Database Users

New method for installing XP

Hi all.
This is another method for installing windows XP on the Shift. It uses WPI (Windows Post Install) for running every installation in sequence, so it should be easier for everybody.
Most steps have been simplified, so hopefully you only have to press a lot of buttons, and you'll end with an almost perfect XP installation.
Download this:
http://www.filefactory.com/file/ca737a/n/WPI_exe
Follow these steps:
1.- Install Windows XP Tablet, or plain Windows XP and use the TabletPCPatch. Take out SD card.
2.- Execute WPI.exe, decompress to C: (type c: and enter)
3.- Execute c:\WPI\wpi.hta
4.- In the applications list that appears, select OmniPass if you wan to use the fingerprint reader and ActiveSync, then click on "Begin Install"
5.- Chipset: next, yes, next, next, finish with reboot.
6.- VGA: next, next, yes, next, next, finish with reboot. Add resolution to registry, yes, yes.
7.- EC Driver: next, finish.
8.- TouchScreen: next, next.
Next and follow trough the three windows of "new hardware found", before rebooting!. Finish with reboot the Touch Screen Driver.
9.- TouchPad: next, next, next, finish with reboot.
10.- FingerPrint: next, accept, next, next, next, install, finish.
11.- Audio: press any key, next, DON'T REBOOT, finish, press any key.
12.- USB Lan: finish.
13.- WLAN: Drivers are copied to c:\wlandrivers, install from there when you are asked for them later.
14.- CYGWIN: next, "install from local directory", next, next, next, click the + sign next to "devel" and click on the word "skip" of the line "ioperm" so that "0.4-1" appears, next, deselect both icons creation, finish.
15.- HSECT: nothing to do here.
16.- BAT Files: Add batfiles to registry, yes, Ok.
17.- Astray: nothing to do here.
18.- SwapResolution: Add swapResolution to registry, yes, Ok.
Let it reboot after 20 seconds.
Now it usually asks about the WLAN drivers, see step nr. 13.
If it asks about drivers for Windows Mobile, just answer yes until it finishes.
Thanks to DeVictoria for the SwapResolution and the rest of you for adding comments.

Thanks for the step-by-step guide dproldan

Hi! Thank you very much for this post!!!
Just an information... Where can I find Windows Xp Tablet???
I have no external cdrom, can I run the installation of Windows Xp Tablet from USB key? How can I do???
Sorry but I'm at a very low level!!!!
Thank you!!!!
Beppe

I cant manage how to run BT/WF.
Its just doesent work. Cygwin seems to be ok, but when i want to run HSECT it shows that some dll is missing, or just disappearing.
I've managed how to install and run bluetooth correctly, but i cant install drivers for Wi-Fi.
"Device cannot start (CODE 10)"
Same stuff with sound. I have only Bluetooth Sound, nothing more.
And i cannot switch to SnapVue.

hi, i install windows xp tablet Pc edition 2005 english version,
step and step follow the new method for installing xp ,
it's ok but wifi ,
in device manager ,marvell sd8686wireless LAN SDIO Adapter #3 is yellow mark, and i can't use it ,
some thing wrong with me?
how can i star up the wifi for internet?

Thanks for the WinXP easy install process. I got everything working trying this package.
To get Wifi working, you have to copy the "copy HTC Shift XP Drivers\WLAN\sdbus.sys to c:\windows\system32\drivers\ say yes to the replace dialog and reboot."
DO THIS IN SAFE MODE ONLY. This is how I got mine to work. I had the same problem with the yellow and not working wifi code 10 in the device manager.
If you copy this without in safe mode, it will not work because after the reboot the system will replace the overided version with the old one again.
thatboyp
'

yes..u re rite.. but in normal windows mode...the sdbus.sys also can be moved.
the overwrite sdbus.sys make the SD card SDHC no functioning.
on the contrary, if i update the sdio driver ...i mean overwrite the sdbus.sys the SDHC card 4g above will work but the wifi lan will not work.
we gona have the driver which works with these two functions

This automated driver installation is great help & instructions are very clear.
Many thanks to dproldan for all the hard work and excellent finish.
However, i had big issues to get wi-fi work but in the end removing the battery and then after that running turn WF on helped.
MAYBE REMOVING BATTERY HELPS WITH WI-FI ISSUE !!
i don't know if this helps but maybe next time:
- check in Vista that wi-fi is turned on
- do all the installing
- if wi-fi not working: remove battery and put it back
- then run WF on
- marvel appeared in device manager with yellow exclamation
- upgrade drivers from c:\wlandrivers
hth

Hallo,
thats perfect. Many Many thanks.

