Related
Hi,
I've got an M3100 flashed to the SA Tytn ROM and after recently it seems to have had problems staying on a network. When I start it up it finds the network and connects for a while but then looses it (the exclamation mark next to the signal indicator) and refuses to find it again. The only way to get it to connect is to go into phone settings and tell it to refresh the network.
Any ideas as to what could be causing this?
Many thanks!
I was having a similar problem with my new Jasjam (HT 647xxx).
The factory installed ROM had a radio version 1.21.31.10 and the rom date was 8th september 2006.
Quite strangely the latest ROM available on the i-mate site is dated 21st July 2006 and has a radio version 1.07.03.10.
Since I have downgraded to the ROM available on the i-mate site it seems my problems are over. Maybe the ROM you have installed has a faulty radio rom.
Regards
Well I've got 1.18.00.10 as my radio version and I've had it for a while without any problems.
Just a couple of very routine things to be sure of (perhaps before going into Radio versions etc)
1. That the device is set to best performance not best battery under the network settings
2. The range is not great for wifi 10-15 metres at best so just to be sure your in good range. I know when I'm on the periphery of signal it connects fine but drops signal fairly often.
Cheers
Mike
Sorry, I should have made it clear that the problem is with the cellular network.
Sorry to bump this, but has anyone got any ideas? A full reflash of the device doesn't seem to have done anything so I'm beginning to worry that this is a hardware problem...
I am using a 7500 in London England and WM 6 (though it was the same under WM5). It is also the same if I switch a SIM from O2 to 3.
When I come from a place of zero GSM or 3G signal, such as leaving the underground train and coming to the surface, the phone refuses to pick up any signal again. This has never happened with other WM phones I have had - I also use the TyTN II for example, which is just fine.
I can wait for hours, but it refuses to locate another signal. I have to shut down the phone, then start it up again. In fact, there is plenty of signal.
It is starting to get annoying.
Anyone with experience of this? Any solutions?
thanks
rjstep3
What Radio do you have installed
There are links to radio 1.57 and 1.58 on the following page which seem to have improved phone reception and battery life
http://forum.xda-developers.com/forumdisplay.php?f=353
Remember to back up your files as this resets the rom
thanks for that. I have radio 1.50 at the moment so I'll see if this improves things.
rjstep3
since i had updated to the new radio my signal been dropping randomly out of no where then comes back.. i had about 20 drop calls since i had flashed to the new radio from haykuro blog and the magic spl. and then i had use JF adp1.5 and that when my E and bars stop dropping.. anyone out there know whats the problem? or is it just t-mobile towers
same thing happened to me. not sure what the issue was but i re-downloaded the radio file from htc, updated the pone and things were back to normal.....actually better.
after the update my signal strength improved. in areas i normally only get E coverage, i now get 3G. in areas i had marginal 3g coverage i now get more bars, etc
aiight cool, cause i was having the same exact issue...so I'm going to reapply the latest radio update...thanks guys.
aagvain said:
same thing happened to me. not sure what the issue was but i re-downloaded the radio file from htc, updated the pone and things were back to normal.....actually better.
after the update my signal strength improved. in areas i normally only get E coverage, i now get 3G. in areas i had marginal 3g coverage i now get more bars, etc
Click to expand...
Click to collapse
Same here.So happy.
I was wondering where I can get the update for this?
I have had huge problems with the 1.5 radio for the Dream (2_22_19_26I) ever since upgrading. I even tried to reinstall the radio, to no avail. I still kept losing wifi every x minutes even though the status icon reported a strong signal, and the only way to get it to work again was to restart wifi manually. I also lost positioning via the 3G/GSM network after xx hours, and the only solution was to reboot the phone.
Anyways, I decided to revert back to the 1.1 radio, 1_22_14_11, which seems to have fixed these issues.
where can i get that old radio download?
HELP!!! updated radio now phone get no service!!!
i updated to the new radio just like everyone else then my phone starts dropping my data connection...NOW i reverted back to the 1.1 radio that i downloaded from htc and i still get no service!!! HELP!!!
redragoonz said:
i updated to the new radio just like everyone else then my phone starts dropping my data connection...NOW i reverted back to the 1.1 radio that i downloaded from htc and i still get no service!!! HELP!!!
Click to expand...
