I am facing a strange problem with every android rom i am using.
When i open the haret.exe to run the android then boot screen stops at this error.ss
/bin/sh: can't access tty; job control turned off
and then nothing happens. i have to take to take out battery and insert again to use wm and den if i again try to run android then same problem occurs.
But if i delete all folders in sd card of android rom except 1gb data.img and den extract all folders back in sd card den it starts working..
But again it wont work on next restart or shut down..
any idea..???
using energy rom oct radio 2.07.50.27_2
no one facing this issue????????????????????
I've heard that you should not have a radio below 2.12
Sent from my HTC HD2 using XDA App
Also, try change your womrom and post in the right forum. This is development section
EDIT: winmo rom*
Sent from my HTC HD2 using XDA App
Have u tried formatting your sdcard
Sent from my HTC HD2 using XDA App
norpan111 said:
I've heard that you should not have a radio below 2.12
Sent from my HTC HD2 using XDA App
Click to expand...
Click to collapse
norpan111 said:
Also, try change your womrom and post in the right forum. This is development section
EDIT: winmo rom*
Sent from my HTC HD2 using XDA App
Click to expand...
Click to collapse
veda_sticks said:
Have u tried formatting your sdcard
Sent from my HTC HD2 using XDA App
Click to expand...
Click to collapse
Thanks guys for your replies. and i have tried with radio 2.14.50 also.. but same issue.. and i formatted my card many times. still same problem. First boot is ok. everything works fine. but after restart from winmo it doesn't boot.
And I am using Android capable Energy rom. so i think this is not a rom related problem.
mon_money said:
Thanks guys for your replies. and i have tried with radio 2.14.50 also.. but same issue.. and i formatted my card many times. still same problem. First boot is ok. everything works fine. but after restart from winmo it doesn't boot.
And I am using Android capable Energy rom. so i think this is not a rom related problem.
Click to expand...
Click to collapse
can you upload the file startup.txt maybe something messed up?
also can you write the folder you are installing the rom, and please write the rom name.
regards
boldman78 said:
can you upload the file startup.txt maybe something messed up?
also can you write the folder you are installing the rom, and please write the rom name.
regards
Click to expand...
Click to collapse
Startup file data
set mtype 2525
set ramaddr 0x11800000
set ramsize 0x1e400000
set initrd_offset 0x00a00000
set KERNEL zImage
set initrd initrd.gz
set cmdline "rel_path=android data_size=1024"
#rel_path: Android ( this is the android folder in the sdcard)
# data_size: 512 for 512MB, 1024 for 1gb, 2048 for 2gb ( specify the size of data.img)
and m using tytung nexushd2-frg83 v1.3 release date 12 oct 2010
and i am having this problem with every Android rom i am using. and m extracting all folder in root of sd card.
My to
I experienced this problem to.
Here are some steps i prompted.
1. Format your SD card by using the Format Option at your phone.
2. Run a Stock ROM from HTC, download a ROM update from the HTC website.
3. Always use a Radio 2.08 or above.
So what you are gonna do is as follow.
Format your SD card, install a fresh original ROM from HTC. After that remove the black plate, and press the RED button for 5 seconds. After that install Radio 2.15 it can be found trough Google. Then put Android folder in the root of your SD card, and run the *****!
c0r1tr0n said:
I experienced this problem to.
Here are some steps i prompted.
1. Format your SD card by using the Format Option at your phone.
2. Run a Stock ROM from HTC, download a ROM update from the HTC website.
3. Always use a Radio 2.08 or above.
So what you are gonna do is as follow.
Format your SD card, install a fresh original ROM from HTC. After that remove the black plate, and press the RED button for 5 seconds. After that install Radio 2.15 it can be found trough Google. Then put Android folder in the root of your SD card, and run the *****!
Click to expand...
Click to collapse
Thanks for your help. but i dont think 2.15.50 radio is compatible with stock 1.66 rom. for stock roms i think radio with 2.x.51 is needed..
Anyways will try these steps and will tell the result.
big thanks for your help again.
2.15 will run flawless on 1.66 stock rom. I'm running it on a 1.66 stock ROM to.
If it doesn't work, just reply and i'll try to help you out.