I've finally installed XP using the above WPI method which is fantastic - Many thanks for everyone's effort on it. I was very surprised that both BT and WiFi worked with no extra input or fiddling from me YAY!
BUT my touchscreen wouldn't work as the TabletPC patch doesn't self install and the instructions didn't state this. Luckily I found instructions elsewhere (it unzips to c:/temp and you have to manually run step1 and step2 the reboot) and now it's all working and super speedy compared to Vista.

Has anybody succeeded activating like all chipsets when going with Windows XP Tablet PC SP3 ?
as far as I know using XP involves the following inconvenience:
1. the touchscreen need a tweak in deactivating a HID driver to fully work (working to remove that)
2. making the WiFi work disables the SD Card port => if WiFi then no_SDcard !BIG PROBLEM! (solved by going to sleep then start up - original files, don't replace anything)
3. 800x480 resolution only => can't find any program to make "see" all resolution BUT " MultiRes " could change IF would be available ! !QUITE BIG PROBLEM! (working on it)
4. no native portrait look => try " iRotate " to rotate
5. can't program right upper buttons for exec'ing needed commands (such a Control Panel) (working on it - think I found something)
? I tend to use the latest available drivers, not the ones available on HTC, keeping updated is one of my fixed ideas
I tried Windows XP Pro SP3, Windows XP TabletPC 2005 SP3, Windows Vista and Windows 7... I recommend Windows XP TabletPC 2005 SP3 for advanced users and Windows 7 for the world ON HTC SHIFT, not for pc or else...
If someone has any good and updated instructions set for installing Windows XP TabletPC 2005 SP3... please let me know, the genuine part I have already taken care of, I'm talking more about the drivers and all of that for all to work well, and I need XP for development, Windows 7 is not ready to be low-level programmed and is not suitable for me.
I'm not saying XP is better, I run Windows 7 on my main desktop because is quite powerfull and there's nothing I can't do on it, BUT I need XP for my beautifull Shift, it do think it more suitable
UPDATE ! After I installed Windows XP Tablet PC 2005 SP3, did Windows Update, restart... and discovered a bug wich allows us to use the WiFi without modifying no file, just go to sleep-mode and then start the device, all chipsets are going ok, I'm using a 16GB SDHC Silicon card, using wireless, bluetooth and all what I need... NO hacking required, looks like there's a exploit in power management's sleep mode... that's better for me, for now at least than giving up to SDslot for WiFi... so sleep -> wake, and you're ON !
Update 2: given up and going for Windows 7 which really makes a difference for touchscreen use

samstables said:
I've finally installed XP using the above WPI method which is fantastic - Many thanks for everyone's effort on it. I was very surprised that both BT and WiFi worked with no extra input or fiddling from me YAY!
BUT my touchscreen wouldn't work as the TabletPC patch doesn't self install and the instructions didn't state this. Luckily I found instructions elsewhere (it unzips to c:/temp and you have to manually run step1 and step2 the reboot) and now it's all working and super speedy compared to Vista.
Click to expand...
Click to collapse
Hi Samstables,
I strongly need your help here for installing the TabletPC patch on WinXP.
I followed your steps for installing the TabletPC patch and I did not manage to have the Input Panel working. I can see it while booting Windows but I cannot call it from the taskbar icon.
In the above post you mentioned Step 1 and Step 2, then reboot and so I did it. What about step 3?
What is the size of the patch you used, it's important to know as I might have downloaded a damaged patch.

tanks tanks tanks!
Very good, but i have a problem:
if i reeboot then i don't have wifi.
I must remove from device manager the sdio card reader and then refresh the wifi and the card running.
PS: excuse me for my english

