I am having O2 XDA IIs mini and facing a problem that whenever i soft reset my phone it displays band of three colour Red Green and Blue on the screen and it do not boot.
when I press jointly communication button + recording button on the right side of the mobile and reset button holding other two it boots in a proper way
After booting the buttons on the mobile like up down send stop buttons stops working but when i press the messaging button and internet explorer button (Hardware Buttons) one by one the all the button starts working properly
please help me rectify the problem
I would suggest reflashing an official ROM back on there first and see if that fixes the problem. If you haven't ever falshed a new ROM on it you might also want to check and see if maybe theres some dirt or something keeping the camera button depressed. That would cause you to boot directly into the bootloader (the 3 colored screen), but since you get it to boot with the second method you try and it doesn't boot directly in to camera mode that probably isn't the cause.
It is stuck at the white HTC splash screen when you first start up the phone....after that its just a black screen, ive tried both hard and soft resets. I heard theres a way to flash it from the bootloader but i dont know how....So guys help me out....I really wanna fix this thing
CraigC94 said:
It is stuck at the white HTC splash screen when you first start up the phone....after that its just a black screen, ive tried both hard and soft resets. I heard theres a way to flash it from the bootloader but i dont know how....So guys help me out....I really wanna fix this thing
Click to expand...
Click to collapse
Hi there;
To get into the bootloader mode, switch phone off and then hold the red/green answer buttons, and then power up the phone, hold this down until you get the 3 different colours on the screen.
*By the way, if anyone more experienced wishes to correct me, feel free*
*Damn Doublepost*
To enter the bootloader:
Hold down the camera button and reset device with the stylus. Keep holding the camera button until you see 'tricolor' bootloader screen.
An alternative way to enter bootloader:
Switch the device off by long pressing O/I (power) button. hold down the camera button while pressing the O/I button about 1 second. Keep holding the camera button until you see 'tricolor' bootloader screen.
Alternative(universal?) bootloader(3)
As almost all htc smartphones with onboard camera, when you push and hold the camera(photo) button, and plug in usb adapter. Even a "stupid" usb power adapter will work.
To hard reset:
Hold down send/reject buttons (green/red at the front) and reset with the stylus; release the stylus but keep holding the buttons till you get 'this will erase all your personal data' message, then press 'action' (big front button) to hard reset.
Good LUck
Same here
I have a HTC Touch 6900 I tried to upgrade the rom and now the HTC won't boot up. I tried to hard reset, and tried to get to the bootloader but nothing can anyone help me, Please
i had this same problem five minutes ago i removed the battery for a few minutes and replaced it and it turned on
Rdit:
--
ok the problem is solved... i´ve found the right unbrick ROM now it works
--
ok... now i have the same Problem. I wanted to flash from Onyx WM6.5 (5.0) to the original Vodafone Rom WM6 which i dumped.
After the flash finished, the device rebooted, the Vodafone screen was on the display and then it was black...
Hardreset = no change
Flashing back to Onyx = no change
remove battery = no change
bootloader is reachable and flashing works but the problem with booting is still there
Hi, I am having problems getting my X2 into boot mode in order to update the firmware to MR1- I've followed the instructions on SE Update Service (press and hold volume down button and power button until white screen appears)
All that happens is the vibration feedback to indicate power on, then the phone loads up as normal with the logo in a black background???? anyone else come across this?
help me X2
hi all fri
i had one sony x2 ,but have some problem !can you tell me how to enter undate mode !and X2 chinese rom! thanks
do you press and HOLD both buttons till the desired screen appears? Should not release Power button before the screen emerges..
Yes I did, It's just loads up as normal, I have the xperia x1 so I'm not new to this devices, anyone experienced this before?
Are you sure that you are doing it exactly like this:
1. Remove and re-insert battery.
2. Press AND HOLD the volume down button.
3. Press AND HOLD the power button at the same time.
Hold the two buttons (and no other buttons) until logo on white background appears.
The order is important, first the volume down button - keep pressed, then the power button - keep both pressed.
The most important thing that many people miss is...
You must NOT have the USB cable plugged in when you do this. Only plug the phone in after the white screen appears.
This is not my first xperia as I still have the x1, so I do know what I'm doing, the phone boots up as normal (sony ericsson logo with the 'black' background) unlike the x1 with the tricolor screen. Is there anyother way to enter the bootloader or reset the whole ROM? someone please help as I can't update my phone and spony ericssonwon't do anything about it because it hasn't been officially released in the UK :S
i have the same issue tryed every thing (volume down + power =nothing. volume down + power +soft reset button= nothing. look in the registry found nothing relevant to bootloader )i think bootloder got messed up or something. is there a folder or something containing the bootloder
adidas35th said:
Hi, I am having problems getting my X2 into boot mode in order to update the firmware to MR1- I've followed the instructions on SE Update Service (press and hold volume down button and power button until white screen appears)
All that happens is the vibration feedback to indicate power on, then the phone loads up as normal with the logo in a black background???? anyone else come across this?
Click to expand...
Click to collapse
Exactly the same problem
same here, very frustrated, need my phone back to factory settings! any1 help please???
It's important that you normally turn off the phone before getting out the battery or it will reboot normally when the battery is inserted.
X2 DEAD
I also have the same problem as my device does not turn on nor k is functioning BOOTLOADER MODE.
only once beats vibrating k after the computer sees an unknown device.
I left my phone in few mobile services, nobody did any good to it - same problem still left. Last chance will be SE service.
do u find solution to repair your x2
do u find solution to repair your x2
No.. my phone few weeks ago went dead (after installing custom cab's)..now its only peace of trash
Giz1984 said:
same here, very frustrated, need my phone back to factory settings! any1 help please???
Click to expand...
Click to collapse
To get back into factory-defaults, then use the Phone reset found under Settings->System. That will re-install everything.
Hi!
I've flashed my phone quite a few times and now I can't get pass the tri color boot up screen. It all started when I started to use task29 for my flashing. Wasn't the first time I used it but the last time I did the phone just ended up with (what it seems like no rom). When I press the power button the phone loads the tri color screen saying serial or USB (if USB connected) I've tried to reflash with both SD-card and USB but it ends up the same way. Flashing reaches 100% (tried stock rom and others) but when booting up it still goes to the tri color screen.
Using SPL 1.56 OliNex.
Hopefully somewould knows what to do. Big thanks!
looks to me like your volume down button may be stuck in, see if it is and what happens after that
Hi. Well the volume button is stuck but it usually works by pressing the power button a couple of sec. now that doesn't work
sabio said:
Hi. Well the volume button is stuck but it usually works by pressing the power button a couple of sec. now that doesn't work
Click to expand...
Click to collapse
then you need to unstick the button, it will never boot properly otherwise.
Hi all
I just get the white light and blank screen (no logo, no bootup screen, nothing) on during my tablet boot up. I have tried everything (Power + up button, plug and unplug the power with hold on the up bottom etc) I still can't to get into recovery (factory) mode.
Every time, white light just on and off late. I have also tried to put aside the tablet for few weeks to use up all the battery and restart. Same happen.
Any suggestion I can get in the recovery mode ?
Thanks to all for your answers!!!!! :fingers-crossed::fingers-crossed: