Hello everyone!
Is one rw6815 my mobile phone, That trouble that I put it on him PDAVIET WM 6.1 1.05b-rom, and since then the Wifi-t it is not possible to switch it on, I rehearsed it then Akilis ROM, 6.5 one, but Wifi does not start up with one. Then the DSUU, I tried to place it back onto him the WM5-five but does not allow it to refresh, into a device manager there he is that HP USB Sync, but when I am spent on him that a upgrade disappears from there then, juice issues it with a sick-note that Connection Error, on the other hand if I am spent on it that OS+MOT then the Radio-t refreshes it, the WM no.
The machine the boot reaches the stage of a screen longer currently i can't. Pdaviet WM 6.0 Prof, 1.05b-vel starts yet but Wifi no..only starts with this. BL there are 1.05 go ahead. I would like to ask it that from where I would know it to it the original one ExtendedRom and original Radio( Wifi) firmware-t to download, that let everything be original in a state? Greet, and excuse me my writing but I do not can properly in English, I write about a Hungarian country. Thanks
Related
Hi guys
I'm using an orange switzerland branded m5000, and I use buzz's unlocker yesterday to remove the SIM Lock on it. Appears top have worked fine, as I can use my wifes SIM card in it now(different provider).
However, I'm now trying to flash AKU 3.2 (Ivan's version) to my device. I let it connect to my PC with activesync, then start the RUU.exe. The screen that shows me the current versions, and what I'm upgrading to appears, and I click next. Then the small window with "gathering information from device" appears, and stays there. After about 30 seconds, my m5000 spontaneously reboots. Consequently, after another minute or two, I get a 101 connection error from the RUU.exe.
What am I doing wrong here?
Besides: My device currently (post-unlocking) claims to be running Radio V. 0.00.00, and the AKU3.2 upgarde screen claims it will only upgrade the CE Version, is this right? Am I now forever stuck of Radio V 0?
It worked now, please ignore
Ok, it worked. I dl'ed and flashed the 3.2 JasJar Rom first, and then Ivans beta14 worked. It's really quite a noticeable speed up. Thanks to everyone who spent their precious time developing these things.
Now all I have to do is get my providers MMS and GPRS and 3G settings back to normal.
Hello Guys
I have a problem.
I have a Qtek 8100 (with the music buttons). I should downgrade it back to Windows Mobile 2003 SE. The first problem is, that i can't find any official rom.
Then the second problem is, that all other cooked roms like wm5 or wm6 roms don't work at all. So the device starts up, but then i can't do anything, not even go to the menu.
And this problem goes into the next problem. I can't establish a connection with active sync... I don't know, but it doesen't try to connect.
But I can tell you what is working:
I can update the phone to wm5 or wm6 with the mtty 1.42, but then the roms don't work.
First: Does anybody have the official qtek 8100 rom or does know where to get it?
Second: Why can I not connect with active sync?
Please I need your help!
Thank you!
I face a strange problem on my dopod 818pro after I donwgrade from wm6.5 back to wm5 NVID rom.It take about 5 minuets to boot back to the windows,even thought i did several time of hard reset it is d same too. Does anyone encounter with this kind of problem before? Please advice.
No sifus can HELP???
Finally I solved d problem liao by upgrading back to wm6.5 Build 23053 WWE bikertibi edition.
Help <urgently needed
Hi everyone,
I tried to upgrade my HTC universal from WM 5 to WM 6.5 using the rom provided by xda v1.01 (128MB rom).
I tried to install the upgrade from my laptop but during the process i noticed a sound indicating that the USB connection was lost. Now all i can see in my phone is 'Serial' at the top and 'v1.01' at the top. Aside that, the phone's literally DEAD.
Is there anything I can do about the phone or is it wasted?
Would appreciate any form of response.
Thanks.
Dear All
I have upgrade the atom with the atom rom WM6.5 21500. The rom was successfully upgraded but i don't like it. And when i tried to downgrade it to WM6.1, it didn't work. I have tried to enter bootloader but i can't, when the atom restart, they will not boot and restarting again and again. .
Please help in this matter..
thanks.
Hello
For me ist is the same Problem:
i managed to update to WM6.5 but wanted to go back to the original WM6
and now i tried different Memorycards and only got a "clean boot" of the WM6.5 (not for one time the Point were it tries to update the Rom)
The Reason to change to 6.5:
i had Problems with my E-Plus Sim > it runs for about 1 or 2 Weeks and than lost Connection an on Restart it doesn´t find the Simcard ...
Reason to change back:
with 6.5 it got the same strang behavior.
the 6.5 is in english Language and i am German and so i wanted to go back to the original Rom
With both Rom´s i used a Prepaid Simcard from Congster for testing and with this Sim the Phone had no Problem. So i dont think the Phone has an hardwareerror > just seems to dislike my E-plus Simcard ...
So i will return to my Question:
has the Way to reach the Bootloader changed with the WM6.5?
Is there a different Way to return to my old Rom?
I hope someone can help
well my phone after i flashed and installed wm 6.5 it was working totally fine, but this morning i turned it off and then on and it totally freezes at the startup screen and never loads windows. what i can do?
i'll appreciate any comments
i have then same problem switches on displays, disigned for windows mobile 6.5.5 then freezes
Yeah many ppl has this issue... be sure to flash first the att stripped att stock rom then hard reset then boots then reflash the custom rom then hardreset then try again to use th rom maybe it works ok now
I have the same problem
but I have the same problem. I bought a second hand phone and also freezes on the welcome screen and to make the rom? I need it so I can re-flash the windows
I have problem with my tytn, i was traying 7-8 rom of win mobile 6.1 or 6.5 but no help, my htrc cant find nework or when he find network he was online 1 hour and after hat he he offline in phpne mode, what is a problem, radio, rom or... ????
miljan017 said:
I have problem with my tytn, i was traying 7-8 rom of win mobile 6.1 or 6.5 but no help, my htrc cant find nework or when he find network he was online 1 hour and after hat he he offline in phpne mode, what is a problem, radio, rom or... ????
Click to expand...
Click to collapse
try to upgrade radio version on your device !! you can find Radio Rom Wizard in http://forum.xda-developers.com/showthread.php?t=300713 or at http://forum.xda-developers.com/showthread.php?t=268031
i cant start update proces always error 260 or 262
Jasjam Freez on i-mate logo
Dear Friends
my jasjam stop on first screen(i-mate Logo) . I did soft and hard reset again and again but nothing!i remove battery and sim card along the night but nothing again.pls help me what's problem
Thnkas and goodluck
Batman1351 said:
Dear Friends
my jasjam stop on first screen(i-mate Logo) . I did soft and hard reset again and again but nothing!i remove battery and sim card along the night but nothing again.pls help me what's problem
Thnkas and goodluck
Click to expand...
Click to collapse
probably you need reflash again your device with Original Shipped ROM
JasJam Freez on Logo
Dear Rahman
sorry for my bad english.Thank u for ur reply.jasjam freez on the first page!it mean i can not connect it to PC via active sync because it no load to windows!PC can not detect device!so how can i fix this problem without a PC connection ?