Related
Hi,
i am new to the forum, Please forgive my whining. I have being tryin to flash my imate Jasjam foe the past 3 days without success. i have gone through this forum front to back and tried almost everything. i have even downloaded almost everything you have but still my phone shows "NO GSM" wen booting. It dosent even flash. the closest i have to to is 13%. everything works perfectly except the GSM part. please i need help. im kinda a noob to the flashing thing so i would appreciate details on how to get this done. Thanks
Did you Hard SPL your phone first?
yes i did. i even used different versions of hard spl
Make sure you have Hard SPL ver7(phone should display in bootloaderIPL 1.04, SPL 2.10 Olipro) then try the sd card method of flashing an os. use a stock rom though to see if your radio can be fixed (this is the problem part). You need to format an sd card fat32 then copy the .nbh file onto it (not into a folder). rename it "hermimg.nbh" then put fone into bootloader(tri-colour) screen by pushing and holding ok button above flywheel, power button and using stylus to reset. HOLD ALL BUTTONS UNTIL IN BOOTLOADER... Follow instructions from there.
If you cant reflash your radio rom, you can still put a cooked rom on and use for a PDA but you won't be able to use as a phone again, sorry...
Hope this helps....& good luck...
thanks. i havent tried it with an sd card b4. i do that now. what version of rom do u recommend????
whats that feeling you get when you've felt like your going down that road again?
ps i got sick of trying to find the MMS settings menu in most of those other roms and just reloaded the default telstra one again! >.<
i was kinda hooked on CRC's roms, due to his locality of cooking but i dont mind some of the crystal ones Tyr0's
hi, i have tried the sdcard method. first i hard spled using v7 then i copied the nbh files as u instructed. i have tried it using different .nbh files and i have the same result. it gets stuck on the part where it is supposed to update the radio.what should i do pls
the "No GSM" is when the Radio Rom is blank, and is next to impossible to re-write. there is a section in the forums for this problem.
as far as things go, its probably now just a PDA, but keep searching the forums for people who have rescued their radio rom, you may get lucky
please can u point me to the thread??? i have gone through almost all the threads for a solution and so far i have come up blank.
try looking round here
http://forum.xda-developers.com/forumdisplay.php?f=306
might find some useful info here
http://forum.xda-developers.com/showthread.php?t=369434
also try the wiki
http://wiki.xda-developers.com/index.php?pagename=Hermes_Unbrick
good luck
Depends on how you went about it.
If i were in your position i would try the following
Try a couple of Manufacturer roms WITH radios in it
ie
Try the HTC then try the Telstra 6.0 one.
Secondly check the sim slot.
Carefully bend the guides down and the 6 pins up so when you put in your sim it is very firm.
I had the No GSM problem this week and it turned out to be this (after numerous grief/fixes and workaround).
post back the results
i have pretty much given up on my imate. i have tried every method recommended by everybody but still, i've got nowhere. As a PDA, the device works very well but that is basically useless to me without the phone functions. Please if there is any new input, i would appreciate it. The device boots with NO GSM.
i have actually already tried a couple of "Manufacturer ROMs", dunno if they were good. could u point m eto where i can get any of those??? Thanks
Ok my last 3 days I've been simply trying to install some custom ROMs and did all the reading and research step by step, but my AT&T HTC Pure just wont update the HSPL no matter what.
Steps I've taken so far:
1. Formatted SD Card
2. Obtained and put goldcard.img on SD Card
3. Fully connected phone via Windows Mobile Device Center
4. Antivirus turned off
5. Tried Topaz-HardSPL_V5_00R5_183HSPL in in auto-mode, fails telling me " Fatal Error" and underneath "Please make sure the device is properly synced; Please retry after syncing device (via Activesync or Windows Mobile Device Center)" which I have...
6. Tried installing ENABLERAPINEW.cab with results "unsuccessful" (but again my phone does sync just fine, I still took this step)
7. Tried Manual Flash, my phone never goes into bootloader, and right after "verifying phone information" shows screen saying "ERROR [224]: DEVICE NOT RESPONDING"
8. Tried entering bootloader mode and during auto-mode to flash, tells me same exact thing as without bootloader
9. Tried Manual Flash in bootloader, it gets to flashing screen with a progress bar at 0% on both PC and phone forever, I waited 20 mins and it didn't change.
