Hi all.
This is another method for installing windows XP on the Shift. It uses WPI (Windows Post Install) for running every installation in sequence, so it should be easier for everybody.
Most steps have been simplified, so hopefully you only have to press a lot of buttons, and you'll end with an almost perfect XP installation.
Download this:
http://www.filefactory.com/file/ca737a/n/WPI_exe
Follow these steps:
1.- Install Windows XP Tablet, or plain Windows XP and use the TabletPCPatch. Take out SD card.
2.- Execute WPI.exe, decompress to C: (type c: and enter)
3.- Execute c:\WPI\wpi.hta
4.- In the applications list that appears, select OmniPass if you wan to use the fingerprint reader and ActiveSync, then click on "Begin Install"
5.- Chipset: next, yes, next, next, finish with reboot.
6.- VGA: next, next, yes, next, next, finish with reboot. Add resolution to registry, yes, yes.
7.- EC Driver: next, finish.
8.- TouchScreen: next, next.
Next and follow trough the three windows of "new hardware found", before rebooting!. Finish with reboot the Touch Screen Driver.
9.- TouchPad: next, next, next, finish with reboot.
10.- FingerPrint: next, accept, next, next, next, install, finish.
11.- Audio: press any key, next, DON'T REBOOT, finish, press any key.
12.- USB Lan: finish.
13.- WLAN: Drivers are copied to c:\wlandrivers, install from there when you are asked for them later.
14.- CYGWIN: next, "install from local directory", next, next, next, click the + sign next to "devel" and click on the word "skip" of the line "ioperm" so that "0.4-1" appears, next, deselect both icons creation, finish.
15.- HSECT: nothing to do here.
16.- BAT Files: Add batfiles to registry, yes, Ok.
17.- Astray: nothing to do here.
18.- SwapResolution: Add swapResolution to registry, yes, Ok.
Let it reboot after 20 seconds.
Now it usually asks about the WLAN drivers, see step nr. 13.
If it asks about drivers for Windows Mobile, just answer yes until it finishes.
Thanks to DeVictoria for the SwapResolution and the rest of you for adding comments.
Thanks for the step-by-step guide dproldan
Hi! Thank you very much for this post!!!
Just an information... Where can I find Windows Xp Tablet???
I have no external cdrom, can I run the installation of Windows Xp Tablet from USB key? How can I do???
Sorry but I'm at a very low level!!!!
Thank you!!!!
Beppe
I cant manage how to run BT/WF.
Its just doesent work. Cygwin seems to be ok, but when i want to run HSECT it shows that some dll is missing, or just disappearing.
I've managed how to install and run bluetooth correctly, but i cant install drivers for Wi-Fi.
"Device cannot start (CODE 10)"
Same stuff with sound. I have only Bluetooth Sound, nothing more.
And i cannot switch to SnapVue.
hi, i install windows xp tablet Pc edition 2005 english version,
step and step follow the new method for installing xp ,
it's ok but wifi ,
in device manager ,marvell sd8686wireless LAN SDIO Adapter #3 is yellow mark, and i can't use it ,
some thing wrong with me?
how can i star up the wifi for internet?
Thanks for the WinXP easy install process. I got everything working trying this package.
To get Wifi working, you have to copy the "copy HTC Shift XP Drivers\WLAN\sdbus.sys to c:\windows\system32\drivers\ say yes to the replace dialog and reboot."
DO THIS IN SAFE MODE ONLY. This is how I got mine to work. I had the same problem with the yellow and not working wifi code 10 in the device manager.
If you copy this without in safe mode, it will not work because after the reboot the system will replace the overided version with the old one again.
thatboyp
'
yes..u re rite.. but in normal windows mode...the sdbus.sys also can be moved.
the overwrite sdbus.sys make the SD card SDHC no functioning.
on the contrary, if i update the sdio driver ...i mean overwrite the sdbus.sys the SDHC card 4g above will work but the wifi lan will not work.
we gona have the driver which works with these two functions
This automated driver installation is great help & instructions are very clear.
Many thanks to dproldan for all the hard work and excellent finish.
However, i had big issues to get wi-fi work but in the end removing the battery and then after that running turn WF on helped.