Link for the Radio I'm using:
http://www.vbnfiles.com/xda/HTC HD2 (Leo)/Radios/Radio_2_15_50_14.rar
Link to the Android i'm running. It runs verry smooth and flawless.
http://forum.xda-developers.com/showthread.php?t=747492
c0r1tr0n said:
2.15 will run flawless on 1.66 stock rom. I'm running it on a 1.66 stock ROM to.
If it doesn't work, just reply and i'll try to help you out.
Click to expand...
Click to collapse
Olryt will try it . but actually i am using 2.07.50 radio which gives excellent battery life and internet speed for my area. i used 2.14,2.10,2.12,2.08. but none of them gave me satisfaction like this radio.
and one more thing. if this is radio related problem then how come first boot is completed?? no robot voice on call fast internet speed and rest of the things working very fine and fine battery life as well on 2.07.50
any idea????
thx 4 ur reply.
edit: I already used that same darkstone rom yesterday for android.. but having same problem..
mon_money said:
Startup file data
set mtype 2525
set ramaddr 0x11800000
set ramsize 0x1e400000
set initrd_offset 0x00a00000
set KERNEL zImage
set initrd initrd.gz
set cmdline "rel_path=android data_size=1024 loop_partition=mmcblk0"
#rel_path: Android ( this is the android folder in the sdcard)
# data_size: 512 for 512MB, 1024 for 1gb, 2048 for 2gb ( specify the size of data.img)
and m using tytung nexushd2-frg83 v1.3 release date 12 oct 2010
and i am having this problem with every Android rom i am using. and m extracting all folder in root of sd card.
Click to expand...
Click to collapse
try to add this "loop_partition=mmcblk0to" your startup.txt so the line will look like that:
set cmdline "rel_path=android data_size=1024 loop_partition=mmcblk0"
hope it will help
regards
boldman78 said:
try to add this "loop_partition=mmcblk0to" your startup.txt so the line will look like that:
set cmdline "rel_path=android data_size=1024 loop_partition=mmcblk0"
hope it will help
regards
Click to expand...
Click to collapse
NO luck.. i tried it but again same problem. booting stops at same error.
but few new lines comes after adding that line which are as follow
Failed to find rootfs on sd card, you need to unzio a rootfs zip file to the root of your sd card
** it is already present on the root of my sd card..
Strange problem....
My you need to try another SD Card or something? May some files get corrupted by your phone? Cause it seems to boot without problems at the first time, but after that it won't fire up anymore. You tried the Android i listed in my last post already? I can upload it to my host if you want, so you dont need to wait for ages to get the download complete.
mon_money said:
NO luck.. i tried it but again same problem. booting stops at same error.
but few new lines comes after adding that line which are as follow
Failed to find rootfs on sd card, you need to unzio a rootfs zip file to the root of your sd card
** it is already present on the root of my sd card..
Click to expand...
Click to collapse
try these steps in running Android, never failed me everytime
you need to have
1. HSPL
2. SDcard formatted with SD Formatter from Panasonic
3. at least an Android friendly WINMO ROM (though some people have reported being
able to run android on the latest stock 3.14 ROM)
as you have a really strange problem
i suggest you do a Task 29 on your device, before flashing the winmo ROM
Your problem is your using 2.07 radio. You need 2.08 and higher. This is discussed in almost every build thread if this section.
c0r1tr0n said:
Strange problem....
My you need to try another SD Card or something? May some files get corrupted by your phone? Cause it seems to boot without problems at the first time, but after that it won't fire up anymore. You tried the Android i listed in my last post already? I can upload it to my host if you want, so you dont need to wait for ages to get the download complete.
Click to expand...
Click to collapse
" Thx for your extreme help bro. but i have almost all android roms downloaded already. but this same problem is bugging me alot.. anyways m buying an extra sd card tommorow for android.. will try from that one. then revert you back."
jigners said:
try these steps in running Android, never failed me everytime
you need to have
1. HSPL
2. SDcard formatted with SD Formatter from Panasonic
3. at least an Android friendly WINMO ROM (though some people have reported being
able to run android on the latest stock 3.14 ROM)
as you have a really strange problem
i suggest you do a Task 29 on your device, before flashing the winmo ROM
Click to expand...
Click to collapse
" I have hspl2 2.08 installed.. and i formatted my sd card with sony card reader and then again formatted with hd2. i am running android friendly rom ENERGY already.. and i always do task29 before upgrading my hd2 to a new rom..