Click to collapse
Call T-mobile and ask them to check the towers around you.
mannyb said:
I have had huge problems with the 1.5 radio for the Dream (2_22_19_26I) ever since upgrading. I even tried to reinstall the radio, to no avail. I still kept losing wifi every x minutes even though the status icon reported a strong signal, and the only way to get it to work again was to restart wifi manually. I also lost positioning via the 3G/GSM network after xx hours, and the only solution was to reboot the phone.
Anyways, I decided to revert back to the 1.1 radio, 1_22_14_11, which seems to have fixed these issues.
Click to expand...
Click to collapse
Update:
Ok, so the old radio did not fix the problems, which means this is either an issue with Android 1.5/JFv1.50 or I have one or several apps installed that is causing this. A possible third option would be a funky SD card.
I'm with T-Mobile and the signal for my hd2 is solid on winmo, but when I boot android my phone signal fluctuates. It goes from 5 bars to 2 bars to none then back to 5 bars again and the cycle continues. I've tried several roms and radio changes as well as android built but that does not seem to fix the problem.
Does anyone know a way to fix this?
As of right now, I'm using Chucky with 2.12 radio and my favorite build Froyostone V2.
Mine does the same with froyostone v2 as well. Im running 2.08.50 radio. Frustrating!
geekyhawkes said:
Mine does the same with froyostone v2 as well. Im running 2.08.50 radio. Frustrating!
Click to expand...
Click to collapse
Are you with T-mobile as well? Do you experience this on other builts?
Sent from my HTC Desire using XDA App
Yep, have the same issue on Bangsters 1.3 build :\
T-Mobile, 2.12.50 radio
same issue with o2 and Radio 2.10 tested with HyperDroid and Bangsters
I'm T-Mobile and my signal is different depending on where I am at! But if I find the sweet spot it stays dead on.
Sent from my HTC HD2 using XDA App
Same issue. with radio ver. 2.12.50.02_2.
Signal seems solid on WinMo but on Android Bangsters 1.3a it jumps sometimes to Edge insted of Hsdpa. it depends on where I am. Conn-type-RMNET - PPP does not work for me.
The bottom line the signal is beter on WinMo. Hope this will be solved on next build.
I concur... I just recently started using Android on my T-Mobile HD2 and can relate that the signal quality as well as data connection is sketchy at best. One second I'll have a full signal and the next I have none. Then once the signal comes back, any and all data services also don't work.
Using Darkstone V2 and Radio 2.12.50.2
Exactly the same for me which is a shame because its the only problem left I'm having. The signal is there and its strong then it disappears and just keeps running that cycle all the time.
O2 stock 172 Rom
Radio 2.12.50.2
Sent from my HanDroid2 using XDA App
Same here
Shubcraft 1.5 radio 2.11. sometimes it shows no signal, how ever i dont know if it is just the software or actually the phone does not have signal.
Same on froyostone + 2.12 radio.
changed to mdeejay Froyo Sense + 2.11 radio
no more "no signal every 2 min, gonna smash my phone on the floor" for me.
2wice said:
changed to mdeejay Froyo Sense + 2.11 radio
no more "no signal every 2 min, gonna smash my phone on the floor" for me.
Click to expand...
Click to collapse
Let me test mdeejay's build, let's see if its better.
I have had the same problem, so i downloaded the "mdeejay_froyo_sense_v1.5_NOAXI " build, copied "rootfs.img" to my Andrid folder, restarted, and now it seems to not loose the signal at all. Full / almost full signal all the time.
I also tried to use "zImage" from the mdeejay-build. It also worked, but WiFi would not start at all. Just said "Fail", so i switched back
Not sure if this works for everyone, but it sure is worth a try...
QuaQuaRaQuaQua said:
I have had the same problem, so i downloaded the "mdeejay_froyo_sense_v1.5_NOAXI " build, copied "rootfs.img" to my Andrid folder, restarted, and now it seems to not loose the signal at all. Full / almost full signal all the time.
I also tried to use "zImage" from the mdeejay-build. It also worked, but WiFi would not start at all. Just said "Fail", so i switched back
Not sure if this works for everyone, but it sure is worth a try...
Click to expand...
Click to collapse
in settings under phone/cell standby what percent do you have without a signal? Mine is usually really high 50-80%. I've been able to pull 32 hrs out of a single charge when its on the lower end.
QuaQuaRaQuaQua said:
I have had the same problem, so i downloaded the "mdeejay_froyo_sense_v1.5_NOAXI " build, copied "rootfs.img" to my Andrid folder, restarted, and now it seems to not loose the signal at all. Full / almost full signal all the time.