MAYBE REMOVING BATTERY HELPS WITH WI-FI ISSUE !!
i don't know if this helps but maybe next time:
- check in Vista that wi-fi is turned on
- do all the installing
- if wi-fi not working: remove battery and put it back
- then run WF on
- marvel appeared in device manager with yellow exclamation
- upgrade drivers from c:\wlandrivers
hth
Hallo,
thats perfect. Many Many thanks.
I've finally installed XP using the above WPI method which is fantastic - Many thanks for everyone's effort on it. I was very surprised that both BT and WiFi worked with no extra input or fiddling from me YAY!
BUT my touchscreen wouldn't work as the TabletPC patch doesn't self install and the instructions didn't state this. Luckily I found instructions elsewhere (it unzips to c:/temp and you have to manually run step1 and step2 the reboot) and now it's all working and super speedy compared to Vista.
Has anybody succeeded activating like all chipsets when going with Windows XP Tablet PC SP3 ?
as far as I know using XP involves the following inconvenience:
1. the touchscreen need a tweak in deactivating a HID driver to fully work (working to remove that)
2. making the WiFi work disables the SD Card port => if WiFi then no_SDcard !BIG PROBLEM! (solved by going to sleep then start up - original files, don't replace anything)
3. 800x480 resolution only => can't find any program to make "see" all resolution BUT " MultiRes " could change IF would be available ! !QUITE BIG PROBLEM! (working on it)
4. no native portrait look => try " iRotate " to rotate
5. can't program right upper buttons for exec'ing needed commands (such a Control Panel) (working on it - think I found something)
? I tend to use the latest available drivers, not the ones available on HTC, keeping updated is one of my fixed ideas
I tried Windows XP Pro SP3, Windows XP TabletPC 2005 SP3, Windows Vista and Windows 7... I recommend Windows XP TabletPC 2005 SP3 for advanced users and Windows 7 for the world ON HTC SHIFT, not for pc or else...
If someone has any good and updated instructions set for installing Windows XP TabletPC 2005 SP3... please let me know, the genuine part I have already taken care of, I'm talking more about the drivers and all of that for all to work well, and I need XP for development, Windows 7 is not ready to be low-level programmed and is not suitable for me.
I'm not saying XP is better, I run Windows 7 on my main desktop because is quite powerfull and there's nothing I can't do on it, BUT I need XP for my beautifull Shift, it do think it more suitable
UPDATE ! After I installed Windows XP Tablet PC 2005 SP3, did Windows Update, restart... and discovered a bug wich allows us to use the WiFi without modifying no file, just go to sleep-mode and then start the device, all chipsets are going ok, I'm using a 16GB SDHC Silicon card, using wireless, bluetooth and all what I need... NO hacking required, looks like there's a exploit in power management's sleep mode... that's better for me, for now at least than giving up to SDslot for WiFi... so sleep -> wake, and you're ON !
Update 2: given up and going for Windows 7 which really makes a difference for touchscreen use
samstables said:
I've finally installed XP using the above WPI method which is fantastic - Many thanks for everyone's effort on it. I was very surprised that both BT and WiFi worked with no extra input or fiddling from me YAY!
BUT my touchscreen wouldn't work as the TabletPC patch doesn't self install and the instructions didn't state this. Luckily I found instructions elsewhere (it unzips to c:/temp and you have to manually run step1 and step2 the reboot) and now it's all working and super speedy compared to Vista.
Click to expand...
Click to collapse
Hi Samstables,
I strongly need your help here for installing the TabletPC patch on WinXP.
I followed your steps for installing the TabletPC patch and I did not manage to have the Input Panel working. I can see it while booting Windows but I cannot call it from the taskbar icon.
In the above post you mentioned Step 1 and Step 2, then reboot and so I did it. What about step 3?
What is the size of the patch you used, it's important to know as I might have downloaded a damaged patch.
tanks tanks tanks!
Very good, but i have a problem:
if i reeboot then i don't have wifi.
I must remove from device manager the sdio card reader and then refresh the wifi and the card running.
