?

Did you find jtag pimout yet ? I have the same problem as yours, dead atom !
Basicly, I've seen couple connector in PDA which I believe are JTAG pinout, I've seen it in ETEN and in Atom it seem placed near the simcard holder. You'll see eight gold circle contact on the PCB, I believe six of them are JTAG pinout.
But still can't find the info about those specific pinout.
Still find the soft, mostly run under linux needed in win
I guess JTAG is my only option for waking up my atom, so if you have any info regarding this matter, would you please share with me ??
Thank you

service manual for cingular 8125? square one? Cant use USB/Charge

I downloaded that other service manual for the htc wizard 8125, but mine is the cingular one - that one posted is different ? my phone wont charge anymore, when I bought it, it didn't charge either one of the USB pins on the phone itself was bent, so I bent it back and it works now, but now it wont charge anymore and the battery is dead is there a way to replace just the chargin/pc connect usb portion of the phone? I wanted to look inside to see if I can solder a new connecter inside, thanks guys!

usb connector broken

hi. is there someon in germany, austria or italy who is able to repair my
polaris?? the mini-usb connector is broken, I can not charge the battery or
get any connection.
I have found only one address who offer to repair the usb connector, but I do not want to send my polaris to USA to get the service.
please help if you have some tips or ideas.
thx

Sorry I can't help you, just wanted to say a had the same problem twice - fortunately my provider replaced the hardware without problems.
Good luck anyway!

Broken Mini USB
I just had this same problem with my Cruise. It is only 4 months old and I sent to HTC for warranty and they wanted to charge 400 to replace the motherboard and usb plug. They claimed it was abused. They need their heads examined.
HTC has bad customer service and warranty.

Hi Brunner, you might want to try http://www.mobilephonerepairs.co.uk/home.asp . They are based in London, UK and sending to/from Germany was no problem for me. Just mail to [email protected], explain your issue and ask for a repair price quote.
So far I have only bought a replacement LCD from them and not used their repair service - but will do so next week. Anyway, they were friendly and supportive, and the LCD arrived in good condition and well packaged. Overall a very good impression.

i have some expirience with HTC repair, and can say that the most problems in HTC are in main board - very unstable connections with chips and pcb.
try to tense unit left and right side while usb is connected.
one more - switch off unit (take off battery and pull in) and connect adapter - i am sure in this mode charging will go - this is separate chip doing this automaticly ,but when processor running can sw it off. Stay 1-2 hours and battery will go full.

thank you for your replies... I'll try to contatct the london adress (big thank to doctah).
to romensat: thank also for your , but it is so, that I am not able to connect the usb cable at all, because the little plastic peace into the connector is broken out an some pins are damaged.
regards
brunner

just curious: how did this end up?

[Q] Which component do I need to replace mini-USB port

Hi there!
I'm trying to replace the mini-USB charger port in my hd2 but havent had the chance to open the phone yet and trying to buy components. which part do I need for it? a 5-pin or 8-pin?
I am currently awaiting for my torx screw drivers to come through the post and preparing all the parts I need. So far, I have not found any site that has showed how to fix this on the HD2.
My plan is to purchase the mini-USB port, open my phone up and solder in the new port. Has anyone attempted this yet successfully?

I also posted a response to this in the "Arrow
[FAQ] Q&A: How? Where? what? Ideas? [New Users?]" thread you posted this in. The HD2 has a 5 pin micro USB port, it is soldered to the bottom of the main board. I have read post of people having success with replacing it and I have also read post saying it is not just a easy task unless you are good at soldering. Good luck.

thanks! (my apologies for double posting). from what i've read so far on people trying to replace these parts on the internet, it's a lot easier if you used a dremel to cut off the rear shielding of some sort.
i think my screen needs replacing along the way but i wanna get the charging port working first
off to order some parts off ebay now

In hackaday there's an article on replacing usb ports.. I cant post it but I can send it over by PM if you want
By the way, do you mind posting some photos of the HTC HD2' usb port when you open it? I never opened mine but I need to change the usb port too.. so any intel I can get in advance.. the better ;-)