My phone will not turn on, go into download mode, or go into recovery mode. The screen is black. Did I lose in Russian Roulette?
EDIT: nevermind, I got it into download mode using my charging usb cable (to the wall not the computer)
Heres hoping I can Odin
Related
Yes, i have THAT bad luck. I was using de Odin3 one-click downloader to restore the original flash for my i9000, and the power shut down during the second phase (COM14 i think i remember). Now the phone boots, shows the At&t screen and then reboots, stuck on a never ending cicle. If i put the usb cable, it doesnt power on. I cant put it on download mode or recovery mode either, is it totally bricked?
Was downloading lag fix and now phone won't do anything but show black screen with touch buttons lit up. Will show battery icon with usb plugged in and will allow me to get in to downloader mode (volume up+down and power) but odin does not show a com port when in downloader mode, but will show a com port when shut plugged in and battery icon showing. I have the drivers loaded, but can't use odin flash to stock rom.
NOTE: I can get into stock recovery but not into rooted recovery.
anyhelp would be appreciated
when you have it in download mode unplug it from the computer NOT THE PHONE!!! just make sure you do that lol then it should pop up from there good luck
just so you know this should be in general and not here
hi forums this is my first post but i need help. I loaded a new rom to my samsung vibrant it was bionix frost with voodoo lag fix and i tried to go back to macnut r14 final it my phone is stuck on the samsung vibrant boot logo it doesnt boot or go in to recovery or download mode any suggestions and or help please i need my phone asap.
Looks like you soft-bricked your phone. Try this method to get into download mode.
1. Take out your battery.
2. Unplug your USB cable, and plug it into the computer.
3. Plug your USB cable into the phone.
4. Hold vol up and down.
5. While holding those 2 buttons, plug the battery in.
That should put it into download mode.
Longcat14 said:
Looks like you soft-bricked your phone. Try this method to get into download mode.
1. Take out your battery.
2. Unplug your USB cable, and plug it into the computer.
3. Plug your USB cable into the phone.
4. Hold vol up and down.
5. While holding those 2 buttons, plug the battery in.
That should put it into download mode.
Click to expand...
Click to collapse
after that what should i do
You research flashing back to stock with odin. All the files you need can be found here. You will need odin program, eugenes no brick file, stock pit file, and stock jfd file. It will get you back to stock . Then re-root your phone download rom manager, flash clockwork mod, and install rom if choice. Its all about researching. Also look in youtube fir how to videos. It's all out there.
Sent from my SGH-T959 using XDA App
I flashed my Arc to UK generic firmware 4.0.A using flashtool.
All went well.
Then I after a using it normally for a while I did a full reset of the phone to remove all personal info and return it to factory state.
I then put the phone away for a few months.
When I then took it out again, it will not boot.
I charged it over night and when I press and hold the power button, the LED beside the USB connector flashes green quickly and that's all the happens. The screen does not come on and it does not vibrate as normally on start up.
No combination of button presses seems to make any difference.
I can connect it to the PC in flash mode, but again, the screen does not come on. Flashtool (0.5) does detect it in flash mode, but it says that it cannot flash the device and says to disconnect it, turn it on and set USB debugging mode. But obviously I can't do that because it won't boot.
Fastboot does not detect the device connected at all.
I am stumped!
A
See the unbrick thread.
Sent Via LT15i - FXP46-CM7
Thanks mate, but there are a few threads about unbricking, which one do you mean?
Is it this one?
http://forum.xda-developers.com/showthread.php?t=1126358
Yes, that is the one!
Looks like it's booting now.
Cheers,
A
Hi, my screen does not turn on, i can feel vibration when it is turned on, i am trying to put it into download mode holding VOL- button and using usb cable, but not working. (it worked before)
Anyone can help me with how to put it into download mode so that i can flash stock firmware using LGUP.
As screen is always black, i cant tell anything.
Did you check to see if it was detected by LGUP? Power it off, connect USB cable to PC, hold volume UP with phone still off and plug in the cable to your phone. Release a few seconds after the phone vibrates to be sure it got into download mode. LGUP should detect it if it made it to download mode successfully. I would also be sure your battery is charged before doing anything.
Do you know what caused the screen to stop working or remember the last thing you did before it stopped? Perhaps there's an internal hardware issue.