Yesterday I flashed my Bell SGS with the latest H2 firmware and while I was
waiting Kies to download, decrypt and flash the firmware I searched for the temp
folder that Kies is using.
I found out that Kies is using user's temp folder.
After decrypting the firmware you will see in that folder the firmware
with the name BOOT_IN.tar and the SS_DL.dll
Now with the registry hack we can download any official firmware
and start experimenting with different modem, or kernel or bootloaders.
What I have not tried yet is how to break up the firmware in PDA, CSC and MODEM
If anyone knows that would be great.
Related
hello friends i Wanted Offical Firmware For I9000M Full Modem,PDA,CSC my phone is bricked but still i can go in download mode and can flash with firmware
look for JL2 either on this forum or on samfirmware
zorxd said:
look for JL2 either on this forum or on samfirmware
Click to expand...
Click to collapse
Full firmware list
but there is no modem and csc files . as my phone is briked i wanted all files to recover it by mistake i flashed it with i9000 firmware but still i can enter in download mode so i think with full firmware i can revive it
but there is no modem and csc files . as my phone is briked i wanted all files to recover it by mistake i flashed it with i9000 firmware but still i can enter in download mode so i think with full firmware i can revive it
But that is the stock full firmware .
What you are asking for is a copy of the original provider firmware that came with your phone ???
Unless you saved a copy you will have to use the official generic firmware from the link given .
jje
You don't need the modem and csc files for an i9000m if you're using the stock firmware..
If it is the Canadian bell firmware you have been and still looking for then I only have the latest UGJL2 here: http://www.multiupload.com/V0YY1TFE7S
You can re-partition with this firmware, it's a 3 files firmware, no boot.bin or Sbl.bin are included, double-click to extract and flash.
Hi,
I updated my p7510 that i bought in canada (xac) with firmware xwkg7. I live in germany and wanted a european version of the fw.
I did the following:
-Update tab (pit, bootloader, csc, code) using P7510XXKFC
-Update tab (code) using P7510XWKG7
After the update recovery gave me strange error messages (/preload cannot be mounted and so on). However, I installed CWM, so I do not have these errors anymore.
I also did factory reset, wipe cache...
However, since I updated the firmware I cannot use "about tablet->software update->update" anymore. I always get the following error message:
"Failed to update firmware due to network or server problem. Try software update later (Setting->Software update->Update) or using PC software (Kies)"
Before the update this worked just fine (although no update could be found). I dont have network problems, as I can browse, chat etc.
Since the update Kies is also not showing my current firmware version on my tab.
I guess it has something todo with the country where I bought the tab (canada) and the rom that i used to update (europe version)?
Do you know or have ideas how I could fix this problem?
I dont like the feeling that somwthing is not working on my tab
Thanks!
Klaus
Try to reflash the stock recovery with odin and factory reset, that will recreate the needed data structure on the tab and try again.
Or maybe its because you mixed incompatible code/csc.
Start over.
I found the solution.
I described it here:
http://forum.xda-developers.com/showthread.php?t=1280069
In short: csc files were completely missing. This caused all my trouble.
Hope this will help someone.
Klaus
I have the same problem.
So if I want to fix I have to install csc and PDA files at the same time?
Does that mean all my data will be erased?
Could I just use csc?
Where can I find these files?
Sorry for the 1000 questions!
I am currently on vacation and can not tell you the firmware versions, but at Sammy firmware I found two European rom versions. One had also a csc file that I flashed.
Flashing the original csc file with Odin will do a factory reset. You could also download a custom rom, extract the csc stuff and copy it to /system,if you want to avoid factory reset. You have the choice
But if you use an original PDA/code file and flash it with Odin, csc files are not included and must be added afterwards somehow!
Sent from my GT-P7510 using Tapatalk
Hey guys,
I installed xtrestolite on my G900F and changed the bootloader and modem of my device before installing it. First problem i had was with CSC. It is a single CSC and i couldn't install my countries CSC on it. That's why i went back to stock. I installed Kit Kat firmware that i downloaded from sammobile and then changed CSC to my countries CSC. Then i updated firmware to lollipop using Kies3. But installing stock rom didn't change bootloader version or modem version. Now i have kitkat bootloader version, kitkat baseband version and lollipop firmware version all different and i want to them all to be the same(latest lollipop). Is there any way to do this without downloading stock rom from sammobile again ? And if not, then can i just put the tar.md5 file that i will download from sammobile in bootloader, pda and CP at the same time and install with odin ?
