Related
Anyone who can dump a Dutch Ipaq 614c ROM?
It would be much appreciated
If you're still looking for one, maybe I can be of some help...
charlieMOGUL
Yes, I'm still looking for a Dutch ROM or a dump of a Dutch ROM.
i am also looking for a dutch rom. if i can help with something or need to do anything just let me know, i need this ROM very bad.
sincerley locoo
Maybe this can be usefull
It is a Dutch ROM
*I will post a working image soon.
For anyone who is interested in cooking a Dutch ROM, here are the OEM en SYS files, extracted from the ROM.
http://uploading.com/files/6a1634d9/OEM_%26amp%3B_SYS_Dutch_Ipaq_614c.rar/
Also for creating a Dutch xt9 cab file, these files are usefull. Creating the cab file myself wasn't successfull. This is a package ready to be cooked for Dutch xt9 files.
http://rapidshare.com/files/278550136/Dutch_xt9_for_IPAQ_614C.zip
Darqw said:
Maybe this can be usefull
It is a Dutch ROM
http://rapidshare.com/files/278140280/Dutch_IPAQ_614C_ROM.rar.html
Click to expand...
Click to collapse
First of all i want to thank you very much for this rom, however
i downloaded this, and flashed it on my device, flashing went perfectly but as soon as the windows mobile screen pops up along with that ''trendy'' beep sound, it gets stuck on it.
i left it a couple a minutes, i stays on the screen showing the ''please wait''
spinning logo of WM 6.
i also tried to reflash it, also re downloaded it in case something went wrong downloading.
anyone else facing this problem to?
and 1 other question,
i made a dump of a hp 614 i have, wich is Dutch, now i got the following files :
- diskimage_Ver.nbo
- part2.nb0.payload
- part2.nb0.payload.part1
- part02.raw
when i whas searching forums i found out that i have to change the
diskimage_Ver.nb0 to FLASH.DIO
i tried this and the device got stuck at the ''clean boot'' part.
obviousley i don't know alot and i'm sorry to ask anyone's help.
but what do i have to do with those other files? how do i make those files to a complete working ROM?
any help appreciated,
thanks to all people that helped me comming this far
I see the problem... I didn't have time to test it thoroughly.
Here is the link for a new (and hopefully a good working) ROM image.
http://rapidshare.com/files/278647058/original_dutch_1.00.rar
The problem is that I myself am still trying to learn to cook, so don't expect any miracles... That's why the first one didn't function properly. But normally this ROM schould function, as it is an copy of a Dutch Ipaq 614c.
If anyone is interested in cooking an up-to-date Dutch ROM, all the necessary tools and dumps are (normally) available. I already posted the OEM and SYS folders separately or they can be extracted from this ROM image.
At the moment I am not able to create a good working up-to-date Dutch ROM image, hopefully somebody is able to create one with the help of this ROM image.
Darqw said:
I see the problem... I didn't have time to test it thoroughly.
Here is the link for a new (and hopefully a good working) ROM image.
http://rapidshare.com/files/278647058/original_dutch_1.00.rar
The problem is that I myself am still trying to learn to cook, so don't expect any miracles... That's why the first one didn't function properly. But normally this ROM schould function, as it is an copy of a Dutch Ipaq 614c.
If anyone is interested in cooking an up-to-date Dutch ROM, all the necessary tools and dumps are (normally) available. I already posted the OEM and SYS folders separately or they can be extracted from this ROM image.
At the moment I am not able to create a good working up-to-date Dutch ROM image, hopefully somebody is able to create one with the help of this ROM image.
Click to expand...
Click to collapse
thanks for the updated ROM link, i'll post a review of the ROM ASAP.
this will be tomorrow,
ontzettend bedankt!
could you please explain me what to do with the 4 files, how they needed to be set-up for a working ROM, im also trying to get the hang of cooking a ROM.
ill be glad to hear from you once again.
yours sincerley,
alex
ftp://ftp.acer-euro.com/smartphone/s200/os_images/
Available Languages : EN, DE, ES, FR, IT, PT, RU
/you may have a problem during update - "Key failure..." or something like this (for EN version). Then use RU image, extract it (use 7zip) and put EXTROM.bin and FLASH.bin in the same folder (replace)... after- enjoy/
tnx. direct link from acer website link
so if anyone who has flashed the new rom notice any changes pls post them.
if there arent any major changes i wont be flashing it. just got my F1 a week ago and hv customized it quite abit.
thanks appreciate
Trying change language from RU to ENG. Always got message with "Key falure...".
