Database Users

1.20 Radio Rom takes long time to reregister on network after dropped off?

Hi all,
I'm currently experiencing a problem where my Softbank X01ht drops off the cellular network because I live in a low strength area, and takes forever, if at all, to automatically connect back to the network, even if I move into an area where I know the cellular strength is high.
If I manually turn off the phone portion of the hermes, and reconnect, then it happily detects the cellular network and connects. In other words, after disconnecting, it acts as though there is no network in range at all, even though I know there is.
This seems to have started after I upgraded my radio rom to version 1.20 from 1.07. Prior to the upgrade, I know it connected back to the network quite quickly after it dropped out. Has anyone else experienced this with the 1.20 Radio Rom? I currently have the Imate jasjam rom installed on my phone with the 1.04 bootloader.
Unsure if this is related, but the area that I live in has a weak UMTS network, but a relatively decent GPRS network. I'm thinking the phone is getting confused over which network to connect too.
It also seems that if I'm in an area with a pretty strong cellular strength, it doesn't drop out? Would I benefit from downgrading to the 1.16 Radio Rom?
Thanks in advance all.
Gene

I can also confirm that things added with that after a soft reset sometime it cant detect network..i have to manualy turn off/on the radio part....generelly it occures if i reset the set just after making a call or just getting disconnected from edge...
the previous 2 radio that i used 1.16 and 1.08 didnt suffer from those probs...
but the main benifit of 1.20 radio that i get is EDGE speed i can pump upto 220Kb (22-24 KB) download speed in flat when connected to pc as wireless modem but with the previous radios i can barely go 160Kb and the speed did uped/down regularly...
and somewhat strange with this 1.20 radio i cant search for network list manually when even i go to manual in network after sometime i get cant read error...but previous radios where ok in that par too...
and the last benifeat that i get with 1.20 is now the SIM STK menu is working.....

sajib said:
I can also confirm that things added with that after a soft reset sometime it cant detect network..i have to manualy turn off/on the radio part....generelly it occures if i reset the set just after making a call or just getting disconnected from edge...
the previous 2 radio that i used 1.16 and 1.08 didnt suffer from those probs...
but the main benifit of 1.20 radio that i get is EDGE speed i can pump upto 220Kb (22-24 KB) download speed in flat when connected to pc as wireless modem but with the previous radios i can barely go 160Kb and the speed did uped/down regularly...
and somewhat strange with this 1.20 radio i cant search for network list manually when even i go to manual in network after sometime i get cant read error...but previous radios where ok in that par too...
and the last benifeat that i get with 1.20 is now the SIM STK menu is working.....
Click to expand...
Click to collapse
Thanks sajib,
Glad I'm not the only one experiencing it. For me, however, it only occurs when it looses connection to the cellular network. After every soft reset so far, it has connected to the cellular network automatically. To me it doesn't seem to even search for the network. That is, after loosing connection, it is resigned to the fact that it can't connect to a network, so doesn't even try, unless I force it too. I think I have seen it connect automatically once or twice, but either way, it takes at least 10-20 minutes, sometimes it never connects, and I force a manual reconnect by turning off the phone and turning it back on. So is this a known problem with the 1.20 Radio Rom?

Try this...
I had the same problem on my TyTn. Took forever to WiFi connect. Then I found this registry setting:
[HKLM\Comm\TIACXWLN1\Params]
"dot11ShortPreambleInvoked"=dword:00000001
Now my WiFi time-to-connect seems much faster.

software_samurai said:
I had the same problem on my TyTn. Took forever to WiFi connect. Then I found this registry setting:
[HKLM\Comm\TIACXWLN1\Params]
"dot11ShortPreambleInvoked"=dword:00000001
Now my WiFi time-to-connect seems much faster.
Click to expand...
Click to collapse
Hi!
Thanks for the advice, but mine isn't a Wifi problem, but a problem with connecting to the cellular network.
Or do you think that your connecting to the WiFi network and the cellular network are one in the same?

