[Q] SD Card invisible - Shift General

Hi, I need expert person help. I got HTC Shift from Ebay. It Windows Mobile side it is SD card invisible and Bluetooth can't turn on Error message" There is no Bluetooth hardware installed on this device." is it meaning can't use Bluetooth with Windows Mobile side right? I think something wrong with SD card. Please be advice/thanks.

Sorry Dude, actually you cant use BT and SD on the WinMo-Side.
All Informations are right in this Forum.

Related

SD Card will not reformat

Firstly I should say Hi now I have finally registered here after lurking for a while
Please excuse me if you have seen this posted on another site too, I really need help with this
When I put my SD card into my card reader or laptop (I have tried it on both), I get the message "The Disc in drive E: is not formatted, would you like to format it now?" So I press yes and it says... "The Disc in Drive E: Cannot be formatted".
Any ideas?
This is so frustrating, I know I can install things through activesync but I am trying to put TomTom back on which I need to do via the card reader. (BTW, I would never have got TomTom installed the first time around if it wasnt for this site )
Please help.
Are you using a fairly recent USB2 card reader or one you've had for a while. If its not a new one then you're probably going to have problems with a 2G sd card.
I bought it off ebay about a month ago. so it should be fairly modern, it doesnt work in the slot in my laptop either. I know that 2 gig cards are ok on the laptop as I use the camera SD with it no problems.
I have used SK Tools to reformat it, having done this I lost all my programs on the phone so I had to hard reset. After this I can open up the stoarge card on the laptop but when I try to copy my Tomtom over it comes up with a 'write-protection' error, no problems moving cab files over and installing via activesync. Although I cant install TomTom this way because of the file conversion.
Im wondering now if maybe the SK tools format did the job and maybe my problem lays with Tomtom, it worked before though so I just dont understand it.
Thanks for your reply. I shall have to try that program.
I bought it off ebay about a month ago. so it should be fairly modern, it doesnt work in the slot in my laptop either. I know that 2 gig cards are ok on the laptop as I use the camera SD with it no problems.
I have used SK Tools to reformat it, having done this I lost all my programs on the phone so I had to hard reset. After this I can open up the stoarge card on the laptop but when I try to copy my Tomtom over it comes up with a 'write-protection' error, no problems moving cab files over and installing via activesync. Although I cant install TomTom this way because of the file conversion.
Im wondering now if maybe the SK tools format did the job and maybe my problem lays with Tomtom, it worked before though so I just dont understand it.
Thanks for your reply. I shall have to try that program.
I had some problems with a 4gig sd card showing as write protected like yours.
I solved it by putting a folded piece of the thin backing film from a screen protector on top of the sd card when I put it in the reader.
The write protection is a small contact inside the reader and it just needed this extra packing to put a bit of pressure on the contact to make a connection.
after doing that for a week it now does not need the film so I assume that the contacts inside the reader were either a bit dirty or had some sort of coating that has now worn off.
Worth a try ??
Thanks, I really dont think its the card reader though as it doesnt work on my laptops SD slot either, and when I try to take the files for Tomtom over via Activesync it does the same thing. Installing Cab files is fine though. Im starting to think its a TomTom problem, which is odd as it worked before on my old card, both Sandisk Ultra II.
Thanks, I really dont think its the card reader though as it doesnt work on my laptops SD slot either, and when I try to take the files for Tomtom over via Activesync it does the same thing. Installing Cab files is fine though. Im starting to think its a TomTom problem, which is odd as it worked before on my old card, both Sandisk Ultra II.

