Changing the Desire HD Text above the unlock text - Desire HD General

When you click the power button it loads to the lock screen.
On that screen above the 'pull down to unlock' text there is some text I think its of my carrier.
How can you change that text? (currently it says Crazy Johns) and I would preffer my own name...
Thanks
chris

Related

[QUE] WM Phone Canvas

Hi,
I have a WM6.5 rom and when someone is calling me I get a simple popup window and two softkeys at the bottom: accept, reject. I read that when the screen is locked, there is a different incall screen, where you have to slide to answer or ignore. I do not lock my screen, so would it be possible to have the better incall screen by default?
Thanks a lot for the replies.
The app being mentioned is A_C's S2U2 and it provides a full screen pop-up for contact pictures.
I ran without a screen lock for a while until my pocket made a call and used up the £15 of just applied top-up. Now i use S2U2 and have yet to have any problems.
Thanks, will try it tomorrow
Kamill said:
Hi,
I have a WM6.5 rom and when someone is calling me I get a simple popup window and two softkeys at the bottom: accept, reject. I read that when the screen is locked, there is a different incall screen, where you have to slide to answer or ignore. I do not lock my screen, so would it be possible to have the better incall screen by default?
Thanks a lot for the replies.
Click to expand...
Click to collapse
you can also try this one, i think this is what u are really looking for http://forum.xda-developers.com/showthread.php?t=493593 the latest version is on post 20.
Thanks, but I've found an ideal solutiuon - AutoLock. Now the screen is locking on an incoming call and I get the sliders

Time delay on text reply

First of all, I have the US version of HD2.
When I receive a new text message, I click on the text itself. Then click on the white space that labeled "tap to add text" to reply. Now it brings up the keyboard on the bottom of the screen. When I start typing, the texts don't usually show up on the screen right away. Sometimes the phone will freeze. Do any of you guys have the same problem? If so, how do I fix that?
Thanks in advance.
::bump:: any feedback on this would be great
happens to me also, i noticed if you click 2 times to add text it usually prevents this.