WPI_exe file no longer exist
Hi all,
I just got HTC shift and decide to install WinXP for faster response
Find this thread, but link for WPI below is dead
Can anybody reupload this file?
Thank's
http://www.filefactory.com/file/ca737a/n/WPI_exe

I have looked everywhere and tried everything - Windows 7 WILL NOT connect to my HD2

I have tried changing the fast sync option
I have removed everything from the computer and re-installed.
I have hard reset my HD2.
I have restored my computer to before i bought the HD2 and let windows figure out that it needs to install WMDC - then let it download itself and install it.
I have tried every USB port on my computer and also bought a powered USB hub and tried that.
After all installs it just simply wont let me make a partnership or anything.
I don't know what to do anymore. I WANT ME SOME NEW ROMS!!!! please help me out. Other than things to get Windows 7 to work - is there a way to flash hardSPL2 / roms without USB?
I appreciate any help given and i have searched the forums here and all over the net. If i missed that one special trick that my computer needs i do apologize.

slowestcivic said:
I have tried changing the fast sync option
I have removed everything from the computer and re-installed.
I have hard reset my HD2.
I have restored my computer to before i bought the HD2 and let windows figure out that it needs to install WMDC - then let it download itself and install it.
I have tried every USB port on my computer and also bought a powered USB hub and tried that.
After all installs it just simply wont let me make a partnership or anything.
I don't know what to do anymore. I WANT ME SOME NEW ROMS!!!! please help me out. Other than things to get Windows 7 to work - is there a way to flash hardSPL2 / roms without USB?
I appreciate any help given and i have searched the forums here and all over the net. If i missed that one special trick that my computer needs i do apologize.
Click to expand...
Click to collapse
i dont know if its related but i have read that sometimes its the anti virus at fault (notably KASPERSKY)

slowestcivic said:
I have tried changing the fast sync option
I have removed everything from the computer and re-installed.
I have hard reset my HD2.
I have restored my computer to before i bought the HD2 and let windows figure out that it needs to install WMDC - then let it download itself and install it.
I have tried every USB port on my computer and also bought a powered USB hub and tried that.
After all installs it just simply wont let me make a partnership or anything.
I don't know what to do anymore. I WANT ME SOME NEW ROMS!!!! please help me out. Other than things to get Windows 7 to work - is there a way to flash hardSPL2 / roms without USB?
I appreciate any help given and i have searched the forums here and all over the net. If i missed that one special trick that my computer needs i do apologize.
Click to expand...
Click to collapse
I had the same problem with Win 7, however when I unchecked the faster connection option on HD2 it connected, although in Win7 it had a red x in mobile connection, but on the HD2 a connection had been established.

is formatting your PC an option?

Firewall?
I have three Windows 7 machines (32 & 64) and all connect without any problem. Disconnect from your internet connection. Turn off your anti-virus and firewall and give it a shot. Do you get the window that asks how you want to connect when you plug in your cable? Do you have a functioning cable? Just because it charges does not mean it will connect for data. Will it connect to an XP machine?

slowestcivic said:
I have tried changing the fast sync option
I have removed everything from the computer and re-installed.
I have hard reset my HD2.
I have restored my computer to before i bought the HD2 and let windows figure out that it needs to install WMDC - then let it download itself and install it.
I have tried every USB port on my computer and also bought a powered USB hub and tried that.
After all installs it just simply wont let me make a partnership or anything.
I don't know what to do anymore. I WANT ME SOME NEW ROMS!!!! please help me out. Other than things to get Windows 7 to work - is there a way to flash hardSPL2 / roms without USB?
I appreciate any help given and i have searched the forums here and all over the net. If i missed that one special trick that my computer needs i do apologize.
Click to expand...
Click to collapse
Have you tried a different usb cable? That's the only other thing I can think of that might be the problem.

HD2 on Windows 7 Ultimate
Hi
Had the same problem, and it turned out that the USB-cable i used, was the problem.
I used the cable that followed the 12v Car Charger, and that did no good, so I went and got the cable that came in the package (chargercable) and then it was Christmas and halloween alltogether.
Works like a charm!