Everything works fine on first boot.. it is just after restarting it doesn;t work.."
mattfmartin said:
Your problem is your using 2.07 radio. You need 2.08 and higher. This is discussed in almost every build thread if this section.
Click to expand...
Click to collapse
" i have tried with 2.10,2.12,2.14 and 2.15 radios.. all .50 but same problem .. no luck.."
Me too!
I'm having the exact same problem. I as well have followed all steps.
not developer
try to format the hd 2
Related
OK FELLAS,
i'm not a noob. been flashing for a while now and am pretty much tech savvy, but this one has me for a loop. recently, my phone just started doing this; i can install and launch any and all android builds so readily available here from the XDA chefs. EVEN the DARKSTONE DESIRE HD BETA 2 worked and i played with it for an hour or so. HERE IS THE PROBLEM; i used to in the beginning be able to boot android over and over and over with my android launcher icon thats built into the current energy rom im using. (24631 04 sep) however now after a reboot, I run into a brick wall with the prompt that reads "cant find rootfs. you need to unzip a rootfs file to your memory card. job control turned off"
here are the things i have tried to remedy this:
1. format card= didnt fix
2. try a different card= i have 3 different cards; this didnt fix it either.
Only thing i havent tried which i am reluctant to try is task 29 and reload the WINMO ROM.
ANYONE ELSE OUT THERE EXPERIENCING THIS AND IF SO, HOW DID YOU FIX IT?
bluevmax92 said:
OK FELLAS,
i'm not a noob. been flashing for a while now and am pretty much tech savvy, but this one has me for a loop. recently, my phone just started doing this; i can install and launch any and all android builds so readily available here from the XDA chefs. EVEN the DARKSTONE DESIRE HD BETA 2 worked and i played with it for an hour or so. HERE IS THE PROBLEM; i used to in the beginning be able to boot android over and over and over with my android launcher icon thats built into the current energy rom im using. (24631 04 sep) however now after a reboot, I run into a brick wall with the prompt that reads "cant find rootfs. you need to unzip a rootfs file to your memory card. job control turned off"
here are the things i have tried to remedy this:
1. format card= didnt fix
2. try a different card= i have 3 different cards; this didnt fix it either.
Only thing i havent tried which i am reluctant to try is task 29 and reload the WINMO ROM.
ANYONE ELSE OUT THERE EXPERIENCING THIS AND IF SO, HOW DID YOU FIX IT?
Click to expand...
Click to collapse
What Rom radio you using?
Are you using an auto boot or multiboot
Are you renaming the folder to Android and putting that folder on root? And dies your startup file read rel_path=android
If all correct
Seems like task29
And new Rom radio is the answer
Sent from my HTC HD2 using Tapatalk
whynot66 said:
What Rom radio you using?
Are you using an auto boot or multiboot
Are you renaming the folder to Android and putting that folder on root? And dies your startup file read rel_path=android
If all correct
Seems like task29
And new Rom radio is the answer
Sent from my HTC HD2 using Tapatalk
Click to expand...
Click to collapse
Radio_2_12_50_02_2
AND ROM IS ENERGY 24631 04 SEP 2010
HSPL3
ALSO AN UPDATE; REFLASHED 24631 UPDATED DATE,TIME,QUICK GPS, AND THEN GET THIS; IT BOOTED DESIRE HD ROM SUPER QUICK BUT OTHER BUILD IM USING Core_Droid_V.0.2 STILL DIDNT WORK. IM GONNA TRY DROPPING ANOTHER ROOTFS.IMG ON THE CARD AND TRY AGAIN.
I had a similar problem, the problem was that I had unzipped the contents of the "android" folder to the root of my SDcard. What I should have done was copy the folder to the root of the SDcard, after I did this it worked perfectly
I have the same problem here, but not only with the DARKSTONE DESIRE HD BETA 2 ROM. A lot Android ROMs boots great the first time, but after a phone reboot I was unable to boot the Android ROM again.
It shows me these message: "cant find rootfs. you need to unzip a rootfs file to your memory card. job control turned off" or the boot loader freezed completely with some stripes on the screen. any ideas?
