Android stopped working - HD2 Android Q&A, Help & Troubleshooting and Genera

I was very happy testing different android builds and never had problems booting into android with haret.
I had Mdeejay eVo Sense installed yesterday, but it booted only once. After reboot I had for 1h the htc-logo and then the phone powered off itself.
After charging I tried other builds, but none of them worked anymore. Then I flashed to newest Duttys ROM. Nothing
Then I tried different Radios. Nothing
I reformatted several times with different methods my SD-card.
Then I reinstalled HSPL3
Flashed Chucky Druid Rom
nothing ...
I tried everything I know... need help

Related

jumping to kernel

have a tmo us hd2
had a past version of android with sense it worked fine. tried a different and got the pause at jumping to kernel so tried a clean version, it worked. ive booted it plenty of times, then tonight it stopped working
so im trying froyostone with sense and now it wont boot either
im on omega v7 newest and radio 2.1.5.28_2
I was on the same problem, i think you have the android files directly on your SD Card? So that is the problem, put them in a new folder android.
That helps me, the first boot was by me also possible, but after that all reboots end in "jumping to kernel"
nope. theyre in the android folder.
and i just tried switching to the 2.12 radio
the strangest part is that is was working the past few days and earlier today...
id understand a certain build not working but why would it randomly stop working.
Have you made, since this problem more reboots. I have on my HD2 sometimes that i must boot 2-3 times to come up
yup, tried multiple reboots and both radios
have you solved a problem? I've similar problem. Each time I turn on the phone - I'm getting this error. Sometimes it helps to remove "cache' folder and some others and restart twice or may be 3 times. But no working 100% solution.
My Results
ppp vr.
Market ok
WIFI ok
BT ok
whitout freezes
little bit more sensitive touch screen
Very good job, DEV team you are masters
When I'm getting stuck at jump to kernel, I normally remove and reinsert the sd card when I booted into WM and most of the time that fixes it.
I (and other members) have found that "Jumping to kernel..." freeze occurs when one is using Windows for a period of time. The solution is usually to re-boot and once Windows loads *immediately* boot into Android. This has not failed me yet! Before I was like you, wondering why sometimes I get the freeze and other times I don't...but a fresh boot into Android solved my issue.
Hope this helps.
have you changed the kernal lately or switched any file , or renamed anything
have you tried changing the startup.txt file? look around for that solution..it has been posted here many times.
I would give you a link but I am posting from my cell so it would be a little difficult.
Sent from my HTC HD2 using XDA app on darkstone froyo sense v2

Dreaded screen freeze.

Hi all, I'm new to android, and after trying several different builds am ready to give up trying (even tho I LOVE android) due to the problems I keep having.
When I boot into android, it works fine for a while (varying from 5 minutes to over a day) then I get a frozen screen, which stays frozen even after re-booting into Windows. Sometimes this stays frozen for HOURS and makes the phone unusable.
The last attempt was with Hyperdroid v1.6 and it worked fine for 15 minutes, (yes I turned off the auto -rotate display) then it froze up.
If anyone has any ideas/pointers/advice, it would be MAHOOSIVELY appreciated
Please post some more information including your radio and rom versions.
When I have problems I always start from a clean slate including a task29, flash the latest radio, rom and download a new build to a formatted sd card. Try builds that use different kernels.
Beyond that you can start swapping kernels different kernels into your build.
i think I've sorted it thanks polo735, after reading your post I finally researched task29, ran it and reinstalled everything and it seems (touch wood) to be stable now Happy Days!!!! Many thanks