@djchubbs yes i have turned that off as well - along with windows firewall
@ozkaya - no formatting my pc is not an option
@johnboatcat - When i plug it in the phone instantly asks me what kind of connection i want (file transfer or active sync with the checkbox option for faster sync as well). It transfers files just fine in file transfer mode as well.
@zarathustrax i have not tried a different USB cable as i dont have access to one. I doubt something is wrong with mine however i will have to see if i can get one somewhere.
@kongsvada Only cable i have is the one that came in the box factory from HTC
Again thank you for all the replies! I really really am trying to get this to work. I have my home computer which i do everything on but i tried my friends laptop today - it has the same exact build of windows 7 on it as my home computer (if that matters) and it will not sync or let me make a partnership or anything. I plugged it in, it downloaded WMDC and installed etc, restarted the computer and plugged it in, went to active sync mode and WMDC or the sync center do not recognize it at all. Since i cant find it in sync center i cant create a partnership.

slowestcivic said:
I have tried changing the fast sync option
I have removed everything from the computer and re-installed.
I have hard reset my HD2.
I have restored my computer to before i bought the HD2 and let windows figure out that it needs to install WMDC - then let it download itself and install it.
I have tried every USB port on my computer and also bought a powered USB hub and tried that.
After all installs it just simply wont let me make a partnership or anything.
I don't know what to do anymore. I WANT ME SOME NEW ROMS!!!! please help me out. Other than things to get Windows 7 to work - is there a way to flash hardSPL2 / roms without USB?
I appreciate any help given and i have searched the forums here and all over the net. If i missed that one special trick that my computer needs i do apologize.
Click to expand...
Click to collapse
OK, let me help you on this if flashing a new ROM will be your immediate task.
1) Just download the ROM that you like and rename it to LEOIMG.nbh
2) Make sure you've HSPL your LEO first.
3) Copy the renamed file into the root of your memory card.
4) Press the VOL down button simultaneously while turning ON your LEO.
5) Just follow the onscreen instructions on your LEO.
6) That's it.
the only problem that I can sense for you now is to HSPL your device because it does require connection with your PC. To bypass this connection with PC thing, do this;
a) Turn OFF your LEO.
b) Turn ON while pressing the VOL Down button together and it will enter the bootloader mode (TRICOLOR Screen).
c) At the bottom of your LEO, it will says "serial"
d) Now, connect the cable to your LEO and and your PC, the words will change to "Usb"
e) Let your PC do its work by installing the necessary driver automatically.
f) When it is done, run the HSPL program your PC. You can download it from this wonderful forum (Please search for it in the ROM development section)
g) Let the program finish and you can see something on your LEO screen in the process. Just look at it and let it finish. DO NOT TURN OFF YOUR LEO (I don't want you to brick your device).
h) When everything is done, reset your LEO and this time press the VOL Down button. This is to go back to the bootloader mode and to check whether the HSPL has been install correctly.
i) then go back to the steps (1 to 6) above to flash your new ROM.
Enjoy,
please post your result and help others too.
regards,
morisa

I had the same problem with my new computer which happend to be running windows 7 (everything was fine on my old xp machine). After much searching and trouble shooting the problem eventually came down to a setting on the motherboard (something to do with the p55 chipset). After I'd turned the c-state option on in the bios I've had no further issues.
It's a long shot but perhaps it will help you too

ok this sounds promising - i will try it this weekend when i have the time - i greatly appreciate the help and i will post results to let everyone know!
thank you all and like i said - will be trying your way soon mmorisa!