I also tried to use "zImage" from the mdeejay-build. It also worked, but WiFi would not start at all. Just said "Fail", so i switched back
Not sure if this works for everyone, but it sure is worth a try...
Click to expand...
Click to collapse
Whenever you switch your zImage you have to also change your bcm4329 module, if not Wifi will not work.
I think we really need an exploration in radios in general. Pick a random set of builds and everyone switch out radios to see how connection goes. I live in a city that has the HSPA+ from T-Mobile and there are times I can't get voice to work on Miri 6.5/Bangers 1.3/2.12 (the latest) radio.
I am using chuckydriod with radio 2.12 and android build hyperdriod 1.2 using latest michyprima R11 kernal with axi scaling.
I have excellent radio performance in the following modes.
GSM only
Wcdma only
Dual mode rarely switches to GSM even when wcdma is dropping data connections in high GSM signal areas wich is a bug in my opinion.
Sent from my HTC HD2 using XDA App
Pure gold
Downloaded the Desire HD beta2 Android and i use the "rootfs" from that build...
Have not had any "zero-drops" at all, and i have signal in some bad areas where i had nothing before...
facing this problem too
using hyperdroid 1.5 and 2.12.50.02
I upgrade my radio to the newest one 2.14 on meedj's evo sense warm 1.0 thinking that it would help my phone signal, but it didn't help. Then i started messing around with my "network settings" and to my surprised it seemed to help. My cell signal still fluctuate but it never reaches "no bar".
Here's what I did:
Go to seetings, then wireless & network, mobile networks, network operators, then wait until you get 4 or 5 signal bars and click on "select automactically". I don't know what it does but it helps me and I hope it helps you too.
Note: you can also select "search network" and manually add your network in, it doesn't hurt trying. [/COLOR]
Let me know if this works for you.
Hey everyone. I've been having issues with my data connection and I'm trying to figure out what is causing it. I am using CM 6.1 RC2 and I have the updated radio from the vodafone rom.
For example, when I enter the market, about 50% of the time I get a network error after resuming from sleep and have to click retry once or twice before I can do anything. The data connection is just not reliable anymore (yet before this issue it always was).
I'm just wondering if there is an issue with RC2 of CM or if it is the radio update causing this. Can anyone comment?
I'm not sure this would be related, but after flashing 6.1.0 on my Dream I find it stuck in EDGE occasionally, usually when in the car or after, and in places where I get solid HSPA before 6.1.0. So far, I have to reboot to get HSPA (or 3G) back. There are some notes on updated radio and a kernel to address some radio problems, is anyone else seeing this?
Hi,
I have similar problem. My legend is not with the latest radio or kernel.
The specs are:
CyanogenMod Legend 6.1
Radio: 7.05.35.26
Kernel: 2.6.29.6
The problem that I see is: During the night when the phone is not used it looses the data connection. When I turn it on in the morning there are no mobile network indicators. I have to reset the network ( by airplane mode or reboot) ot get back my data connection.
During the day there are no problems.
I suspect that this happens because of the weak 3G signal in my area. However I use auto setting. ( 2G and 3G)
When I was with stock ROM I haven't such issues with dead data connection during long sleep.
EDIT: I have just upgraded the radio to 7.08.35.21. I will check how it works tonight.
BR
I'm having similar trouble with CM 6.1 released just a few days ago...
I've posted this to Cyanogen Stable Forum for Legend:
h t t p ://forum.cyanogenmod.com/topic/11966-cyanogen-61-htc-legend-problems-with-3g-connection/
I think I've similar problem as you...
I have updated the radio to 7.08.35.21.
This morning when I woke up I saw no data connection again The signal strength indicator was full with bars!
Anyone has any clue?
I've been having some data issues too, I've had to go to and from Flight Mode in order to get any form of connection (data OR telephone) back, and I occasionally get stuck on GPRS. Toggling "use only 2G networks", waiting for the data to come back and then toggling it off again gets EDGE or H back, but it's pretty flaky compared to RC1 and the older radio.
I think i have the same or similar problem.
It looks like I have a data connection (3g is showing and signal strength is almost full). But when i try to connect to facebook, browser or somthing else what needs a connection it cant connect.
I have a taskkiller running when i kill all the task 90% of the time i will get a connection.
I have the same programs on my phone when i used 2.1 and with 2.1 I never had this problem.
Strangely enough it seems like mine is working much better lately. Maybe there was something up with Bell. I haven't gotten the connection error in days.
After update to radio 7.13.35.05 I haven't had this sissue again.
I will continue to watch he behavior.