Help, I have a weird problem with my phone. It keeps saying it's "connected" to a usb cable when it's not. Can still get it working fine and everything but the major problem is when I "power off" the phone. I cannot turn it back on unless it's connected to a usb cable.
This happened on last night, I'm thinking it's a hardware issue and may need to be replaced but was wondering is there anything else I can do?
I've tried hard reset the phone (that is it formats EVERYTHING on the phone, done through the service code). Tried factory reset, didn't work.
Tried flashing a new firmware with repartition, didn't work either
Can anyone help or suggest what I can do?
Thanks.
If I return this, might get another phone. since the gps is **** on this anyway
Related
Hello,
this is what the problem is, the power button doesnt bring it back to life. i do a soft reset, it says press zero to clear, i do that it doesnt work. then i do a hard re-set and it shows 'serial', i plug in the usb and it changes to USB (think that's what is called the boot loader'.
now i ran teh exec official firmware, it managed to update it onces but after that i did a soft reset and it didnt come to life. i repeated that process again but this time the firmware didnt even manage to communicate with the device as it said unknown usb device. and then i got an error 101, connection error
any ideas whati can do to make sure it gets restored, i am really going nuts now!!
Same Problem
I am having the same problem with my 02 exec. My phone keeps on being in bootloader, I have tried mtty and I don't have usb connection. Hmm I have tried uni_exitbootloader ,but it tells me that it can not open my usb port. Which sucks. Truely and I am stuck. I am running vista. So I am stumped because I don't know what else to do.
Me too
I am stuck on bootloader page the one that says USB at the top and V1.00 at the bottom. I have Vista so can not use mtty or the other one. I have turned off the USB on Windows Mobile thingy from Vista like activesync. I can get the white screen to show O and X for either factory reset or exit. And I have tried the bootloader screen as noted above. So can anyone help?
i got it working for 2days and then when i was on wifi, it crashed again and wont start again, i get to serial/usb mode of bootloader and also to hard reset when i press 0 to clear everything. but then it doesnt start again.
i thought it was something to do with the battery so i put in a new battery but that still doesnt help.
can someone send me a link to mtty and what to use it. i shall give that a try again.
thanks
mines just still stuck
same im still stuck in boot loader wont budge from he bootloader screen with serial v1.00 on cannot connect via usb as the connection broken i use a extrunal battery charger and got serveral batterys any help yet?
I have a PPC6800 with US CELLULAR. I have never done any rom updates whatsoever. Earlier today my sound was acting funny as it does sometimes so I did a soft reset of my phone. It brought me into the bootloader screen where it says:
TITA100
SPL-1.07.0000
CPLD-9
and Serial at the bottom or USB if I plug in the USB cord.
If I plug in the USB and reboot my phone works as normal but if i disconnect it and reboot its back to the bootloader. I have used titan_exitbl.exe and it works of course until I reboot without the USB plugged in. Why would this be happening and how could I remedy the situation. Seems simple as everything works fine when I boot up with the USB plugged in.
Thanks for any replies.
Brandon
You are having a hardware failure. Time to get it replaced.
I had that same issue, eventually after upgrading it stopped. Hasn't done it in over 8 months now.
rcaryl said:
I had that same issue, eventually after upgrading it stopped. Hasn't done it in over 8 months now.
Click to expand...
Click to collapse
How did you upgrade it?
I have mine stuck in the bootloader. But it has SPL-2.06.0000 CPLD-9 . My phone locked up while I was trying to use it as a modem and reset it with the usb cable still pluged in and got the rainbow screen. Whenever I tried to reset it or hard reset, it would show a screen for a split second that said No image found. I have since then flashed it via the SD method and the USB method with two different sprint roms. The newest one on the HTC site and the last one. I also used the boot exit program and that doesn't work.
i've been searching and haven't seen anything on this (unless it's buried on an unrelated thread) ... when i turn on usb debugging (so i can adb to phone) and plug it into my laptop, usb debugging shows up in the task bar but then the phone freezes. i can't do anything until i remove the battery and reboot.
the weird thing is that i've used usb debugging fine for a week, just today it's been crapping out.
has anyone ever had this issue? i'm reflashing a rom for the second time today to fix it. i'm going to pay more attention to the updates i flash after the rom to try to figure out which one is breaking it (i think maybe the audio fix?).
anyway, if anyone has any insight, please share.
thanks.
