After I installed a rum do not know what happened, I could not use the SD card, and I could not get into recovery mode. We tried to make root, I did step 1, but when I do step 2, does not communicate with the PC. I watched many tutorials, I managed to make SD card, but when I do step 2 for root because it can not communicate with PC. Please help me, because they are not too familiar with Android. If someone can tell me how to do step by step, what to press and where
I had the same problem, sort of
Look for the USB-Unbrick thread!
In that thread there is a solution for both of your problems
I have experience and do not know where to write command. If someone help me to explain step by step what to do or to go to my PC using TeamViewer. My address is [email protected] messenger.
Related
Hi...
I have p3400 gene .... I really want my phone to upgrade to WM6.1proffesional
So, I tried the the guide available here at xda-develpors [GUIDE] Step by Step Guide for Upgrading P3400 and P3400i ROM + FAQs
Now, My phone is dead ... when I press the power button ... the red and green button blink once and nothing else happen
I tried the Power+camera and a screen with 3colors appear (red,green,blue) with these writing on it ...
ONLP 1.10.0000
SPL 1.10.olip
my S/N is HT8xxxxxx.
I have widows 7 on my computer so I tried :
I did [Step 2: Preparing your phone] successfully
then in step 3
You need to take these steps :
1. Go to desktop, right click Computer, and select Manage. Go to Device Manager. Now under the section Mobile Devices, Double Click : Smartphone USB Sync.
2. On the Drivers tab, click "Update Driver..." button. On next screen click : "Browse my computer for driver software".
3. Click : "Let me pick from a list of device drivers on my computers". Click "Have Disk.." on next screen. Click "Browse..." and go to the folder extracted in step 1. There, go to USBDriverforActiveSyncVista folder. Here select the file "wceusbsh.inf" and click OK.
4. Click Next and finish the wizard.
Click to expand...
Click to collapse
but when I select "wceusbush.inf" ... I get this error
HTML:
the folder you specified doesn't contain a copatible software driver for your device. If the folder contains a driver, make sure it is designed to work with windows for x64-based systems
I don't know how to solve it
and when I try the ROMUpdateUtility program ... I get [ERROR 300
when I tried Step 5: Use the Orefkov Unlocker
after opening the Mtty1_42.exe ... here are the problems
- I don't find the usb button
and when I click okay ... on the next screen ,,, the keyboard just doesn't work
only [delete] and [ctrl+v] nothing else works ...
P.S. I use the windows mobile device center on my computer to sync my info to my p3400
need help to solve the problem
I really want the WM6.1proffecional
and could any one give the best rom for it??? and will I have a touch flo problem afterwords ????
Please help A.S.A.P
come on guys ... The site of the best develepors and till now .... no answere
just so you get this solved as fast and smoothly as possible...lets just go through this step by step...
(i don't mean to sound rude but there's something you need to know before you start expecting miracles here, let me tell you...this site does indeed have an amazing lot of people who have spent countless amount of time working on and with their phones...but not everyone has the time to log in everyday and keep a track of the infinite number threads they might be following...and even when they do log in and read your problem, they might not necessarily have a solution for you at that time...
patience is the key...wait for someone to read, understand and then provide a solution for your problem, if it exists...this is a phone developers site...not one for magical cures
and most importantly...post your problems in the appropriate threads...like this one should've been in the Q&A thread in the ROM development section...or in the upgrading thread itself...you'd get more replies that way...you don't have to start new threads)
now...i read through your post where you've described your problem very nicely...and i couldn't see where you've tried running the olipro patch...
but since you can see SPL as 1.10.olip in bootloader mode i'm assuming you tried that...
now if the phone is bricked then it probably means you phone is the new gene...
all you have to do is run mtty exactly as it is explained in the thread...you just have to get the driver given in the tools zip file...
as you mentioned that you've tried setting the driver and it didn't work...
you can try 2 things...
1> try running the same procedure from step 3 onwards on someone else's computer/laptop...(this is somethings others have mentioned working for them)
2> uninstall and reinstall windows mobile device center to get the default drivers for your phone on your comp...start your phone in bootloader mode by holding down the camera button while restarting the phone...now when you have the tricolour screen on, connect it to your comp via usb...
after your comp detects the device, open device manager and try updating the driver (download the tools zip file again just to be sure)...
after updating driver, the mtty should run perfectly...make sure you do everything in step 5 100% correctly...read the instructions over and over again just to be sure...(this is the method that worked for me...but again, as you will read everywhere here, be sure to do it correctly...no one on this site is responsible for any problems you'll have with your device)
if you have any doubts or problems in getting it to work...post it up in detail like you've done here
Sorry .. my bad
BUT like I said ... I am a complete newbie here
I wanted to ask ... should I repost my problem in the Q&A or will the moderator move it
I will try it on other computer ....
thanx for your help
yes, I actually used Step 4: Use the Olipro method first.