[Q] help pleeease, phone app force close

I installed MCCM GB V2.0 Gingerbread HoneyComb Sense theme [kernel tytung_r5] and for the beginning everything worked fine. But after installing some apps and rebooting, the phone app gave robotic sound and asked for force closure. I tried to reinstall, reboot several times but same problem exists. I formatted sd card with SDFormatter 2.0 completely. Still prb exists. What am I doing wrong or is this a general problem everyone having? HD2 details as follows: WM 6.5 Build 1.66, Radio 2.10.8, HSPL 2.08. I would very grateful if someone could help me out with this prb.
How did u flash your ROM ?
Did u use CWM or DFT method ?
muzap2000 said:
I installed MCCM GB V2.0 Gingerbread HoneyComb Sense theme [kernel tytung_r5] and for the beginning everything worked fine. But after installing some apps and rebooting, the phone app gave robotic sound and asked for force closure. I tried to reinstall, reboot several times but same problem exists. I formatted sd card with SDFormatter 2.0 completely. Still prb exists. What am I doing wrong or is this a general problem everyone having? HD2 details as follows: WM 6.5 Build 1.66, Radio 2.10.8, HSPL 2.08. I would very grateful if someone could help me out with this prb.
Click to expand...
Click to collapse
No, I just flashed it to sd. and another problem with my phone is I cannot flash anything radio, wm custom, etc. when i start to flash anything via active sync, RUUCustom starts bootloader on the phone, shows the progress bar (bar stays at 0% always) and it stays for approx. 2-3 minutes and gives an error "connection error" and goes to recovery stage. I remeber last time I just falshed HSPL. That's it. Since that time I can't flash anything like radio, magldr etc. That's why I flashed android to sd by just copying android folder to sd and running clrcad.exe and haret.exe. I'm a novice and don't understand much. But I have general idea. If anyone can help me to sort out above problems, I would be very grateful.
Got the same problem with that build. I heard that it's caused by some sort of memory problems, Anyway I didn't found the solution.
Could be left over data from previous build, delete data of the apps that keep crashing.(Dialer, Dialer storage), reboot, try again.

[Q] Nearly all NAND builds giving constant lock ups -help!

I've been playing with different android builds for almost a year. Before NAND I've always had mixed luck and after playing with many radios and builds I ended up using Shrubcraft's stock build as the only reliable one I could find.
Finally, I put Cotulla's first stable Desire NAND on at the beginning of the year and it has worked fine until recent I started having a couple freeze issues while using certain apps.
So here is my problem... I've caught up to speed with the new magldr and tried to flash 3 different newer builds. HyperDroid-CM7.v1.0.3, NexusHD2-Gingerbrad v2.4, and HyperDroidGBX-v10. NONE of them work.
All give me problems with robo voice, which I can solve by shutting off key tones. After that I'm still stuck with sluggishness, sleep of death, and random lock ups (twice while only trying to run the initial setup).
I've tried formatting my sd card, cleaning all of the data/cache with AD recovery, trying 4 or 5 radio combos with each. I've even looked through peoples posts and found the exact ROM/radio combo that they are saying is stable and trying those with no luck.
I'm running out of ideas. Any thoughts?
Currently:
HTC HD2 - TMOUS
Radio: 2.12.50
ROM: Cotulla's stable Desire NAND

My HD2 wont boot past the HTC screen plus if it does it freezes on the lock screen.

Hey guys,
My situation is this, I bought a HD2 from ebay and it had no rom on it at all, So like everyone else here I flashed the stock rom and it worked perfectly except for one freeze up that I can remember.
Then I continued looking through the forums and found that Android could be flashed onto NAND so like everyone else I did it.
After about two days of use the phone started freezing and shutting down every time I went to play an app for more than five minutes.
The problems I have now -
I can't re install the HD2 stock rom (2.10) because it gets stuck at 8% and decides to give me a 204 error.
I tried re installing the HD2 stock rom (1.48) and that just leaves me frozen and hanging at startup
Now in a last ditch effort I've used task29 on my device and then install stock rom but I still get stuck at boot screen. So I then flashed this Version 6.5.3.1.4b custom rom
So currently my device is useless.
I really would like Android 2.2 running smoothly on my device again so any help is welcome.
Device information -
Hardspl: 2.08HSPL
Radio: 2.15.50.14
MAGLDR 1.13
Some pictures of my device.
Uploaded with ImageShack.us
Uploaded with ImageShack.us

Categories

Resources