PS: excuse me for my english
WPI_exe file no longer exist
Hi all,
I just got HTC shift and decide to install WinXP for faster response
Find this thread, but link for WPI below is dead
Can anybody reupload this file?
Thank's
http://www.filefactory.com/file/ca737a/n/WPI_exe
Related
hello!
i just installed a fresh new copy of Windows Vista x86 Build 5600 and I've realized that Windows Mobile Device Center isn't installed.
I've searched and at Microsoft I've downloaded a file: drvupdate-x86.msi which appears on Control Panel as Windows Mobile Device Center Driver Update!
Well, It's not the program, is it??? I instalde Driver Update but I don't seem to install the Program at all!
I've searched on XDA and I've found some tips, which I've tried with no result!
Add Key to registry at HKLM\Software\Microsoft named WHOS. it's supposed when I plug USB cable to PC and Universal, appear on Windows upgrade saying there is a new upgrade available. Doesnt appear!
I've seen a topic saying:
"...Yes I have it working with both USB / BT :=)
Try this procedure.
1. Download this file.
http://www.download.windowsupdate.co...bc9 4587a.exe
2. Extract it using winrar.This will give you a file "wmupdate.msi"
3. Now be sure to logon to Vista as the built in admin and run "wmupdate.msi" and after that reboot and again login as built in admin, let it complete the install.
4.Login as your regular user, connect you phone and all should work:=)"
Downloaded the file and done all right but I dont seam to make it work!
I've ONCE installed WMDC with no errors but the device appeared "NOT CONNECTED".
Now, after a NEW fresh instalation, I cant even install WMDc!
Please help!
I would like to keep vista installed, but without sync there's no way!!!!
Deiota
hi
here i m writing the steps necessory to run upgrade utility on vista. You need to do this only once.
1. install some zipping utility like WINRAR.
2. Right click on the setup file of activesync 4.5.
3. Extract activesync 4.5 on any location.
4. Run Windows Mobile Device Center and click on Connection Settings.
5. Uncheck the Allow USB Connections and click OK.
6. Run task manager and go to services tab and check the services 'Windows
Mobile-based connectivity' and Windows Mobile 2003-based connectivity'
are started. If not, click the services button at bottom and go to next pop
up page.
7. Click the service name and press the 'play' button on the top bar.
8. Start Device Manager.Expand the 'Mobile devices' section and click
the 'HTC USB Sync.
9. Right Click and Update Driver Software.
10. Click 'Browse my computer for driver software on pop up screen.
11. Click Let me pick from a list of device drivers on my computer.
12. Click Have Disk.
13. Click 'Browse', and browse to the location where you extracted the
activesync 4.5 in 3rd step.
14. Double click wceusbsh.inf.
15. Select HTC USB Sync from the list and click Next.
16. Finish the installation process.
17. Run Task Manager Then find the WMDC.EXE and click End Process.
18. Now run the update utility and done ur update.
19. when you want to start syncing normally again run Windows Mobile
Device Center enable the allow USB connection as you disabled in step 5.
It's not correct! ...if i Uncheck the Allow USB Connections the device is not present in the list ...
The drivers not recognized by Vista....
Have you a solution?
NikitaSor said:
It's not correct! ...if i Uncheck the Allow USB Connections the device is not present in the list ...
The drivers not recognized by Vista....
Have you a solution?
Click to expand...
Click to collapse
put ur phone in bootloader and cradel it u will see vista will detect it.
There are simple instructions here:
http://forum.xda-developers.com/showthread.php?t=291723&highlight=vista
Have you ever heard about the wiki?
Vista must die today!!!!
If only new users spend some time reading wiki, everything is there... When I had to upgrade using windows vista, it worked the first time... I just read and follow the step by step instruction from wiki...
Thanks, it's work!!!
Dangit, I can get these upgrades to work when I'm at work on an XP machine, but I can't for the life of me get it to work on my home Vista 64bit machines. And yes, I HAVE read the wiki, and this post, and that post and many other posts that all give the same directions.
Disabling driver signature enforcement on the 64bit driver doesn't do any good either. It gives an error trying to install the driver.
