Any brave volunteers? - Captivate Android Development

I have built a Froyo ROM from source. I got the Captivate vendor files from Krylon360 over at Cyanogen, updated them, and built a ROM. I was able to get the leaked Froyo Captivate system.img and extract it so I could get the files required for our device. The ROM build cleanly and I was able to restore it to my device but since I have an Eclair kernel it will not boot. I actually read later in a forum that an Eclair kernel won't boot a Froyo system.
Anyway, I am looking for anyone who has a Captivate with the leaked Froyo build installed to try and restore my ROM. It will not brick your phone, I promise. I took a Nandroid backup before restoring and when I saw why it wasn't booting in logcat I booted into recovery and restored my last backup.
I just want to see if this guy will boot properly with a Froyo kernel and also see if I have all the device drivers working, etc.
Thanks!

Just replied to your other post Let's do this!

Sounds pretty awesome, but why didn't you just flash a Froyo kernel on your phone? Upload it and post up a link so we can see what you have.

gtg465x said:
Sounds pretty awesome, but why didn't you just flash a Froyo kernel on your phone? Upload it and post up a link so we can see what you have.
Click to expand...
Click to collapse
He's not running windows and therefore can't use ODIN to swap kernels.

I was planning on flashing to Cog beta 8 today anyway.... I can give it a try.

Flashing requires Odin which requires Windows which I do not have.
I will post a dropbox link in a few minutes.
I built without kernel so if the ramdisk.img gives you grief, exclude it from the backup and also remove it from nandroid.md5.
In fact you should only need to restore system.img.

Just saw the above post...I'll be anxiously awaiting the link.

Thanks, guys. Remember, I am doing this for ALL OF US.
http://dl.dropbox.com/u/6995251/full_captivate.tgz
Like I said, you should only need system.img. So basically, edit nandroid.md5 and strip out the checksums for the other two files. Then copy nandroid.md5 and system.img to your recovery directory. Mine is /sdcard/clockworkmod/backup.
Report back what you find.

If you have the sdk installed, please use adb logcat to get me any details. I am working with a couple of guys who work on both Cyanogen and Cognition to hash the details out. Like I said, I got all the hardware-specific files dialed in so we should be okay.

downloading now and will give it a shot..i have a test captivate so I dont mind bricking it.

aqtrans said:
Just saw the above post...I'll be anxiously awaiting the link.
Click to expand...
Click to collapse
Thanks. I wanted to go the AOSP route because I think what happens is.. People are modding the factory carrier images but you don't always know what's in there and can end up with crap you don't need. Plus, this is the latest 2.2.1 from AOSP.

Restoring it now...

vunuts said:
He's not running windows and therefore can't use ODIN to swap kernels.
Click to expand...
Click to collapse
You can swap kernels using redbend if you have 2e recovery (which he should considering that he is on Eclair). You can also flash using the open source alternative to Odin that is available here.

Any screenshots?
What are the specs of this Rom? Is it completely AOSP?

rajendra82 said:
You can swap kernels using redbend if you have 2e recovery (which he should considering that he is on Eclair). You can also flash using the open source alternative to Odin that is available here.
Click to expand...
Click to collapse
Please point me to this alternative.

2kgt said:
Any screenshots?
What are the specs of this Rom? Is it completely AOSP?
Click to expand...
Click to collapse
100% AOSP 2.2.1 with Samsung-specific stuff pulled in via extract-files.sh.

gtg465x said:
Restoring it now...
Click to expand...
Click to collapse
Awesome. If it comes up, check system info to see if the name and all that is correct. Also see if Bluetooth, WiFi, etc work.

gdanko said:
Please point me to this alternative.
Click to expand...
Click to collapse
Heimdall is it's name. I can attest for it's stability. I've used it quite a few times on Archlinux when I didn't feel like booting into Windows. One note is you always need to give it a PIT file.

you want this loaded thru ODIN?

I'm getting MD5 mismatch... looking into it.