problem with mini sd card

bought a new 512mb Kingston Mini sd card . I cannot seem to transfer anything to it. Both my PC and the Wizard `see' the card and register the correct size but I cannot transfer anything to it. Any help appreciated. I read somewhere you need to format a new card on the wizard ??? how do I do this
:roll:
you can use StorageTools
Hi Pat thanks for the reply.
What is the executable file you suggest ? is it for using on my PC or the wizard? whats the method ?cheers
its the desktop instalation of storage tools.
http://www.softwinter.com/storagetools.html
download link - http://www.softwinter.com/download.html
Its just pat hotlinked the exe file
yes, sorry. My post could have been a bit more explicit. By the way, what do you mean when you say you can't transfer anything to your card?
Is it just using ActiveSync or did you try your card on your PC with a card reader? If you do have a card reader then you don't really need storagetools . Just format it on your PC and it should be allright.
Another solution is to get WM5Storage (see this post) It will turn your Wizard into a USB drive so that you can copy files without the hassle of activesync or play music files on the card from the desktop, and since it will be seen as a usb drive...format it!
The guy who came up with WM5storage is a genius, I had been looking for this kinf of software ever since I had my fisrt smartphone years ago
Good luck
Hi Pat thanks thats brilliant.
I use a USB reader for the card but it is placed into a SD holder first because my 7:1 PC reader doesn't accept mini SD .
I can see the card and it registers the correct size 512Mb It seems to be accepting drag n drop in explorer and I can see the burn led writing to the card.
When I put it in the wizard it registers the card and offers to find the files so far so good. It then sees the files and transfers them to `libray'?but they don't show up in either the wizard's explorer or win media ?
well that was an interesting 15 minutes :shock:
Clicked on the link Danny gave and got a lockup followed by a BSOD from which the only escape was pull the power lead and reboot. I would advise anyone to treat with caution.
Hello again peanut!
You mean that just by clicking on a the link you got a BSOD? Amazing!
Back to your SD Card, have you tried 3rd party file explorer such as gsfinder (my favorite) or resco explorer to see if they access your card properly? And also try TCMP instead of WMP. For one, it's much better anyway and I've read somewhere (here I guess) that some people had trouble getting WMP to "see" their media files on the SD. Anyway, I guess it would be a good idea to reformat you card in either FAT32 or FAT16 with 512 bytes cluster so as to waste the minimum amount of storage
It may be related to a prolem I have periodically with firefox not loading . Ithink zone alarm is involved as well so I may need to re-install the lot
thanks for the suggestion about TCMP and yes I'll try a fresh format see what happens cheers
The link in my post was found by right clicking Pat12's link and looking at the URL.
All the links are from the same website and i seriously doubt anything is wrong with any of them, check your firewall as it can interupt file transfers and cause things to hang.
My mini sd card and my friends weren't working for banana's. untill i formatted them on the pc unsing a card reader. now they work fine.
never found out why the cards weren't correctly formatted to start with, guess i'm not bothered as they work great. they were also kingstons
thanks for your input RJ webb I'll try a re-format.
Danny your link is fine it was probably my zone alrm plus the drive had gone to sleep lol no blame mate just thanks for your help
Is it a branded card, where did you get it from?
I bought a 2gb unbranded one and it sometimes doesn't show up in the device, and sometimes corrupts the data on the card - so I assume its faulty/dodgy.
I've ordered a sandisk one to replace it with, hope that one works better.
Hi Scotland its a Kingston card I bought off ebay. Probably a crap card knowing my luck. I'll try re-formatting it on another computer maybe that will help.
peanut said:
bought a new 512mb Kingston Mini sd card . I cannot seem to transfer anything to it. Both my PC and the Wizard `see' the card and register the correct size but I cannot transfer anything to it. Any help appreciated. I read somewhere you need to format a new card on the wizard ??? how do I do this
:roll:
Click to expand...
Click to collapse
I hate to ask the obvious, but is it locked with the little switch?
ha ha not so obvious actually because it was at first before I noticed it had a lock the other day. Thanks for the suggestion

