Database Users

How to use 565to5x5.exe

http://www.mobile01.com/topicdetail.php?f=224&t=368318&p=1
---------- 2007.08.08 ------------
575、585用的wm6 patch來囉
請下載565的wm6 070807版後
將565to5x5.exe與565wm6.bin放在同一目錄下執行
可得到5x5wm6.bin
然後再用mtty刷rom
http://ifg.myweb.hinet.net/565to5x5.exe
目前還沒有經過實機測試, 請刷機過的朋友們回報一下使用情形

and for non-chinese???

..looks interresting, but would be better to translate in english...

i dont understand

Creative7419 said:
http://www.mobile01.com/topicdetail.php?f=224&t=368318&p=1
---------- 2007.08.08 ------------
575、585用的wm6 patch來囉
請下載565的wm6 070807版後
將565to5x5.exe與565wm6.bin放在同一目錄下執行
可得到5x5wm6.bin
然後再用mtty刷rom
http://ifg.myweb.hinet.net/565to5x5.exe
目前還沒有經過實機測試, 請刷機過的朋友們回報一下使用情形
Click to expand...
Click to collapse
ok you use 565to5x5.exe to patch 5x5.bin i tryed it but the rom is totaly
Chinese im only looking for eng rom

..may be there is possible to change the language to EN in settings, or to install the english language pack. How did you manage the patch working? I tried it, but couldnt understand the function of the patch...

Netopjer said:
..may be there is possible to change the language to EN in settings, or to install the english language pack. How did you manage the patch working? I tried it, but couldnt understand the function of the patch...
Click to expand...
Click to collapse
ok you put 565.bin in the same folder as the 565to5x5.exe open the 565to5x5.exe and press enter it will make a new 5x5.bin but when i flash it to my c500 it was Chinese but if you go to setting you can change to eng.
but you get less memory because of the Chinese font

rickwyatt said:
ok you put 565.bin in the same folder as the 565to5x5.exe open the 565to5x5.exe and press enter it will make a new 5x5.bin but when i flash it to my c500 it was Chinese but if you go to setting you can change to eng.
but you get less memory because of the Chinese font
Click to expand...
Click to collapse
I tried it on my I-mate sp3, its very slow and even was not able to change the language
Waiting for new rom, hope Andot comes for the rescue

Roms Upgrade

Hi all..
Thx Raffytto for the Roms!!! I have see a beautifull change in the my Acer... I have one question.
If i want return in the official roms from the rom kitchen what i do?
If i want to return the Acer in assistance i don't send it with other roms...
Can you exlain me what i to do for return in official roms...
Thx a Lot to all for your work!!!!
Damiano

UP
anyone who gives me an answer?
I can go back to a cooked rom to the original

unpack the original rom but don't update, go to the folder where the original files are and overwrite the original ACER_EUU.exe with the hacked one. run ACER_EUU.exe and follow instructions

How I open the original rom?
I need to use what program?
Thanks!

korl85 said:
How I open the original rom?
I need to use what program?
Thanks!
Click to expand...
Click to collapse
use winrar, just right-click on the ~.exe file and extract to...
A.

If the language of system information on your Neotouch is corresponding to the language of Official-ROM, then you can update usually only run EUU_Acer_S200_*.exe without any special method.
The language of system information is revokable in the following registries.
HKLM-ControlPanel-ACER-SystemInfo-Software
-Language
if you download
EUU_Acer_S200_3.003c.00_EN_01_03.03.08_3.003c.00_20100203.zip
then set Language to "EN_01"
you can download official-rom from here.
ftp.acer-euro.com/smartphone/s200/os_images
I'm sorry ,I can't speak english well.

hanasade said:
If the language of system information on your Neotouch is corresponding to the language of Official-ROM, then you can update usually only run EUU_Acer_S200_*.exe without any special method.
The language of system information is revokable in the following registries.
HKLM-ControlPanel-ACER-SystemInfo-Software
-Language
if you download
EUU_Acer_S200_3.003c.00_EN_01_03.03.08_3.003c.00_20100203.zip
then set Language to "EN_01"
you can download official-rom from here.
ftp.acer-euro.com/smartphone/s200/os_images
I'm sorry ,I can't speak english well.
Click to expand...
Click to collapse
10x man!!! very useful!