Related

[REQ] 2.3.3 Baseband in an update.zip

I think this would be a very useful file, because I know a lot of people are hesistant to update to 2.3.3 because of the removal of Facebook sync, but are still having issues with reception, reboots, etc. If the fixes are present in the baseband, it'd be great to be able to easily and safely update only the baseband, while staying on 2.3.2/CM7/custom ROM.
I'm not exactly sure of the feasibility on the Nexus S, but I know it was done before on the Droid when I owned that device.
According to Netarchy, the baseband update in the OTA is "patch-based", so it's not the full radio image, but rather changes to the existing one. So the full updated image would have to be created by applying these patches to the existing baseband. I'm not sure if that's possible to do off of the device, or if it needs to be extracted off a 2.3.3 device.
Anyways, I'm just putting in this request/suggestion. Please let me know what you guys think. Maybe if there's enough demand for it, a dev would undertake this
I like this idea.
Sent from my Nexus S using XDA App
Something like this?
(file deleted)
Warning! Completely and utterly untested!
It would be prudent for others to double, triple and quadruple check this. I just repackaged f182cf141e6a.signed-soju-ota-102588.f182cf14.zip after deleting everything not radio-related.
Edit:
Here's my collection of Nexus S radio images:
http://forum.xda-developers.com/showpost.php?p=11686273&postcount=14
shrivelfig said:
Something like this?
http://www.mediafire.com/?fqz11p9seawbs02
Warning! Completely and utterly untested!
Click to expand...
Click to collapse
Can i flash it from cw?
zadnica said:
Can i flash it from cw?
Click to expand...
Click to collapse
I think you have to. The stock recovery will probably refuse since it's not signed by Google.
shrivelfig said:
I think you have to. The stock recovery will probably refuse since it's not signed by Google.
Click to expand...
Click to collapse
I have a custom recovey (cw) + CM nightly build #7. Make i flash this baseband?
zadnica said:
I have a custom recovey (cw) + CM nightly build #7. Make i flash this baseband?
Click to expand...
Click to collapse
It's risky, because it's not tested yet. I think it would work, but I have little experience with Android development.
The ROM is (I think) divided into several sections, like recovery, system, boot, and radio, so flashing just the radio should not mess up anything else.
I didn't end up trying that update file posted above, as I found another method to get the 2.3.3 baseband. I've written up a little guide here:
http://forum.xda-developers.com/showthread.php?t=971239
It does require fastboot, but will surely work.

[Stock] [UCKF1][06/29/11] UCKF1 No Bootloaders! 1 click or Full Odin Back To Stock GB