ZILLKA said:
Trying change language from RU to ENG. Always got message with "Key falure...".
Click to expand...
Click to collapse
Yes... Use other installation... now... download RU image. Use 7zip to extract the installation (yes, you can). Download ENG image. Extract it from same way. Now, copy EXTROM.bin and FLASH.bin from ENG extraction files to RU files (replace). Then run ACER_EUU.exe . This is it ... and one more thing - if it show error for wrong version before "Key failure", edit the version.txt and put high version than yours.
Sorry for my bad english.
Good luck
/if you can not success, i will upload for you ready installation/
Thank you, thank you, thank you.
Very useful.
butamuh4o said:
Yes... Use other installation... now... download RU image. Use 7zip to extract the installation (yes, you can). Download ENG image. Extract it from same way. Now, copy EXTROM.bin and FLASH.bin from ENG extraction files to RU files (replace). Then run ACER_EUU.exe . This is it ... and one more thing - if it show error for wrong version before "Key failure", edit the version.txt and put high version than yours.
Sorry for my bad english.
Good luck
/if you can not success, i will upload for you ready installation/
Click to expand...
Click to collapse
Been trying to reinstall acer version but after following above i keep getting SKU language fail, device=1.002d.00_EN_IN
Image version=2.003.00_RU
Any ideas?
Use Hacked ACER_EUU.exe from http://forum.xda-developers.com/showpost.php?p=5072827&postcount=341
gillebob said:
Been trying to reinstall acer version but after following above i keep getting SKU language fail, device=1.002d.00_EN_IN
Image version=2.003.00_RU
Any ideas?
Click to expand...
Click to collapse
...Or... in version.txt replace with 1.003d.00_EN_IN good luck
freco said:
Use Hacked ACER_EUU.exe from http://forum.xda-developers.com/showpost.php?p=5072827&postcount=341
Click to expand...
Click to collapse
thanks for that, it worked perfectly, but why wouldn't it work before? i have an EN version.
butamuh4o said:
...Or... in version.txt replace with 1.003d.00_EN_IN good luck
Click to expand...
Click to collapse
yeah i tried that, no luck... thanks anyway.
Change the keyboard From QWERTY to AZERTY
gillebob said:
yeah i tried that, no luck... thanks anyway.
Click to expand...
Click to collapse
Please, somebody can tell me how to change the language of the input keyboard please ?? (The layout) it's in QWERTY & i want to put it in AZERTY please help me!!
(I have a English ROM & I don't want a French ROM)
Thank's
gillebob said:
thanks for that, it worked perfectly, but why wouldn't it work before? i have an EN version.
Click to expand...
Click to collapse
Looks like there are different EN versions.
Acer S200 NewTouch
Hi,
I bought Acer S200 from francem the issue is OS language is French, i liked the phone a lot so insted of returning it want to check possibility if i can change the language to EN.
Please let me know if it is possible and how to do if possilbe.
Please reply in details as i am not a teche person..
Thanks and Regards
Vishal Balapure
First you download ROM image -> ftp://ftp.acer-euro.com/smartphone/s200/os_images/
Than run .exe, will appear a window, which will guide you through ROM update.
Hi,
I tried the option you have stated in your post , i have downloaded the OS image in EN but when i try to update my phone i get the message stating the OS language is not matching then the wizard shows finish btton not the next button , please suggest what to do.
My Phone OS is french i want to change it to English OS.
Use hacked EUU, you can find it on forum
Piter1225 said:
Use hacked EUU, you can find it on forum
Click to expand...
Click to collapse
i Tried this as well but getting registration key error , currently the OS on my phone is S200_1.002C.00_FR.
can i downgrade my acer s200 from 2.003.01_FR_SFR to 2.003.00_FR ?
