Computer does not recognize Vibrant? - Vibrant General

When I plug in my Vibrant to my computer, nothing happens. My phone says it's charging, but nothing else happens. No dialog that tells me that the USB is connected on the phone, or anything on the computer either that I have inserted a new flash drive. Has this happened to anyone before? Any suggestions?

After it's plugged in via usb did you mount it?
Sent from my SGH-T959 using XDA App

find the samsung vibrant drivers for your computer

Make sure drivers are installed correctly.
Windows x86 and x64 drivers:
http://forum.xda-developers.com/showthread.php?t=728929

I had the same problem when I reinstalled windows 7, after u have the drivers installed if doesn't work restart your phone that's what I did and it connected right away and recognized my phone
Sent from my SGH-T959 using XDA App

Related

USB Device Not Recognized-Windows 7

I just got windows 7 pro(clean install on new hard drive) and when I went to plug my fascinate in(using stock cable) a dialog box that read USB Device Not Recognized and Device Drivers Not Installed. I unplugged my phone but the USB Device Not Recognized still keeps popping up. Reboot fixed that but still won't recognize it? Any help is greatly appreciated.
Does anybody know of any other drivers for 7 that are 32 bit that might work? Thanks
Also I'm not rooted, stock ea28. If that helps at all. Again thanks.
Sent from my SCH-I500 using XDA App
Go to Samsung's support site (here) and then the software part on the download page. Download the drivers for the Fascinate and install them, and you should be good.
EDIT: or download here
I had an issue where the USB ports on the back of my motherboard would not recognize my fascinate. However, when I plug it into the USB ports in the front, it does. It might have to do with it being run through a different chip on the motherboard, (Or it could be my crappy Foxconn board.)

[need help] usb device not recognized!!!

hey guys,
I don't know if this still a problem with people. but I'm on win7 64bit and I can't seem to connect my nexus s, to my computer. I always have to upload from computer to dropbox then download the file from DB on my phone... usb plug doesn't work. I tried the same cable with my wifes Samsung vibrant and it recognizes it, but when i plug in my nexus s the debug icon shows up on my phones status bar for like 1 second and disappears. then window on my compter says "USB Device Not Recognized"
need help please.
What does it say in device manager (in windows)? Maybe the driver is wrong...
Sent from my Nexus S using XDA Premium App
do u have a right drivers installed
have a look here and check Google USB Driver
I'm having the same problem. I have tried both my computers and multiple cables but I continue to get the error. When I try to update the drivers or reinstall them Windows says the drivers are up to date. I've tried every USB port on both computers as well.
I even took the phone into a repair place to see if perhaps the USB port on the phone was malfunctioning and they couldn't find anything wrong with it.
solarus2011 said:
I'm having the same problem. I have tried both my computers and multiple cables but I continue to get the error. When I try to update the drivers or reinstall them Windows says the drivers are up to date. I've tried every USB port on both computers as well.
I even took the phone into a repair place to see if perhaps the USB port on the phone was malfunctioning and they couldn't find anything wrong with it.
Click to expand...
Click to collapse
Try installing pdanet, I had a similar issue when I rooted my ns and installing the pdanet drivers solved the problem.
Sent from my Nexus S using XDA App
I've been having the problem also and none of the fixes worked. Not even PDA net. You'd think that the more people have this problem so one would have found a real fix by now.
pnnorth said:
Try installing pdanet, I had a similar issue when I rooted my ns and installing the pdanet drivers solved the problem.
Sent from my Nexus S using XDA App
Click to expand...
Click to collapse
I can't get the PDAnet drivers to install - during the installation process, my phone has to plugged in, which of course the installation program can't see.
Weird thing is if I remove the battery and then plug the usb in and start the phone, the drivers show up in the device manager but they always disappear before I can unlock the phone - appears the USB connection on my Nexus S is broken...can;t think of anything else.

Driver update.

