Database Users

Sick of THIS!

This isn't my post but I have very same problem and thought i'd bring it to this thread see if anyone happens to have same issue or has solution?
Hi guys,
I've been trying out different android builds but after a while it won't boot in android anymore.
I run the CLRAD and HaReT, it show the command lines and then freezes on the HTC screen.
It is not the first time I'm launching it, everything is allways set up the way I like it and then I want to reboot a final time and it freezes. (first boot only takes 10 min.) Then I have to take out the battery to reset, but everytime after it freezes, tried waiting for +1 hour but no changes.
When I delete all the android files from my SD card and copy the original ones it restarts again and I have to setup everything again.
I tried new wm roms (Miri HD2 wm6.5.x) different radios (now 2.12.50.02.2),
the new HSPL3 but nothing seems to solve this.
edit: now I'm trying to use the mdeejay froyo HD v3.7 rom
I've searched the forum and other users seem to have the same problem, but no solutions have come forward. The people replying allways seem to think it is the first boot that takes 10 min. but it's not that. First boot works fine.
Click to expand...
Click to collapse

What builds have you tried? What memory card are you using (class and size)?Did you format your memory card to FAT32? You could also try deleting app data folder on your storage card, as each time you use a build a bit of it may be left in this folder( it does no harm and will re-create itself straight after). Have you tried any android boot loaders e.g MSKIP android loader v5. No-one else had replied so thought id try and share what little knowledge i have. If you have been asked all this 20 times over, Sorry!

I am using 8gb mem card came with htc Fat32 (formated it using win and htc both)
Win build is dutty's com2 3.14 latest rom
Mdeejay 2.3 Revolution android version.
had jmz's bootloder
Tried everything u said nothing happened...
Trying now MSKIP's boot loader, with fresh installation lets see...
Ur effort time and help is always appreciated thanks Funkdat

maybe because OS's weren't designed to run on a SD card??? Sell your hd2 and get a galaxy s phone.

I feel your pain. Very very frustrating and you feel you have tried everything. Time consuming too.
What bothers me a bit with those builds is that they load up the HTC logo so actually don't see what is happening during bootup. I wonder if you couldn't bypass that?

that wud have been big help if i could see what is actually happening but the Big HTC Logo screen is hiding everything and i am just sick of it.
Well if i could only burn the ROM into HD2 that would have been much better so wouldn't have to worry about anything i have to format my storage card every time or either delete everything on the sd card to make it work duno which file is it causing this error but i hope some one will come up with solution...
CHeers

still the same tried everything...

Hi there,
You do understand that the HD2 was not made nor meant to run Android and that all the Android ROM's are third party ones and unofficial ?
You did not say whether or not you tried to install on the internal memory and not the card ?
Bye,
Itamar

supermaster said:
This isn't my post but I have very same problem and thought i'd bring it to this thread see if anyone happens to have same issue or has solution?
Click to expand...
Click to collapse
did you try starting it, deleting the data.img and starting it again?
nrfitchett4 said:
maybe because OS's weren't designed to run on a SD card??? Sell your hd2 and get a galaxy s phone.
Click to expand...
Click to collapse
Oh the contradiction. You say that, yet you use it too
"Android Playground: HyperDroid 1.6"
You gonna sell your HD2? (now for the crickets )

This might seem stupid, but have you tried deleting the Android folder from your SD card? Or modify this line in startup.txt:
set cmdline "rel_path=Android"
to
set cmdline "rel_path=/"
The problem might be that because of rel_path, it's looking for your android ROM in the "Android" folder. And some applications create that folder (Google goggle for example) to save information. I had an issue quite similar to yours. Now editing startup.txt is the first thing I do in a build. I currently have 5 different builds, one for every day of the week! haha.
Hope this helps!