I had to change a registry setting on Windows 7 to get it to connect to my HD2... Of course I cant remember the setting, it may be this one
forum.xda-developers.com/showpost.php?p=3942556&postcount=7

mmorisa said:
OK, let me help you on this if flashing a new ROM will be your immediate task.
1) Just download the ROM that you like and rename it to LEOIMG.nbh
2) Make sure you've HSPL your LEO first.
3) Copy the renamed file into the root of your memory card.
4) Press the VOL down button simultaneously while turning ON your LEO.
5) Just follow the onscreen instructions on your LEO.
6) That's it.
the only problem that I can sense for you now is to HSPL your device because it does require connection with your PC. To bypass this connection with PC thing, do this;
a) Turn OFF your LEO.
b) Turn ON while pressing the VOL Down button together and it will enter the bootloader mode (TRICOLOR Screen).
c) At the bottom of your LEO, it will says "serial"
d) Now, connect the cable to your LEO and and your PC, the words will change to "Usb"
e) Let your PC do its work by installing the necessary driver automatically.
f) When it is done, run the HSPL program your PC. You can download it from this wonderful forum (Please search for it in the ROM development section)
g) Let the program finish and you can see something on your LEO screen in the process. Just look at it and let it finish. DO NOT TURN OFF YOUR LEO (I don't want you to brick your device).
h) When everything is done, reset your LEO and this time press the VOL Down button. This is to go back to the bootloader mode and to check whether the HSPL has been install correctly.
i) then go back to the steps (1 to 6) above to flash your new ROM.
Enjoy,
please post your result and help others too.
regards,
morisa
Click to expand...
Click to collapse
This worked great! I knew about bootloader screen, i knew i could flash from the SD card but i didn't know how to put them together. Thank you very very much for the help, now off to flashing roms!
One simple - probably stupid question:
I have seen TMOUS compatible on a few roms, however i will then read for that same rom that it is 576 ONLY - And then in another rom thread i see the creator of the rom say TMOUS compatible and then "TMOUS=1024". So what one is it!? just trying to be safe
Again - thank you all so much for the help - i really appreciate everyone that tried to help!
Edit: Just flashed the Evo rom to the phone, plugged it in and BAMN im able to sync with WMDC immediately - so thank you all so so much - super happy now with my 1024 leo!

slowestcivic,
I feel happy that you managed to do it and flash your favorite ROM with the guides I wrote.
at least i can see another smile from another happy LEO user.
best regards and don't forget to help others too.
mmorisa

slowestcivic said:
@djchubbs yes i have turned that off as well - along with windows firewall
Again thank you for all the replies! I really really am trying to get this to work. I have my home computer which i do everything on but i tried my friends laptop today - it has the same exact build of windows 7 on it as my home computer (if that matters) and it will not sync or let me make a partnership or anything. I plugged it in, it downloaded WMDC and installed etc, restarted the computer and plugged it in, went to active sync mode and WMDC or the sync center do not recognize it at all. Since i cant find it in sync center i cant create a partnership.
Click to expand...
Click to collapse
Also running Office 2010 beta can cause active sync issues

yeah i have 2007 outlook so that wasnt thr problem. Still not sure what was wrong with it but after flashing a new rom all is well

I had the same trouble with win7. What i did after i tryed evrything i could think of was dowloading the latest active sync from Microsoft. Restarted and plugged the phone in and it worked

explanation: PC and ZUNE cannot see ur device

if u are running windows 7 on ur PC and u have problems with ur zune cuz it cant see ur device (No device plugged), u have to plugg ur phone into ur PC and run:
1. Control panel>hardware and printers> View devices and printers
2. ull see "Unknown device" in ur Unspecified category -> that is ur phone
3. right click on "unknown device" > troubleshoot device and driver download... it will be all done automaclly so u dont have to wory.
4. after that ull see that ur device is charging, run zune again and ull see that zune now can see ur device...
5. now ur able to run ur Chevronwp7 (but maybe its better to read some posts about chevronwp7 first ) ....
i had these problems and some ppl on internet had same problems too ... i dont know if someone wrote this issues, only hope that this could help others "lost souls" like im

it is nice to see new members posting their solutions and findings rather than just problems. thanks for this!

Hi, My pc (windows 7 64bit) is struggling to find the driver, where did you get it from please?