RAIDO: 2.08.50.05
ROM: Artemis 30.0 GER (5.2.23576)
Update:
Got a solution from this thread: http://forum.xda-developers.com/showthread.php?t=788764
Just extract your DARKSTONE DESIRE HD BETA 2 ROM into "/Storage Card/Android" and boot it. done!
All you have to do is delete the android folder everytime you boot up android. I was running into the same thing after the initial setup worked good but wouldn't boot back after I went back to windows.
Sent from my HD2 running Darkstone Froyo V2.1
I have downloaded mdj adroid and installed on my root of storagecard. Updated my radio, installed hspl3. Tried other romes for htc. but it freeze with green htc logo. and i have installed 512 data.img to my hd2. Its a european hd2. i have waited hours to load reinstaled few times it gave the same result.
Do some1 know any solution?
coolgut said:
I have downloaded mdj adroid and installed on my root of storagecard. Updated my radio, installed hspl3. Tried other romes for htc. but it freeze with green htc logo. and i have installed 512 data.img to my hd2. Its a european hd2. i have waited hours to load reinstaled few times it gave the same result.
Do some1 know any solution?
Click to expand...
Click to collapse
Did you copy the android folder to the root of your SD card with all the contents inside? Or did you copy the contents to the root of the SD card?
Dblfstr said:
Did you copy the android folder to the root of your SD card with all the contents inside? Or did you copy the contents to the root of the SD card?
Click to expand...
Click to collapse
I have put the android folder to my storagecard and put the data.img to my android folder
coolgut said:
I have put the android folder to my storagecard and put the data.img to my android folder
Click to expand...
Click to collapse
How long did you wait while it was 'stuck' at the htc screen?
Edit: Oh, Hours!
Did you format your SD card to FAT32 first?
coolgut said:
I have downloaded mdj adroid and installed on my root of storagecard. Updated my radio, installed hspl3. Tried other romes for htc. but it freeze with green htc logo. and i have installed 512 data.img to my hd2. Its a european hd2. i have waited hours to load reinstaled few times it gave the same result.
Do some1 know any solution?
Click to expand...
Click to collapse
Since there are literally thousands of post from peeps who have got it working without any major issues (me included ) i would suggested you are doing something wrong, however since its still essentially in beta there's bound to be issues for some.
best to start again & read carefully! its the best advice i can give.
All the best
http://forum.xda-developers.com/showthread.php?t=767513
you can download and install the android sdk on your computer, once its set up, then you can run a logcat to watch the background processes. if you see it looping, then it's locked up.
my first try i thought it had locked up on initial boot, so i pulled the batt. i rebooted and ran a logcat, saw it hang in the adio portion of setup.
i wiped the sdcard, formated it, and tryed again.
it takes about 5 min for it to setup the background services and kernel, then you'll be able to run logcat and watch it boot. i recomend waiting untill it calms down before even touching the phone even though it will prob be at the log in screen 5-10 min before it calms down.
once it calms down i personaly will log into my google account, wait for it to settle down, the restart it. after it reboots then ill start to play with it, set things up, load apps etc.
Dblfstr said:
How long did you wait while it was 'stuck' at the htc screen?
Edit: Oh, Hours!
Did you format your SD card to FAT32 first?
Click to expand...
Click to collapse
yeah i have formated FAT32
kam333 said:
Since there are literally thousands of post from peeps who have got it working without any major issues (me included ) i would suggested you are doing something wrong, however since its still essentially in beta there's bound to be issues for some.
best to start again & read carefully! its the best advice i can give.
All the best
http://forum.xda-developers.com/showthread.php?t=767513
Click to expand...
Click to collapse
I have read everything, searching on google tried all tutorials on youtube but it didnt help me.
t1h5ta3 said:
you can download and install the android sdk on your computer, once its set up, then you can run a logcat to watch the background processes. if you see it looping, then it's locked up.
my first try i thought it had locked up on initial boot, so i pulled the batt. i rebooted and ran a logcat, saw it hang in the adio portion of setup.
i wiped the sdcard, formated it, and tryed again.
it takes about 5 min for it to setup the background services and kernel, then you'll be able to run logcat and watch it boot. i recomend waiting untill it calms down before even touching the phone even though it will prob be at the log in screen 5-10 min before it calms down.
once it calms down i personaly will log into my google account, wait for it to settle down, the restart it. after it reboots then ill start to play with it, set things up, load apps etc.
Click to expand...