You just gotta love computers. A ton of people can get something to work, and then a person that programs for a living will come along and can't get it to work. Makes you feel like a total goober. *sigh*
Maybe I have an old XP machine gathering dust in storage somewhere. *grumble*
i've reduced the vista partition and want to install xp....but after the first reboot , there are a black screen with "error to load operative system". someone have tested a dual boot vista xp???
thx
problem solved....
after winxp 1° phase installation reinsert vista cd,repair your computer->command prompt->
Bootrec.exe /fixMBR
Bootrec.exe /fixBoot
restart vista
install EasyBCD at http://neosmart.net/dl.php?id=1
add bootloader entry for xp.
restart and select new winxp entry on bootloader,
continue xp installation!!!
yep, i'm doing dual boot since i've got the shift from day 1.
here's some tips:
never install both operating systems on the same partition. It will most likely crash both of them (more possibly the xp one).
When dualbooting you need the following things.
a windows installation disk and an external usb dvd driver.
a windows vista instalation disk.
a shift.
some 3-4 spare hours.
First you should have a working vista instalation (this will be one of the 2 os's you wanna put). All your settings and files will be unaffected.
you will need to partition the drive by whatever means in order to make an empty 4-5 gb partition, separated from the other one(s).
Next install windows xp using the external cd drive just as you would install it normally. Install it to that empty partition.
After you finish you will see that only the xp OS boots, no sign of vista.
Next boot the vista cd when you start the shift, then select "repair your computer", or stuff like that from the first menu that appears when installing vista (after the language and keyboard stuff). You should fix the bootloader, there should be an option related to that, maybe troubleshoot vista startup (or something similar). Next remove the cd after the repair is done and reboot from hard-disk.
Now only vista boots up. Boot to vista then download a program called easybcd. You may find it on google it's free. With this program you can acces the vista bootloader. You need to add an entry for your xp instalation in order to have it displayed at bootup. Find the "add entry" option (or similar) select windows xp, 2000, etc from one of the pull down menus, and you'll see that the drive letter containing the instalation will be greyed out (the selected drive is C. That's ok, altrough xp installed on another partition, it's bootloader and some files are still located on the C: drive. now tweak whatever you like with the easybcd program then save changes and restart.
You should have dual booting now.
err.. one more tip, when you shut down vista, just before you want to boot from cd and install xp (the begining of the procedure) use the shag controll and activate bluetooth, wlan and modem. This way when you install xp, it will detect them (at least bluetooth, wlan doesn't seem to work however), otherwise - naah.
aa, didn't saw your post. I was writting mine
Glad to see the problem solved.
Has anyone had any success with making a bootable USB stick with Vista on it?
Hello all.
I will update these instructions as needed.
With these instructions you can install any version of windows XP, SP2 or SP3. It doesn´t need to be a tablet edition. I recommend using a lite or optimized version.
As far as I know, only two things are not working, resolution changer and tablet input panel. Both will be fixed soon.
You have to install Activesync too if you want to access the other half of your Shift.
Thank you to all the people who contributed on the other thread!
Enjoy!
1.- Download and save to a USB disk drive:
http://www.filefactory.com/file/fa3eb2/n/drivers_shift_XP_rar
and https://phatpipez.homeftp.org/HTCShift/Shift/TabletPC_PatchXPproSP2.exe
or http://torrents.thepiratebay.org/4449594/drivers_shift_XP.rar.4449594.TPB.torrent
Be sure to extract the rar file before starting or have a unrar program installer available, you cannot extract rar files on a newly installed windows XP!
2.- Install XP. Use your own version in your own language!
Choose same disk and fast NTFS format. Use the administrator account for now.
Let it finish ignoring any message about the screen format, etc
3.- Eject CD-Drive
Insert USB pen drive
4.- Run HTC Shift XP Drivers/Chipset/infinst_autol.exe next, next, next… reboot when finished.
5.- run HTC Shift XP Drivers/VGA/win2k_xp14324.exe next, next, yes, next, next, reboot when finished.