rr5678 said:
did you try starting it, deleting the data.img and starting it again?
Oh the contradiction. You say that, yet you use it too
"Android Playground: HyperDroid 1.6"
You gonna sell your HD2? (now for the crickets )
Click to expand...
Click to collapse
not at all. I actually rarely boot into android and when I do, I keep my android builds on a seperate sd card. But I'm also not on here starting threads complaining that android won't boot properly on my winmo phone.
That's why its my playground. I am not trying to make android my daily driver.

karendar said:
This might seem stupid, but have you tried deleting the Android folder from your SD card? Or modify this line in startup.txt:
set cmdline "rel_path=Android"
to
set cmdline "rel_path=/"
The problem might be that because of rel_path, it's looking for your android ROM in the "Android" folder. And some applications create that folder (Google goggle for example) to save information. I had an issue quite similar to yours. Now editing startup.txt is the first thing I do in a build. I currently have 5 different builds, one for every day of the week! haha.
Hope this helps!
Click to expand...
Click to collapse
there's only 5 days in a week???

nrfitchett4 said:
not at all. I actually rarely boot into android and when I do, I keep my android builds on a seperate sd card. But I'm also not on here starting threads complaining that android won't boot properly on my winmo phone.
That's why its my playground. I am not trying to make android my daily driver.
Click to expand...
Click to collapse
Well that's true. Android isn't really that stable enough to run often - especially when I see that it sucks down 500mA of power. That leads to 2 hours of battery.
(speaking of separate SD cards, I still have to send my faulty 16GB back to HTC )

Stuck on HTC please help!!!

So I've tried to install android build. I had stock rom 3.14.479.2 and I've tried to install HD2Froyo_V3. I've followed the instruction and after running haret few lines of text showed and than nothing, htc display appeared and stayed that way until I've removed the battery. Then I've read that I have to flash a coked Rom in order to install build for android so I downgraded it to 1.48 so I can install HSPL (not sure that it was necessary). I've flashed Energy.Leo.21916.Sense2.5.Cookie.Nov.02 with Radio_2_12_50_02_2 and copied Android folder again, same result. After flashing between stock Rom and Energy.Leo.21916.Sense2.5.Cookie.Nov.02 million of times I'm out of options. The same problem I had with FroyoStone_Sense_V3.2 too. It seemed so easy when I saw it on youtube and I can not believe that I had so bad luck. What I've done wrong? What should I do?
Anyone help?

One word: wait!
the kernel usually creates a 1GB storage for android. This will need some minutes (can take up to 10 minutes on class 2)
Some words for ROMs. Nearly all ROMs will work (the 2.14 ROMs don't) as long as you have a new radio. use 2.10 or higher. some have robo voice problems when calling. if you experience robo try another Radio.
(you should post questions like that in android development discussion. this subforum is for development only)

The folder-name of your rom, what is it and did you change it? You have to change a value in startup.txt aswell if it is different from 'Android'.

Ultimaex is right. Creating a 1gb storage for android will take some time, be patient. I have a 2gb storage which took about 20 minutes from start to finish.
fyi, my setup is tmous stock rom 3.14 and tytung's NexusHD2-FRG83 Froyo 2.2.1 build.

Mr_Q said:
The folder-name of your rom, what is it and did you change it? You have to change a value in startup.txt aswell if it is different from 'Android'.
Click to expand...
Click to collapse
It is Android. And I've been waiting more than 15 minutes and nothing changes, only black screen with HTC on it...

mila1909 said:
It is Android. And I've been waiting more than 15 minutes and nothing changes, only black screen with HTC on it...
Click to expand...
Click to collapse
Ive had this happen to me when I was switching builds. I deleted everything on my sd card that was related to android. Usually, the folders that android makes on your sd card are all lowercase letters. The folders are start with a capital letter are Windows Mobile specific folders. So delete all those folders, dont forget to show hidden files just to make sure you get all the folders. Afterwards, with whatever build you plan on using, its probably best to re-download that build just to make sure no files were edited and copy them to your sd card.
Basically just start with a clean slate and you should be good to go.

i had the same problem just reformat ure memory card on ure htc hd2

I formated the sd every time I tried. It's not that

Same
I got the same problem I have tried everything waited more dan 20 minutes. Formatted 25 times. Iam searching all forums to find something

Ok, I have mentioned this a couple of times and it seems to fix this issue, format the SD card within windows (a full format not a quick one) and ensure that you format it to clusters that are 32kb.
Also what radio are you both using?

