Hello there!
I have a HTC Hermes phone.
Where I live there isn't 3G coverage at all.
When I am in places where is good 3G coverage the phone works well on 3G networks.
When I use EDGE or GSM networks it fails randomly.
I cannot make phone calls, and people whose call me get the sound "The call partner is not available."
Now I am using Windows Phone 6.5.
When I used other versions it wasn't work either.
Now I have radio 1.41.00.10
What settings should I use?
Please help!
Did you try to turn off (UMTS) 3G?
It is in CommManager?
Thanks for your reply!
Yes, I have tried this, it change network type to GSM, and network to EDGE.
But, after that it does the same.
Calls sometimes work, sometimes not.
And all the time the signal quality is almost full.
But I run into an other thing.
When I want to set to send my Caller ID, I tap get settings in the Comm Manager, it shows the message "Cannot read settings from the network. Try again later or disconnect data connection and try again"
What data connection does it mean?
hello everyone, my nexus s 4g is flashed to boost, i been using it for 3 months without problems but in the last 2 weeks the internet was working too slow and i did a hard reset to the phone with the dial code (*#*#786#*#*)
after the hard reset the phone didn't have service because the msid and phone # changed, i went into cdma workshop and restore the msid and phone # and the phone was working again, i can make and receive calls and send and receive texts
but now my problem is that the phone don't show the 3g icon and doesn't connect to internet
i will appreciate if somebody can help me get the 3g working again
thanks
This may sound stupid, but s mobile data enabled in settings -> wireless & network settings -> mobile networks ?
If it is, then have you tried enabling airplane mode and then disabling it? There are times when my NxS drops 3G connection for no apparent reason and this is one way I can get it back.
I saw this posted in the radio guide as way to "retrieve 3G data connection"
Code:
1. Go to Dialer. Dial *#*#4636#*#*
2. Go to Phone information. Choose the preferred network to
"GSM Auto PRL" or "CDMA Auto PRL" or whatever you have.
3. Scroll down, deactivate and activate Phone Radio.
4. Press Menu button.
5. Select Phone frequency, then choose your country.
6. In the previous menu push the Home button to go back to Homescreen.
7. Reboot.
(By Brainmaster)
Click to expand...
Click to collapse
hello all
My phone will lose the network signal and respond to any attempt to make a call with 'No Network Available' trying serch network "Error Seach"..
I have found that turning on Aeroplane Mode, then turning this off again wakes the phone up and it finds my home network (Telcel/mexico) immediately or sometimes does not return need extract sim or reboot.
another problem is that when I make a call not heard anything
Problem software?
Is there a bug in the latest release that others have noticed, or is it the view of the experts here that the phone has a defect?
I´m trying chagen option dial pad *#*#4636#*#* an "phone information" find and change "preferred network type" to "LTE/GSM/CDMA auto (PRL)" and reboot phone after changes not save
Thanks,
Sorry google translade
Help!Help!Help!Help!
Hi guys,
I am with Freedom Mobile - Canadian provider. I've purchased the phone from Amazon, - US version. Connected it yesterday. Worked fine, but had no LTE. I played with some settings and now I ONLY have LTE and cannot make voice calls. Whenever I try to make a voice call phone is trying to connect, but fails in around 30 seconds telling me Network is not available for voice calls.
Was wondering if anyone experienced similar problems.
Additionally, would you mind sharing settings under the below 2 menus, that work for you for Freedom Mobile:
1. Mobile network settings -> "Preferred Network type"
2. In the hidden menu, dial: *#*#4636#*#* under "Phone Information" what is your's "Set Preferred network type" selection?
thank you, I would appreciate your help.
Flash modem from your OS once again. My collegue had similar problem. Tapped something what shouldn't be tapped and disabled 2G, 3G networks. Does Freedom Mobile support VoLTE technology? If not then you will not be able to call via LTE.
Hello there. So i just got a Nokia 6 and i'm having the same issue. Can't make or receive calls but i can send and receive texts and can use the LTE service for data. So i'm supposed to flash what exactly? And any resources i can refer to for the flashing process? P.S: I'm a noob
just got the phone yesterday and updated it to the P beta. everything works amazingly well for a beta in my opinion, BUT i cant receive calls. outgoing calls, texts, web and apps are just fine.
spent almost 2 hours at tmobile flipping all the settings around and no luck. any ideas would be appreciated.
Same issue here bro...Incoming don't ring but I get voicemail notifications.... Really annoying, even if it is a DP.