Hmm... Only thing I can suggest is to reflash a ROM.
I have the same problem on my htc magic with the 1.6 official rom.
Have try many different cables but no success.
I tried it this morning with a formatted 8GB SDCard but it gives the same result. The Magic freezes after putting the phone on USB debugging.
Why o why?
You'll find me on Friday in the local Vodafone store.
So I Odin'ed back to stock today with the intention of flashing Bionix 1.2.1 and it went off without issue. Then, when I went to connect it to my laptop it of course asked me what kind of connection to use and of course I chose Kies. That's when it all went downhill. The Kies screen would flash back and forth from my home screen over and over in an endless loop. I scratched my head and decided to try doing it via mass storage and my computer does not recognize it. I tried reinstalling the usb drivers but that did not solve any of my issues. I tried to re-Odin which didn't solve the problem either.
So I am at a loss, I had a similar issue before where I'd connect through Kies and my laptop would tell me my phone is no longer responding/stopped working but I was still able to connect via mass storage. So I am at a total loss and I am hoping someone here can help me resolve this issue. Thank you for reading.
[Edit]: FIXED.
Hey guys I tried to connect my nexus 7 to my Windows 7 laptop but nothing popped up it just showed as charging on my n7 I've tried update the drivers and different cables and different laptops too but it's all the same, even fastboot doesn't show up or mtp in twrp, any ideas how to fix this guys?
Anyone got any idea how to fix this problem?
Hey,
Have you tried enabling USB debugging in Settings > Developer Options?
Fobos531 said:
Hey,
Have you tried enabling USB debugging in Settings > Developer Options?
Click to expand...
Click to collapse
Cheers mate but yep I tried that and nothing changed
I'm in the same boat. Had this problem for a long while, almost had my guarantee expire so I had it fixed. Not sure what caused it, or what fixed it. But couple of weeks later I was transfering some files through the now working USB port and accidently touched the cable - the device lost connection mid-transfer and since then I was unable to use the USB to transfer files, or connect the device to anything but the charger..
Along comes the 5.1 OTA which I decide to install and mid-install there was an error and the device soft-bricked - I can't boot it, it shows the Android robot with a red traingle and exclamation mark and 'No command.' written under it, at which point it reboots after a couple of minutes.
I can access recovery and fastboot mode and excecuted a factory reset but to no avail. Does anyone know how to fix the USB so that I can reflash stock and make my device work again?
Also, any ideas if one could bypass the use of the USB port in fixing the softbrick would also be helpful.
Armeddy said:
I'm in the same boat. Had this problem for a long while, almost had my guarantee expire so I had it fixed. Not sure what caused it, or what fixed it. But couple of weeks later I was transfering some files through the now working USB port and accidently touched the cable - the device lost connection mid-transfer and since then I was unable to use the USB to transfer files, or connect the device to anything but the charger..
Along comes the 5.1 OTA which I decide to install and mid-install there was an error and the device soft-bricked - I can't boot it, it shows the Android robot with a red traingle and exclamation mark and 'No command.' written under it, at which point it reboots after a couple of minutes.
I can access recovery and fastboot mode and excecuted a factory reset but to no avail. Does anyone know how to fix the USB so that I can reflash stock and make my device work again?
Also, any ideas if one could bypass the use of the USB port in fixing the softbrick would also be helpful.
Click to expand...
Click to collapse
Do you twrp installed mate?
No, I do not.