[Q] Uncheck Fast Boot off Application Menu - myTouch 4G Q&A, Help & Troubleshooting

So I have Fast Boot unchecked in the Applications setting, and every time I do restart my phone, my ringtone and notification sound gets reset. Is this normal?

Related

Vibrates, bleeps and led led flashes after reset

Can anyone help with this one?
Afetr a soft reset my mini s vibrates (approx 1 second) and bleeps the alarm 1 notify message. It does this about 6 times at 5, then 10, then continues at 30 second intervals. The red led flashes untill I fully charge it again.
I have checked the sounds and notification but can't find anything that it might be - I thought it might be the signal for a wireless network.
Any ideas would be appreciated.
I was actually having the same problem. My alarm (that was no longer set) kept going off at a certain time of day for no reason. Also when I soft reset, the alarm/notifications also went off. After reading this thread: http://forum.xda-developers.com/viewtopic.php?p=353267&highlight=reset+alarm+notify#353267, I tried turning off all options under Sounds & Notifications > Notifications > Event: Reminders > uncheck all. Now, try a soft reset and everything should be back to normal. (Re-enable the settings if you wish or just try the Phone Alarm program like other people to avoid the headache.)
I tried alot of things, but this one worked. I tried to remove duplicate notification entries and see if any outstanding processes were running under Task Manager--neither worked.
Notifications
Try using memmaid to see if you have any old notification in the queue (not the same as looking at the "sounds and notifications" applet.
You may find old and duplicate notifications in there.... don;t just delete them all - as some of the notifications are required.
You should have searched first - there are loads of posts about this.
Charlie Grillo

SMS vibrate notification not working

As the title says really, I cannot get my Hero to vibrate when I get a text message. In Messages > Settings > Vibrate, the option is ticked but even if I untick / restart / retick it still doesn't work. I've also tried pressing the volume button down to vibrate mode and back again but that makes no difference.
I've even tried working with Handcent and yet I still cannot get the vibrate working. Everything else works such as the status bar notification but that's it.
The vibrate part is definitely working for phone calls and other apps so I don't think that it's a hardware problem. Any idea what could be causing it?
Cheers.

Disable Vibrate on Reboot

How can I disable my phone from vibrating when I reboot it? I set my phone to backup and reboot early each morning. Sometimes the vibrate wakes me up.

Stock SM-G900P black screen, functional status bar and car mode only.

EDIT: Resolved by using android device manager to push a factory reset.
Today my phone boots fine and applications like my VPN begin running normally. However, the entire screen is black (besides my status bar) and there is no haptic feedback or lock screen accessibility. I changed my lockscreen and encryption password last night and never properly rebooted; the phone powered off due to lack of battery... I suspect this may have triggered the problem.
- I can pull down the status bar and change settings, activate car mode (which works,) etc. I cannot enter the full settings menu or any applications though. Nor am I prompted to enter my lock screen password after the initial decrypt during boot.
- Removing SD card does not help.
- Booting into safe mode does not help.
- Opening S finder via pulldown menu briefly flashes my home screen or whatever application is open.
Does anyone have any ideas about how to fix this?

Some Settings were reset after reboot

Hi all
I am not sure anyone experience this problem whenever a reboot occurs( I am using the periodic reboot function on s8), some settings gets changed.
For mine I set my screen timeout to be 30s. But after reboot it jumps back to 1min.
Vibration intensity for notification I have set it to max, upon reboot it switches off the vibration for notification.

Categories

Resources