Related
Hey guys I have a hd2 that wont boot up anymore. I have installed several windows 6.5 cooked roms into this device for a while now. Recently this device has been given me a lot of problems until finally it took a dump. Now everytime i power up the device it stays in the splash screen. It doesnt even show radio version, rom version,etc on the bottom left of the screen. So is this hd2 dead or is there some way that i can fix it. I even tried installing tmobile's official rom on this device by going into the "rainbow screen" so that the device can be seen by using the usb cable, but alas....it didnt work either. So any help would be appreciated .
If it doesn't install, and nothing installs, then you need to take it to repair I guess.
I had a feeling about that. I just figured there was no way to fix it and the fact that i couldnt send it back to tmobile to get a replacement was out of the question since the firmware was modified. But your saying there are shops that fix these kinds of issues? If so, I better start looking around over here.
frequency1 said:
I had a feeling about that. I just figured there was no way to fix it and the fact that i couldnt send it back to tmobile to get a replacement was out of the question since the firmware was modified. But your saying there are shops that fix these kinds of issues? If so, I better start looking around over here.
Click to expand...
Click to collapse
why dont you try sd card method for flashing your rom !1! you can pm me if you need further help
Do you mean that it can't get to the boot loader screen (rainbow) or that trying to install a ROM from there didn't work? You might want to flash the original HSPL too, just to check.
What I mean is that everytime I boot up the hd2 it stays stuck on the splash screen. It doesn't even show the rom information in red at the bottom left corner of the screen. But I can boot to the tri color menu though. I have tried to install the tmous official rom by plugging the USB when I'm in the tri color menu and it always stays stuck at 9%. So is there way to fix this or am I screwed.
Sent from my Android Powered HD2 using XDA App
Try the sd-card recovery instead of the USB one.
http://www.jayceooi.com/2011/01/01/how-to-upgrade-htc-hd2-rom-through-sd-card-video/
After that, even if it fails, it shows only SPL in the tri-color screen then you are set to claim warranty.
frequency1 said:
Hey guys I have a hd2 that wont boot up anymore. I have installed several windows 6.5 cooked roms into this device for a while now. Recently this device has been given me a lot of problems until finally it took a dump. Now everytime i power up the device it stays in the splash screen. It doesnt even show radio version, rom version,etc on the bottom left of the screen. So is this hd2 dead or is there some way that i can fix it. I even tried installing tmobile's official rom on this device by going into the "rainbow screen" so that the device can be seen by using the usb cable, but alas....it didnt work either. So any help would be appreciated .
Click to expand...
Click to collapse
Well my bro... i think thats nand problems or heating issues ... does flashing rom goes all ok or it stops during flashing ? if stops than check if you phone is hot - hotter than normal.
Try this : Take out battery, memory card, sim card and put you phone in the fridge for about 5-10 min ( dont worry tried many times... no harm ) meanwhile prepare your sd card to flash rom with sd card method ... to do that extract Ruu rom - stock one - download with hd2 serial nr ( winrar, 7zip etc) find Ruu_Signed.nbh rename it to LEOIMG.nbh than copy to sd card ( format you sd card fat32 and make sure it works ... 2gb will work ) take phone out from fridge put sd card & battery into phone power one phone while holding volume down key ( go into tricolor screen - bootloader) and follow procedure in phone... i hope everything goes well and you fix you phone... but if still no success than flash android or wp7 ( if you have warranty flash stock SPL and return phone).
best regards from me
Hello,
My htc hd2 won't start anymore.
When I press the on button it first goes to the Green HTC HD2 letter screen, then the NAND bootingscreen with this text:
aMAGLDR V1.11
by cotulla 2010
booting android from NAND
ANDROID LOAD at **********
From nand
blablabla
etc etc
LOAD DONE!
12345
GO GO GO
And at the end an Android logo with HTC HD2 underneath it.
and then it's starts all over again.
How can I fix this? or restore everything back to the basics of android?
I dont know anymore specs from the Nand build
only it has the CyanogenMod on it and it's Gingerbread.
Plz can anyone help me, I'm gonna fly tomorrow to the States for holydays so I very appreciate it if anyone can help me before I'm gone.
(I'm sorry for my bad english!)
Grtz Jordy
constantly rebooting a few seconds into the sequence is sometimes down to a bent battery pin. check them carefully. Failing that id suspect a fresh flash is in order.
I have a bent battery pin indeed. but i have it since the third day i bought this phone (1,5 years ago).