@jase33
its good to see that Senior Members are supporting us( new, junior members) ... thx
@siobhanmt
well ... ur device should find drivers, or download them, automacly, reccomanded when u go for <troubleshoot> option, i dont know the real location of the drivers... well try some of those ... manuals .... maybe this can help u http://www.pocketpcfaq.com/faqs/wmdc/connectoverview.htm .... my post was mine solution, but if its not working for you, then u might need diferent solution :/

seams that there is more than just one problem with connecting hd2(win7) with PCs so if u find the way to deal with it, pls post, so others can see

well before it wasn't saying the driver wasn't installed at all. I have uninstalled and reinstalled zune and it now picks up I have windows phone 7. I tried to update the driver but it says have the the most up to date version, it still has an exclamation mark next to it tho?

hmm ... if drivers are installed, everything should be fine... it shouldnt be any marks by ur device. dont know what to say, i did this on lap and on desktop, both win7, everything works fine for me ...

siobhanmt said:
well before it wasn't saying the driver wasn't installed at all. I have uninstalled and reinstalled zune and it now picks up I have windows phone 7. I tried to update the driver but it says have the the most up to date version, it still has an exclamation mark next to it tho?
Click to expand...
Click to collapse
rather than update the driver, choose to uninstall it, and when it asks if you want to completely remove the driver too, choose yes. reboot everything, and reconnect the phone as if from scratch.

I've fixed it now. I replaced the sd card that originally had in my phone when I flashed it. I've reflashed it with my new sd card in and it works. I'm all up and running

[Q] please help wifi wifi not connecting, HTC says that formatted lost warranty

hello people first apologize if I posted in the wrong place, I bought a shift with a month of use still under warranty I got it yesterday, and installed windows 7 with this guide (http://forum.xda-developers.com/showthread.php? t = 513638) formatted it 4 times, did everything to the letter and sent my card over wi-fi network and not connect it up to find my network no longer connects at all, I called HTC allowed Brazil they said I lost the warranty formatted as a shift please help me I do not know what to do already formatted for desktop and notebook dozens more is the first time you step so I do not think it is hardware problem until he finds the network with optimal signal just not connecting.
note: the network is running fine on a netbook us she and ipad normal shift that not only works
I am very grateful if someone give me a light.

gleimeson said:
hello people first apologize if I posted in the wrong place, I bought a shift with a month of use still under warranty I got it yesterday, and installed windows 7 with this guide (http://forum.xda-developers.com/showthread.php? t = 513638) formatted it 4 times, did everything to the letter and sent my card over wi-fi network and not connect it up to find my network no longer connects at all, I called HTC allowed Brazil they said I lost the warranty formatted as a shift please help me I do not know what to do already formatted for desktop and notebook dozens more is the first time you step so I do not think it is hardware problem until he finds the network with optimal signal just not connecting.
note: the network is running fine on a netbook us she and ipad normal shift that not only works
I am very grateful if someone give me a light.
Click to expand...
Click to collapse
... stay calm... please.
1 - Download all HTC drivers for windows 7
2- Format the pc again
3- Install all the drivers in order AND with admin mode AND compatibility settings set up for windows vista
4- Only restart after installing ALL drivers
5- Take a beer and surf the internet.
Good Luck!

camargomaia said:
... stay calm... please.
1 - Download all HTC drivers for windows 7
2- Format the pc again
3- Install all the drivers in order AND with admin mode AND compatibility settings set up for windows vista
4- Only restart after installing ALL drivers
5- Take a beer and surf the internet.
Good Luck!
Click to expand...
Click to collapse
hello friend seems so simple, so that when I install the drives as posted on the site when I install htc (and so managed to order) the vga on the blue screen it starts i have to go into safe mode, low resolution and then pinching the resolution already there I restarted, when I install something else (Extension Kit USBLanDriver) says that windows can not install I'm trying it now (http://forum.xda-developers.com/showthread.php?t=474985)

gleimeson said:
hello friend seems so simple, so that when I install the drives as posted on the site when I install htc (and so managed to order) the vga on the blue screen it starts i have to go into safe mode, low resolution and then pinching the resolution already there I restarted, when I install something else (Extension Kit USBLanDriver) says that windows can not install I'm trying it now (http://forum.xda-developers.com/showthread.php?t=474985)
Click to expand...
Click to collapse
Let´s try something different: when w7 setup finishes, change the of windows to the classic (windows 2000 style)... it seems that aero is ****ing your umpc...