It seems as if there is something preventing RUU to be writing anything on my phone, so that's why it throws connection error, but I am not sure. And I am seriously loosing all hope in this and dont know what to do, so HELP please!
Update
I also forgot to mention that I tried to Hard_SPL from another computer that is Windows XP, used Activesync, which didn't work either...
The only thing i can tell you is to read this thread (what you have already done i think)
http://forum.xda-developers.com/showthread.php?t=520312
SerGTR said:
Ok my last 3 days I've been simply trying to install some custom ROMs and did all the reading and research step by step, but my AT&T HTC Pure just wont update the HSPL no matter what.
Steps I've taken so far:
1. Formatted SD Card
2. Obtained and put goldcard.img on SD Card
3. Fully connected phone via Windows Mobile Device Center
4. Antivirus turned off
5. Tried Topaz-HardSPL_V5_00R5_183HSPL in in auto-mode, fails telling me " Fatal Error" and underneath "Please make sure the device is properly synced; Please retry after syncing device (via Activesync or Windows Mobile Device Center)" which I have...
6. Tried installing ENABLERAPINEW.cab with results "unsuccessful" (but again my phone does sync just fine, I still took this step)
7. Tried Manual Flash, my phone never goes into bootloader, and right after "verifying phone information" shows screen saying "ERROR [224]: DEVICE NOT RESPONDING"
8. Tried entering bootloader mode and during auto-mode to flash, tells me same exact thing as without bootloader
9. Tried Manual Flash in bootloader, it gets to flashing screen with a progress bar at 0% on both PC and phone forever, I waited 20 mins and it didn't change.
It seems as if there is something preventing RUU to be writing anything on my phone, so that's why it throws connection error, but I am not sure. And I am seriously loosing all hope in this and dont know what to do, so HELP please!
Click to expand...
Click to collapse
you cant flash hardspl on the sd card, it must be done over activsync. u dont put it on your card, you run it from your computer. make a new folder{on your computer} and name it whatever , then unrar the file into the folder, then you should be able to flash the hardspl.make sure the ruu and the nbh file are in the folder.
leemoss84 said:
you cant flash hardspl on the sd card, it must be done over activsync. u dont put it on your card, you run it from your computer. make a new folder{on your computer} and name it whatever , then unrar the file into the folder, then you should be able to flash the hardspl.make sure the ruu and the nbh file are in the folder.
Click to expand...
Click to collapse
I do run Custom RUU from desktop local drive and not from SD Card and results mentioned above are the ones I get. Again tried with phone on, it just tells me ERROR [224] and never goes into bootloader or anything. Tried entering the the phone to bootloader manually and connecting it to usb and run RUU, it goes a little further where it finally gets to screen of flashing progress but freezes at 0% and thats it.
Could missteps in obtaining Goldcard be the reason for such behavior?
leemoss84 said:
you cant flash hardspl on the sd card, it must be done over activsync. u dont put it on your card, you run it from your computer. make a new folder{on your computer} and name it whatever , then unrar the file into the folder, then you should be able to flash the hardspl.make sure the ruu and the nbh file are in the folder.
Click to expand...
Click to collapse
Yes, you can flash ANY .nbh from your SD card by renaming it TOPAIMG.nbh.
SerGTR said:
I do run Custom RUU from desktop local drive and not from SD Card and results mentioned above are the ones I get. Again tried with phone on, it just tells me ERROR [224] and never goes into bootloader or anything. Tried entering the the phone to bootloader manually and connecting it to usb and run RUU, it goes a little further where it finally gets to screen of flashing progress but freezes at 0% and thats it.
Could missteps in obtaining Goldcard be the reason for such behavior?
Click to expand...
Click to collapse
Sorry for my ignorance but what is goldcard?
What is the current SPL?
I agree leemoss. You need Hardspl from your system. First synch your phone to system through Active sync. Execute the HardSpl.183, select auto flash.