thats why bootloader mode is on ...
but after that comes the problem
since the drivers seem to be buggy with the x64 windows 7 just try running everything from step 5 onwards carefully...AFTER you have changed the appropriate drivers first as mentioned in step 3...
do these things on someone else's computer/laptop with a 32-bit os (x86)
i'm running the 32-bit windows 7 and i can assure you it works for both newgene and oldgene perfectly...
so next few things for you to do-
1> borrow someone's comp
2> install windows mobile device center (active sync for xp users)
3> start phone in bootloader mode and connect it via usb
4> locate it in device manager
5> change drivers for the device
6> continue from step 5 in the upgrading thread
hope it works...good luck
Problem solved .... thanx man ... thanx
forum.xda-developers.com/showthread.php?p=8519520#post8519520
After I installed a rom do not know what happened, I could not use the SD card, and I could not get into recovery mode. We tried to make root, I did step 1, but when I do step 2, does not communicate with the PC. I watched many tutorials, I managed to make SD card, but when I do step 2 for root because it can not communicate with PC. Please help me, because they are not too familiar with Android. If someone can tell me how to do step by step, what to press and where.
hi
it is being explained cleary in the below link
forum.xda-developers.com/showthread.php?p=7611168
and u dont need to comunicate with ur pc in this step2
u need to download Connecbot from the market to do this step and write the commands neaded
thanks
Ok I've tried installing it a thousand times already but every website I went to has instructions that are really vague or the language is so complicated it doesn't make sense. Will someone please post the instructions in this format.
Step 1:
Step 2:
Step 3:
I know it seems pretty elementary but I'm kind of new to Ubuntu AND android SDK. The only program I've ever used for android on my computer was Odin when I had a windows OS. Thanks.
dcaples002 said:
Ok I've tried installing it a thousand times already but every website I went to has instructions that are really vague or the language is so complicated it doesn't make sense. Will someone please post the instructions in this format.
Step 1:
Step 2:
Step 3:
I know it seems pretty elementary but I'm kind of new to Ubuntu AND android SDK. The only program I've ever used for android on my computer was Odin when I had a windows OS. Thanks.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1162858
If you have Ubuntu/Debian/Linux Mint then this should work. Just follow the first post. You'll have to manually find the udev rules for your Vibrant since the only rules I've included are for HTC phones.
I have recently gotten ubuntu working on my G2. I have ran into 3 problems though...
1) after rebooting my phone and going into terminal (to start ubuntu up) i type
"cd /sdcard/ubuntu"
then
"bootubuntu"
Which goes off without a hitch, but when i start up the VNC so i can use the GUI, i get a problem. all the commands go through but it makes a new localhost.. which gives me problems because A) i dont wanna setup a new VNC everytime i wanna use ubuntu and B) When the new localhost:2 or localhost:3 (depending on how many times i run "bootubuntu") i dont know the port its calling for or whatever information its needs for to connect to it with VNC. (to see what i mean by this look at the screenshot i took!
AND SECONDLY...
2) WHEN i can get into ubuntu (the only way ive gotten it to work is when i use it the first time) (ie. whenever i wanna use it i delete the ubuntu SD card contents and recopy them over and re-run "sh install.sh" this doesnt take long to run but it does take long to copy over 2 GB of stuff to the SD card) Which definately isnt the way its supposed to be used everytime i wanna use ubuntu. BUT BUT BUT, when i do this and it works, the keyboard inputs in ubuntu or completely screwed up! Ive yet to find the answer online so if anyone can help me this would be much appreciated, but not useful if i cant fix my first problem...
THIRDLY...
3) When i try to use USB storage after running ubuntu in VNC it simply wont connect, I have tryed and tryed again. The only way to fix this is to reboot my phone, which is when i found my problem with restarting and not being able successfully restart ubuntu without recopying the files over..
ANY HELP IS APPRECIATED!!!
This is hardly the place for this post. You would get a much better response if this was in the G2 and Desire Z Android Development Forum.
Either way, I'd say you should try creating a virtual partition on your SD card and see how that works out.
will do, mods, please delete this post!
Posting your thread in General, Q&A AND Dev will not get your results. It will get you banned.
I have tried to install KFU v0.9.3, but i get a command message stating that not recognised as an internal or external command. How can i fix this to allow the installation of KFU? I using XP if that helps
Thanks
oh so very vague.... try following the steps carefully 1 by 1 and you'll get it done.
which step are you currently on of the guide your trying to follow, and if you could link to it
Thanks Zothes, the guide im following is this
youtube.com/watch?v=AZ88CYWv0FU
So im pretty much at the first step, where i need to install Kindle Fire Utility to my PC, but the command screen flashes up stating 'and is not recognised...
Apologies for being vague, let me know what other details you require
what is not recognized, which command?
do you have the KFU opened or are you unable to install the drivers?
'and' is not recognised, im unable to install the drivers
i suggest you search through this thread