Help me reduce the button presses to check messages

currently when i get an sms i have to:
-press a hard key
-unlock the slider
-press the message tab
-then when i get to messages it isn't set to the latest message it is set to the last message checkeds
-then i have to scroll to message 1
coming from android that is a lot of button presses. in android you could actually read the first couple of lines from the lockscreen. is there a way for me to reduce the button presses?
Install S2U2.
S2U2 will be able to display the message on the screen (while the phone remains locked).
Do you have win6.5 lock enabled? when you get a message it should have a message slider and if you slide that it will automatically take you to the sms tab (or email tab if you got an email or missed call tab if you got a missed call or.....)
Set titanium as home screen then after unlock hit text.
Or you could:
-press a hard key
-tap the slider
-unlock the new slider which pops up
should take you directly to your new message.
dislabled said:
Or you could:
-press a hard key
-tap the slider
-unlock the new slider which pops up
should take you directly to your new message.
Click to expand...
Click to collapse
Bingo!
dislabled said:
Or you could:
-press a hard key
-tap the slider
-unlock the new slider which pops up
should take you directly to your new message.
Click to expand...
Click to collapse
this takes me to the messages tab, but it does not take me to the latest message. it takes me to the last message i checked when i was in that tab so i still have to scroll once.
i will check out that s2u2 and report back.
ok so i downloaded s2u2 and love the functionality of it. i hate the fact that it looks like iphone though i wish it were more original looking. or even the same but a different colorway, especially in the message bubble that pops up. but hey, it was free and works great so thanks for suggesting it.
much better than the stock lock screen for sure!
methodz said:
ok so i downloaded s2u2 and love the functionality of it. i hate the fact that it looks like iphone though i wish it were more original looking. or even the same but a different colorway, especially in the message bubble that pops up. but hey, it was free and works great so thanks for suggesting it.
much better than the stock lock screen for sure!
Click to expand...
Click to collapse
There is a disturbing amount of themes for S2U2, if you don't like the stock one (which does mimic the iphone alot) you should look at the other ones.
Svegetto said:
Do you have win6.5 lock enabled? when you get a message it should have a message slider and if you slide that it will automatically take you to the sms tab (or email tab if you got an email or missed call tab if you got a missed call or.....)
Click to expand...
Click to collapse
How do I enable this, I've seen the message slider in other peoples screenies, but I'm not sure how to enable it.
Many thanks
install the hd mini unlock screen, shows most of the message when you wake up the phone with out having to slide to unlock
HTC_Junglist said:
How do I enable this, I've seen the message slider in other peoples screenies, but I'm not sure how to enable it.
Many thanks
Click to expand...
Click to collapse
You just click the slider instead of sliding it. It obviously only works if there's something to show you.
johncmolyneux said:
You just click the slider instead of sliding it. It obviously only works if there's something to show you.
Click to expand...
Click to collapse
Yeah but at the moment, message or missed call, these icons on the lock screen don't show.
bump, thanks for any pointers
HTC_Junglist said:
Yeah but at the moment, message or missed call, these icons on the lock screen don't show.
Click to expand...
Click to collapse
So I understand, after a missed call, email sms etc. do you see a number on the unlock slider? If so, and you tap the unlock slider, you should see one or more notification sliders pop down. Are those not appearing? If that's the case, have you ever installed anything intended to modify the lockscreen in any way?
Sean3 said:
So I understand, after a missed call, email sms etc. do you see a number on the unlock slider? If so, and you tap the unlock slider, you should see one or more notification sliders pop down. Are those not appearing?
Click to expand...
Click to collapse
No unfortunately.
Sean3 said:
If that's the case, have you ever installed anything intended to modify the lockscreen in any way?
Click to expand...
Click to collapse
Yes I have (See screenie), but even before this change I've not had the other icons come up. I've always wondered how I could get them to show up since having the phone.
I'm on Orange network (UK) and on official 1.66 rom.
Thanks for your help.
LOL, it has a little number "1" on your slider, lol
just tap that a$$
methodz said:
LOL, it has a little number "1" on your slider, lol
just tap that a$$
Click to expand...
Click to collapse
Still nothing, that screenie was taken after tapping
It's not important, it would just be nice.
well it is displaying right. normally you would just touch the slider instead of sliding it and a secondary slider would appear, but if that is not happening for you i don't know where in the settings to enable/disable it.
HTC_Junglist said:
Still nothing, that screenie was taken after tapping
It's not important, it would just be nice.
Click to expand...
Click to collapse
I can't imagine why it's not working. I've attached a cab with the original lockscreen files. You may try installing it and see if that works. Outside of that, you may have a reg setting inadvertantly changed somewhere.
@methodz: Are you still using S2U2? If not, or you go back to the oem LS, I think we can take your original question one step further (literally). Not sure if you've seen this, but you can change the commmand of the notification slider to go directly to your email inbox instead of the manila tab, or have the sllider actually call your voicemail directly instead of taking you to the dialpad. I dunno about sms as I haven't tried it, but either way it may worth looking at the bottom of this post here by Da_G: http://forum.xda-developers.com/showpost.php?p=4268138&postcount=3. It will require a tad of registry editing, but for me it's worth it. Less steps to get to things.