6.- run TabletPC_PatchXPproSP2.exe, it will extract files to C:\temp,
Go to C:\temp and run step1.reg,
Run Step2.bat
Leave it alone until de hard disk stops and reboot
7.- Run HTC Shift XP Drivers\VistaECDrvV1[1].0.1.10\setup.exe from the folder
8.- Run HTC Shift XP Drivers\TouchScreen(1[1].1.0.2)\ATSV1102(WHQLed).exe next,next, next and reboot when finished.
9.- run HTC Shift XP Drivers\Synaptics MicroPad(10[1].0.11.1)\setup.exe , reboot when finished.
10.- run HTC Shift XP Drivers\Audio\WDM_R195\setup.exe , reboot when finished.
11.- run HTC Shift XP Drivers\fingerprint\setup.exe .
12.- run HTC Shift XP Drivers\omnipass 5.0\setup.exe. Reboot when finished.
13.- run HTC Shift XP Drivers\USB LAN\setup.exe .
14.- run cygwin\setup.exe, and select install from folder. select ioperm from the devel subfolder.
Unselect icons on desktop and start menu and finish.
Run cygwin.bat from c:\cygwin
type “ioperm –i” + enter and “exit” + enter
move hsect-2.1\hsect2.exe and move it to c:\cygwin\bin
15.- move the bat files from \archivos bat\ to the desktop.
16.- Run BT on.bat from your desktop and let windows install its own drivers
17.- run WF on.bat from your desktop and cancel the windows installation.
18.- copy HTC Shift XP Drivers\WLAN\sdbus.sys to c:\windows\system32\drivers\ say yes to the replace dialog and reboot.
19.- Install the WLAN drivers , from the hardware manager, right button over marvell SDIO… update driver, and select the HTC Shift XP Drivers\WLAN folder.
Thanks for the step-by-step guide dproldan! I have a couple questions:
- What is left out as far as functionality with the XP install compared to Vista or will everythign work as far as the camera, control center buttons, etc...
- Any hopes soon for resolution changer and tablet input panel functioning?
- Without the mobility center built-in Vista, is the conenction to snapview done just via active sync?
- Download link for TabletPC_PatchXPproSP2.exe does not work and torrent has absolutely no availability. Any alternatives?
Thanks again!
Thanks Great
This is what we needed good job again thanks.
Hope sombody do the same with the flash rom to get the gps etc.
The shift is getting better and better
VeEuzUKY said:
- Download link for TabletPC_PatchXPproSP2.exe does not work and torrent has absolutely no availability. Any alternatives?
Thanks again!
Click to expand...
Click to collapse
This link works https://phatpipez.homeftp.org/HTCShift/Shift/TabletPC_PatchXPproSP2.exe
other files https://phatpipez.homeftp.org/HTCShift/Shift/
Hope that helps
Aardvark1978 said:
This link works https://phatpipez.homeftp.org/HTCShift/Shift/TabletPC_PatchXPproSP2.exe
other files https://phatpipez.homeftp.org/HTCShift/Shift/
Hope that helps
Click to expand...
Click to collapse
Thanks so much Aardvark1978!
CRC failed in Temp\TABLETPC\l1033.dlm
Which drivers are for the G3 modem? I dont see them in the XP Drivers pack, or, are they built-in in XP already?
Also, any luck now or in the future to make the GPS work under XP?
VeEuzUKY said:
Which drivers are for the G3 modem? I dont see them in the XP Drivers pack, or, are they built-in in XP already?
Also, any luck now or in the future to make the GPS work under XP?
Click to expand...
Click to collapse
You can use the 3G modem with USBTool and internet sharing programs from the windows mobile side, the RNDIS drivers are installed automatically the first time you connect.
GPS works fine on XP using franson GPSGate and activesync.
kaspersky said:
CRC failed in Temp\TABLETPC\l1033.dlm
Click to expand...
Click to collapse
Probably a corrupted download. try again.
dproldan said:
Probably a corrupted download. try again.
Click to expand...
Click to collapse
downloaded again. now it's ok. tnx
If I install XP on my Shift...
Will things still be controlled in SnapVUE?
I say this because my audio is dead, because snapvue is dead--if I install XP will sound be dead or does installing XP Usurp Snapvue?
Here's some comments surrounding these questions.