hanasade said:
If the language of system information on your Neotouch is corresponding to the language of Official-ROM, then you can update usually only run EUU_Acer_S200_*.exe without any special method.
The language of system information is revokable in the following registries.
HKLM-ControlPanel-ACER-SystemInfo-Software
-Language
if you download
EUU_Acer_S200_3.003c.00_EN_01_03.03.08_3.003c.00_20100203.zip
then set Language to "EN_01"
you can download official-rom from here.
ftp.acer-euro.com/smartphone/s200/os_images
I'm sorry ,I can't speak english well.
Click to expand...
Click to collapse
I found it, but i can't be changed

[CAB] Chinese support(CHS font only now) for Artermis ROM [UPDATED 02-May-2010]

Hi all,
This post is about getting the orginal WWE Asia HTC HD2's font into Artermis ROM.
1) Install the attached cab
2) Soft reset
Note 1: I only tested in fresh ROM environment, which is V10,V11
Note 2: These files are taken from RUU_Leo_hTC_Asia_WWE_1.66.707.1_Radio_Signed_15.30.50.07U_2.06.51.07_Ship.exe
One step closer to stock ROM "Philosophy"

ksk622 said:
Hi all,
This post is about getting the orginal WWE Asia HTC HD2's font into Artermis ROM.
I have tried various cabs before like ricky, RobRedbeard- LIA, sunglobe etc... and i have no idea what are the cabs actually doing. some of them even replaced the original wince.nls, create some junk reg keys, make chinese font in some app overlapping...
Here is the safer technique to get chinese font support without messing around with the system files and registry.
1) Download the attached zip file and extract to your storage card
2) Copy UCSH00B-gray.ttf to \windows
3) Import this registry file, SystemLink.reg
4) Soft reset
Note 1: I only tested in fresh ROM environment, which is V10
Note 2: These files are taken from RUU_Leo_hTC_Asia_WWE_1.66.707.1_Radio_Signed_15.30.50.07U_2.06.51.07_Ship.exe
One step closer to stock ROM "Philosophy"
Click to expand...
Click to collapse
great work on the chinese font!
is there any way of getting the ezInput keyboard from 1.66 asia ROM to work on other custom ROMs as well? thanks

alexnvidia said:
great work on the chinese font!
is there any way of getting the ezInput keyboard from 1.66 asia ROM to work on other custom ROMs as well? thanks
Click to expand...
Click to collapse
I am looking into this as well. will try my luck with the new version of "touch input".

ksk622 said:
I am looking into this as well. will try my luck with the new version of "touch input".
Click to expand...
Click to collapse
looking forward to your findings mate. cheers

temporary solution
I just tested with artermis v10 with the following
http://forum.xda-developers.com/showthread.php?p=6295918#post6295918
steps
1) download the attachment then extract all the files to a temp folder on your desktop
2) go files folder, copy & paste EzInputSettings.exe.0804.mui then rename the new file to EzInputSettings.exe.0409.mui
3) copy all the dll files from those folder name end with .ddl to parent folder (../files). you can skip HTCSipSrvc.dll
4) now go to your device, change SIP to other. change home to titanium
5) go to /windows folder and rename those dll file with same name you modified on your desktop temp folder to xxxx.dll.old( total is 11 files)
6) copy the temp folder on your desktop to your HD2
7) use total commander to move all the files inside files folder to /windows, replace all the dll & files (must make sure no overwrite error)
8) import app.reg
9) soft reset
Finally stock rom chinese support in WWE rom
Now just waiting for a kind soul to help to convert this into cab
UPDATE: Only pinyin and stroke is working...
ABOVE SOLUTION IS UNSUPPORTED NOW

I was reading somewhere that wince.nls needs to be updated to support chinese input???

Leechoonhwee said:
I was reading somewhere that wince.nls needs to be updated to support chinese input???
Click to expand...
Click to collapse
Artermis ROM is using the global version of wince.nls, thats why make this possible. Eg: we can see the 5 chinese legions in setting....