Thanks in advance !
You do not need to re-download or re-install your ROM. You need to download your bootloader and radio from somewhere, then flash those with ODIN.
Just an FYI, the modem doesn't always like to stick so you may need to flash (auto-reboot disabled), pull the battery after odin says "success", then flash again immediately.
Sean89us said:
You do not need to re-download or re-install your ROM. You need to download your bootloader and radio from somewhere, then flash those with ODIN.
Just an FYI, the modem doesn't always like to stick so you may need to flash (auto-reboot disabled), pull the battery after odin says "success", then flash again immediately.
Click to expand...
Click to collapse
Hey thanks for the tip ! I just downloaded stock firmware but i don't know how to extract bootloader and modem from tar.md5 file and then make them odin flashable. I uploaded image with all the files that are in my tar.md5 file. What of these are for bootloader and what for modem and how do i make them odin flashable later ?
Thanks in advance
Hi,
i am trying to fix software on my note3 but i have problems finding the right files.
There is Bootloader, PDA, CSC and Baseband but i don't know how to upgrade it to the correct versions.
For example i found Version OK9 here: http://forum.xda-developers.com/galaxy-note-3/general/direct-download-bootloaders-modems-t3258803
But there is no file to update PDA, CSC and Baseband?
I installed the KERNEL file and it changed the Kernel. Did not try RECOVERY yet because i think it could overwrite the Custom Recovery TWRP that is installed now.
In older post i also found some "CP" files for OJ6 and OK6 and they installed new version for PDA but i can not find them for OK9?
Can anybody please explain the different files and how to find the right versions?
I downloaded two files to update bootloader and PDA to OK6 but i can only update the Bootloader but PDA Version does not change.
CP_N9005_OK6.tar.md5
BL_N9005_OK6.tar.md5
The first file is supposed to update the PDA or not?
CP is modem/baseband and it does not update PDA. AP is PDA. You can find complete firmwares from http://www.sammobile.com/. These packages contains all parts together and you can find installation instructions for example from https://www.youtube.com/watch?v=DdDgaqsYrRs.
kuitsu said:
CP is modem/baseband and it does not update PDA. AP is PDA. You can find complete firmwares from http://www.sammobile.com/. These packages contains all parts together and you can find installation instructions for example from https://www.youtube.com/watch?v=DdDgaqsYrRs.
Click to expand...
Click to collapse
Ah i see, thx for your help!
Hm so maybe it could be a good idea to install a untouched Stock Rom first and then go to modified image?
I have now installed N9005XXUGBOK6_N9005DBTGBOI1_DBT Stock Image with Odin.
When i want to go back to this image: http://forum.xda-developers.com/galaxy-note-3/development/rom-lp-tw-rom-t3027148 is it enought to just install it or do i need to wipe anything before?
I don't want all the samsung adware...
Oh it even killed the philz touch recovery...
kuitsu said:
CP is modem/baseband and it does not update PDA. AP is PDA. You can find complete firmwares from http://www.sammobile.com/. These packages contains all parts together and you can find installation instructions for example from https://www.youtube.com/watch?v=DdDgaqsYrRs.
Click to expand...
Click to collapse
how to flash only this PDA/AP & Bootloader via odin?
BL ver : A515FXXU3BTI2
AP Ver : A515FXXU3BTI2
Neither of those are for Note 3 based upon what you have posted .
BL in bl section AP in ap section on Odin .
Hi Guys,
I've got a Galaxy A5 2016 (SM-A510F DBT) from a friend. The device seems stuck at the last system update and does not start anymore. Since he did not backup his data, I try to flash the latest firmware via Odin. I read that there is now a 4-part firmware version for Galaxy devices and two CSC files. The Home CSC file supposedly does not reset the data when they flash, but I can only find the regular CSC files. The firmware was loaded with SamFirm.
Someone an idea?
Thanks!