And no this is not a Kies update post but I expect it will get deleted or moved wihin minutes as usual.
For those of you running Windows 7 there is an "optional update" for new Samsung drivers. These are: Mobile USB modem, Moile MTP device and Mobile USB composite device. I found them through Windows update and as they are optional I was not notified of them. You have to plug your SGS2 in to the USB and start Kies to install them and it will require a reboot so save any data first. Hope it is of use.
doesn't work for me.....when i plug my s2 in, occasionally the MTP drivers install and then it says restart computer after installation. but after restarting the mtp drivers start installing again and then it says cannot be installed
My mtp drivers never install either.. Everything else does except that
Sent from my GT-I9100 using xda premium

Computer won't recognize my Nexus?

So I'm sending my phone back to Google, and I need to restore it to stock and lock the bootloader. The problem is when I connect my phone to my computer via usb, my computer doesn't recognize my Nexus. Although it charges it. I've tested out the usb cord on my s4 and that works perfect. I tried uninstalling and installing the drivers again. But all what I get on my computer is device not recognized. Any help would be greatly appreciated. Thanks in advance!
Sent from my SAMSUNG-SGH-I337 using Tapatalk 2
USB Debugging enabled?
On certain ROMS mine isn't recognized if IT is enabled.
I think mine has something to do with my USB Ports/Chipset, but when I shut of USB Debugging it appears.
I'm assuming its a driver issue. Try reinstalling them using this guide
http://forum.xda-developers.com/showthread.php?t=1830108
Sent from my Nexus 7 using xda premium

MTP Mode not working

Hey,
So I got my D802 today and I want to do the whole Root, Recovery, ROM shenanigans.
But for the love of god I cant connect the phone in MTP mode, so I cant Root, nor install a recovery.
I cant connect to the LG PC Suite either.
Any Ideas?
what connection type are u choosing after plugging it into the computer? are u running Windows, Mac, Linux? Windows will work with mtp out of the box but I think Mac and Linux need phone drivers installed. Windows will need drivers when you're ready to "unlock" using adb.
Sent from Tapatalk using my xposed VZW G2
Right, so I´m running Win7 64 Bit
I tried multiple USB Ports, rebooting PC and Phone, resetting Phone and now i´m all out of ideas
I never had any problems with the other phones I rooted and unlocked on this Computer
E-I-K-E said:
Right, so I´m running Win7 64 Bit
I tried multiple USB Ports, rebooting PC and Phone, resetting Phone and now i´m all out of ideas
I never had any problems with the other phones I rooted and unlocked on this Computer
Click to expand...
Click to collapse
when you first plug in your phone it gives you the option to install the drivers needed to connect in the different modes, if not on the top right corner of the menu with charge/mtp/pc software it should have the option to install the drivers
E-I-K-E said:
Right, so I´m running Win7 64 Bit
I tried multiple USB Ports, rebooting PC and Phone, resetting Phone and now i´m all out of ideas
I never had any problems with the other phones I rooted and unlocked on this Computer
Click to expand...
Click to collapse
you never said what connection type you're choosing on the phone after plugging it in. there are a few options and change how the phone is seen by Windows. some options won't have it display as an mtp device or as a drive letter in my computer.
Sent from Tapatalk using my xposed VZW G2
Usb cable problem?
Try toggle usb debugging
Sent from my LG-D802 using XDA Premium 4 mobile app
Really Weird
I'm having the same issue. I'm running OptimusG3 v1.3, I've never had an issue with it before, I used MTP to transfer files yesterday, worked flawlessy, now it won't. I was trying to map the G2 as a network drive, I installed LGPCSuite, a couple of other software that should be inconsequential, and suddenly my phone says connected as MTP, but my laptop won't recognize or show the device in My Computer. I get installing device drivers prompts, I used the hardware and devices troubleshooter which told me 'LGE Android MTP Device has a driver problem' and LGE Mobile USB Modem has a driver problem. Reinstall device driver -> completed, but still not fixed. I installed LG's universal uSB tool or whatever, no fix. I have no idea wth is up (It's not a USB debugging accidental toggle either). I'll try uninstalling PCSuite. I though it would be more useful

Categories

Resources