camargomaia said:
Let´s try something different: when w7 setup finishes, change the of windows to the classic (windows 2000 style)... it seems that aero is ****ing your umpc...
Click to expand...
Click to collapse
Now I bought the fight to htc clerk said I would have definitely allowed to
that he would spend about 150 dollars, I'll try to do as you said, could run anything but connect to wifi, now I'm very grateful for your help. response has so comment here.

gleimeson said:
Now I bought the fight to htc clerk said I would have definitely allowed to
that he would spend about 150 dollars, I'll try to do as you said, could run anything but connect to wifi, now I'm very grateful for your help. response has so comment here.
Click to expand...
Click to collapse
good guy did as you posted step by step comtinua only is it the same hardware problem? NOTE: The file (Extension Kit USBLanDriver) Web site does not install on htc shift. aki xda found another that worked on in his place, I'm thinking about going back to where I think his original OS files to do a restoration? as part of recovery was deleted.

gleimeson said:
good guy did as you posted step by step comtinua only is it the same hardware problem? NOTE: The file (Extension Kit USBLanDriver) Web site does not install on htc shift. aki xda found another that worked on in his place, I'm thinking about going back to where I think his original OS files to do a restoration? as part of recovery was deleted.
Click to expand...
Click to collapse
Stay calm bro. There is absolutely nothing wrong with your Shift. No need to contact HTC for now.
1. The USB extension kit has nothing to do with your original issue - Wi-Fi
2. Have you enabled Wi-fi. You know how to do this? Hit the Shift Control Centre button and then enable wifi from there.....
3. You need to install drivers
4. If all else fail start all over.
5. To re-install Windows Vista is piece of cake. Hit FN+F3 when the Shift is re-starting and you will be re-installing Vista in seconds.
6. But... Dont panic! Installing Windows 7, back to Vista, then off to 7 again and even back will not damage your device in any way.
7. Forget about the HTC people and their warranty bull****. As soon as you re-install Vista the device will be exactly the way it left the factory.....
8. You are in the right forum where the xda Community will assist you for as long as you are in need....
9. Dont Panic!!!!!
10. Dont Panic!!!

PlayStation said:
Stay calm bro. There is absolutely nothing wrong with your Shift. No need to contact HTC for now.
1. The USB extension kit has nothing to do with your original issue - Wi-Fi
2. Have you enabled Wi-fi. You know how to do this? Hit the Shift Control Centre button and then enable wifi from there.....
3. You need to install drivers
4. If all else fail start all over.
5. To re-install Windows Vista is piece of cake. Hit FN+F3 when the Shift is re-starting and you will be re-installing Vista in seconds.
6. But... Dont panic! Installing Windows 7, back to Vista, then off to 7 again and even back will not damage your device in any way.
7. Forget about the HTC people and their warranty bull****. As soon as you re-install Vista the device will be exactly the way it left the factory.....
8. You are in the right forum where the xda Community will assist you for as long as you are in need....
9. Dont Panic!!!!!
10. Dont Panic!!!
Click to expand...
Click to collapse
mind first thank the staff of the xda
ok I'm looking for windows vista business as I said before dowloading the recovery partition was deleted I will install Windows Vista Business with the drives and then upgrade to 7 except that it is very difficult to find several windows of this version's where someone would download?

gleimeson said:
mind first thank the staff of the xda
ok I'm looking for windows vista business as I said before dowloading the recovery partition was deleted I will install Windows Vista Business with the drives and then upgrade to 7 except that it is very difficult to find several windows of this version's where someone would download?
Click to expand...
Click to collapse
staff solved the problem, it was my wifi WPA2 was somehow the shift is not connected to this network type changed to wep and it worked perfect thanks for the help especially in the tips of all now I want to make calls and make it work gps