Second thing i noted is on SDcard you have to rename the ROM file and store it as TOPAIMG.nbh and place in the root folder.
I read about people having problems, and the ones that weren't spent the 20 bucks on the Sim unlocker. I'd never flashed a phone before, so I went that route. It's worth it IMO.
rbrsddn said:
I read about people having problems, and the ones that weren't spent the 20 bucks on the Sim unlocker. I'd never flashed a phone before, so I went that route. It's worth it IMO.
Click to expand...
Click to collapse
See I do take ever single step that is in the guide here:
http://forum.xda-developers.com/showthread.php?t=530335
But it just doesnt work, but again I flashed HSPL and custom ROMs before on my Xperia X1a (unlocked) without any problems. I attached a pic of my bootloader, and when I try to run some custom ROM which I name TOPAIMG.nbh it enter screen "loading..." and freezes so have to rest my phone by taking battery out so it loads back just fine.
Again this phone I am using is HTC Pure by AT&T and thats what confuses me, maybe I really do have to SIM unlock my phone before I can HSPL and flash custom .nbh ROMs?
gold card
Bruce Inman said:
Sorry for my ignorance but what is goldcard?
What is the current SPL?
Click to expand...
Click to collapse
My stock SPL is in pic attached, and Goldcard.img suppose to be something I had to put on my SD Card so that I have SuperCID so I can flash HSPL and any custom ROMs, you can read more about it here: http://forum.xda-developers.com/showthread.php?t=530335
SerGTR said:
See I do take ever single step that is in the guide here:
http://forum.xda-developers.com/showthread.php?t=530335
But it just doesnt work, but again I flashed HSPL and custom ROMs before on my Xperia X1a (unlocked) without any problems. I attached a pic of my bootloader, and when I try to run some custom ROM which I name TOPAIMG.nbh it enter screen "loading..." and freezes so have to rest my phone by taking battery out so it loads back just fine.
Again this phone I am using is HTC Pure by AT&T and thats what confuses me, maybe I really do have to SIM unlock my phone before I can HSPL and flash custom .nbh ROMs?
Click to expand...
Click to collapse
You only need to CID unlock to flash ROMs, if you buy the SIM unlocker you get both CID and Security unlocked but it still may not work.
I see you have 1.8.33 which is good because there is not a working HSPL for 2.54
You say you tried running custom ROMs as TOPAIMG.nbh, but did you try it with the HSPL nhb? It would be the same process as doing a ROM from SD card.
I would also get rid of goldcard as that is only to recover a bricked device.
Get all goldcard stuff off your card and PC, reformatt your card to Fat32 the place the renamed TOPAIMG.nbh and proceed to bootloader.
One last pointer, another method to flash is to download Topaz Custom RUU Wrapper and put the exe file in the same folder as the .nbh on your desktop and run the .exe after your sync'd. **Make sure all firewalls and antivirus are off.**
Good Luck.
Bruce Inman said:
You only need to CID unlock to flash ROMs, if you buy the SIM unlocker you get both CID and Security unlocked but it still may not work.
I see you have 1.8.33 which is good because there is not a working HSPL for 2.54
You say you tried running custom ROMs as TOPAIMG.nbh, but did you try it with the HSPL nhb? It would be the same process as doing a ROM from SD card.
I would also get rid of goldcard as that is only to recover a bricked device.
Get all goldcard stuff off your card and PC, reformatt your card to Fat32 the place the renamed TOPAIMG.nbh and proceed to bootloader.
One last pointer, another method to flash is to download Topaz Custom RUU Wrapper and put the exe file in the same folder as the .nbh on your desktop and run the .exe after your sync'd. **Make sure all firewalls and antivirus are off.**
Good Luck.
Click to expand...
Click to collapse
Tried still same results... freezes at flashing with 0% at progress bar. I attached view screens that concern me that RUU cant read my stock ROM Image version, is this normal? The only other thing I am gonna try to do is maybe reinstall the entire Windows Mobile Device Center, besides that I am clueless.
Have you install the enablerapinew.cab first?
If so, I'm outta tricks. Others have been having issues as well in the HSPL thread. You may have to wait for an update.