sd card question

ok this is kind of wierd but i bought my wizard from a friend. she formated the card to get all the stuff off. and by the time it gets into my hands it doesnt work anymore. the sd cards in the slot and my phone doesnt know its there, also activesync doesnt know its there. so does any one know if there is anything i can do to fix this myself?????? some program or mod?????
but now that i think about it another question comes to mind. is it that card or my phone just f-ed up have know clue????
ok i just read some before this one and my sd is real and its in a 8125 if that helps
The card probably just needs to be reformatted again. The easiest way would be to put it in a card reader and reformat it with your computer. Formatting it with a digital camera sometimes works too if you don't have a card reader.
great idea but each time i put the sd card in something i doesnt act right, for example in my wii, "cant read sd card" in my camra, without it i loads find but when i put it in the on light just comes on, the screen doesnt even come up lol, i put it in my printer/fax it said "error error" with the light flashing im not giving the up on it 10 bucks for a 2gb come on who else does that. anyway i'm also sry for post in the forum didnt see the accessories link, i got so happy to find this place i forgot forum manners.
Sounds like the only thing you have left to try is the card reader. If you don't have one, the easiest thing you can try is to download and install on your phone WM5 Storage, you can get it here - http://www.freewareppc.com/communication/wm5torage.shtml. Then activate it before you connect your phone to the usb cable and it will detect it as a mass storage device and allow you to format it again, as long as the cards not bad.
Was it formatted on an 'oldish' PC or laptop because it may have been formatted to the wrong spec as anything above 1Gb needs a version 2.0 formatter.
Browse the SD manufacturers sites for an SD format utilty (Toshiba, Sandisk, etc) they can sometimes recover them.
wow thank i dont have one but i was just going to take it to office depot and ask if they can do it for me but that cool
xeno1 said:
Sounds like the only thing you have left to try is the card reader. If you don't have one, the easiest thing you can try is to download and install on your phone WM5 Storage, you can get it here - http://www.freewareppc.com/communication/wm5torage.shtml. Then activate it before you connect your phone to the usb cable and it will detect it as a mass storage device and allow you to format it again, as long as the cards not bad.
Click to expand...
Click to collapse
Thanks for the tip! I thought that my sd card slot on my phone was jacked up. It worked for me!

Problem with 2G kingston miniSD card

This is my first posting to this forum, so bear with me if my problem already being answered (even though I could not find it when searching the tread )
My Trinity could not detect the 2G kingston miniSD card. When I try to detect on the computer via the card reader, I got the message the disk is not formatted and it asking me either to format it now? When I click "YES", I got the error message about the disk cannot be formatted. When I check on Disk Management, it shown the disk is Unreadable.
This miniSD is never being used before (even though I bought it awhile back). I just wondering if this miniSD already damage somehow. I cross my finger it is not a problem with my Trinity ~ hate to send it for repair because I just upgrade the ROM to WM6 yesterday with latest HTC official rom
Any input about this problem is very much appreciated.
if the card reader cant work with it and your pda will not work with it
then for it to be an issue with your pda it would require there to be an
issue with cardreader too
chaches are the card is dead
Yes indeed!!!
Rudegar said:
chances are the card is dead
Click to expand...
Click to collapse
Thanks Rudegar. Yes it is dead , kind of suck considering that card is never being used. When put on a brand new card that I just bought (2GB PenDrive miniSD for USD25 (RM83)), the PPC can access it OK. Did any of you know how to resurrect the dead miniSD card? Is it possible? Sorry for stupid question, I'm newbie to PPC and SD card
hi.
it could be a hight density minisd card. there is some patch to fix it.
search it here, somewhere. it's a know issue!
try to use another minisd, but with less size to prove it.
i home is not the phone problem!
The same card works fine with my trinity.
Yours is probably out of order.
Yes dead
Yes it is because no problem when I using a new miniSD card.

Dual micro sd card adapter?

i am currently running my htc tynt on windows mobile 6.1 and i have beendoing some research for one of those micro sd video out cards. the onl problem is if i get one i will no longer be able to use my sd card that has all my music and videos on it. i have been on mp3car forum searching, i want to install a monitor in my car and use my tynt as in car computer. Is there any product oavailable that allows use of 2 sd cards and does my version of windows mobile even support that type of feature?
any help would be appreciated.

Categories

Resources