I use 2.15.50.14 now, bit tried with every radio over 2.8

fig_jam_uk said:
Ok, I have mentioned this a couple of times and it seems to fix this issue, format the SD card within windows (a full format not a quick one) and ensure that you format it to clusters that are 32kb.
Also what radio are you both using?
Click to expand...
Click to collapse
Iam now trieying what you said. I let u know about it.
I use radio 12.50

nope, again not working...I am desperate

mila1909 said:
nope, again not working...I am desperate
Click to expand...
Click to collapse
Same format didnt help, iam now gonna try other kernels.

well finally works!!! I instaled hspl3 and energy rom and tried with mattcleofroyo1.8 and it happend ...I don't know if it works with another build but this one is good, no problems till now

mila1909 said:
well finally works!!! I instaled hspl3 and energy rom and tried with mattcleofroyo1.8 and it happend ...I don't know if it works with another build but this one is good, no problems till now
Click to expand...
Click to collapse
I got energy rom 2 and hspl3 gonna try that android build i let you know if it works. try to use the zImage from mattcleofroyo with another build.

That build didnt work for me after jumping kernel my leds flashed an i got whit streak.

coolgut said:
That build didnt work for me after jumping kernel my leds flashed an i got whit streak.
Click to expand...
Click to collapse
That's normal at the first boot, he wrote it in his thread.. Was the same for my phone, just let it doin' his thing it will finish after about 10min.
And what I wanted to say, I think mattc 1.8 is one of the best Sense builds out there.. Works so damm' smooth. Old but gold

Yes I agree. I've tried several after this one and got back on mattc...There are few problems but I hope that will be fixed in other versions....

coolgut said:
That build didnt work for me after jumping kernel my leds flashed an i got whit streak.
Click to expand...
Click to collapse
You mean you got all kinds of distorted graphics all over the screen. Black and white stripes kind of thing? If so, that's because you probably replaced zImage but didn't replace initrd.gz. Regardless, if you leave it on the screwed up black/white screen, it should load within 10-15 min.

[Q] cant get android working on my htc hd2

hi everyone i am currently trying to install android 3.2 on my htc hd2 and the steps i am following are to copy the android folder to the root of my sd card and then once i have done this then to tap on the CLRCAD file then tap the haret file then a loading bar comes up then goes to a black screen and in small writing in the top left hand corner it says
haret boot
shutting down hardware
turning off mmu...
in preloader
psr=600000df
tags preloaded to 0x11b00100 (size 0x0000f00)
kernel relocated to 0x11b0b000 (size0x0023f12c)
initrd relocated to 0x12200000 (size 0x001d0137)
jumping to kernel...
i have repeated this process a dozen times to ensure that i have not missed anything out last nite i made sure that the battery was fully charged and also i updated my rom from the htc website to the latest version as i have read that some people cant get android working at all unless they did this. i did the process until i got the black screen again and left it all night thinking that it may take a long timer as it is the first time i have ever tried loading android but i woke up and the screen was still there i am not sure what i have done wrong i have watched videos on youtube and read forums but no one else seems to have had this problem any help would be greatly appriciated thanks
i have just tried to boot an older version of froyo android the 2.2v i got past the first black screen and it went to the black screen where the white writing starts to scroll down the the writing faded into white lines what am i doing wrong

back up your sdcard contents to your computer.
format it, preferably from a linux box. if your stuck with win-blows, then you can do a full format, not the quick format.
now put JUST THE ANDROID folder on the sdcard.
put sdcard in phone, boot into android. when it boots, dont do ANYTHING for 5 min. reboot.
once it reboots, goahead and log in, synch etc.... then reboot
after that you can coppy the rest of the sdcard contents back over and be good to go.