How do i make a fresh flash ? :$
Before fresh flash .. what has made your Android fall into a bootloop? have you flashed anything via cwm recently? that could be it.
nope did nothing. only thing i did was putting my sd card in my comp, and after that first some apps didn't work correctly, but that happens me all the time. so i reboot and so it all started ...
Can u guys give me a working link to android on the hd2..i only want to boot from sd
Sent from my HTC Glacier using XDA Premium App
Ok,
You didn't turn off your device, you removed the sd card immediately (or unmounted it from settings), right?
You have data2sd enabled on your build, or apps2sd?
Try to remove sd-card and then boot...
If above ddn't work, try to reflash your build through cwm (without wiping data, which will only restore your system to original state) ..
Report back ...
thefuzz03 said:
Can u guys give me a working link to android on the hd2..i only want to boot from sd
Sent from my HTC Glacier using XDA Premium App
Click to expand...
Click to collapse
Would you mind using the search tool and not hijacking other's threads?
here you go: http://forum.xda-developers.com/forumdisplay.php?f=735
Click to expand...
Click to collapse
@Marvlesz; yes i unmounted it from settings, and im using apps2sd
without sdcard he still wont start normally...
could you explain how i do the reflash?
with the volume button down and then start it up it also stays on the colored screen...
I'm sorry but I'm very newbie @ this stuff.
It depends on how you flashed this ROM in the beginning .. ( I assume you did it through cwm)
So get to the website of this rom and download it again (or pass if you have it on your pc)
bootup your phone while holing nothing but the power button, phone will remain on aMAGLDR and won't boot into Android.
Go to option 8. AD Recovery (using volume rockers) and press Green button (dial) ..
A black screen with orange text will appear, remove your sd and put it into your pc, copy your ROM's Zip file and return sd to phone.
Go to "install zip from sd" .. choose second option, and choose the rom.. then hit yes. After it's done, hit on reboot.
Report back ..
Hi. im sorry i didnt listened to you :O
I saw the menu and did the hard reset, everything is gone, but i dont mind, im glad he is working fine again
Thanks for your help!
lol, Im sorry to hear that you lost your information ... I recommend doing NANDROID backups from time to time (from orange menu) as well as apps backups with (titanuim backups) .. even if you messed up with the system files, you still can get it back ..
Anyway Im glad that you phone has come back to life..
Quick
Quick help
im having a problem with my HTC HD2
im having pretty much the same problem..everytime i try to turn it on it loads up all the way to the occupy together screen then it just starts back over again. so i left it on the charger and let it charge for a whole night and its still doing the same thing. i've tried to do a hard reset but my volume down button doesnt work =/ is there something i can download or is there an update that i need for it to work again?! SOMEONE HEEELP!
Hi,
I was actually trying to put ICS on my device from GingerBread Nand.I connect device with USB and I was trying to Wipe using HD2 Nand Toolkit.As device reached 100%, it suppose to restart but in my case it hanged at 100% for 30 mins .Then I restart by removing the battery.Now when 3 color screen shows, it shows serial at the bottom but it change to usb when I connect to pc .The problem is now when I try to re-partition ,it says device is not connected.
So I thought I may be able to install windows by downloading actual rom from T-Mobile and place the file to sd card by renaming it to LEOIMG.nbh.I did it using a class 2 16Gb card.As I press both volume down key and power button, it goes right to the rainbow screen.Please help me!
Thanks for reading the issue.
Are you using cLK or magldr?
Thanks for your reply.Actually i wanted to use cLK but I actually could not able to go that far.Please read the problem which might give you some clue to help me.
Waht does it say at the top of the tri-colour screen?
have a look here
http://forum.xda-developers.com/showthread.php?t=1402975
and here
http://forum.xda-developers.com/showthread.php?t=1021837
let me know if your still having problems after reading.......
Personally, I'ld just go back to win6.5
http://forum.xda-developers.com/showthread.php?t=623283
and start over again.
Works for me most of the time.
Hello guys.
I had overheating problems with NAND Cyanogenmod7, android 2.3.7
I wanted back to WINMO 6.5, so I downloaded file from HTC local.
I put the phone in tricolor, put usb and started sync, agreed with everything after running file from desktop on PC. It started good, but stopped at 8% with red color.
Had to pull the battery out and interupt, now I get message: SOFTWARE UPDATE FAILED, PLEASE TRY AGAIN (IN RED COLOR), and it directs me to tricolor screen. :S
Damn, is it completely bricked?
Should I try install by taking SDcard out, sync with USB-SD-card transfer? Then maybe rename the RUUSIGNED.nbh file to leoimg.nbh, then move it to root on SD card and turn the phone on this tricolor screen? :S
I don't know what to do at all. :S Don't want to mess it up even more, so please anyone who knows a little about this help a poor guy?