1. Your SnapVue must be Liberated to use 3G for XP.
2. You must install ActiveSync on XP
3. Go into SnapVUe and open USB Tool and "Attach to Vista"
4. Active sync will start.
5. Once connected/sync'd go to Snap Vue, Programs, Internet sharing. XP will find the network sharing connection and set it up
6. You now have 3G on XP
ultraman982 - why not ressurect SnapVue or is it totally screwed? HTC have the clear SnapVue tool which I have used successfully...turned it back to normal. I have had nil sound issues.
In fact, to get things as clean as possible I did an Fcn F3 for Vista, cleared SnapVue then started from there. Good to start with a clean base.
dproldan said:
Hello all.
As far as I know, only two things are not working, resolution changer and tablet input panel. Both will be fixed soon.
18.- copy HTC Shift XP Drivers\WLAN\sdbus.sys to c:\windows\system32\drivers\ say yes to the replace dialog and reboot.
Click to expand...
Click to collapse
Good work ! Very Well !!!
Only 2 notes :
1- what about right buttons ?
2- i must entered by recovery console for copying sdbus.sys, otherwise XP put in \system32\drivers an older version of this file.
Sorry for my bad English - I love spaghetti & pomodoro !
kaspersky said:
1- what about right buttons ?
2- i must entered by recovery console for copying sdbus.sys, otherwise XP put in \system32\drivers an older version of this file.
Click to expand...
Click to collapse
-right buttons work as expected, keep the stilus pressed until a mouse icon appears
- I didn't have to do anything with the recovery console, but I used an optimized version. I'll update the instructions if more people report the same problem.
no mouse right button
two buttons on the right of shift.
Nice job!
Thanks for sharing. Now I get it
I'm stuck with the cygwin part of the installation. Can anybody help me please with a more detailed instruction on how to insert the ioperm command? When I download the whole cygwin thing from the download source it seem gigantic. Do I need all this?
tagesschau said:
I'm stuck with the cygwin part of the installation. Can anybody help me please with a more detailed instruction on how to insert the ioperm command? When I download the whole cygwin thing from the download source it seem gigantic. Do I need all this?
Click to expand...
Click to collapse
HI,
these are the steps:
1. execute setup.exe from cygwin folder + Next
2. Install from Local Directory + Next
3. In Root Directory Box: C:\cygwin (the default folder) + next
4. In the Local Package Directory box specify the directory where you have saved the CYGWIN Folder (leave the default) + next
5. In select package windows expand DEVEL and click on the work "skip" in the same line where there is IOPERM + Next
6. Unselect icons on desktop and start menu and finish.
7. Run cygwin.bat from folder c:\cygwin
8. In the cygwin windows type “ioperm –i” + enter and “exit” + enter
9. move hsect-2.1\hsect2.exe and move it to c:\cygwin\bin
Michele
Hi,
thanks a lot for your work! It is excellent!
I have installed XP Tablet Pc Edition 2005, I have not used this point:
6.- run TabletPC_PatchXPproSP2.exe, it will extract files to C:\temp,
Go to C:\temp and run step1.reg,
Run Step2.bat
Leave it alone until de hard disk stops and reboot
For this point I have restarted the PC with recovery console for copy correctly the file:
18.- copy HTC Shift XP Drivers\WLAN\sdbus.sys to c:\windows\system32\drivers\ say yes to the replace dialog and reboot.
One issue:
after I have installed all the drivers I have tried to install a Bluetooth mouse....the installation is finished ok...the mouse works...but I cannot use the touchscreen...
I have reinstalled the touch driver....all works ok...but at next reboot touch stop working...
Michele
ioperm...
thank you, sensa, for your quick reply.
When I type the command "ioperm -i" into the cygwin window I get this:
"ioperm.sys is already installed. StartService function call failed."
Any idea?
This was made by dproldan but i added a control center for bluetooth and wireless for disabling and enabling them.
With these instructions you can install any version of windows XP, SP2 or SP3. It doesn´t need to be a tablet edition. I recommend using a lite or optimized version.
As far as I know, only two things are not working, resolution changer and tablet input panel. Both will be fixed soon.
You have to install Activesync too if you want to access the other half of your Shift.