which winmo rom, radio rom, and android build are u using?

i am using the darkstone froyo 3.7 build i am not sure what radio is or which one i am using i will try what you have suggested and let you know how it goes

right i formated (full) the sd car using windows vista the only way i could do this is plugging my phone into my laptop using the usb and formatting it that way
then i copied just the android folder to my sd card
rebooted the phone and went to file explorer opened the android folder doulbe clicked on clrcad then on haret
i was then stuck on the screen that i was before so i waited 5 mins just like you said to rebooted the phone and it was still on windows.
i repeated the same steps and waited ten minutes still no luck
also just so i understand after i waited five minutes should i be able to reboot the phone i do i have to pull the battery out like i did and where you put (when it reboots login etc)
is there any way you could email me a file to see if it is the files i am using
thanks for all you help so far guys!!!!
i am from th UK i dont know if that makes a difference
i have a 2gb sd card

i have just done some research on the radio versions and round a thread called master radio for the htc hd2 on xda but i am unsure which one to use and could this be the root of my problem thanks again
OS version 8.2.2.1869(21869.5.0.82)
manila version 2.5.20121429.0
ROM version 1.72.206 (8637200) WWE
ROM date 04/15/10
radio version 2.07.51.22_2
Protocol version 15.32.50.07U

i have just done a bit more research and found out that i need to use a .50 for flashing could this be a problem if i dont could this be th root of my problem

very big part I'd say.... It does say on just about EVERY build that you need a .50 radio NOT a .51....

snowy88 said:
i have just done a bit more research and found out that i need to use a .50 for flashing could this be a problem if i dont could this be th root of my problem
Click to expand...
Click to collapse
could be...

u need at least 2.08.50 or higher radio i thought so.
linkie he Definitve Guide To Android On HTC HD2
[RADIO] The HTC HD2 Master Radio Thread ( i would try Leo_RADIO_2.12.50.02_2 or 2.14 )
Good luck tell us when it did work

t1h5ta3 said:
back up your sdcard contents to your computer.
format it, preferably from a linux box. if your stuck with win-blows, then you can do a full format, not the quick format.
now put JUST THE ANDROID folder on the sdcard.
put sdcard in phone, boot into android. when it boots, dont do ANYTHING for 5 min. reboot.
once it reboots, goahead and log in, synch etc.... then reboot
after that you can coppy the rest of the sdcard contents back over and be good to go.
Click to expand...
Click to collapse
snowy88 said:
i was then stuck on the screen that i was before so i waited 5 mins just like you said to rebooted the phone and it was still on windows.
i repeated the same steps and waited ten minutes still no luck
also just so i understand after i waited five minutes should i be able to reboot the phone i do i have to pull the battery out like i did and where you put (when it reboots login etc)
Click to expand...
Click to collapse
no, depending on the class (speed) of your card it'll take 15-20 min to initalize on the first boot... theres alot going on in the background.
once its booted...ie: once it shows the initial android log in screen. ie: it has actualy booted into android.
if you pull the battery in the middle of the first boot, you just corupted the data it was writing.
format the card again - get rid of the corupted files.
now start over.
and yes, you got to have the corect radio installed etc.
most roms have a requirements list... if not folow the stickies.
as ive stated a ton of times in a ton of thereads, its worth installing ether droid explorer or adb on your pc if for no other reason but to be able to run a logcat so you can watch it run comandline, aswell as post it so others can help you debug/troubleshoot.

I have the same issue with linux showing that message then it boots up a green htc sign and stays there.. i left it there for 40 minutes waiting to see if anything would happen and never did. I had android running before but did a full format on my sd card and then installed another and this happens everytime i try.
I am running Miri_Dinik- V 19.0 WWE
Radio: 2.15.50.14
I also am using the 16g sd card that came with my tmo hd2
i have been searching for days for an answer and decided to finally make a post to see if i can get any answers
thanks

[Q] Only hyperdroid 1.7 works. Why?