Click to collapse
this is interesting I have search a little bit but its so complicated I gonna take some time to do this if I need help with it I wil mssg you
It still freeze with a green htc. maybe its my startup.
This is my stratup:
#Mdeejay FroYo Revolution v. 1.2
set mtype 2524
set ramaddr 0x11800000
set ramsize 0x1e400000
set KERNEL zImage
set initrd initrd.gz
set initrd_offset 0x00a00000
set cmdline "nand_boot=0"
boot
I have also added:
set data_size 1024
hello
just wanted to say i had kinda the same problem what i ended up doing is installing new rom from energy then extracted the files straight to the sd card hope this helps i had all kinds of problems rom fixed everything instantly
Try using a different kernel. I had the exact same issue as you and I found out that my phone doesn't work with any kernels that screw around with the CPU settings. I would suggest using Hastarin R8 or 7.7 Alt. If that doesn't work, try using the kernel from THIS build. Basically, try a bunch of them. One just might work.
Iam now using energy rom. iam trieying different android roms
I have tried the darkstone froyo 1.7 when it was booting its said can't mount the sd card. I have tried other sd card and it work. I can use android
Really should try reading before you go about tinkering
and for the record that builds not too great
"If you get unable to mount sdcard plz replace set cmdline "rel_path=Android" with set cmdline "rel_path=Android loop_partition=mmcblk0" in startup.txt"
that was originally posted in shubcraft and has since been posted in nearly every up-to-date build.
z33dev33l said:
Really should try reading before you go about tinkering
and for the record that builds not too great
"If you get unable to mount sdcard plz replace set cmdline "rel_path=Android" with set cmdline "rel_path=Android loop_partition=mmcblk0" in startup.txt"
that was originally posted in shubcraft and has since been posted in nearly every up-to-date build.
Click to expand...
Click to collapse
i have formatted my sd card with a other software not from windows. and iam now using mdeejay 1.3
So I've tried to install android build. I had stock rom 3.14.479.2 and I've tried to install HD2Froyo_V3. I've followed the instruction and after running haret few lines of text showed and than nothing, htc display appeared and stayed that way until I've removed the battery. Then I've read that I have to flash a coked Rom in order to install build for android so I downgraded it to 1.48 so I can install HSPL (not sure that it was necessary). I've flashed Energy.Leo.21916.Sense2.5.Cookie.Nov.02 with Radio_2_12_50_02_2 and copied Android folder again, same result. After flashing between stock Rom and Energy.Leo.21916.Sense2.5.Cookie.Nov.02 million of times I'm out of options. The same problem I had with FroyoStone_Sense_V3.2 too. It seemed so easy when I saw it on youtube and I can not believe that I had so bad luck. What I've done wrong? What should I do?
Anyone help?
One word: wait!
the kernel usually creates a 1GB storage for android. This will need some minutes (can take up to 10 minutes on class 2)
Some words for ROMs. Nearly all ROMs will work (the 2.14 ROMs don't) as long as you have a new radio. use 2.10 or higher. some have robo voice problems when calling. if you experience robo try another Radio.
(you should post questions like that in android development discussion. this subforum is for development only)
The folder-name of your rom, what is it and did you change it? You have to change a value in startup.txt aswell if it is different from 'Android'.
Ultimaex is right. Creating a 1gb storage for android will take some time, be patient. I have a 2gb storage which took about 20 minutes from start to finish.
fyi, my setup is tmous stock rom 3.14 and tytung's NexusHD2-FRG83 Froyo 2.2.1 build.
Mr_Q said:
The folder-name of your rom, what is it and did you change it? You have to change a value in startup.txt aswell if it is different from 'Android'.
Click to expand...
Click to collapse
It is Android. And I've been waiting more than 15 minutes and nothing changes, only black screen with HTC on it...
mila1909 said:
It is Android. And I've been waiting more than 15 minutes and nothing changes, only black screen with HTC on it...
Click to expand...
Click to collapse
Ive had this happen to me when I was switching builds. I deleted everything on my sd card that was related to android. Usually, the folders that android makes on your sd card are all lowercase letters. The folders are start with a capital letter are Windows Mobile specific folders. So delete all those folders, dont forget to show hidden files just to make sure you get all the folders. Afterwards, with whatever build you plan on using, its probably best to re-download that build just to make sure no files were edited and copy them to your sd card.