I don't think its anything on your PC unless firewall or AV aren't turned off.
Remove SD-Card and Sim-Card before HardSPL from PC. I had 2 TouchDuals before TD2, one was no prob to flash, second needed SD-Card to be removed! Once HardSPL succeeded you may leave SD-Card in TD2.
WORKING!!!
YES!!! I finally got it to SPL, what it was that my phone could not accept any .cab installations due to security issue with "unknown publisher" signature, that's why my phone didn't allow me to install enablerapinew.cab but then I just hard reset my phone installed enablerapinew.cab and everything worked, YEY! Thank you Bruce Inman, and everyone else who spend time to try to guide me through my issues, tnx!
i didnt unlock mine. all i did was flash it.theres gotta be sumthn ur doin wrong.
Problem solved!
leemoss84 said:
i didnt unlock mine. all i did was flash it.theres gotta be sumthn ur doin wrong.
Click to expand...
Click to collapse
I figured it out man, tnx.
SerGTR said:
I figured it out man, tnx.
Click to expand...
Click to collapse
good deal man. what was the prob?
leemoss84 said:
good deal man. what was the prob?
Click to expand...
Click to collapse
What it was that my phone could not accept any .cab installations due to security issue with "unknown publisher" signature, that's why my phone didn't allow me to install enablerapinew.cab but then I just hard reset my phone installed enablerapinew.cab and everything worked.
I know apparently this isnt the best way to flash your HD2, but im stuck without any access to windows. (mac user)
i cant seem to find step by step instructions on how to do this properly....
is there a link somewhere i can get to so i can figure this out? isnt it as simple as copying the custom.nbh file to the root of my memory card, and entering the bootloader screen?
Sorry for all the noob questions.
take ruu_signed.nbh, copy it to sdcard formatted fat32 (2gb cards seen to work best) rename it leoimg.nbh, boot to bootloader and it should detect the image and ask if you want to flash.
it still requires hspl, unless you have a goldcard(easier to borrow a pc for two minutes to apply hspl than make a goldcard)
the phones already been flashed with hspl.
i just want to change the rom!
Thanks for the tips im going to go for it right now
newnoise1024 said:
the phones already been flashed with hspl.
i just want to change the rom!
Thanks for the tips im going to go for it right now
Click to expand...
Click to collapse
Hi
One advice you have to remember is DO NOT flash any official rom with this method. If you do it will replace the hspl and you will be stuck.
Good luck
sabes143 said:
Hi
One advice you have to remember is DO NOT flash any official rom with this method. If you do it will replace the hspl and you will be stuck.
Good luck
Click to expand...
Click to collapse
True, flashing a stock rom via sd card will overwrite hspl with the new stock spl, but you will not necessarily be stuck. That used to be the case before hspl2, as the original hspl only worked with spl 1.42.0000. HSPL2 now works with 1.42.0000, 1.66.0000 or 2.08.0000 spl's.
or just throw your mac away and buy a PC
What many forget is that you actually need an SD card and not SDHC, as those will not work.
understand u already flash hspl,
microSD / microSDHC will work as long it is formatted with FAT32 fs.
just copy the *.nbh to SD root & rename it to LEOIMG.nbh.
enter bootloader, follow on-screen.
if bootloader cant find any rom image, run scandisk & try again.
gd luck.
I just flashed this rom.
It seemed to be fine. It installed and looked a-ok.
I had a look around and every thing looked as it should.
I added "26.4 column Start menu.cab" and now the phone won't reboot at all.
It gets to the HTC white screen, and then hangs.
Any ideas?
Is it a conflict between the 4 columns app and the ROM?
url_paul said:
I just flashed this rom.
It seemed to be fine. It installed and looked a-ok.
I had a look around and every thing looked as it should.
I added "26.4 column Start menu.cab" and now the phone won't reboot at all.
It gets to the HTC white screen, and then hangs.
Any ideas?
Is it a conflict between the 4 columns app and the ROM?
Click to expand...