+1
Great work =D
Is it possible to make something similar using the 1.72 HKCSL_WWE stock ROM for traditional Chinese character display and input?
Thanks!

i am also very interest in this ,anyone can help to have a CAB?

yes please
+1
this would be a big help to a lot of users!
including me

global wince.nls
ksk622 said:
Artermis ROM is using the global version of wince.nls, thats why make this possible. Eg: we can see the 5 chinese legions in setting....
Click to expand...
Click to collapse
can you please upload a copy of the global wince.nls for those of us who arent on the artemis rom?
thanks
HPD

hyperpsychodreamer said:
can you please upload a copy of the global wince.nls for those of us who arent on the artemis rom?
thanks
HPD
Click to expand...
Click to collapse
Here it is...

ksk622 said:
Here it is...
Click to expand...
Click to collapse
i replaced the wince.nls, but nothing happened. i still dont get the 5 chinese regions in regional settings. also, can you check if your first post method works for google maps 4.1? in google maps, under settings, speech language, there is an option for mandarin. all i get are square boxes.. it should write chinese language, in mandarin of course. any fix for this?

alexnvidia said:
i replaced the wince.nls, but nothing happened. i still dont get the 5 chinese regions in regional settings. also, can you check if your first post method works for google maps 4.1? in google maps, under settings, speech language, there is an option for mandarin. all i get are square boxes.. it should write chinese language, in mandarin of course. any fix for this?
Click to expand...
Click to collapse
Maybe try the following:
- rename the existing wince.nls to wince.nls.old then copy the new one.
- inside your registry... remove this key [HKEY_LOCAL_MACHINE\Software\Microsoft\FontLink\SystemLink] then import the reg file from 1st post, if everything ok, only 5 entries will be recreated as following
"HelveticaNeue LT 35 Thin"="\\windows\\UCSH00B-gray.ttf,AR CrystalHeiU20 Bold(gray);\\windows\\tahoma.ttf,Tahoma"
"Helvetica Neue OTS"="\\windows\\UCSH00B-gray.ttf,AR CrystalHeiU20 Bold(gray);\\windows\\tahoma.ttf,Tahoma"
"Courier New"="\\windows\\UCSH00B-gray.ttf,AR CrystalHeiU20 Bold(gray)"
"Tahoma"="\\windows\\UCSH00B-gray.ttf,AR CrystalHeiU20 Bold(gray)"
"AR CrystalHeiU20 Bold(gray)"="\\windows\\tahoma.ttf,Tahoma"
remember to soft reset ... then enjoy the new font

alexnvidia said:
i replaced the wince.nls, but nothing happened. i still dont get the 5 chinese regions in regional settings. also, can you check if your first post method works for google maps 4.1? in google maps, under settings, speech language, there is an option for mandarin. all i get are square boxes.. it should write chinese language, in mandarin of course. any fix for this?
Click to expand...
Click to collapse
replacing the wince.nls directly doesn't work. You need to use it with reloadnls.exe which will have to be in the startup folder. do a search for it and you will find your answers. I used to write a thread for this as well, so you can try to search for it.

GiantMuffinMan said:
Great work =D
Is it possible to make something similar using the 1.72 HKCSL_WWE stock ROM for traditional Chinese character display and input?
Thanks!
Click to expand...
Click to collapse
that would be easy, if you guys really want it, I mean the traditional Chinese display and supports,
I may make 2 cabs tonight
cab 1: CHT display (mingliu.ttc, pretty fonts) and input (from Samsung HK keyboard),
cab 2: same as the above but added wince.nls with Chinese regions.
please pm to me to show your request in order to let me work on it ( I am currently using the second method )

wow~~thanks!!
it really helps~~
great work great work!!!

dioxda2 said:
that would be easy, if you guys really want it, I mean the traditional Chinese display and supports,
I may make 2 cabs tonight
cab 1: CHT display (mingliu.ttc, pretty fonts) and input (from Samsung HK keyboard),
cab 2: same as the above but added wince.nls with Chinese regions.
please pm to me to show your request in order to let me work on it ( I am currently using the second method )
Click to expand...
Click to collapse
THat would be greeaaat....

Hi Dioxda2,
i ever try your 2 roms.
those are only to display chinese right? not enter chinese right?
thanks in advance for clarifying
jack

Hi
I need hand writing for Chinese input，Can you dump your chinese version ROM and share with us?
Thank you

R3 Cab Files. (uk)

X2 UK R3AA035
http://rapidshare.com/files/388127600/r3.rar.html
http://hotfile.com/dl/43253929/3e33bd3/r3.rar.html
http://depositfiles.com/en/files/lh54nvzt4
http://www.megaupload.com/?d=35LZ05OO

Dear Sir. I am new. Please help to explain that if I down all cab file and install manually all. Means I already up the R1 rom to R3 rom or do I need to do futher uprom process ( If yes, how can I do it )
Many thanks in advance

i guess it depends what you want to do. If you just want to upgrade your phone, then use the update-software provided by SonyEricsson. If you want to change language from one language to an other, then you need to follow the guides in this post: http://forum.xda-developers.com/showthread.php?t=665564
I think that the original poster of these cabs is mixing numbers. We have now MR2 available, not MR3!