i am using the 1.20 radio as well, but cant say that i have had any of the said problems... i have the cingular 8525 and have used the 2 latest cingular roms, the aku2.3 and 2.6.. but i did have some of the same problems with i used cingulars 1.16 radio

shogunmark said:
i am using the 1.20 radio as well, but cant say that i have had any of the said problems... i have the cingular 8525 and have used the 2 latest cingular roms, the aku2.3 and 2.6.. but i did have some of the same problems with i used cingulars 1.16 radio
Click to expand...
Click to collapse
Do you commonly get cellular network disconnects? I find that if I'm moving around the city or driving around in the car, the network connection is maintained, and sometimes will automatically find the network if it does get disconnected. However, it is only when I am home that the phone disconnects and doesn't try to reconnect once it has been disconnected.
Any idea of what might have caused this issue with you with the 1.16 Radio Rom? Possibly something to do with the AKU version? I'm using AKU 2.3.
Thanks,
Gene

GeneNZ said:
Do you commonly get cellular network disconnects? I find that if I'm moving around the city or driving around in the car, the network connection is maintained, and sometimes will automatically find the network if it does get disconnected. However, it is only when I am home that the phone disconnects and doesn't try to reconnect once it has been disconnected.
Any idea of what might have caused this issue with you with the 1.16 Radio Rom? Possibly something to do with the AKU version? I'm using AKU 2.3.
Thanks,
Gene
Click to expand...
Click to collapse
I too have the original problem but have not upgraded the radio ROM. I have the T-Mobile Vario II (sorry not sure what ROM that is) but often when I move from an area of either very weak or no signal to an area with a signal (coming out of a shielded building) I too get the same problem. Initially the phone shows weak (or even strong) signal strength but when I try to make a call I get the box up on the phone screen telling me it cannot connect. I have found that eventually it will, when left to it's own devices, get itself sorted out and allow a connection. But it is invariably quicker turing off the phone (via comm manager) then back on - this always results in a valid connection.
Perhaps the problem that you describe is not related just to the 1.20 Radio ROM upgrade?

tony.wheeler said:
I too have the original problem but have not upgraded the radio ROM. I have the T-Mobile Vario II (sorry not sure what ROM that is) but often when I move from an area of either very weak or no signal to an area with a signal (coming out of a shielded building) I too get the same problem. Initially the phone shows weak (or even strong) signal strength but when I try to make a call I get the box up on the phone screen telling me it cannot connect. I have found that eventually it will, when left to it's own devices, get itself sorted out and allow a connection. But it is invariably quicker turing off the phone (via comm manager) then back on - this always results in a valid connection.
Perhaps the problem that you describe is not related just to the 1.20 Radio ROM upgrade?
Click to expand...
Click to collapse
Hi Tony,
It could possibly be an application or the ROM itself causing the problem, however, I think its the radio rom in my case, simply because this problem only started occuring after I upgraded to the 1.20 Radio Rom. Previously on the 1.07 Radio rom, the phone would connect automatically and immediately. Also I just performed a hard reset after I discovered this problem, and it still seems to be occurring...
I also am sure that after a long while the phone reconnects, I have seen it try reconnect a couple of times. But then again, a couple of times I've left it for 10-30 minutes, and it hasn't reconnected. Unsure of exactly how it chooses to reconnect and when it tries to reconnect. You would think it would try reconnect constantly after a specified period, but in my case it seems very random.