Click to collapse
when you say "just flashed this rom", what rom?
also, did you read ALL the first few posts in the chefs thread? chances are it requires a specific radio version
either that or you didn't do a hard reset after you flashed.
apologies, I replied in here when I thought I was in the HTC Energy thread.
The device rebooted after the flash.
Does that not count as a hard reset?
samsamuel said:
Is it T Mobile usa? if so, then you have flashed an incompatible rom.
tmous (T Mo US) phones will opnly take roms based on 2.10, the rom you have installed is 1.66 (D 1. 66. Kumar)
Kumar has a rom in the Tmo US section based on 2.10, you should use that, not the one in teh normal hd2 section.
With power off, press and hold "volume down", tap the power key and continue to hold vol down until you get the three coloured screen, connect to usb, wait for word 'serial' to become 'usb' and flash a compatible rom.
Click to expand...
Click to collapse
I've just been digging through and saw this, I have the 3 colours and USB.
Gonna try and reflash and see what happens.
These forums own!
edit: re-flashing it went the same way, would hang on boot.
I've gona back to using:
_HTC HD2_RUU_Leo_HTC_WWE_1.66.405.2_Radio_Signed_15.30.50.07U_2.06.51.07_Ship
for the moment.
I'll look and see what it is I missed that stopped the energy rom from working as advertised.
Try installing the recommended Radio
url_paul said:
I've just been digging through and saw this, I have the 3 colours and USB.
Gonna try and reflash and see what happens.
These forums own!
edit: re-flashing it went the same way, would hang on boot.
I've gona back to using:
_HTC HD2_RUU_Leo_HTC_WWE_1.66.405.2_Radio_Signed_15.30.50.07U_2.06.51.07_Ship
for the moment.
I'll look and see what it is I missed that stopped the energy rom from working as advertised.
Click to expand...
Click to collapse
I ran into the same problem and all I had to do was to get the phone into Bootloader and then flash the radio recommended by ROM Cook.
also the same problem
I have also this problem, but I think it's in the rom, when I installed the rom, everything seems ok, but after a reset, the screenthat I get is the white HTC screen.
After a hard reset it is ok, but after a reset it is the same problem.
Then I thought, i take an older rom, but when I've installed the rom he is automatic installing the cab file's at the end of the installation, and he's going to automatic reset the HD2. After the reset I have the same problem as with the new rom.
So the biggest problem is that I can't install another rom or radio because the rom don't start for 100%, and when I do a hard reset, after the reset at the end of the installation I get the white HTC screen.
What can I do, can I fix this problem?
groot321 said:
I have also this problem, but I think it's in the rom, when I installed the rom, everything seems ok, but after a reset, the screenthat I get is the white HTC screen.
After a hard reset it is ok, but after a reset it is the same problem.
Then I thought, i take an older rom, but when I've installed the rom he is automatic installing the cab file's at the end of the installation, and he's going to automatic reset the HD2. After the reset I have the same problem as with the new rom.
So the biggest problem is that I can't install another rom or radio because the rom don't start for 100%, and when I do a hard reset, after the reset at the end of the installation I get the white HTC screen.
What can I do, can I fix this problem?
Click to expand...
Click to collapse
RTFM. These constant posts about white screen hangs are really getting frustrating. Does nobody follow the forum rules of searching any longer? There's nothing wrong with the rom, the user on the other hand I'm not so sure of.
YOUR RADIO VERSION IS WRONG
url_paul said:
I've just been digging through and saw this, I have the 3 colours and USB.
Gonna try and reflash and see what happens.
These forums own!
edit: re-flashing it went the same way, would hang on boot.
I've gona back to using:
_HTC HD2_RUU_Leo_HTC_WWE_1.66.405.2_Radio_Signed_15.30.50.07U_2.06.51.07_Ship
for the moment.
I'll look and see what it is I missed that stopped the energy rom from working as advertised.
Click to expand...
Click to collapse
If you bothered to read even just the last 5 pages of the Energy thread you would have seen probably 20 mentions of the problem. Energy rom won't work with a x.xx.51.xx radio.