Thank you to all the people who contributed on the other thread!
Enjoy!
1.- Download and save to a USB disk drive:
http://www.filefactory.com/file/fa3eb2/n/drivers_shift_XP_rar
and https://phatpipez.homeftp.org/HTCShift/Shift/TabletPC_PatchXPproSP2.exe
2.- Install XP. Use your own version in your own language!
Choose same disk and fast NTFS format. Use the administrator account for now.
Let it finish ignoring any message about the screen format, etc
3.- Eject CD-Drive
Insert USB pen drive
4.- Run HTC Shift XP Drivers/Chipset/infinst_autol.exe next, next, next… reboot when finished.
5.- run HTC Shift XP Drivers/VGA/win2k_xp14324.exe next, next, yes, next, next, reboot when finished.
6.- run TabletPC_PatchXPproSP2.exe, it will extract files to C:\temp,
Go to C:\temp and run step1.reg,
Run Step2.bat
Leave it alone until de hard disk stops and reboot
7.- Run HTC Shift XP Drivers\VistaECDrvV1[1].0.1.10\setup.exe from the folder
8.- Run HTC Shift XP Drivers\TouchScreen(1[1].1.0.2)\ATSV1102(WHQLed).exe next,next, next and reboot when finished.
9.- run HTC Shift XP Drivers\Synaptics MicroPad(10[1].0.11.1)\setup.exe , reboot when finished.
10.- run HTC Shift XP Drivers\Audio\WDM_R195\setup.exe , reboot when finished.
11.- run HTC Shift XP Drivers\fingerprint\setup.exe .
12.- run HTC Shift XP Drivers\omnipass 5.0\setup.exe. Reboot when finished.
13.- run HTC Shift XP Drivers\USB LAN\setup.exe .
14.- run cygwin\setup.exe, and select install from folder. select ioperm from the devel subfolder.
Unselect icons on desktop and start menu and finish.
Run cygwin.bat from c:\cygwin
type “ioperm –i” + enter and “exit” + enter
move hsect-2.1\hsect2.exe and move it to c:\cygwin\bin
15.- Download the HTC Control Center
http://www.mediafire.com/?amzome1lmmn
16.- Click on WIFI on then and cancel the windows installation.
17.- copy HTC Shift XP Drivers\WLAN\sdbus.sys to c:\windows\system32\drivers\ say yes to the replace dialog and reboot.
18.- Install the WLAN drivers , from the hardware manager, right button over marvell SDIO… update driver, and select the HTC Shift XP Drivers\WLAN folder.
Plzzzz
at least tell me if it works with you
or if there is a problem with it.
good job....Now we have to add a light pictures for activated device and a link for control manager button....
for this i've read the switchresolution .reg and change it but from:
[HKEY_CURRENT_USER\Software\Synaptics\SynTP\TouchPadPS2]
"ExButton2PlugInID"="SynTP"
"ExButton2Action"=dword:00000000
"ExButton2PlugInActionID"=dword:00000005
[HKEY_CURRENT_USER\Software\Synaptics\SynTPEnh\PlugInConfig\TouchPadPS2]
"ExButton2RunApp"="\"C:\\Programmi\\HTC CC\\autorun.exe\""
to:
[HKEY_CURRENT_USER\Software\Synaptics\SynTP\TouchPadPS2]
"ExButton1PlugInID"="SynTP"
"ExButton1Action"=dword:00000000
"ExButton1PlugInActionID"=dword:00000005
[HKEY_CURRENT_USER\Software\Synaptics\SynTPEnh\PlugInConfig\TouchPadPS2]
"ExButton1RunApp"="\"C:\\Programmi\\HTC CC\\autorun.exe\""
but it doesn't work as button1,3,4,5,6,7.......
what's wrong??
QUESTION...
Just an honest simple question: Why would anyone want to install XP on the Shift with limited functionallity, when you can install Windows 7 RC with FULL functionallity and BLAZING SPEED????
Everytime I use my shift with Win 7, I end up with a smile on my face. Yes, it is really THAT good!
sany6006 said:
Plzzzz
at least tell me if it works with you
or if there is a problem with it.