Basically just start with a clean slate and you should be good to go.
i had the same problem just reformat ure memory card on ure htc hd2
I formated the sd every time I tried. It's not that
Same
I got the same problem I have tried everything waited more dan 20 minutes. Formatted 25 times. Iam searching all forums to find something
Ok, I have mentioned this a couple of times and it seems to fix this issue, format the SD card within windows (a full format not a quick one) and ensure that you format it to clusters that are 32kb.
Also what radio are you both using?
I use 2.15.50.14 now, bit tried with every radio over 2.8
fig_jam_uk said:
Ok, I have mentioned this a couple of times and it seems to fix this issue, format the SD card within windows (a full format not a quick one) and ensure that you format it to clusters that are 32kb.
Also what radio are you both using?
Click to expand...
Click to collapse
Iam now trieying what you said. I let u know about it.
I use radio 12.50
nope, again not working...I am desperate
mila1909 said:
nope, again not working...I am desperate
Click to expand...
Click to collapse
Same format didnt help, iam now gonna try other kernels.
well finally works!!! I instaled hspl3 and energy rom and tried with mattcleofroyo1.8 and it happend ...I don't know if it works with another build but this one is good, no problems till now
mila1909 said:
well finally works!!! I instaled hspl3 and energy rom and tried with mattcleofroyo1.8 and it happend ...I don't know if it works with another build but this one is good, no problems till now
Click to expand...
Click to collapse
I got energy rom 2 and hspl3 gonna try that android build i let you know if it works. try to use the zImage from mattcleofroyo with another build.
That build didnt work for me after jumping kernel my leds flashed an i got whit streak.
coolgut said:
That build didnt work for me after jumping kernel my leds flashed an i got whit streak.
Click to expand...
Click to collapse
That's normal at the first boot, he wrote it in his thread.. Was the same for my phone, just let it doin' his thing it will finish after about 10min.
And what I wanted to say, I think mattc 1.8 is one of the best Sense builds out there.. Works so damm' smooth. Old but gold
Yes I agree. I've tried several after this one and got back on mattc...There are few problems but I hope that will be fixed in other versions....
coolgut said:
That build didnt work for me after jumping kernel my leds flashed an i got whit streak.
Click to expand...
Click to collapse
You mean you got all kinds of distorted graphics all over the screen. Black and white stripes kind of thing? If so, that's because you probably replaced zImage but didn't replace initrd.gz. Regardless, if you leave it on the screwed up black/white screen, it should load within 10-15 min.
Ok im new and nobody has written me back about this so i have to ask this way but i flashed to the energy rom and i want android on it, i dont know how to go from where im at to that as all the threads ive seen has said download this and that but i really dont kno how to get energy off to do that but when i hit the launch android button it says "CLRCAD.exe was not found on your storage card...proceeding to launch Haret anyway" ok then "Haret.exe was not found on your storage card..." so can any body help me get android???
Hardware is:
RAM size 576MB
Flash memory size 1024MB
Data bus 32 bits
Software is:
OS version 5.2.21916
Manila version 2.5.20191914.0
ROM version 26 Jan.2011 WWE
Radio version 2.10.50.26
Firstly there are 2 ways of running Android, 1st via sd card and 2nd via NAND memory. The option you choose depends on whether or not you still want to use winmo. If so you need to use the sd card based Android builds. If you only want to use Android then you need to go the NAND based Android build approach.
As you mention running clrcad and haret I'm assuming you want to use the dual bot method, ie both winmo and Android. You will then need to device which Android build you want to try (from the Android SD dev forum) and carefully read the first few posts to see the dev's instructions, but in most cases you need to download and unzip the rom and copy the Android folder to the root of your sd card. In the NRG roms, clicking on the launch Android icon he includes in his build will run the clrcad and haret automatically and boot to Android.
thanx for your reply..thats the thing when i hit launch android it wont go...so when i copy the folder do i download everything even if it says its already on an if installed it might not work? thats where im lost
Try formatting the sd card completely so that there are no funnies on the card, copy the entire Android folder to the sd card root and you can ignore the warning about files that may not work etc.
ok ill give it a try
when you format your sd card will it erase the NRG rom and then you have to put it back on there?