Anything new in the ROM on teh Acer site?
Please let me know if anyone has installed the new ROM on the official Acer site. Is there anything new about it? Does it have any updates?
(fingers crossed) Is it the new version - 6.5.3?
Hi all..
Thx Raffytto for the Roms!!! I have see a beautifull change in the my Acer... I have one question.
If i want return in the official roms from the rom kitchen what i do?
If i want to return the Acer in assistance i don't send it with other roms...
Can you exlain me what i to do for return in official roms...
Thx a Lot to all for your work!!!!
Damiano
UP
anyone who gives me an answer?
I can go back to a cooked rom to the original
unpack the original rom but don't update, go to the folder where the original files are and overwrite the original ACER_EUU.exe with the hacked one. run ACER_EUU.exe and follow instructions
How I open the original rom?
I need to use what program?
Thanks!
korl85 said:
How I open the original rom?
I need to use what program?
Thanks!
Click to expand...
Click to collapse
use winrar, just right-click on the ~.exe file and extract to...
A.
If the language of system information on your Neotouch is corresponding to the language of Official-ROM, then you can update usually only run EUU_Acer_S200_*.exe without any special method.
The language of system information is revokable in the following registries.
HKLM-ControlPanel-ACER-SystemInfo-Software
-Language
if you download
EUU_Acer_S200_3.003c.00_EN_01_03.03.08_3.003c.00_20100203.zip
then set Language to "EN_01"
you can download official-rom from here.
ftp.acer-euro.com/smartphone/s200/os_images
I'm sorry ,I can't speak english well.
hanasade said:
If the language of system information on your Neotouch is corresponding to the language of Official-ROM, then you can update usually only run EUU_Acer_S200_*.exe without any special method.
The language of system information is revokable in the following registries.
HKLM-ControlPanel-ACER-SystemInfo-Software
-Language
if you download
EUU_Acer_S200_3.003c.00_EN_01_03.03.08_3.003c.00_20100203.zip
then set Language to "EN_01"
you can download official-rom from here.
ftp.acer-euro.com/smartphone/s200/os_images
I'm sorry ,I can't speak english well.
Click to expand...
Click to collapse
10x man!!! very useful!
hanasade said:
If the language of system information on your Neotouch is corresponding to the language of Official-ROM, then you can update usually only run EUU_Acer_S200_*.exe without any special method.
The language of system information is revokable in the following registries.
HKLM-ControlPanel-ACER-SystemInfo-Software
-Language
if you download
EUU_Acer_S200_3.003c.00_EN_01_03.03.08_3.003c.00_20100203.zip
then set Language to "EN_01"
you can download official-rom from here.
ftp.acer-euro.com/smartphone/s200/os_images
I'm sorry ,I can't speak english well.
Click to expand...
Click to collapse
I found it, but i can't be changed
Hello, I bought on the german e-bay a mobile device called Acer neotouch s200, which is in german language without other languages like english, etc... I have read that if I want to get english language, I need to (re)flash it. Currently, the device has S200_3.003c.00_DE ROM. I do not know exactly if it is better to get the default ROM or the newest. To flash it, I downloaded Acer S200 beta 3 flashing tool, ran Acer_EUU.exe, but it stopped before updating the device (this was made on my desktop computer with Windows XP). I also tried it on my laptop with Windows 7, but the Acer_EUU.exe "stopped working". Can you please give me any advice how to solve my problem? I read it is better to get the default ROM, because it reduce the battery status, but it has got bugs.
Thank you
heeelp please
bry4nnn said:
heeelp please
Click to expand...
Click to collapse
heeelp please
Please do some search on this forum. This is one of the thread I found.
Quote:
benjaminchan
10th April 2010, 06:47 AM
Dear Stress Analyst,
Thanks for your helpful advice. The problem has been solved. For the benefit of those who run into the same problem, here is what I did (I am summarizing this from memory, so I may miss a few things):
- I downloaded a file called "Arto's Sense rom 2.1 (3.003c, 23554, 2012).rar". The size is 162,841,490 bytes.