Click to expand...
Click to collapse
hello buddy i exactly followed your steps,but still facing serious issues with touchscreen disable on startup..please help me.when i disable and re-enable the pen hid in the device manager,touchscreen works,but i want to make it run always....plz help
acarriles said:
Just an honest simple question: Why would anyone want to install XP on the Shift with limited functionallity, when you can install Windows 7 RC with FULL functionallity and BLAZING SPEED????
Everytime I use my shift with Win 7, I end up with a smile on my face. Yes, it is really THAT good!
Click to expand...
Click to collapse
Yes, it's good, and everything works, but XP is faster...
Help me from 14-18 step of guide
Help me, all is ok from the step 1-13 but my problem start from step 14.
Is not easy understand the detailed sub step in the installation.
in the step 15 i don't understand what it should be appen when i click on WIFI
and my question is What do you mean " hen and cancel the windows installation" ?
i have to delete the directory in C:\programs\HCC? or the setup of installation file?
18 -- when i go in the hardware manager i don't find "the marvell SDIO… " why? i search it everywhere.
And so when i try to push HTC botton it doesn't work.
Please help me..... I'm in trounble.
Thanks for you help and guide...
Emanuel
14.- run cygwin\setup.exe, and select install from folder. select ioperm from the devel subfolder.
Unselect icons on desktop and start menu and finish.
Run cygwin.bat from c:\cygwin
type “ioperm –i” + enter and “exit” + enter
move hsect-2.1\hsect2.exe and move it to c:\cygwin\bin
15.- Download the HTC Control Center
http://www.mediafire.com/?amzome1lmmn
16.- Click on WIFI on then and cancel the windows installation.
17.- copy HTC Shift XP Drivers\WLAN\sdbus.sys to c:\windows\system32\drivers\ say yes to the replace dialog and reboot.
18.- Install the WLAN drivers , from the hardware manager, right button over marvell SDIO… update driver, and select the HTC Shift XP Drivers\WLAN folder.[/QUOTE]
video driver doesn't work for me.. i don't know why...supid htc computer...
Worked fine for me! The only thing I had to do differently was use the msi file instead of the exe with the fingerprint software.
I also had a bit of trouble with the XP installation but I used an EEE USB install procedure and had to mess with the bios a bit to get rid of the hal.dll issue.
edit: holocantus, the wlan adapter doesn't always show up instantly when you push the 'on' button. I've had to switch it on and off a couple of times before it worked.
hi
how can I run htc control center with the button on the right side
I tried right on shortcut, properties, shortcut, shortcut key
but it didn't work
i can run it with some buttons on keyboard but not with the original key
can someone help
installing xp wm7
i see many who own shift have changed from vista to wm7 or xp.i wanted to know when doing this do you have to enable voice calling again.would you install xp or wm7 in the same way as u do on laptop or os it tricky do all the drivers work proply.
HTC Shift Control Centre
I am trying to download the HTC Control Centre from the link provided but the file is no longer there.
Can you suggest another download link because I am stuck and cannot enable WIFI
Thanks
Marco
HTC Shift with XP (SP3)
Hello!
I need the SW from .mediafire.com/?amzome1lmmn
When i open the link comes "Invalid or Deleted File "
Thanks!
Anyone have HTC Control Center for XP? Please post it here or a link..
I'm also looking for the control center for xp as well.
I too need link active of control center for xp, please reactive it
me too. can we have a link to download HTC Control Center?
please help!
Download the HTC Control Center, Invalid or Deleted File
Dead links
sany6006 said:
1.- Download and save to a USB disk drive:
http://www.filefactory.com/file/fa3eb2/n/drivers_shift_XP_rar
and https://phatpipez.homeftp.org/HTCShift/Shift/TabletPC_PatchXPproSP2.exe
15.- Download the HTC Control Center
http://www.mediafire.com/?amzome1lmmn
Click to expand...
Click to collapse
Hi sany 6006, great installation guide, thank you! Yet the links no.2. and no.3 that you provided are not working, so can you please provide us an update.
Thanks!
Hi,
anyone can reupload the HTC Control Center? Link has been removed... thanks!