GeneNZ said:
Do you commonly get cellular network disconnects? I find that if I'm moving around the city or driving around in the car, the network connection is maintained, and sometimes will automatically find the network if it does get disconnected. However, it is only when I am home that the phone disconnects and doesn't try to reconnect once it has been disconnected.
Any idea of what might have caused this issue with you with the 1.16 Radio Rom? Possibly something to do with the AKU version? I'm using AKU 2.3.
Thanks,
Gene
Click to expand...
Click to collapse
i actually get pretty solid coverage whether moving or stationary. especially at home since i live not a quarter mile from a cingular tower and i dont think its necessarily related to the aku version since i have gotten the same result with either 2.3 or 2.6. But i can say for sure that the cingular 1.16 radio is junk my biggest complaint was gsm calls cutting out and on my calls on 3G had a very weird digitized background noise, kinda sounded like a bad digital echo... 1.20 fixed all of that for me

shogunmark said:
i actually get pretty solid coverage whether moving or stationary. especially at home since i live not a quarter mile from a cingular tower and i dont think its necessarily related to the aku version since i have gotten the same result with either 2.3 or 2.6. But i can say for sure that the cingular 1.16 radio is junk my biggest complaint was gsm calls cutting out and on my calls on 3G had a very weird digitized background noise, kinda sounded like a bad digital echo... 1.20 fixed all of that for me
Click to expand...
Click to collapse
When I'm roaming around my connection always seems to be sustained. e.g, I've been checking my phone ever 1hour for about 24 hours, and have yet to see my signal lost. Is it possible that the phone is getting confused over which band to connect to? As I said in my first post, I have a relatively weak 3G/UMTS signal from my home (1-2 bars), and a relatively strong GPRS signal (3-4 bars). Presumably the phone is UMTS-preferred, and uses GPRS as a secondary.
I saying this, even if I go to another area which usually has 5 bars UMTS signal, I haven't seen the phone immediately connect. This was after about 10-15minutes waiting in that area.
Gene

GeneNZ said:
When I'm roaming around my connection always seems to be sustained. e.g, I've been checking my phone ever 1hour for about 24 hours, and have yet to see my signal lost. Is it possible that the phone is getting confused over which band to connect to? As I said in my first post, I have a relatively weak 3G/UMTS signal from my home (1-2 bars), and a relatively strong GPRS signal (3-4 bars). Presumably the phone is UMTS-preferred, and uses GPRS as a secondary.
I saying this, even if I go to another area which usually has 5 bars UMTS signal, I haven't seen the phone immediately connect. This was after about 10-15minutes waiting in that area.
Gene
Click to expand...
Click to collapse
yes, the phone is set to prefer the UMTS bands.. have you tried setting the band manually instead of it letting it autosearch? you can do it in the phone settings menu or use the app listed here: http://forum.xda-developers.com/showthread.php?t=286844

Is it just me or is anyone eles having a signal problem? in jfadp1.5

since i had updated to the new radio my signal been dropping randomly out of no where then comes back.. i had about 20 drop calls since i had flashed to the new radio from haykuro blog and the magic spl. and then i had use JF adp1.5 and that when my E and bars stop dropping.. anyone out there know whats the problem? or is it just t-mobile towers

same thing happened to me. not sure what the issue was but i re-downloaded the radio file from htc, updated the pone and things were back to normal.....actually better.
after the update my signal strength improved. in areas i normally only get E coverage, i now get 3G. in areas i had marginal 3g coverage i now get more bars, etc

aiight cool, cause i was having the same exact issue...so I'm going to reapply the latest radio update...thanks guys.

aagvain said:
same thing happened to me. not sure what the issue was but i re-downloaded the radio file from htc, updated the pone and things were back to normal.....actually better.
after the update my signal strength improved. in areas i normally only get E coverage, i now get 3G. in areas i had marginal 3g coverage i now get more bars, etc
Click to expand...
Click to collapse
Same here.So happy.

I was wondering where I can get the update for this?

I have had huge problems with the 1.5 radio for the Dream (2_22_19_26I) ever since upgrading. I even tried to reinstall the radio, to no avail. I still kept losing wifi every x minutes even though the status icon reported a strong signal, and the only way to get it to work again was to restart wifi manually. I also lost positioning via the 3G/GSM network after xx hours, and the only solution was to reboot the phone.
Anyways, I decided to revert back to the 1.1 radio, 1_22_14_11, which seems to have fixed these issues.

where can i get that old radio download?