Hey,
Til now i have tried 12 Android 2.2 Builds. But only Hyperdroid 1.7 worked. But i like shubcract and all the other builds more. Everytime I used the correct Installation ways but 11 builds ended at a green HTC Logo. Thats sad
Can you help me? That would be great.
Oh, and i also tried 6 different custom roms. With hyperdroid I use the new Energy Rom. Thanks

Reltih2200 said:
Hey,
Til now i have tried 12 Android 2.2 Builds. But only Hyperdroid 1.7 worked. But i like shubcract and all the other builds more. Everytime I used the correct Installation ways but 11 builds ended at a green HTC Logo. Thats sad
Can you help me? That would be great.
Oh, and i also tried 6 different custom roms. With hyperdroid I use the new Energy Rom. Thanks
Click to expand...
Click to collapse
You might want to reformat your micro SD card to FAT32 and do a complete install from scratch. My combo has served me well with no issues.

That's what I have done, too.
Aww, it looks like there is no way out :/

Your card may be faulty.

Even when ONE build works every time? Is that possible.
I used an 2GB one and an 1GB one (stupid idea, i know ).
Now I am waiting for my new 8GB one, I'll try it with that, but I can't believe that this could be the problem.
But maybe you are right, thanks for your answer

Reltih2200 said:
Hey,
Til now i have tried 12 Android 2.2 Builds. But only Hyperdroid 1.7 worked. But i like shubcract and all the other builds more. Everytime I used the correct Installation ways but 11 builds ended at a green HTC Logo. Thats sad
Can you help me? That would be great.
Oh, and i also tried 6 different custom roms. With hyperdroid I use the new Energy Rom. Thanks
Click to expand...
Click to collapse
Have you checked startup.txt?

What do I have to check there?

Some builds do take time to load.
Do you have a "loader" to automatically load droid or do you do it through selection of "clrd" and "haret"?
Are you installing the complete build folder?

I tried it with ,,LaunchAndroid'' on the Energy Rom (thats what works perfectly with HyperDroid) and on the other tested Roms, I used the casual method. Even this method worked with HyperDroid really well!
Everytime, I saw the green HTC Logo, I waited over one hour and nothing happens.
Then I gave up.
On HyperDroid, I see the Linux-Penguin and it goes through a black field with white commands on it and then it starts.
When I start all the other builds, I see the black field with the white commands for one second, then the green Logo appears!
To your last question:
I throw the folder on the root of my sdcard and that was it.
That's how it works as hyperdroid 1.7
Or is there another thing for the other builds, which I have to do?

Reltih2200 said:
What do I have to check there?
Click to expand...
Click to collapse
You have to check that rel_path directs to the folder where Android is stored. Some builds are stored in folders named after the builds, whilst others are stored in the default 'Android' folder. If rel_path isn't linked correctly, you will not boot.
This could explain why only Hyperdroid works.
And also, as mentioned by others, wait 20-30 minutes on first boot, it may take a while to create your data.img

This seems to be the reason for it. I didn't tested it yet, but I took a look into the builds folder.
On HyperDroid it looks like this:
set cmdline "rel_path=HyperDroidV1.7"
And on Moto234 EVO v0.3 it looks like this:
set cmdline "rel_path=Android nand_boot=0"
Do I have to change something there?
I see that for HyperDroid, there is no Android Folder, only the folder ,,HyperDroidV1.7''. Thats what the cmdline says, too.
Do I have to change the Moto234 startup.txt-cmdline into
set cmdline "rel_path=Moto234_EVO_Black&Blue_V0.3"
In fact, THERE IS an Android-Folder. For HyperDroid, i put the files directly on the root, not in an android folder. When I take the files out of the Android Folder (for example the Moto234 build) and put it directly to the root of the sd card and I edit the startup.txt like, is it possible, that everything works fine?
I will try it and when it works, I am so happy