I am not responsible for any damage to your phone, computer, home, girlfriend or family pet. By using this, you release the creator from any liability. ​
I would like to thank icezar1 for his help with this project. I could not have done this without him.
I decided to start this thread because I saw several roms saying "flash back to stock Gingerbread", but they usually involved bootloaders, increasing your chance of bricking your phone. I searched and the closest thing I found to a safer way was a group of stock I9000 roms, but they were deodexed and zip aligned. Since we are using Captivates, I really wanted something designed for our phones, so I made this.
This is stock UCKF1, without bootloaders or a pit. I repackaged the rom (minus bootloaders/pit) into 1 file. The original firmware was downloaded from samfirmware.com. Also, I have tested this on my (only) phone, and it works.
The 3 file version was also downloaded from samfirmware.com. It is the exact same as stock, but it doesn't have bootloaders or a pit. I also tested this package on my (only) phone, and it works.
You will need 7zip to unpack the file. If you need 7zip, you can get it here.
If you haven't already upgraded to the new I897 Gingerbread bootloaders, you can get those >>HERE<<.
Stock UCKF1 No Bootloaders
Odin 3 File No Bootloaders
In the past, some phones have not responded well to 1 click flashes. If your phone is one of those, please don't use this. Use the 3 File version for Odin 1.8x.
Please make sure that your usb cable is plugged into a port in the back of the computer (#1 port on a laptop).
You will lose root by flashing this.
You will lose CWM by flashing this.
This is a wipe package, so don't forget to backup.
Instructions
0 Optional Reboot computer before beginning
0 Optional Convert to rfs (if on ext4)
0 Optional Wipe cache, wipe dalvik cache, clear Voltage Setting(if overclocked/undervolted), do a factory reset.
0 Optional Remove sim card and external sd
Download package
Extract with 7zip
Open One click or Odin 1.81
**place files in corresponding slots for odin 3 file only**
Put phone into DL mode
Check to see Odin recognizes phone (you will see the yellow box)
Click Start
very nice
10 char
thanks for doing this! This is very convenient!
Can we get a deodex/zip aligned version please?
Sent from my SAMSUNG-SGH-I897 using XDA Premium App
Lancez said:
Can we get a deodex/zip aligned version please?
Sent from my SAMSUNG-SGH-I897 using XDA Premium App
Click to expand...
Click to collapse
I don't think there is a deodex/zipaligned KF1 out there yet. Some of the other folks in the stock thread (last i heard) were having problems with the deodexing. I really did this just as a flash to stock method before flashing a rom.
mrhaley30705 said:
I don't think there is a deodex/zipaligned KF1 out there yet. Some of the other folks in the stock thread (last i heard) were having problems with the deodexing. I really did this just as a flash to stock method before flashing a rom.
Click to expand...
Click to collapse
i've been trying to deodex the damn KF1 for 3 days now and still can not push it back to /system, saying the folder can not be found. well, i guess i'll have to stay with cog5 for a while until someone figure it out
Lancez said:
i've been trying to deodex the damn KF1 for 3 days now and still can not push it back to /system, saying the folder can not be found. well, i guess i'll have to stay with cog5 for a while until someone figure it out
Click to expand...
Click to collapse
Good Luck!
Lancez said:
i've been trying to deodex the damn KF1 for 3 days now and still can not push it back to /system, saying the folder can not be found. well, i guess i'll have to stay with cog5 for a while until someone figure it out
Click to expand...
Click to collapse
Isn't Cog5 deodex'd? It says so in the Cog5 features list. I'm sure if you shoot designgears a PM he can help you out.
designgears said:
Features:
Based on I897UCKF1
Rooted / Deodexed / Insecure Kernel (adbd always root)
Click to expand...
Click to collapse
How is this different than the other UCKF1 one-click?
http://forum.xda-developers.com/showthread.php?t=1127249
acdbx said:
How is this different than the other UCKF1 one-click?
http://forum.xda-developers.com/showthread.php?t=1127249
Click to expand...
Click to collapse
This is also a one click, but it doesn't have bootloaders (boot.bin and sbl.bin). Since bootloaders will cause a permanent brick, i thought it was kinda foolish to flash them just to return to stock before flashing a rom.
id10terror said:
Isn't Cog5 deodex'd? It says so in the Cog5 features list. I'm sure if you shoot designgears a PM he can help you out.
Click to expand...
Click to collapse
yeah, but DG have made a lot of mods on cog5, i want something really close to stock one. i have sent PM to DG before and he never replied me, i guess he was busy.
So if I just wanted stock gingerbread I can use this? Scared to jump the boat!
smanzor88 said:
So if I just wanted stock gingerbread I can use this? Scared to jump the boat!
Click to expand...
Click to collapse
Only if you have the KF1 GB bootloaders already installed.
If i used the regular stock kf1 1click w/ bootloaders and then flashed cog5 and then used the regular stock kf1 1click w/ bootloaders to go back to stock kf1 would i brick? Since they are the same bootloader?
dsilvan55 said:
If i used the regular stock kf1 1click w/ bootloaders and then flashed cog5 and then used the regular stock kf1 1click w/ bootloaders to go back to stock kf1 would i brick? Since they are the same bootloader?
Click to expand...
Click to collapse
Sounds like you should ask in the cog5 thread. My package doesn't have bootloaders.
dsilvan55 said:
If i used the regular stock kf1 1click w/ bootloaders and then flashed cog5 and then used the regular stock kf1 1click w/ bootloaders to go back to stock kf1 would i brick? Since they are the same bootloader?
Click to expand...
Click to collapse
No, you wouldn't brick, unless something interrupts the bootloader flashing process.
The whole point of this 1-click with no bootloaders is to be able to flash to stock without running the risk of bricking your phone from a bad flash. There is no way to truly brick your phone with this 1-click since the bootloaders are never touched.
With that said, you should only use this 1-click if you have already flashed the KF1 bootloaders at least once before.
ok thanks i didnt think it would brick
Nice, a I897UCKF1 Odin-1-Click Gingerbread flash to stock with no bootloaders.
No more flashing to Eclair for a fresh start. I like it.
Great idea,
IDoMy0wnRacing said:
Nice, a I897UCKF1 Odin-1-Click Gingerbread flash to stock with no bootloaders.
No more flashing to Eclair for a fresh start. I like it.
Great idea,
Click to expand...
Click to collapse
Thanks. I've been thinking about doing a 3 file one for odin, too. Some people have phones that don't like one clicks.
And some of us prefer to use heimdall, so 3 file would be great.