[HOW TO] Recover HARD BRICKED Nokia X2 : DOESN'T TURN ON, NO VIBRATION, NO LIGHT

So, Guys. Myself thought of writing this thread so that you can prevent yourselves from entering into danger as well as get rid of it even if you enter by mistake.
As you all know that, we are currently facing an issue of SIM offline, myself got into the trouble (as per me, when i insert a sim in sim 1, device recognizes the network provider but there is no signal. sim 2 is fine) and inorder to rectify that issue, i tried all possible ways like deleting IMEI and rewriting it, changing modem etc.
But nothing worked and so thought of using NOKIA CARE SUIT (NCS) >> Product Support Tool For Store 5
& change the firmware to Nokia X2DS RM-1013 059V782 v2.1.0.13 which was the biggest mistake which i ever committed and it resulted in hard brick.
I suggest everyone not to flash 2.1.0.13 version please
In my case, i was not even able to use the volume buttons and power button inorder to get to bootloader or custom recovery. Trust me, i'm not a noob but i do know the situation in which i'm and searched everywhere and took help of lots of guys and finally found the solution to it.
Just follow these steps:
A. Requirements:
1. Nokia Firmware - Thanks to Firmware27
2. QPST_2.7.422
3. QDLoader HS-USB Driver
B. Procedure:
1. Extract Requirement - 1, 2, 3 separately.
2. Now Install requirement - 2 & in Requirement - 3, just install Setup
3. Now connect USB to NOKIA X2 & Laptop/PC
4. Click on the start menu and type QFIL in search box and open it.
5. Under "SELECT PROGRAMMER", click on the browse button and
select "rm1013_2.1.0.13_user_prog_emmc_firehose_8x10. mbn" from the Requirement - 1
6. Under "DOWLOAD", you will find "LOAD XML" and now click on that and a window will appear infront you :silly:
7. Now in the window, type *.xml in the file name so that the xml files will show up.
8. Now select "rm1013_2.1.0.12_059V787_001_rawprogram_unsparse_ui"
9. Soon another window will show up automatically and now type *.xml in the file name so that the xml files will show up.
10. Now select "P12026702dpi600_label_layout"
11. Now Click on the "DOWNLOAD" just button below the Load XML button.
- Make sure your device is connected to the PC/lappy through cable :silly:
Everything is done. Now sit back and Relax.
Your NOKIA X2 will bootup and it looks exactly like device when you purchased except the scratches and all
Note:
I'm not responsible if your device is bricked. Ofcourse if you are doing this, it means that your device might have already been bricked and i guess there is no other way except this to make it right
This works with all the snapdragon chipset devices.

my phone just showing QHSUSB_BULK but it get warning mode, after i install that files it get qloader 9008
but when i download with qspt it get on sahara cannot working

frnsl3 said:
my phone just showing QHSUSB_BULK but it get warning mode, after i install that files it get qloader 9008
but when i download with qspt it get on sahara cannot working
Click to expand...
Click to collapse
The only prob is OS which you are using and Drivers..

Thx, its helped me

Dear,
I am also having the same issue and tried ur method . But I am not able to install the last set up u provided under 2. QPST_2.7.422. it says as "The following package files could not be found:
C:\Users\AMR\Downloads\BallardAppCraftery.CraftyFileViewer_epyrqhfctk40t!App\2. QPST_2.7.422\vcredist_x86\vcredist_x86."exe subsequently the QFIL is not downloading the .xml content. A help would be greatly appreciated.

Kuttappan555 said:
Dear,
I am also having the same issue and tried ur method . But I am not able to install the last set up u provided under 2. QPST_2.7.422. it says as "The following package files could not be found:
C:\Users\AMR\Downloads\BallardAppCraftery.CraftyFileViewer_epyrqhfctk40t!App\2. QPST_2.7.422\vcredist_x86\vcredist_x86."exe subsequently the QFIL is not downloading the .xml content. A help would be greatly appreciated.
Click to expand...
Click to collapse
if you are saying that you cannot download from the link i provided.....i just checked it. Itz working fine. i saved it in my g-drive and shared the link

Hi, I tried this and everything worked fine but phone didn't boot up. I mean the flashing worked but phone did not reboot. Screenshot attached. Do you know what is missing?

Is this method still working?

Hard Bricked
Still Working??

Can someone re-upload these files or point to the right direction?