Reltih2200 said:
This seems to be the reason for it. I didn't tested it yet, but I took a look into the builds folder.
On HyperDroid it looks like this:
set cmdline "rel_path=HyperDroidV1.7"
And on Moto234 EVO v0.3 it looks like this:
set cmdline "rel_path=Android nand_boot=0"
Do I have to change something there?
I see that for HyperDroid, there is no Android Folder, only the folder ,,HyperDroidV1.7''. Thats what the cmdline says, too.
Do I have to change the Moto234 startup.txt-cmdline into
set cmdline "rel_path=Moto234_EVO_Black&Blue_V0.3"
In fact, THERE IS an Android-Folder. For HyperDroid, i put the files directly on the root, not in an android folder. When I take the files out of the Android Folder (for example the Moto234 build) and put it directly to the root of the sd card and I edit the startup.txt like, is it possible, that everything works fine?
I will try it and when it works, I am so happy
Click to expand...
Click to collapse
First of all, make sure Android is installed in 1 folder on root, and not in a subfolder of that folder. This means that the files should all be put in, for example, H:\Android\ or /sdcard/Android/, and not for example H:\Moto234blablabla\Android\, that's one folder too much (well actually I'm not sure this is - it probably isn't - a requirement, but do it anyways).
Then just change rel_path to the exact spot your startup.txt, or haret and clrcad for that matter, are located. For example: rel_path=Android , or rel_path="Moto234blabla".
Simples, see?
Edit: in case I'm not being very clear: of course don't change the folder structure inside of the Android folder. Files in for example /root/ or /data/ should remain where they are, obviously.

Yeah, but when it is, how you explain it to me, HyperDroid shouldn't work.
As I said, it is this:
set cmdline "rel_path=HyperDroidV1.7"
But the files of Hyperdroid I directly on the sd card, there is no folder or subfolder.
That means, the files are on H: and nothing more.
So, why does it work? I will test it at weekend, because when I have to start all over again with HyperDroid, after nothing worked, it takes to much time.
Maybe it works

Reltih2200 said:
Yeah, but when it is, how you explain it to me, HyperDroid shouldn't work.
As I said, it is this:
set cmdline "rel_path=HyperDroidV1.7"
But the files of Hyperdroid I directly on the sd card, there is no folder or subfolder.
That means, the files are on H: and nothing more.
So, why does it work? I will test it at weekend, because when I have to start all over again with HyperDroid, after nothing worked, it takes to much time.
Maybe it works
Click to expand...
Click to collapse
Do a usb link and check the "Hyper" folder to see if there is another "Hyper" sub folder, this may be the problem. Sometimes one creates a folder and then places the build in that folder which it automatically creates its own.
If there is an "Android" folder, check that as well and make sure there isn't a sub "Hyper" folder; when you open either folders it should open a list consisting of "root" folder, zimg, etc.

So, I did everything mentioned here.
And...nothing works. ONLY HyperDroid 1.7
I mean, that couldn't be. I did everything, i changed the startup.txt, again I used thousand different ROM's. It sucks :/
I am glad to see, that you tried to help me, but it seems to be useless.
I have no idea what to do. Maybe it's better to sell the HD2 and buy a Dell Streak or a Desire HD. Then I have no problems like this.
When you have a nother possible reason for this phenomenon, tell it to me. Maybe this one works

Format your SD card and try again (do a full format, not the default quick one), maybe that'll solve it.