[Leak,Partly][Megaupload] /system of Official GB Rom packed as .7z

Megaupload:
http://www.megaupload.com/?d=ICRBZ2C1
115(by MaybeAnyone):
http://u.115.com/file/bhzboskp
Size: 150.86 MB
Just include all files under /system, may be no use at all. Since someone leaks it, I post it here
or maybe you could investigate it for new features.
PS:Find the "**下载" button, press it, your download should start or Use google translation.
Edit: someone has got the .sbf, but without signature, it can only be flash to engineering device. So he leak the /system only.
we get the sbf but its unsigned...
Sooo I'm back from my holiday
And this looks very promising! It's just... it doesn;t matter how much I push that button, the download doesn't start
e...where can we upload the .7z?
shuhang said:
we get the sbf but its unsigned...
Click to expand...
Click to collapse
Leak it, even without a signature.
Able to download it here in the UK, great news!
so...could we restore the system only via CWM recovery?
I could not follow through...
this is a packed (.7z) version of /system of new GB Rom for MM2?
What use does it have for us? Would it work if I upgraded /system?
I also got it,but it unsigned.
oTToToTenTanz said:
I could not follow through...
this is a packed (.7z) version of /system of new GB Rom for MM2?
What use does it have for us? Would it work if I upgraded /system?
Click to expand...
Click to collapse
currently maybe just useful for developers...
WongJames said:
so...could we restore the system only via CWM recovery?
Click to expand...
Click to collapse
possibly not.
leak the unsigned sbf please.
shuhang said:
we get the sbf but its unsigned...
Click to expand...
Click to collapse
Leak it, some might have an engineering sample and be able to flash it.

NS4G 2.3.5 Direct DL Link from Google

Here is the direct link from Google: http://android.clients.google.com/p...c0.signed-sojus-GRJ90-from-GRJ22.39fe4c59.zip
Hopefully that saves looking through the other huge thread for the link, and/or people rushing off to mirror this file unnecessarily.
How to use this file to update: http://forum.xda-developers.com/showpost.php?p=15985190&postcount=276
All the best, I accept no responsibility for any outcomes my suggestions may cause
Is this the new update were suppose to get today
Sent from my Nexus S 4G using XDA Premium App
Thanks. Out of curiosity, how do you locate this... is there a google parent page that shows all of these or something?
1stloc said:
Is this the new update were suppose to get today
Click to expand...
Click to collapse
Yes it it.
The111 said:
Thanks. Out of curiosity, how do you locate this... is there a google parent page that shows all of these or something?
Click to expand...
Click to collapse
Once you know the file name (posted in this thread: http://forum.xda-developers.com/showthread.php?t=1181833 ) it's easy to work out the direct Google link.
So is the radio.img gotta be ripped out still?
?
How would I update from this zip file?
Haha. thats what i wanna know, i havent updated before.
How to use this to update, see: http://forum.xda-developers.com/showpost.php?p=15985190&postcount=276
Thanks zulu ! i'll take a look.
Now where's 2.3.5 for those of us on the original model GRJ22
thommcg said:
Now where's 2.3.5 for those of us on the original model GRJ22
Click to expand...
Click to collapse
Yes, that includes me, despite me helping out here for people with a different phone.
I have no idea when the 9023 and 9020 users will be updated.
this is only for 4G? Thaknks
can i flash the zip with rooted stock rom and netarchy's kernal without hurting anything?
applefanboylol said:
can i flash the zip with rooted stock rom and netarchy's kernal without hurting anything?
Click to expand...
Click to collapse
@applefanboylol,
If you have RA, or Clockwork installed, it will not work because if you attempt to boot into recovery(because you replaced the boot.img file with a different recovery system other than stock) the bootloader will take you to the alternate recovery. You will have to remove RA, or Clockwork. To answer your question the update overwrites the existing kernel with a different one.
Atheistnofaith said:
@applefanboylol,
If you have RA, or Clockwork installed, it will not work because if you attempt to boot into recovery(because you replaced the boot.img file with a different recovery system other than stock) the bootloader will take you to the alternate recovery. You will have to remove RA, or Clockwork. To answer your question the update overwrites the existing kernel with a different one.
Click to expand...
Click to collapse
ok thanks for sharing i would have just flashed it if you didnt answer. So basically i need to unroot my phone?
applefanboylol said:
can i flash the zip with rooted stock rom and netarchy's kernal without hurting anything?
Click to expand...
Click to collapse
Do not flash Netarchy nor any other kernel until Android 2.3.5 kernel version is released. I'm sure Netarchy will release 2.3.5 kernel version once the source code is released for public.
Does this update remove root/CWM recovery? It's easy enough to get back, but I'm just double checking before I do anything stupid.
not sure why but the directions state to hold power and vol up after you boot into recovery before the exclamation mark and it just refuses to give me the option to select my update.zip......... blllaahhhhh
edit:: Ok so you have to hit Power first then hold it down when you hit vol up.. That worked perfect for me.
xyzulu said:
Here is the direct link from Google: http://android.clients.google.com/p...c0.signed-sojus-GRJ90-from-GRJ22.39fe4c59.zip
Hopefully that saves looking through the other huge thread for the link, and/or people rushing off to mirror this file unnecessarily.
How to use this file to update: http://forum.xda-developers.com/showpost.php?p=15985190&postcount=276
All the best, I accept no responsibility for any outcomes my suggestions may cause
Click to expand...
Click to collapse
Thanks Bro, worked like a charm. My 4G and WiFi signal are stronger. Thanks again