PLEASE!! Thanks for any help!
Could anyone just come with a solution? Just come with something, please. The phone has been OFF after this happened to spare battery percentage, so I want to wait till someone can tell me what to do eventually.
Try to read the appropriated topic http://forum.xda-developers.com/showthread.php?t=668347 and to ask there. No need to open new thread in the wrong section - no-one will read or write the answer here in mobile development
Hello!
I am new here as you can see. this is not primary proplem anymore.
I installed XDAndroid GBX0C 2.3.7Build to my HTC balckstone and everything works well, but camera tells me "camera error; Cannot connect to camera."
is there any fix for that?`
and the other thing, when i boot phone it goes to win6.1 and i have to go settings etc. and boot it from haret.exe.
so am i done something wrong or something? Solved
So if somebody can help me i would be very pleased
Ps. And sorry my bad english, i just a finnish.
Edit: I try reinstall, i post is changes comes.
E: No changes, still not working.
EDIT!!!!
SO if someone can help me, place do it
E.
And this just happend, phone just stop working whit black screen.was have to took battery off, and then it took about 10-30min to boot to win again.
THIS IS PRIMARY PROPLEM.
AAAAND now it wont even start. stuck in "smart mobility"...
Please read post's for more information.
now i have tried flashing original rom from CPU and Storege card... both install it correctly and says everyting is ok, but still its stuck at "smart mobility" screen.
it wont even shot in the right corner that red text of versions etc.
so what's the solution to this proplem? i would be very pleased if some one could tell me how to fix my proplem. i know there is someone who know what i should do.
Could I solve this proplem if i unlock and install custom rom? just wondering if that would help?!
Hi,
"Smart Mobility" screen
I had that problem too, and did a hard-reset.
Hold Volume Up + Volume Down buttons (hold hard) and press Power switch until you see the warning sign to confirm a hard reset.
The system will do a re-flash of the original Windows Mobile ROM.
Start Android by running HaRET from Windows Mobile
Yes, you have to run HaRET.
You can make it simpler by making a short-cut in Windows Mobile Start Menu.
Tap and hold on HaRET until you see the Dialog Box to Cut, Copy, etc.
Tap Copy.
Go to Device-Windows-StartMenu, paste as a shortcut
These steps are in the Touch HD Manual. If you do not have one, download it from the HTC website.
chan.sk said:
Hi,
"Smart Mobility" screen
I had that problem too, and did a hard-reset.
Hold Volume Up + Volume Down buttons (hold hard) and press Power switch until you see the warning sign to confirm a hard reset.
The system will do a re-flash of the original Windows Mobile ROM.
Start Android by running HaRET from Windows Mobile
Yes, you have to run HaRET.
You can make it simpler by making a short-cut in Windows Mobile Start Menu.
Tap and hold on HaRET until you see the Dialog Box to Cut, Copy, etc.
Tap Copy.
Go to Device-Windows-StartMenu, paste as a shortcut
These steps are in the Touch HD Manual. If you do not have one, download it from the HTC website.
Click to expand...
Click to collapse
I have tried hard reset, but that didn't work, and tried to put original rom too, and nothing happened. I have 2 original roms
RUU_BlackStone_HTC_FIN_1.14.414.2_Radio_52.49a.25.26_1.09.25.14_Ship
RUU_BlackStone_HTC_FIN_1.56.414.0_Radio_52.62.25.34_1.13.25.24_Ship
but those didint work. i will try today againe. and then if it going to work i will put that haret to start menu.
I'll try that 1.14 first...
flashed that 1.4 rom and waited about an hour and nothing happend... i jsut did hard reset and wait againe if it gonna boot now...
i was thinking that should i put custom rom, coz if something went wrong whit the official?
I mean if there is something wrong in phones hard drive? like something wrong whit registery or something?
something that wont let win start. if there is, how i can fix that?
masentava said:
Hello!
I am new here as you can see. this is not primary proplem anymore.
I installed XDAndroid GBX0C 2.3.7Build to my HTC balckstone and everything works well, but camera tells me "camera error; Cannot connect to camera."
is there any fix for that?`
and the other thing, when i boot phone it goes to win6.1 and i have to go settings etc. and boot it from haret.exe.
so am i done something wrong or something? Solved
Click to expand...
Click to collapse
GBX0C2.3.7 Build is on SD card.
You will need to boot from Windows Mobile first, then run HaRET to reboot to XDAndroid.
If XDAndroid hangs, you need to remove battery, put back battery and power on. Then you see Windows Mobile and do above step again.