HELP!!! updated radio now phone get no service!!!
i updated to the new radio just like everyone else then my phone starts dropping my data connection...NOW i reverted back to the 1.1 radio that i downloaded from htc and i still get no service!!! HELP!!!

redragoonz said:
i updated to the new radio just like everyone else then my phone starts dropping my data connection...NOW i reverted back to the 1.1 radio that i downloaded from htc and i still get no service!!! HELP!!!
Click to expand...
Click to collapse
Call T-mobile and ask them to check the towers around you.

mannyb said:
I have had huge problems with the 1.5 radio for the Dream (2_22_19_26I) ever since upgrading. I even tried to reinstall the radio, to no avail. I still kept losing wifi every x minutes even though the status icon reported a strong signal, and the only way to get it to work again was to restart wifi manually. I also lost positioning via the 3G/GSM network after xx hours, and the only solution was to reboot the phone.
Anyways, I decided to revert back to the 1.1 radio, 1_22_14_11, which seems to have fixed these issues.
Click to expand...
Click to collapse
Update:
Ok, so the old radio did not fix the problems, which means this is either an issue with Android 1.5/JFv1.50 or I have one or several apps installed that is causing this. A possible third option would be a funky SD card.

GSM connection problem

I am only writing here after I tried everything I could possibly imagine with no result. Sorry the long text.
I'd like to hear ideas from you. Anyone with a similar problem.
I have a Blackstone, and never had even the smallest problem with GSM signal. But now I face the following:
- If I set the Band to "Auto", my phone connects to the HSPDA network with no problem, and I use internet and make calls normally.
- If I set the band to "GSM", sometimes it connect, sometimes not. When I manage to connect, if I try to use the internet, sometimes I lose the signal. When I am making a call, it frequently hangs up. The problem is random, sometimes I can use GSM with internet and calls for a long time, but suddenly it crashes again!
The solution would be always connect to HSPDA, but the problem is that on "Auto" the phone sometimes goes to GSM alone, and the signal breaks down.
I cannot be sure exactly when this problem began. But it was after I installed PDAVIET's Rom (WM 6.5 21053 and manila 2.5), and radio 1.17.25.09.
Among everything I have done:
- Flashed dozens of Roms always hard-reseting twice after. Tried stock Roms, cooked Roms with WM 6.1 / 6.5, manila 1.3 / 2.1 / 2.5.
- Flashed radios 1.13 / 1.14 and 1.17 in combination with all Roms. Tried with and without ripphone.dll's
- To eliminate a operator problem, I used my chip on a nokia for a few days, and didn'd have a single problem with signal, calls, internet. I installed a chip from another operator and faced the same problem.
Nothing I have done made any result.
Even using my stock Rom didn't solved. I used this phone for 8 months with no problem. So I came to the conclusion this is hardware related, with the antenna or something.
Thanks

All right, have been through a few more Roms and Radios and the problem remains unchanged...
Really looks like an antenna related problem. Apparently I will never connect to GSM again unless I take my device to service (have no guarantee), and be lucky!
But anyway, I found a solution to the connection instability and phone calls interruptions. Solved my life for now. It is very complicated:
*********************
HKLM\Software\OEM\UMTS
OpMode=2
*********************
This forces the phone to always stay in the 3G band. The "Auto" mode you can set in Comm Manager lets the phone change to GSM when the signal is low or whenever he wants, and my connection breaks down.
BTW, other modes are:
OpMode=0 (Auto mode)
OpMode=1 (GSM only mode)
OpMode=2 (3G only mode)
I know this may not be useful for anyone, but I just felt like sharing...