Full (not OTA) Acer_A500_7.006.01_COM_GEN2

No one seems to show GEN2 any love. Its all GEN1 and CUS7. For those that want GEN2 (I live in US), well here you are. A full image for Acer_A500_7.006.01_COM_GEN2. This is not edited in any way. (This means not rooted). This is probably not going to be useful to the average person. For a modified (but rooted) ROM of this, look here
This is not OTA and can be used without ClockWorkMod (CWM) or any modifications of any kind.
Unzip Acer_A500_7.006.01_COM_GEN2.zip and place update.zip on the root of your SD card.
I should also mention this is Honeycomb 3.2 for those that don't keep track of the build numbers (and who can blame you?), and this DOES have a locked bootloader. But, nevertheless, and valid source for flashing and other things!
Acer_A500_7.006.01_COM_GEN2.zip
http://www.megaupload.com/?d=ZTKEMFF6
Enjoy!
thank you so very much for this. Where did you get it? as soon as i get it downloaded Im going to add it to dropbox and post the link here if that is ok with you.
Here is a dropbox link to the file: http://dl.dropbox.com/u/26368270/Android/tablet/Acer_A500_7.006.01_COM_GEN2.zip
Where does anyone get anything? Google, where else?
Do whatever you want with the file. If you search the web log enough you'll find it, too.
Hi. I have a question....is it rooted? I would hate to update it and lose root. Thanks. Excuse the question, Im fairly new to the Acer scene (1 week).
Sent from my HTC Glacier using XDA App
This is not rooted, it is also bootloader locked. I do not recommend this for you. Try another rom that is 3.2, there are plenty now!
Ty, been waiting for a GEN2 to add to my collection.
Thanks for the heads up. Im running Honeyvillain 1.2 but Im curious about the GEN2, as Im in the US as well. I dont know what the differences are, but so far its working smooth, smoother than any other ROM out there.
Sent from my HTC Glacier using XDA App
GamezR2EZ said:
No one seems to show GEN2 any love. Its all GEN1 and CUS7. For those that want GEN2 (I live in US), well here you are. A full image for Acer_A500_7.006.01_COM_GEN2. This is not edited in any way. (This means not rooted). This is probably not going to be useful to the average person. For a modified (but rooted) ROM of this, look here
This is not OTA and can be used without ClockWorkMod (CWM) or any modifications of any kind.
Unzip Acer_A500_7.006.01_COM_GEN2.zip and place update.zip on the root of your SD card.
I should also mention this is Honeycomb 3.2 for those that don't keep track of the build numbers (and who can blame you?), and this DOES have a locked bootloader. But, nevertheless, and valid source for flashing and other things!
Acer_A500_7.006.01_COM_GEN2.zip
http://www.megaupload.com/?d=ZTKEMFF6
Enjoy!
Click to expand...
Click to collapse
You might want to add this to this thread so Vache can add it to the list?
http://forum.xda-developers.com/showthread.php?t=1113878
elcanela said:
Thanks for the heads up. Im running Honeyvillain 1.2 but Im curious about the GEN2, as Im in the US as well. I dont know what the differences are, but so far its working smooth, smoother than any other ROM out there.
Sent from my HTC Glacier using XDA App
Click to expand...
Click to collapse
Yea I wouldn't worry 2 much about GEN2. If you have a choice, get GEN2. Otherwise it doesnt matter. The differences are mostly system files related to keyboards and databases and such from what I have dissected.
Like spelling color as colour and other oddities.
That and different bloatware, not all the same as the US
kjy2010 said:
You might want to add this to this thread so Vache can add it to the list?
http://forum.xda-developers.com/showthread.php?t=1113878
Click to expand...
Click to collapse
He has been PM'd
But I am fairly certain he already had this. Or at least the COM1 version.
Ah, got it. Thanks again.
Sent from my HTC Glacier using XDA App
thanks alot been waiting on gen2 to start making a new rom
GamezR2EZ said:
Yea I wouldn't worry 2 much about GEN2. If you have a choice, get GEN2. Otherwise it doesnt matter. The differences are mostly system files related to keyboards and databases and such from what I have dissected.
Like spelling color as colour and other oddities.
That and different bloatware, not all the same as the US
He has been PM'd