1989jeremy said:
when you format your sd card will it erase the NRG rom and then you have to put it back on there?
Click to expand...
Click to collapse
No! Unless you will install nandroid.
Sent from my HD2 Droid HD using XDA App
ok just checkin..i want android on my sd card
ok i formatted my sd card then copied the android folder to it and it still did launch an when i clicked on the folder to run clrcad it didnt do anything an when i clicked the heret it just went to the htc screen and thats it...what did i do wrong??
Did you give it some time? I would ask the question in the thread for the actual rom you are using. Other users may have a solution for you.
1989jeremy said:
ok i formatted my sd card then copied the android folder to it and it still did launch an when i clicked on the folder to run clrcad it didnt do anything an when i clicked the heret it just went to the htc screen and thats it...what did i do wrong??
Click to expand...
Click to collapse
Good, so you've formatted your sd card and copied the android build, clrcad and haret.exe files to the root....Tapping clrcad (to run) doesn't show any visible signs but its actually working in background, then tap haret...u should see haret loading up & a bunch of text briefly (depends d android build)...The htc screen u saw means d android build is working silently in d background so give it some time...check d android build's page for how long you should wait..(most tk abt 8-20mins, i use nand now so i'm not so sure).....if the above still doesn't work for you,then u should try using d various android/winmo dual-booting cab files out there...
P.S. Devs say its best u load up android within 3 secs of loading WinMo, so be as fast as u can...u could also try disabling htc sense to give a quicker loading time....If dat still doesn't work, then u might have to reflash an android-friendly WinMo ROM.
lol i dont think i gave it enough time..kinda impatient but i got it at the htc screen right now..im using the froyostone v4.0 build
1989jeremy said:
lol i dont think i gave it enough time..kinda impatient but i got it at the htc screen right now..im using the froyostone v4.0 build
Click to expand...
Click to collapse
Dis you read the faq of the build you use? Like, wait 10-15mins on first boot...
Sent from my HD2 Droid HD using XDA App
1989jeremy said:
lol i dont think i gave it enough time..kinda impatient but i got it at the htc screen right now..im using the froyostone v4.0 build
Click to expand...
Click to collapse
Great...Remember 2 always read instructions carefully..the Devs put em there for a reason.
hmm...its been like 40 min an still at the htc screen...i looked for the thread but i cant remember which it was as ive been to a couple of them but neither one says how long the first boot would take
1989jeremy said:
hmm...its been like 40 min an still at the htc screen...i looked for the thread but i cant remember which it was as ive been to a couple of them but neither one says how long the first boot would take
Click to expand...
Click to collapse
Try core evo sd series.
Sent from my HD2 Droid HD using XDA App
do you have the link to the thread? i dont wanna download somethin different you know as a lot of things pop up in search
1989jeremy said:
do you have the link to the thread? i dont wanna download somethin different you know as a lot of things pop up in search
Click to expand...
Click to collapse
Just go to sd development section, it should be on the 2nd page of that section. Try core evo v0.8 by sergio76 or evo carbon remix by motoman.
By the way, what sd card do you have? Model, make, size, class.
Sent from my HD2 Droid HD using XDA App
ok thanx..itll work with the energy rom right?
1989jeremy said:
ok thanx..itll work with the energy rom right?
Click to expand...
Click to collapse
Of course. That's what I was using before nandroid.
Sent from my HD2 Droid HD using XDA App
Hi Guys,
Please help/advice how to proceed further in using Android in HTC HD2 with ScanDisk 8GB SD in HTC HD2 stock ROM.
1> Downloaded MCCM HD V4.0 ROM and copied Android content to the sdcard root directory.
2> Used HaRET to start and got the console started. But it stuck for hours after displaying few lines ending with "Jumping to Kernel(custom)...."
Wanted to try Android in HTC HD2 using SD card without disturbing my STOCK WM.
Thanks in advance.
Regards,
Karthi
It looks like it can't find the appropriate file. Is the Rom in the root of the sd card? Make sure that it is in the root of sd card under a folder named "Android" (w/o the quotations of course).
solide54 said:
It looks like it can't find the appropriate file. Is the Rom in the root of the sd card? Make sure that it is in the root of sd card under a folder named "Android" (w/o the quotations of course).
Click to expand...
Click to collapse
Hi Thanks for the reply.