- I unzipped the contents of the .rar file into a folder.
- I put the S200 in bootloader mode by pressing and holding the camera and power buttons, while pressing the reset button with the stylus. The LED started flashing red. I connected the S200 to my Windows XP SP3 desktop, and it caused the Acer HS-USB driver to be installed.
- In the aforementioned folder, I ran “Acer_Euu.exe”, and was led through a series of windows. Just click, click, click ...
- When flashed, the Arto ROM was nice and interesting on my pda, but a bit too funky for a middle-age man like me. So I decided to install the Acer update instead.
- I unzipped file “OS_Acer_3.003c.01.EN.02_WM65_A.zip” and ran file EUU_Acer_S200_3.003c.01_EN_02_03.03.08_3.003c.00_2 0100202.exe
- After flashing the updated Acer ROM, I checked the version number, which was CE OS 5.2.21883 (Build 21883.5.0.783). The earlier version was Build 21857.5.0.66. The new version seems to run faster than the old version. Here is what I think were the problems with the older version 21857.5.0.66:
- The old firmware does not do a Clean Boot very well.
- The old firmwave has problems connecting to the Acer update.
Arto's ROM overcame these two problems, which meant that I can use it as a temporary bridge to the updated Acer ROM.
Unquote..
You can try the newest Arto's rom on the 2nd thread below yours.
Unhappy
How can I change ROM Acer neoTouch S200
I have OS_ACER_3.003b.00.EN_WM65_S200
I want to change to
EUU_Acer_S200_3.003c.00_EN_01_03.03.08_3.003c.00_2 0100203
problem
Code
ERROR CODE = SKU_incompatible
Search.... All answers in this forum............
.....Tried to update from 3.003b to EUU_Acer_S200_3.003c.00_EN_01_03.03.08_3.003c.00_20100203
and the utility tells me SKU_incompatible .
I have in registry EN language by default.
Does anyone knows what is wrong with it?
Yes, for this "3.003c.00_EN_01" rom you should have language set ton EN_01 in your registry. ;-]
.....................
Just use your favorite registry editor and go to HKLM\ControlPanel\ACER\SystemInfo\Software
You'll find two keys: ExtROMVer and Language
For each key, Change your language occurence to "EN_01".
guys, do you really think that I am an idiot? I know all these steps, but I CANNOT connect the device to my laptops & PC
btw, can u copy here a DL link for "Arto's Sense rom 2.1 (3.003c, 23554, 2012).rar" ? Cannot find it
cmooon fellaz
Can you get into bootloader mode?
Version 2.1 is just the latest version during the creation of the thread. You can download other versions here.
http://www.almostunreal.org/arto/
Try follow up on this thread.
http://forum.xda-developers.com/showthread.php?t=642654&page=258
Get machine into bootloader mode, Red led flashing. Key sequence:
Camera + Volume down + Reset
Previous key sequence won't work for me. (Camera+Power+Reset)
Finally I flashed my device using the Arto's Sense rom, but now the device is really slow and some options are restricted. I also cannot change the display settings, so it is sometimes bright and sometimes dark. G-Sensor does not work, phone lags a lil bit. Is there any way how to get the DEFAULT stock firmware (with english language of course)? I copied the downloaded firmware from ftp: ftp.acer-euro (the oldest) to directory called Acer beta flashing tool where is also included Acer_EUU.exe and other stuff for flashing... and flashed it. After flash the welcome screen says I have the old firmware, but there is the same theme like before and the OS version did not change. I thought the newest, cooked firmware is very good & fast and works without any problems but this really sux. imho the default will be definitely the best :>
Thanks for any advice
Download this official rom here.
http://www.sendspace.com/file/6t1kpo
Check the Arto rom version and change your register to EN_02 before flashing the new rom.
...................
Just use your favorite registry editor and go to HKLM\ControlPanel\ACER\SystemInfo\Software
You'll find two keys: ExtROMVer and Language
For each key, Change your language occurence to "EN_02".
..................