But I am fairly certain he already had this. Or at least the COM1 version.
Click to expand...
Click to collapse
Thanks, it's nice to have one thread where one can find the proper stock ROM for their tab. He had no COM2 HC 3.2 ROMs on the list.
GamezR2EZ said:
Where does anyone get anything? Google, where else?
Do whatever you want with the file. If you search the web log enough you'll find it, too.
Click to expand...
Click to collapse
The reason I asked where you got it, is because I have been searching since friday for this. I have been searching google for every keyword I could think of.
bdubble said:
thank you so much. you posting this got my tab unbricked. it was saying boot verified failed at the acer logo, i stupidly tried to downgrade from 3.2. i used this and the stock recovery and it booted. i tried with every stock rom on the forum, but couldnt get the decrypter to work, finally your post saved me having to ship it to acer in texas.
Click to expand...
Click to collapse
Vache has a downgrade image to Acer_A501_1.309.02_COM_GEN1 that will work with the new locked bootloader. Root that image then install CWM THEN install a custom rom. That will prevent the boot verification issue!
GamezR2EZ said:
Vache has a downgrade image to Acer_A501_1.309.02_COM_GEN1 that will work with the new locked bootloader. Root that image then install CWM THEN install a custom rom. That will prevent the boot verification issue!
Click to expand...
Click to collapse
Thank you for this info. As soon as I get my replacement, I will do this if needed and install your 3.2 rom. I love having root, but want a 3.2 rom that is not from an a501 constantly asking me to install sim card.
hroberts89436 said:
Thank you for this info. As soon as I get my replacement, I will do this if needed and install your 3.2 rom. I love having root, but want a 3.2 rom that is not from an a501 constantly asking me to install sim card.
Click to expand...
Click to collapse
That problem can be solved by adding the line "ro.carrier=wifi-only" in the buildprop (you can do this with es file explorer or root explorer) and reboot.
sorry mis post wrong thread
GamezR2EZ said:
No one seems to show GEN2 any love. Its all GEN1 and CUS7. For those that want GEN2 (I live in US), well here you are. A full image for Acer_A500_7.006.01_COM_GEN2. This is not edited in any way. (This means not rooted). This is probably not going to be useful to the average person. For a modified (but rooted) ROM of this, look here
This is not OTA and can be used without ClockWorkMod (CWM) or any modifications of any kind.
Unzip Acer_A500_7.006.01_COM_GEN2.zip and place update.zip on the root of your SD card.
I should also mention this is Honeycomb 3.2 for those that don't keep track of the build numbers (and who can blame you?), and this DOES have a locked bootloader. But, nevertheless, and valid source for flashing and other things!
Acer_A500_7.006.01_COM_GEN2.zip
http://www.megaupload.com/?d=ZTKEMFF6
Enjoy!
Click to expand...
Click to collapse
I live in the us and while I have rooted my a500 I haven't installed a custom rom yet because the few stock roms are gen1. I want to stay as close to stock as possible and would love to have this 7.006.01_com_gen2 with just root and and bootloader fixed. I thought your "clean" rom might work for me but I'd prefer to have just the stock rom with few modifications. Any idea where I might find something like that?
golfgirl606 said:
I live in the us and while I have rooted my a500 I haven't installed a custom rom yet because the few stock roms are gen1. I want to stay as close to stock as possible and would love to have this 7.006.01_com_gen2 with just root and and bootloader fixed. I thought your "clean" rom might work for me but I'd prefer to have just the stock rom with few modifications. Any idea where I might find something like that?
Click to expand...
Click to collapse
Check my post at:
http://forum.xda-developers.com/showthread.php?p=18146210#post18146210
kekinash said:
Check my post at:
http://forum.xda-developers.com/showthread.php?p=18146210#post18146210
Click to expand...
Click to collapse
I am using this rom from what I can tell so far its Very Stock Rooted and no issues at all.
Thanks. I installed this over stock slightly modified 3.1 I did wipe /format partitions. Then restored my ti backup.complete secess

Categories

Resources