Yes. Andriod folder is created in the root folder only. Inside the Andriod folder i have other files like HaRET.exe etc. Basically i copied the Andriod folder from the archive as it is to the SD card root.
Thanks.
Regards.
Format your card
mattfmartin said:
Format your card
Click to expand...
Click to collapse
Sorry. Installed quite lot of WM applications in SD Card :-(. Can i take the SD content backup and restore back after formatting.
Thanks.
Regards.
pcarth said:
Sorry. Installed quite lot of WM applications in SD Card :-(. Can i take the SD content backup and restore back after formatting.
Thanks.
Regards.
Click to expand...
Click to collapse
Formatted SD with 64KB sector in FAT32 format and trying again..
Will update back the result.
Thanks.
No success. Still console hanging in the "Jumping to Kernel (custom)...."
Please help/advice.
Thanks.
pcarth said:
No success. Still console hanging in the "Jumping to Kernel (custom)...."
Please help/advice.
Thanks.
Click to expand...
Click to collapse
I know this questions are very basic...
1.Are first running CLRCAD and then HARET?
2.Are you using the HD2 stock Rom?
3.Do you have Hardsspl?
4.What is the version of your rom radio?
I am using MCCM HD 4.0 it runs great.
make sure you have radio above 2.08.50
HTC HD2 Issue in using MCCM HD V4.0A
rusd3v said:
I know this questions are very basic...
1.Are first running CLRCAD and then HARET?
2.Are you using the HD2 stock Rom?
3.Do you have Hardsspl?
4.What is the version of your rom radio?
I am using MCCM HD 4.0 it runs great.
Click to expand...
Click to collapse
-------------------
Hi Thanks for the reply.
1> Yes. CLRCAD executed first and HaRET second.
2> Yes. ROM 1.66.707.1(76641) + Radio 2.07.51.22_2 + Manial Version 2.5.19211619.0
3>Sorry. I am new to this. May i know what is Hardsspl.
4>Radio 2.07.51.22_2
Regards.
rusd3v said:
I know this questions are very basic...
1.Are first running CLRCAD and then HARET?
2.Are you using the HD2 stock Rom?
3.Do you have Hardsspl?
4.What is the version of your rom radio?
I am using MCCM HD 4.0 it runs great.
Click to expand...
Click to collapse
Hi ,
Can you please help/advice how to configure MCCM HD 4.0 for effecient battery usage. It drinks the juice like any thing :-(?. My HTC HD2 have 1200 mA battery.
Thanks & Regards
pcarth said:
Hi ,
Can you please help/advice how to configure MCCM HD 4.0 for effecient battery usage. It drinks the juice like any thing :-(?. My HTC HD2 have 1200 mA battery.
Thanks & Regards
Click to expand...
Click to collapse
Usually after 3-4 reboots the battery use stabilizes at a normal value. At least it always has for me. What I recommend doing is always rebooting several times after a new install.
hello
i tried this rom for hours and hours formatted the sd and made sure everything thing else was set up but it just got stuck during the boot setup and i never got to try it out.
i would still like to try it but i just got irritated and went for a different rom instead
so if you get this to work let me know what you did
veeeeeeeeee said:
i tried this rom for hours and hours formatted the sd and made sure everything thing else was set up but it just got stuck during the boot setup and i never got to try it out.
i would still like to try it but i just got irritated and went for a different rom instead
so if you get this to work let me know what you did
Click to expand...
Click to collapse
Hi,
I Followed the steps as mentioned below.
1> Install HardSPL (1 to 2 mins to install)
2> Update the HTC Leo radio (Appx 6 mins to install)
3> Copy the Android to SD card
4> Execute the CLRCAD & HaRET. Once the screen goes to console mode and after few lines u should see HTC green logo and should be up and running in max 15 min s(depending on ur SD card speed).
For me all settings like the discovery of Wi-Fi / 3G / Data connections was configured in a blink .
Still have the issue like battery drain.
Regards.
Batter drain issue
Hi Guys,
Yday on wards using a app called CPU tuner with custom profile and now getting a reasonable battery time.
Still trying, open for suggestions.
Regards.
Hi Guys,
Still running on a single full charge for past 1Day-12 Hr - 21 Mins and still having 35% of charge. With load of 3.75V still in battery. Now using Battery Indicator to track the usage.
Regards.