HELP PLEASE! Text and In-Call Issues on HD2

I have the TMOUS HD2 and I am having 2 problems and I want to see if anyone else is either experiencing this or if it's just my phone.
On SENSE SMS messages, the keyboard will auto deploy and I will begin to type or Swype and nothing will show, unless I select or highlight the last message and then refocused on the blank area of my current message and then it will show. It's almost as if the screen doesnt redraw the text as I input it. It's VERY annoying.
When I'm in a call, and pull the phone away from my face, the screen will come on, but I can't press or access any button on the dialpad (Eg, Red Endcall or Keypad button) but I am able to press all of the hardware buttons and go to the home screen of Sense and do everything else on the phone. This is really frustrating, because I call my bank and I can't use the touch tone features to access my account or put a caller on hold and do the other features while on a call.
I would just like to know if these are isolated incidents that I'm just experiencing with my HD2, or is there a solution to theses issues. Any help would be GREATLY appreciated. Thanks guys.
Bigcountryed said:
On SENSE SMS messages, the keyboard will auto deploy and I will begin to type or Swype and nothing will show, unless I select or highlight the last message and then refocused on the blank area of my current message and then it will show. It's almost as if the screen doesnt redraw the text as I input it. It's VERY annoying.
Click to expand...
Click to collapse
I think that's just something you have to deal with, I used to get it on the O2UK stock 1.43 ROM after installing the hotfix (I assume it's cooked into the TMOUS ROM). After installing Windows Mobile 6.5.x I haven't come across the issue.
Bigcountryed said:
I have the TMOUS HD2 and I am having 2 problems and I want to see if anyone else is either experiencing this or if it's just my phone.
On SENSE SMS messages, the keyboard will auto deploy and I will begin to type or Swype and nothing will show, unless I select or highlight the last message and then refocused on the blank area of my current message and then it will show. It's almost as if the screen doesnt redraw the text as I input it. It's VERY annoying.
Click to expand...
Click to collapse
This is a known bug that we all have. When you start typing, sense is busy loading all your txts from that contact, and when it has finished loading them it auto focuses on the last text. During that time you cannot see what you are typing, though it is still being typed. When you then select the text input area your typing appears.
The fix is to not have many texts saved.
When I'm in a call, and pull the phone away from my face, the screen will come on, but I can't press or access any button on the dialpad (Eg, Red Endcall or Keypad button) but I am able to press all of the hardware buttons and go to the home screen of Sense and do everything else on the phone. This is really frustrating, because I call my bank and I can't use the touch tone features to access my account or put a caller on hold and do the other features while on a call.
Click to expand...
Click to collapse
you have either bsbtweaks "increase tap time" tweak turned on, or the increase taptime cab from the hints tips thread.
This tweak stops the incall screen from registering presses. Turn it off.
These are both very common, and there must be a few hundred threads asking the same questions.
The BST thing fixed the call problem I was having. And imma try to clean out the sms message to regain speed. Thankyou VERY much Samsamuel and Kalavere! Luv ya like a play cousin!

Hi all, got a question

I looked and searched (a few forums also) and cant find an answer. I have a TMOUS HD2 with their new ROM freshly installed (yesterday) and when I get a text message it will show the message but the only option I have is to "Hide" it. I tried clicking on it and everywhere else but it wont open the message unless I go to "Messages" so is there a reg edit I can do to get it to show "open" instead of hide...Thx...Tj
P.S. I would rather not install any programs but would like to work with what the phone has.
Hmm am I the only one with this problem?
no this isn't exactly a problem. This is a feature that is on the phone where if your at your lock screen or your display screen iss hut off thats what shows when you get to the lock screen. It's so you can view your text and who it's from before you unlock your phone and go into their threaded message.
I'm sure there is a way to disable it via reg but not sure.
sherlockpwnz said:
no this isn't exactly a problem. This is a feature that is on the phone where if your at your lock screen or your display screen iss hut off thats what shows when you get to the lock screen. It's so you can view your text and who it's from before you unlock your phone and go into their threaded message.
I'm sure there is a way to disable it via reg but not sure.
Click to expand...
Click to collapse
OK but I do not have the screen locked. I can see the message and who its from but to open or reply I have to go to messages because the only option is to "hide" it...Tj
as with all things it can glitch. if you have your lock screen disabled but then you hit your right button for end call to turn off the display then touch another button to bring it back it could possible bring that up. I will see if I can find someone that knows the answer.
sherlockpwnz said:
as with all things it can glitch. if you have your lock screen disabled but then you hit your right button for end call to turn off the display then touch another button to bring it back it could possible bring that up. I will see if I can find someone that knows the answer.
Click to expand...
Click to collapse
OK thanks a bunch...Tj

Categories

Resources