Actually I have tested every step without problem. Flash to Arto's rom and flashing back to official rom.
bry4nnn said:
Finally I flashed my device using the Arto's Sense rom, but now the device is really slow and some options are restricted. I also cannot change the display settings, so it is sometimes bright and sometimes dark. G-Sensor does not work, phone lags a lil bit. Is there any way how to get the DEFAULT stock firmware (with english language of course)? I copied the downloaded firmware from ftp: ftp.acer-euro (the oldest) to directory called Acer beta flashing tool where is also included Acer_EUU.exe and other stuff for flashing... and flashed it. After flash the welcome screen says I have the old firmware, but there is the same theme like before and the OS version did not change. I thought the newest, cooked firmware is very good & fast and works without any problems but this really sux. imho the default will be definitely the best :>
bry4nnn,
First of all, you have followed bad/wrong advice from an idiot who quoted an old post about arto's sense "2.1" when in reality, sense roms and s200 rom developement in general has far surpassed 2.1 and acer stock firmware!!!!
according to your first post you already had the latest "stock" firmware w/3.003c drivers so all you needed to do was flash one of the many "clean roms" labled "WWE".
Second, the S200 will always have bugs because of WM6.5 that's why cooked roms are made to overcome most of the limitations of our device!! Inchu though
wrong about almost everything was right about one thing,"READ BEFORE YOU START A NEW THREAD" because right beneath your post is an entire universe of
info,roms,flashing info and all things s200!!! including one labled "Arto's sense 4.0" if you bothered to look you would find a change log with a chronological listing of Arto's sense from 1.0,1.1,etc...
My advice for you would be to delete all of your downloaded EUU's and beta tools and start over by simply downloading one of brainmaster's roms either
"WWE Clean" or "WWE Manila Clean 1.1" or any of the many he has cooked
for our device.
Click to expand...
Click to collapse
lnchu said:
Download this official rom here.
http://www.sendspace.com/file/6t1kpo
Check the Arto rom version and change your register to EN_02 before flashing the new rom.
...................
Just use your favorite registry editor and go to HKLM\ControlPanel\ACER\SystemInfo\Software
You'll find two keys: ExtROMVer and Language
For each key, Change your language occurence to "EN_02".
..................
Actually I have tested every step without problem. Flash to Arto's rom and flashing back to official rom.
Click to expand...
Click to collapse
ehm, your file is called "Name: OS_Acer_3.003c.01.EN.02_WM65_A.zip " which refers to a newer firmware, right? Anyway, i have to repeat myself: "I need default stock firmware, the oldest with EN" (and in my opinion it is probably called 2.003, yy?)
acer900 said:
bry4nnn said:
....
bry4nnn,
First of all, you have followed bad/wrong advice from an idiot who quoted an old post about arto's sense "2.1" when in reality, sense roms and s200 rom developement in general has far surpassed 2.1 and acer stock firmware!!!!
according to your first post you already had the latest "stock" firmware w/3.003c drivers so all you needed to do was flash one of the many "clean roms" labled "WWE".
Second, the S200 will always have bugs because of WM6.5 that's why cooked roms are made to overcome most of the limitations of our device!! Inchu though
wrong about almost everything was right about one thing,"READ BEFORE YOU START A NEW THREAD" because right beneath your post is an entire universe of
info,roms,flashing info and all things s200!!! including one labled "Arto's sense 4.0" if you bothered to look you would find a change log with a chronological listing of Arto's sense from 1.0,1.1,etc...
My advice for you would be to delete all of your downloaded EUU's and beta tools and start over by simply downloading one of brainmaster's roms either
"WWE Clean" or "WWE Manila Clean 1.1" or any of the many he has cooked
for our device.
Click to expand...
Click to collapse
For what exactly do I need this: WWE Clean and WWE MC 1.1 ? How I said, I rly do not need any CUSTOM firmware. just want to get the default firmware, not these bugged versions.
Click to expand...
Click to collapse
Then you are clearly in the wrong place because this is the "Neotouch S200 Rom Development" section not Acer.com (http://www.acer.com/worldwide/support/download.htm which is where all things "official" or"stock" can be found!!!