Hey so i just picked up an hd2 on craigslist. when the seller handed my the phone he showed me the phone working and then did a hard reset so i thought nothing of it and took the phone while it was resetting. then while waiting for it to boot i noticed it was taking quite a while so i took out the battery and let it reboot, it turned on then froze on the homescreen. i've tried several hard resets and have gotten the phone to the point where it works but only after putting in a removing the battery several times and the phone sticking on the "stick together" logo. I was going to try to do the newest tmobile update on the phone using the one available on their website but now i have an issue plugging the phone into the computer or wall adapter as it will make the phone freeze and ill have to go back through my removing the battery 5 times process. is this some sort of common issue with a common fix or should i take the phone to tmobile or htc and see what they can do for me. i dont have a receipt as a purchased the phone on craigslist so im not sure tmobile will do anything for me.
Edit: i can now connect my phone to the pc i'm trying to update to 2.13.531.1 but i got to 8% but the update froze there and the phone currently has no image version. I'm using windows 7 ultimate and ive tried to run as administrator and with xp service pack 3 compatibility.
thatg said:
Hey so i just picked up an hd2 on craigslist. when the seller handed my the phone he showed me the phone working and then did a hard reset so i thought nothing of it and took the phone while it was resetting. then while waiting for it to boot i noticed it was taking quite a while so i took out the battery and let it reboot, it turned on then froze on the homescreen. i've tried several hard resets and have gotten the phone to the point where it works but only after putting in a removing the battery several times and the phone sticking on the "stick together" logo. I was going to try to do the newest tmobile update on the phone using the one available on their website but now i have an issue plugging the phone into the computer or wall adapter as it will make the phone freeze and ill have to go back through my removing the battery 5 times process. is this some sort of common issue with a common fix or should i take the phone to tmobile or htc and see what they can do for me. i dont have a receipt as a purchased the phone on craigslist so im not sure tmobile will do anything for me.
Click to expand...
Click to collapse
I would put the phone in boot load manually by holding the volume down button while turning it on, and remove the memory card and then reflash the tmobile rom
can someone also help me figure out how to get the ruu.nbh file off this rom and how big it should be so i can try to flash it from the sd card. thanks
http://forum.xda-developers.com/showthread.php?t=681030
zelendel said:
I would put the phone in boot load manually by holding the volume down button while turning it on, and remove the memory card and then reflash the tmobile rom
Click to expand...
Click to collapse
i found a .nbh file on my computer that was 4mb and renamed it leoimg.nbh then tried putting it on a freshly formatted fat 32 micro sd car and went into bootloader mode but the phone gives me an upgrade error, asks me to try again and just goes to a white "loading..." screen now the phone is stuck here. its like the newest issue is the one im stuck with. now i cant get the phone to sync with the computer or run the .exe to recognize the phone
thatg said:
i found a .nbh file on my computer that was 4mb and renamed it leoimg.nbh then tried putting it on a freshly formatted fat 32 micro sd car and went into bootloader mode but the phone gives me an upgrade error, asks me to try again and just goes to a white "loading..." screen now the phone is stuck here. its like the newest issue is the one im stuck with. now i cant get the phone to sync with the computer or run the .exe to recognize the phone
Click to expand...
Click to collapse
What error did it give you? Found an nbh file? was it from a stock rom? Do you have Hard SPL on it? If it doesnt have HSPL on it then you will only be able to load a stock rom
zelendel said:
I would put the phone in boot load manually by holding the volume down button while turning it on, and remove the memory card and then reflash the tmobile rom
Click to expand...
Click to collapse
+1 or flash the phone then task 29 it.
Sent from my HTC Desire using XDA App
zelendel said:
What error did it give you? Found an nbh file? was it from a stock rom? Do you have Hard SPL on it? If it doesnt have HSPL on it then you will only be able to load a stock rom
Click to expand...