Does not help, sorry
EDIT: For anyone, who wants to know...i finally solved the problem.
I mean, I am so happy, I could cry
And everything because of the user ,,shekerdothis''. He is just a god. He saved my life
So, he said in another post:
I had the same issue for about a day, and after research of stuck on green HTC Logo with no help, and thousands of post later I came acroos an article regarding EncFiltLog.menc. Do not format your SD card with MAC or windows PC, but rather the secret is to format your SD card with your winmo phone by going to "settings" | "format SD card". It will create an exec file "EncFiltLog.menc" This file is, I guess, a partition index??? The file "EncFiltLog.menc" is hidden in windows mobile 6.x but is visible when you mount your SD card to your PC. Do not delete this file!!!!
After that just drop your android folder and it will boot up in less than 3 mins. After that, u may add all your other files. I use a 16GB card with Android and all my music and stuff with no problems. Hope this helps you.
Click to expand...
Click to collapse
And yeah, it worked. I went to settings in Winmo, then to System and then format SD Card. It took 1 Second (even faster then the quick Format on my PC) and everything works brilliant!
Thanks to you all, what a great Forum

Reltih2200 said:
Does not help, sorry
EDIT: For anyone, who wants to know...i finally solved the problem.
I mean, I am so happy, I could cry
And everything because of the user ,,shekerdothis''. He is just a god. He saved my life
So, he said in another post:
And yeah, it worked. I went to settings in Winmo, then to System and then format SD Card. It took 1 Second (even faster then the quick Format on my PC) and everything works brilliant!
Thanks to you all, what a great Forum
Click to expand...
Click to collapse
Am I missing something? I don't have a Format SD Card option under Settings on WM

Ok soooo only hyper droid works and other build dont
well play around with the kernel in Hyperdroid and mess with the data IMG ,
voila
then even hyper droid wont work,,,,,
Sorry mate , just kidding,
your issue seems to be with startup txt,
best regds

xnifex said:
Am I missing something? I don't have a Format SD Card option under Settings on WM
Click to expand...
Click to collapse
I don't know!? I have the newest energy rom and on basic Windows Mobile 6.5, you also can find this option. Use the newest energy rom, go to Settings and then to system. There you can find KeyLock-Settings,Device Information,Format SD-Card,Remove Programs,Memory,Screen,External GPS,aGPS Settings,G-Sensor, Certificates, About,Uploader,Wipe,Power etc.
Ok soooo only hyper droid works and other build dont
well play around with the kernel in Hyperdroid and mess with the data IMG ,
voila
then even hyper droid wont work,,,,,
Sorry mate , just kidding,
your issue seems to be with startup txt,
best regds
Click to expand...
Click to collapse
Yeah, as I said, it has nothing to do with the startup.txt. I solved the problem with the method, explained in another Thread. Now I tried 11 Builds (MDJ has the best ) and everyone works.
It's a mistery to me, why hyperdroid worked without to format the sd card via winmo, but who cares? Everything works fine, and thats awesome )

Stuck on HTC Loading screen

So ive been going through a few different SD builds for my HTC HD2. and all of a sudden the last 3 dont load past the HTC loading screen. right now im trying to get the newest MCCM GB sense build i think its 1.8 going. but they all freeze. some people said it takes about 20 mins to get up and running, but i wait 30-60 mins and it stays there. Maybe i deleted a folder that allows it to boot up properly? help please!

bump for help

Please help!

Did you add the relevant directory and boot type to the "set cmdline=" line of startup.txt?

Considering i have no idea what that is. probably not. but ive never added that before and ive always been able to boot android up on the first try.

Heres a basic play b play
I load up my phone (WM)
i go to my file explorer, sd card, and android. i do my sound (clrclad or w/e) and then run Haret.exe. it starts up, black screen says booting from kernel, and it goes to HTC logo. and stays there.

If you have copied the ROM to SD in a folder called "Android" to boot from SD then you would add "rel_path=Android nand_boot=0" in quotes to the line "set cmd_line=" in startup.txt in the Android directory.

Yeah... its already in there....

Got the same problem today! Tried several different SD builds with no luck. Now on darkstone SuperRAM FroYo v1.5 it restarts the phone after the green logo...
It might be a bat sd card format or maybe because i tried to do a task29 several times without success

Got it working
Flash a normal HSPL - 2.08 and unplug from USB while performing first HARET start!