Deer friends,
I need your help.
last weehk I changes my operator in israel from ornage to pelephone.
The hermes does not recognise the new operator network, and i cano not use the phone.
I tried several roms including shaps 4.31. manila and some others.
Yet, i can not use the phone. It does not find any available network.
pelephone network is a UMTS network ( as far as I know).
it is obvious that my hermes is sim unloacked.
Pleas any one familiar with pelephone network and hermes setting,
I need help
regards
radio upgrade
Hello friend
try going to phone>menu>options>band>them switch the band to the hrtz that your new carrier operates
if it dosen´t work try to upgrade you rom , for radio upgrade guide go to xdawiki on the main xda page
running 6.1 my provider is at&t in usa my phone will only go on cingular is there a cab file or rom so it will network on 31041? i've tryed manual but will not work.
thx dave cruz usa
Hello,
I was going to purchase a Telstra 9193 Australian version which has HESPA 850. My question is regarding flashing a custom rom. If I leave the radio stock and flash a rom will it work since it has a different frequency?
Anyone bought one for use with Telus or Bell or guess AT&T and flashed a custom rom? I have been reading about a setting for frequency?
Also do you know where I can get the stock Telstra rom so if i need to go back?
Thanks
I imagine it should work as long as the radio rom is intact, but I'm not positive and would also like to hear from somebody who has tried using the Australian Phone.
I would gladly buy another HD2 to get US 3G...not on T Mobile.
I have the Telstra HD2 it works with 3g in NA with flashed roms and also with upgraded radio ( currently I have the 2.8)
SnooPPP said:
I imagine it should work as long as the radio rom is intact, but I'm not positive and would also like to hear from somebody who has tried using the Australian Phone.
I would gladly buy another HD2 to get US 3G...not on T Mobile.
Click to expand...
Click to collapse
The Australian version is compatible with carriers who run 3G network on 850Mhz (Rogers, AT&T, Telus, Bell ...). I`m using one right now with Rogers. This 850Mhz frequency is hardware related and can`t be altered by flashing the radio. On some custom ROMs which required to use certain radios to enable the 576 RAM.
Should be fine
drj said:
Hello,
I was going to purchase a Telstra 9393 Australian version which has HESPA 850. My question is regarding flashing a custom rom. If I leave the radio stock and flash a rom will it work since it has a different frequency?
Anyone bought one for use with Telus or Bell or guess AT&T and flashed a custom rom? I have been reading about a setting for frequency?
Also do you know where I can get the stock Telstra rom so if i need to go back?
Thanks
Click to expand...
Click to collapse
I've flashed two ROMs (including a 23541-build) on to two different 9193s (the Telstra model - I don't believe there is any 9393 model), and they have been working fine. Better than the stock ROM. Also flashed the Radio on those phones to 2.08.50.08, and no problem there either. My bet is that you'd be fine.
Hey I'm using it on telstra in Aus, and I also have found no issues. Works well, no stress.
Well guess I will be flashing Thank you for the replys. I was getting confused with some saying there was a frequency setting in the rom and i did not want to brick my device.
I am very interested in using the Artemis rom on this Telstra 850mhz device. If anyone is doing that please let me know.
THANKS!
drj said:
Well guess I will be flashing Thank you for the replys. I was getting confused with some saying there was a frequency setting in the rom and i did not want to brick my device.
I am very interested in using the Artemis rom on this Telstra 850mhz device. If anyone is doing that please let me know.
THANKS!
Click to expand...
Click to collapse
You will lose the 850Mhz frequency in the frequency setting when you flash the custom ROM. The reason for that, I think, is because the custom ROM is built from the EU/Asia base system. But no worry, there's a .cab from here http://forum.xda-developers.com/showthread.php?t=624108&page=6 (post 58) where you can restore the Australian version frequency setting
hpacura said:
You will lose the 850Mhz frequency in the frequency setting when you flash the custom ROM. The reason for that, I think, is because the custom ROM is built from the EU/Asia base system. But no worry, there's a .cab from here http://forum.xda-developers.com/showthread.php?t=624108&page=6 (post 58) where you can restore the Australian version frequency setting
Click to expand...
Click to collapse
Unless you are flashing a crap rom you wont loose this. I haven't lost this in any rom I flashed. Just because the phone doesnt offer the hardware doesnt mean wimo doesnt show the bands look at the tp1 tp2 from europe both showed 850 as an option just didnt work for hsdpa
Quick question,
how can you tell which is which by looking at the phones? The HD2 i currently have has been flashed, so it shows t8525 in the settings, when i purchased it, it came in the telstra box but my 3G doesnt work (running on Rogers with a 4000 series sim card)
Is there any other way to see if its the telstra version? where can i check what bands are being used for data?
the rom im running is 1.66.405.2 wwe
Thanks!
Look on the back, towards the bottom. The Telstra version will say NextG Network and have a T logo.
awesome thank you
hey guys i need some advice
i recently got my HD2 T9193 rom version 1.48... i had the SMS bug problems not sending or receiving sms, so i decided to update the rom to 1.72 not knowing that it actually locked my settings to telstra making the whole phone to telstra logos everywhere,
so my problem is, i manage to fix the sms problem but now i cant connect to the internet as i am on OPTUS not telstra, i was able to connect to the internet before i updated the rom,
so any suggestions???