HTC MyTouch 3G - Cyanogen ROM no longer has data connection

I've unlocked a T-Mobile MyTouch 3G (32B) for AT&T. I rooted my phone yesterday purely out of spirit for experimentation. I've installed CyanogenMod-4.2.8.1, found on the website. I'm trying to connect to the market, but no type of data connection is being made.
The unusual part is that I have full signal strength. E or G sometimes pops on, but then drops off. I've quadruple-checked the APN settings, and they're fine. However, I did notice at one point the password had been deleted. I am aware that my phone version is not able to get on 3G band (although I'd like to find a hardware mod~)
I'm almost certain it's the Cyanogen ROM simply because before rooting, I had no data problems. Seems even a WiFi connection won't give me data. I've searched the internet to see if anyone else has had this problem, but it doesn't seem so. Any ideas?
Disabled WiFi and I have data. Apparently the two don't get along well. Just noticed an update to the ROM, so we shall see what will happen!
Or, if anyone has any suggestions on an alternative ROM, I'm not looking for anything too fancy (the MyTouch is serving as pure novelty at the moment; HTC Fuze is my primary phone). Speed and battery optimizations are most prefered, bluetooth/USB tethering a plus, and if it runs aHome or Home++ without a hitch, I'd be content.

I just upgraded to CM 4.2.9.1 on my MT3G 32B and am having data issues. Could it be a coincidence? Could it be T-Mobile upgrading to HPSA? Or could it be CM?

It's possible to be the ROM, as I'm on the AT&T network. I'll give the updated ROM a test as soon as I get some time to it.

Try reflashing radio. http://developer.htc.com/google-io-device.html

Works fine on my 32B Magic. Tried running fix_permissions, wiping and reflashing?

Got the same problem on my G1 with 4.2.9.1
When Wifi is active, after about 10 minutes i have no data connection anymore.
If i disable wifi i don't get this problem

i too have had this problem on my three magic 32a. i rebooted this morning and it went back to normal though. have only seen it once so i can't really comment on the cause. typically i have wifi always on and location by networks off...

How did you install CM?
Did you install the HTC 1.6 rooted base first, then the CM image after without re-booting?
You have to the first time you install CM. You don't say whether you did or didn't.

Did you remember to configure the APN correctly???

maybe related to instal issue?
I have the same issue but did "install the HTC 1.6 rooted base first, then the CM image after without re-booting". However upon booting into Cyanogen, I couldn't get past the "touch the android" screen and thus had to boot back into recovery mode and clear all data. After reboot I was able to pass the touch the android screen, but perhaps that wiped the 1.6 base settings?
Do I need to re-install, what if i have the same problem with getting past touching the android again?
I haven't tried updating the radio, but will try that first.

mobile network data
Found it: looks like toggle for mobile network data is turning it self off. Other than to conserve battery / airplane mode is there ever a reason to have it off? (is it bad to have on with WiFi?)
thanks.

Hiyoto said:
I've unlocked a T-Mobile MyTouch 3G (32B) for AT&T. I rooted my phone yesterday purely out of spirit for experimentation. I've installed CyanogenMod-4.2.8.1, found on the website. I'm trying to connect to the market, but no type of data connection is being made.
The unusual part is that I have full signal strength. E or G sometimes pops on, but then drops off. I've quadruple-checked the APN settings, and they're fine. However, I did notice at one point the password had been deleted. I am aware that my phone version is not able to get on 3G band (although I'd like to find a hardware mod~)
I'm almost certain it's the Cyanogen ROM simply because before rooting, I had no data problems. Seems even a WiFi connection won't give me data. I've searched the internet to see if anyone else has had this problem, but it doesn't seem so. Any ideas?
Or, if anyone has any suggestions on an alternative ROM, I'm not looking for anything too fancy (the MyTouch is serving as pure novelty at the moment; HTC Fuze is my primary phone). Speed and battery optimizations are most prefered, bluetooth/USB tethering a plus, and if it runs aHome or Home++ without a hitch, I'd be content.
Thanks for your time.
Click to expand...
Click to collapse
how can you unlock that
or that unlocked by rooting
i have htc sapphire unlock sim
how can i unlock that

This thread is from December. You Gus are not going to get much help on an outdated thread. You will have better luck on a newer thread
Sent from my Biff Plain Magic using Tapatalk

Moved to General (Q&A)

Should of stayed with t-mobile.

1.66 question.