Turns out the beta doesn't play well with the essential LTE. Switch to 3g and calls will come through. Hopefully it doesn't take long to find a work around for it
I believe the people having this issue have volte enabled...try and disable volte (it's broken anyway and more than likely why calls won't ring through) and see if that works
Got same issue... My experience was that I could solve the problem with reboot.
Issue came after playing on settings for mobile network.
Is meaning, when you do this you have to reboot afterwards otherwise you can't receive calls
Try it.
vergilbt said:
Got same issue... My experience was that I could solve the problem with reboot.
Issue came after playing on settings for mobile network.
Is meaning, when you do this you have to reboot afterwards otherwise you can't receive calls
Try it.
Click to expand...
Click to collapse
Tried rebooting multiple times while changing settings around. The only way I can get the calls to come through is by going without LTE completely.
knotjeff said:
Tried rebooting multiple times while changing settings around. The only way I can get the calls to come through is by going without LTE completely.
Click to expand...
Click to collapse
Settings/network settings/mobile network/advanced/enhanced LTE?
I had the same issue and to fix mine I just enabled Wifi Calling.
When on wifi I didn't get a call, just missed call notification. After enabling wifi calling, it comes through without issue.
I tested calling off wifi and on wifi and all calls come through good now.
This could be similar, so you guys might want to look at that also.
Good luck!
Heard from a few that this was solved by going into phone app settings -> calls -> calling accounts, then turning on "receive incoming calls". Seems it's disabled to save battery? Can't confirm as I just flashed to try it out and then went back to 8.1 because I like themes too much. Lol.
I'm on Sprint and was never able to make or receive calls regardless of Network settings in the easily accessible options menu.
The following fixed my issue. You can access this menu without downloading an app but I forget how so it's easier to just download the free app https://play.google.com/store/apps/details?id=com.xsquarestudio.forcelte
I had my network mode set to LTE/CDMA when first using this app, and somewhere in the middle I changed it to CDMA but I'm not sure how much that impacted the actual fix.
These were my steps. I'm not responsible for any damage this may cause to your device as I'm not sure if messing with these settings is foolproof or not.
First, opened previously linked app "Force LTE" then under "Set Preferred Network Type" I changed to CDMA only. Enabled/disabled airplane mode. This seemed to do nothing as LTE was still showing in statusbar.
I then chose CDMA auto (PRL), airplane mode on/off, didn't seem to do much either. LTE still showed in statusbar and couldn't make calls. Also "Voice Network Type" showed "Emergency Calls only" inside the app.
I then chose the 3 dot menu and chose "select radio band". I changed that to United States, without resolving problem. Then selected "Cellular 800" and this may have solved the problem, but I continued on and selected PCS, fiddled with some settings in Phones settings menu. Was finally able to receive calls and my signal indicator showed 3G. In app Voice Network Type was listed as 1xRtt. I decided to select radio band once more and chose Class 10.
Calls were still functioning fine. So I went into Main settings menu and changed mobile network from CDMA to LTE/CDMA. LTE kicked in and calls still work!
Again, these settings may only work for Sprint hence the PCS Network option, and I believe Sprint may utilize the 800mhz frequency. The app might show you different options depending on your carrier. I don't know.
Anyway, fully functioning! Woohoo!!
Forgetfull said:
Settings/network settings/mobile network/advanced/enhanced LTE?
Click to expand...
Click to collapse
I don't have anything in my settings that says "enhanced LTE" .
Tried using the 4g/LTE and the LTE only options. Neither would let calls through.
I have this problem using the Essential PH-1 with Android 9 Pie in South Korea on the KT network. It should be fully compatible, according to radio specifications, however it only works when I change the following setting:
Settings | Network & Internet | Mobile network | Advanced | Preferred network type | 3G
This is not ideal, since it makes the Internet slow, but at least I can make/receive voice calls. I submitted a support ticket to Essential requesting their official help (I'm well within warranty).
I had the same issue when I use my Att prepaid plan. The problem is caused by wrong network type, you can send text and browse internet, because they use the different channel. My PH-1 wrongly recognized the sim as CDMA/LTE mode, just switch it to 4G/LTE, it will be work. Go to Settings, then search "wi-fi calling", point "advanced" then you can see an opinion "Preferred network type" if you are ATT or T-mobile user, and your preferred network type is "LTE/CDMA“ then your phone cannot make call. Switch it to "4G/LTE", you phone will be work. BTW, Verzion uses CDMA, so if you are Verzion user, CDMA/LTE will work for you phone.