Click to collapse
no i have not run hard spl so i can only install a stock rom a suppose. the exe gets stuck at 8%, i have no idea where the right nbh file is. i read somewhere when you run the exe it installs the nbh in a temp folder but im not sure i found the right one. ive also downloaded task29 and tried to run as admin but it doesnt do anything just goes to the htc install screen and stays at 0% Getting frustrating it was working fine actually before i tried to install the new tmobile software update. ive read that task29 gets rid of extra leftovers of other roms and might help the exe finish up on the phone and get past that 8% wall but it doesnt seem to be working for me
right click the stock exe file choose extract here, will give 9 or so files, one of them is about 200meg and is called ruu_signed.nbh that's the file you want.
randomly flashing nbh files that you don't know what they are, that's about the stupidest thing you can do...... you deserve a brick for being an idiot.
samsamuel said:
right click the stock exe file choose extract here, will give 9 or so files, one of them is about 200meg and is called ruu_signed.nbh that's the file you want.
randomly flashing nbh files that you don't know what they are, that's about the stupidest thing you can do...... you deserve a brick for being an idiot.
Click to expand...
Click to collapse
lol thank you for the words of encouragement, so i've extracted the .nbh file its 268mb, renamed it to leoimg.nbh tried the update from the sd card and it fails at the radio says, update terminated, update FAIL. any idea where to go from here?
Edit: i've run hspl3 on the phone is boot loader mode and have also run task29 from doloop but still get the same error with the tmobile file. 8% using the exe and FAIL trying to flash from the sd card
heh you're welcome. (i was harsh to make the point,,, if you found a random bottle of liquid that said petrol on it, you wouldn't put it in your car till you were sure it was petrol, right?)
as to why it failed, i'm not sure, i think i'd probably hspl3, choose 2.08.hspl, then try flash a radio on its own (see the tmous radio thread) because it could be a bad radio.
just please confirm the exact filename of the .exe you extracted ruu_signed from?
samsamuel said:
heh you're welcome. (i was harsh to make the point,,, if you found a random bottle of liquid that said petrol on it, you wouldn't put it in your car till you were sure it was petrol, right?)
as to why it failed, i'm not sure, i think i'd probably hspl3, choose 2.08.hspl, then try flash a radio on its own (see the tmous radio thread) because it could be a bad radio.
just please confirm the exact filename of the .exe you extracted ruu_signed from?
Click to expand...
Click to collapse
The first exe file, which got to 8 percent then went red and failed was
T-Mobile_HD2_MR_Software_2.13.531.1
After hspl3 and using task29 i tried flashing this exe which gets to 99% and fails
RUU_Leo_1_5_TMOUS_2.02.531.MASD_S__Radio_Signed_15.29.50.07U_2.06.50.04_TeleNav-5.5.42
that second one, did you flash from sd card? cos its a manufacturing test rom, and if so then you may now be stuck with a test spl of 2.02, and if so things just got a heap worse,,,
go into bootloader and tell me what it says next to spl
samsamuel said:
that second one, did you flash from sd card? cos its a manufacturing test rom, and if so then you may now be stuck with a test spl of 2.02, and if so things just got a heap worse,,,
go into bootloader and tell me what it says next to spl
Click to expand...
Click to collapse
i tried flashing using the .exe method in bootloader mode. next to spl it reads -2.08.hspl 8g XE
it now says
Upgrade ROM code error
ah ok, good.
so, it seems to be the radio causing the error, so since you have hspl installed, why not try a custom rom? they don't include a radio, so it may bypass the problem.
samsamuel said:
ah ok, good.
so, it seems to be the radio causing the error, so since you have hspl installed, why not try a custom rom? they don't include a radio, so it may bypass the problem.
Click to expand...
Click to collapse
Which do you suggest, i bought the phone so that i could ultimately install android on it. but it seems i'd be lucky to even have wm running on the thing
Edit. just tried kumars classic rom, renamed to leoimg tried running off the sd card, The update finishes successfully but after i hit the reset button on the back of the phone i just see the tmobile stick together logo and the phone doesnt boot. Do a lot of people struggle with the hd2s or do i just have a bad example here?
well unfortunately i think you may have a dud. its the radio that is preventing it from booting.
it could be the radio from that test rom, it could be something else (but still the radio)
options...
its still under warranty, speak to t mobile and/or htc, but don't mention flashing and be sure to remove hspl if you do send it back. (run hspl3, choose 2.08.0000, that's stock)
or
look on here for a user called xmoo, he knows a lot about this sort of problem, (im just good with regular flashing issues)
im having the same issue so if you believe its the radio will installing different radio maybe fix the problem?
i;ve tried installing a new radio from the sd card. it goes red and fails
It sounds like a hardware issue at this point. I'm willing to bet you fried something when you pulled the battery in the middle of the master reset.