X2 uk r3aa035

rsx19 said:
X2 uk r3aa035
Click to expand...
Click to collapse
You are so right! It's just that at some point someone thinks that this could be from an possible upcoming MR3-release ;-)

when generic en comes out can some please put then new thred for cabs of generic en...thanx.

i guess you found that thread already..?

hertell said:
i guess you found that thread already..?
Click to expand...
Click to collapse
with cabs l have not...l need cabs not rar files..l can not extract..tried but no success

kronos1 said:
with cabs l have not...l need cabs not rar files..l can not extract..tried but no success
Click to expand...
Click to collapse
if you have winrar on your computer cab files are associated to it. well atleast mine was . . .

BRAIN_STEW said:
if you have winrar on your computer cab files are associated to it. well atleast mine was . . .
Click to expand...
Click to collapse
those are no issue...l dont have any lock to extract cab files from software they provide in other thread..l just download generic uk from thred where is all reay extracted...but my native mr1 was generic en...so that is why l wait to some extract cabs from generic en

Anybody got the Transcriber.cab ? With the latest Mr2 release the handwriting is gone. To get it back, we would need that transcriber cab.
I cannot find it in any of those uploaded cabs. Thanks!

big thanks!

The UK X2 has the tileWave colour as Red...does this also have it red?It would be SUPER AWESOME!

circleofomega said:
The UK X2 has the tileWave colour as Red...does this also have it red?It would be SUPER AWESOME!
Click to expand...
Click to collapse
Can't be, because all roms (that i have checked) are identical except those cabfiles that specify the language-version for the device.
If this is a special-rom, then please post here the device-info. If this differs from the list of device-infos i have on track, then i'll create a custom cab that you could use for getting the same look..

Need help flashing back to stock rom

Hi everybody,
I tried a custom rom but i'm not happy about it. Now i want to flash back to the stock acer rom but now I get the error message SKU_incompatible.
I use an English custom rom and want to flash back to Dutch stock rom.
What to do ??
EDIT: Never mind, already found the solution, topic can be deleted

Please help
RichardKim06 said:
Hi everybody,
I tried a custom rom but i'm not happy about it. Now i want to flash back to the stock acer rom but now I get the error message SKU_incompatible.
I use an English custom rom and want to flash back to Dutch stock rom.
What to do ??
EDIT: Never mind, already found the solution, topic can be deleted
Click to expand...
Click to collapse
Kan you please tell me how you did? i have the same problem with mine

search for a cab called oslangnl.cab or something that looks like it, install it and you can flash back to the DUTCH stock rom, if your stock rom has a different language this doesn't help you..

i can help
you can use toolsbyanper.exe to dump the original rom. you have to download barin's kitchen and get the tool from it because anper's site seem to be down.
you can search this forum but if you're lazy, just pm me your email and ill mail you the stuff. you only need the 3.x hacked RUU and also download your official rom (your language) from acer.
the rest i'll email to you.

Flash back to Original Rom
This is very simple !
Acer will verify that the system language mach the language of the updating ROM... So, if you want to update an NL Rom to an existing EN system, it will refuse to execute it...
The trick is to modify one registry in order to make ACER think that you've installed your system in the disered language (here Dutch or NL)
So grab a Registry editor and modify HKEY_LOCAL_MACHINE\ControlPanel\ACER\SystemInfo\Software\Language from "EN" to "NL" ... then flash to stock ROM...
I can also provide you a CAB if desired ...
Worked great with me when I did the same from EN to FR ...
Good luck

bevoc said:
you can use toolsbyanper.exe to dump the original rom. you have to download barin's kitchen and get the tool from it because anper's site seem to be down.
you can search this forum but if you're lazy, just pm me your email and ill mail you the stuff. you only need the 3.x hacked RUU and also download your official rom (your language) from acer.
the rest i'll email to you.
Click to expand...
Click to collapse
can you e-mail me the rest ?