Hi everyone.
Since upgrading to 1.66, I have noticed something rather annoying and hope someone can provide a solution to fixing it.
When I was on 1.48, the H icon at the top of the screen would always be there. I was effectively connected to the internet all the time, and was able to leave MSN messenger etc open and I'd always be online.
When I upgraded to 1.66, the icon at the top of the screen is always 3G. It only changes to H when I'm actually using the internet. If I open the browser and check out a website, the 3G changes to H and the website begins to load. It changes back to 3G when any internet connectivity is idle.
I can only access the internet when H is displayed, but I want it connected permanently like it was on 1.48.
It's like the phone is disconnecting from the internet when I'm not using the browser. It's not very useful when I need to keep MSN messenger open all day.
Thanks.

It's not disconnected when it says 3G. It simply switches to the slower mode when nothing is being transferred to save resources. As soon as something actually needs to be transferred it goes to H again to get the fastest available speed.

kilrah said:
It's not disconnected when it says 3G. It simply switches to the slower mode when nothing is being transferred to save resources. As soon as something actually needs to be transferred it goes to H again to get the fastest available speed.
Click to expand...
Click to collapse
Ah, okay. I can't seem to visit any websites when 3G is displayed though. Perhaps that could be to do with my operator settings or something?

i have had the same problem since installing the sms patches.... i have since hard reset to remove the patch... and testing it now... it is very anoying because it keeps my msn disconnected...

I'm using Dutty's 1.5 (it's a great ROM!) with a 2.07 radio and I've got the same problem..
When it says 3G, nothing seems to come through.. when it changes to H, the webpage starts loading...
Does anyone have a fix to make it not switch back and forth between H and 3G? It gets frustrating because it often takes 1 or 2 seconds to switch between the modes....

tsttse said:
i have had the same problem since installing the sms patches.... i have since hard reset to remove the patch... and testing it now... it is very anoying because it keeps my msn disconnected...
Click to expand...
Click to collapse
Let us know how to you get on because I need this fixed.

My MSN stays connected fine in 3G. Push email works perfect too.

The icons only show the available type of signal.
They don't mean you are connected.
When you do connect by opening an app that uses the appropriate signal then the icon changes to show the signal that you are connected with.
If H is not available in a particular area then it will stay on 3G and if that's not available then G with show.

Hey guys. I'm on my 4th HD2 handset now since upgrading my vodafone contract one month ago. First two handsets had similar probs as allot of you have had, i.e sms not working, alarm not working etc etc. I upgraded to the 1.66 rom when i got my 3rd handset from phones4u. I then started getting the same issues as you just described- internet only profficiently working when H coverage is active. When it goes below that then nothing happens at all. I returned the handset today and got a new one. This one already had the 1.66 Rom update installed and sure enough, had the same internet issues. I started fiddling with settings and changed the band setting from 'auto' to 'WCDMA'. ( just trial and error, so senior members please chime in if i have given bad advise!) This seems to keep the network coverage constantly in H and since changing it several hours ago i have not had any issues.
Start> Settings>Wireless controls>Phone>Band> Change Auto to WCDMA
Give it a go!

Tristan29 said:
I started fiddling with settings and changed the band setting from 'auto' to 'WCDMA'. ( just trial and error, so senior members please chime in if i have given bad advise!) This seems to keep the network coverage constantly in H and since changing it several hours ago i have not had any issues.
Start> Settings>Wireless controls>Phone>Band> Change Auto to WCDMA
Give it a go!
Click to expand...
Click to collapse
Wouldnt that make the phone stick to the 3G/HSDPA/WCDMA band only and cause the phone to have no reception around certain areas that still operate on 2G GSM?

Exact.
I rather tend to do the opposite for that reason if I have trouble (sometimes you're in areas where 3G reception is low and it keeps switching between 3G and EDGE all the time), I'll force EDGE only. It's slower, but at least the connection is constant.

When at work mine fights bewteen 3g and h and both are like 1 bar signals, i'd rather disable both when at work as G is full signal.
Is there a way?