Hope thats something htc will cover. Phones on its way over
Hey guys,
So my HD2 recently started having the same issue a lot of you guys are having with the touchscreen just dying or being very unreliable. This past week I've had trouble getting past the lock screen and today it takes me half an hour to a full hour of attempts to make it past the lock. Once I do, however, the screen works fine until it's locked again.
I'm about two weeks away from warranty ending, so I want to get this bad boy sent in ASAP. A year ago I flashed a custom ROM onto the phone and haven't modified it until this morning when I installed MAGLDR 1.13 and NAND Android ROM. The new ROM worked great but didn't resolve the touchscreen issue at all.
What I want to do is completely restore the phone to how I bought it from T-Mobile US a year ago. I don't want the replacement voided because of the custom ROM, though it clearly has nothing to do with the error.
Not being very technically proficient with this stuff (aside form the dozens of hours I've spent reading up), what is the best way to go about this?
So far I tried doing a Hard Reset manually via the VolUpDown/EndCall button boot, but that just booted me into NANDroid after the reset. I tried downloading WinMo from the T-Mo site, but it's asking for a phone identification number I can't access because of the lack of touchscreen access.
Any help/advice you guys can offer would be really appreciated. Thanks in advance!
You can get the IMEI number from behind the battery to download the rom from t-mobile.
This was explained to me by another member here
Right click the ROM file you download from the T-mobile site and rename the .exe to a .zip and then you can explore the file to find the RUU_signed.nbh file. You want to copy the RUU_signed.nbh file to the root of your SD card (make sure it has been formated to FAT32) and rename the file to LEOIMG.nbh. then place the SD card in the HD2. Boot the HD2 imto bootloader and as soon as you see searching on the screen let the volume down button go. It should ask if you want to flash the imageand you will have to press the end button to confirm and it will flash the ROM.
bnd10706 said:
You can get the IMEI number from behind the battery to download the rom from t-mobile.
This was explained to me by another member here
Right click the ROM file you download from the T-mobile site and rename the .exe to a .zip and then you can explore the file to find the RUU_signed.nbh file. You want to copy the RUU_signed.nbh file to the root of your SD card (make sure it has been formated to FAT32) and rename the file to LEOIMG.nbh. then place the SD card in the HD2. Boot the HD2 imto bootloader and as soon as you see searching on the screen let the volume down button go. It should ask if you want to flash the imageand you will have to press the end button to confirm and it will flash the ROM.
Click to expand...
Click to collapse
I seriously owe you a beer, this solution worked flawlessly. Thank you!!
Hi ... this is exactly what i need to do, but my problem is I don't have my SD card in my phone anymore. I forgot my phone at home ... and this is my go to phone when I forget things!!! I flashed the phone, and now it's not going to work the way that I need to without the card. Anyway of reseting the phone?? Please help!
Flash over usb, then use hspl 4 to set stock spl.
samsamuel said:
Flash over usb, then use hspl 4 to set stock spl.
Click to expand...
Click to collapse
How exactly do i get hspl 4?
It's been a long time since i flashed anything and played around with my phone.
look at the links in my sig, you want the one that says HSPL4
samsamuel said:
look at the links in my sig, you want the one that says HSPL4
Click to expand...
Click to collapse
ok... thanks so much for that...
what about some instructions?
phoneoff-power+voldown-releasepowerkeepholdingvoldown-stripedscreen-insert usb-whenserialchangestousbinsertusb-runhspl4(rightclickrunasadministrator)-choose2.08.0000or3.03.0000asyoulike-whenphonerebootsimmediatelyholdvoldowntoreenterbootloader(stripedscreen)-waitforserial-->USB-runthestockromupdateyoudownloaded.
or, simplified
bootloader - run hspl4 - set desired spl - bootloader - flash stock rom - sit back all smug.