Always, from XDAndroid to go back to Windows, you need to Power Off, and then Power On again.
chan.sk said:
GBX0C2.3.7 Build is on SD card.
You will need to boot from Windows Mobile first, then run HaRET to reboot to XDAndroid.
If XDAndroid hangs, you need to remove battery, put back battery and power on. Then you see Windows Mobile and do above step again.
Always, from XDAndroid to go back to Windows, you need to Power Off, and then Power On again.
Click to expand...
Click to collapse
I undestood that... but thats not the proplem anymore coz windows wont start, its stuck in "smart mobility"
i tryed to flash original rom's bot that didint work....
so prolem is how do i get windows back to work?
now i have tried flashing original rom from CPU and Storege card... both install it correctly and says everyting is ok, but still its stuck at "smart mobility" screen.
it wont even shot in the right corner that red text of versions etc.
so what's the solution to this proplem? i would be very pleased if some one could tell me how to fix my proplem. i know there is someone who know what i should do.
masentava said:
I undestood that... but thats not the proplem anymore coz windows wont start, its stuck in "smart mobility"
i tryed to flash original rom's bot that didint work....
so prolem is how do i get windows back to work?
now i have tried flashing original rom from CPU and Storege card... both install it correctly and says everyting is ok, but still its stuck at "smart mobility" screen.
it wont even shot in the right corner that red text of versions etc.
so what's the solution to this proplem? i would be very pleased if some one could tell me how to fix my proplem. i know there is someone who know what i should do.
Click to expand...
Click to collapse
You say you are flashing the original ROM. You mean the original HTC Windows Mobile 6.1 ROM? I understand you can only get this done only from HTC authorized centers.
(800) stedntf
chan.sk said:
You say you are flashing the original ROM. You mean the original HTC Windows Mobile 6.1 ROM? I understand you can only get this done only from HTC authorized centers.
Click to expand...
Click to collapse
I have
This
RUU_BlackStone_HTC_FIN_1.14.414.2_Radio_52.49a.25.26_1.09.25.14_Ship
And this.
RUU_BlackStone_HTC_FIN_1.56.414.0_Radio_52.62.25.34_1.13.25.24_Ship
Blackstone/HD Links | Guides | Stickies | Roms | Read before posting
http://forum.xda-developers.com/showthread.php?t=999925
U have to install HTC USB Sync Drivers drivers
Put the phone into bootloader by pressing volume down + power button
plug the usb cable to the computer/laptop
and then run the shipped rom executable file... when the tricolor screen displays USB at the bottom.
else extract the RUU_signed.nbh or any file with .nbh extension from the shipped file with zip viewers like 7-zip
rename the file to BLACIMG.nbh
Put into the root of memory card
put the phone into bootloader and follow the screen instructions..
And the most important thing... search the forum.. before posting..
Hope this works for you
Hi there! I think that you can't reflash even a Original ROM without unlock the phone with new Hard-SPL from Olinex ,considering that you have tried a Hard Reset and nothing happened ,your last option is to unlock the phone and reflash the ship ROM ,or to flash a custom ROM ( is not a good solution if you still have warranty,but still you cand revert your stock SPL:good so ,you have nothing else to lose , all is left for you is to try what i said before . If you don't know how to do it,let me know and i will post the exact links to instructions.
Hi all,
You can try a NAND ROM like the new release of Fagyi. There is an easy step by step manual to installation. You will lose winmo, but you will have a real android.
It looks pretty and he has solved many of the issues of previous versions.
Regards
CristianCRS said:
Hi there! I think that you can't reflash even a Original ROM without unlock the phone with new Hard-SPL from Olinex ,considering that you have tried a Hard Reset and nothing happened ,your last option is to unlock the phone and reflash the ship ROM ,or to flash a custom ROM ( is not a good solution if you still have warranty,but still you cand revert your stock SPL:good so ,you have nothing else to lose , all is left for you is to try what i said before . If you don't know how to do it,let me know and i will post the exact links to instructions.
Click to expand...
Click to collapse
well, maybe i will try to unlock, i looked some instruction, aaand didint understood
So if there is quide to dummiest dummies, so i think that would help me!
But thx to all answers!
Do a Search and read the posts
masentava said:
well, maybe i will try to unlock, i looked some instruction, aaand didint understood
So if there is quide to dummiest dummies, so i think that would help me!
But thx to all answers!
Click to expand...
Click to collapse
You need to understand what you are going to do or you may end up with a phone that does not work anymore.
Do a search of the forum and read the posts. There are so many.
http://forum.xda-developers.com/sitesearch.php?q=unlock blackstone