And you are so wrong about the custom roms here they are light years ahead of the bug filled original acer rom!!!
But since you have only tried an older version custom rom still in development (as the change log indicates) and decided that all custom roms are buggy w/out having tried them then maybe you deserve the original acer firmware!
custom roms are made to correct problems in the stock firmware.
*** WILL THE MODERATOR PLEASE CLOSE THIS USELESS ERROR FILLED THREAD***
acer900 said:
Then you are clearly in the wrong place because this is the "Neotouch S200 Rom Development" section not Acer.com (http://www.acer.com/worldwide/support/download.htm which is where all things "official" or"stock" can be found!!!
And you are so wrong about the custom roms here they are light years ahead of the bug filled original acer rom!!!
But since you have only tried an older version custom rom still in development (as the change log indicates) and decided that all custom roms are buggy w/out having tried them then maybe you deserve the original acer firmware!
custom roms are made to correct problems in the stock firmware.
*** WILL THE MODERATOR PLEASE CLOSE THIS USELESS ERROR FILLED THREAD***
Click to expand...
Click to collapse
u r so amusing, are not u? "custom roms are made to correct problems in the stock firmware" - yeah yeah and the bugs there are like side effects at painkillers, yeah?
And why the **** are u spamming here in this thread (now)? I wanted to get stock FW, not an advice about slow_buggy_custom_rom, cyao
I belong here, been here almost from the start of this forum and know a hell of a
lot more than you!!!! but dumb assholes like you who come to a windows mobile hacking forum to ask for advice about stock firmware don't!!
Not to mention, insulting the work of the very people you ask to help you're
sorry - wannabe - know-it-all ass will surely never get answers!!!!!
Any ideas how to get the default stock fw like it is here - http://tinyurl.com/5s5ocmh ?
I had it before with unsuitable languange (fw version was 3.003c). Now I want the same, just with english. If I use the fimwares from acer webpage then I have the same theme (& and the display is still dark, cannot change some options, etc..)
PROBLEM SOLVED
Arto made for me this stock firmware (3.003c.01.EN.02)
http://www.4shared.com/file/jJQSar1f/Stock_rom_english_S200.html
The home screen looks like this:
http://tinyurl.com/6fyfkhv
Thank you
Hi,
Can someone point me to procedure or guide how to take stock rom fromthe unit and just addnadditional interface language.
Thanx,
DiNo
Well, you are still looking?
Ok, I popped open a rom, and what I saw, was in the /system/usr/xt9/databases/ldb, were ldb files in multiple languages. (LanguageDataBase)
My guess, is that this is part of the multi-system language based on region.
So my guess, is that if you find a rom (any rom), that contains your regional language, you should be able to copy that Ldb file, into the custom rom zip, and let it re-compress the zip file, then try flashing it. This may give you the language support you are looking for.
It's a guess for me, but, it may work. Maybe something else is needed.
I have a feeling, finding a custom rom in Croatian, will be extremely difficult. So, sometimes, you have to do it yourself. Find your regional HC 3.2, and unzip it, and look inside.
Hi,
Thanks for reply.
I found out that motorola Xoom latest stock rom has Croatian language built in.
Would it work to copy ldb file from it or there will be issues since it is for another device ?
Thanks for tutoring but this are my first steps
Regards,
DiNo
dnovak said:
Hi,
Thanks for reply.
I found out that motorola Xoom latest stock rom has Croatian language built in.
Would it work to copy ldb file from it or there will be issues since it is for another device ?
Thanks for tutoring but this are my first steps
Regards,
DiNo
Click to expand...
Click to collapse
Usually, we don't copy files from a rom other than acer. Not without doing a recovery backup first.
It's possible you will be ok. I think at the most, it will force close, or reboot. Or, it may work. I would be interested to know.
Also, you may want to take a look around and see if there are other files that may be linked to language. I was just lucky finding what I found.
I guess it will all depend on if the zoom ldb uses the exact same format as the Acer roms. 50/50 chance.
Seems I have found additional info on changing to a different language. Hope you want to learn a little programming
http://www.freeyourandroid.com/guide/how_to_translate_any_rom_to_any_language