Database Users

Help

Hey every one I'm new to xda and I got my samsung vibrant rooted with the stock system recovery and was working fine but than I decided to do some apps and file transfer from another android phone to it and after that my phone kinda froze on me. So I rebooted the phone and boom nothing happen after the galaxy s animation, its just stuck there then the screen went black out. I rebooted again and this time I went to the sustem recovery mode and try to do the data reset but it couldn't fix it either. I tried to connected to my computer but since the phone wasn't fully booted into the home screen my computer are unable to detect the phone driver. I reconnect the phone and computer together, and this time I got to where it say's "downloading" "do noy turn off target", what is that mean? is it download something or is that I'm suppost to do something to it. Please can someone help me out. I've already download the stock firmwire but couldn't be able to transfer to the mass storage cos the phone couldn't boot beyound the galaxy s animation and eventhough its in the system recovering I still couldn't get it to connect to the phone mass storage. What can I do to fix it?.

You can take the battery out at that screen, but I don't know if it's going to fix your overall issue.

Take sd out. Hook to computer with adapter. Move stock nandroid to sd. Replace sd in phone. Boot into clockwork recovery. Restore nandroid. Reboot.you are now stock with root.

one thing
I know what I did is stupid but at lease I learn my lesson. I would really appreciate if someone could help me out.

help
I tried but its not working cost the phone doesn't read what's on the sd card it read only the mass storage which is the 14g not the 2g memorycard.

The SD card won't be in the phone so of course it won't read from it. It will read from the interbal memory, so do it from there.
Sent from my SGH-T959 using XDA App

Kld4ever2008 said:
Hey every one I'm new to xda and I got my samsung vibrant rooted with the stock system recovery and was working fine but than I decided to do some apps and file transfer from another android phone to it and after that my phone kinda froze on me. So I rebooted the phone and boom nothing happen after the galaxy s animation, its just stuck there then the screen went black out. I rebooted again and this time I went to the sustem recovery mode and try to do the data reset but it couldn't fix it either. I tried to connected to my computer but since the phone wasn't fully booted into the home screen my computer are unable to detect the phone driver. I reconnect the phone and computer together, and this time I got to where it say's "downloading" "do noy turn off target", what is that mean? is it download something or is that I'm suppost to do something to it. Please can someone help me out. I've already download the stock firmwire but couldn't be able to transfer to the mass storage cos the phone couldn't boot beyound the galaxy s animation and eventhough its in the system recovering I still couldn't get it to connect to the phone mass storage. What can I do to fix it?.
Click to expand...
Click to collapse
Turn off the phone, take out the battery and take out the SD card, try to get your hands on a sd card reader for your card so you can fix what you did without using your phone to mount it. Copy the rom or stock firmware over to the card and use the recovery, wipe data/factory reset and then try to load up the stock firmware. if all else fails do a hard reset:
To hard reset Samsung Vibrant, follow the steps below:
Step 1. Turn your Samsung Vibrant off. If your Samsung Vibrant is frozen, pull the battery out and reinsert it.
Step 2. Hold the Volume Down button.
Step 3. Press and release the Power button.
Step 4. You are now presented with a menu that allows for Fastboot, Recovery, Clear Storage, and Simlock
Select Clear Storage by pressing the Volume Down button, then press and release the Power button.
Step 5. Choose one of these: Volume Up for YES and Volume Down for NO. If you selected YES, all data including third-party applications will be deleted from the Samsung Vibrant.
That is for the default recovery so depending on the recovery you are using try to wipe everything and flash the ROM from the sd card, if you need help PM me or contact me on chat.andirc.net #droideris, or irc.andirc.net #droideris
Best of luck!

JPC Rom install issues - dreaded USB logo - Help Doc

Hi,
Just wanted to share my experience getting JPC Rom installed and rooted.
Prior to upgrade, I had the JP3 Rom, rooted with clockwork and 1-click lag fix.
I had some major issues installing JPC. In fact, I ended up with the dreaded USB logo a few times.
This is not a complete guide, but hopefully it will help avoid the problems I had.
1) Before installing the new rom, I strongly suggest that you Factory Reset the phone.
2) Install the JPC Rom using the other guides on this page. I used Odin and choose Repartition to get a clean install.
3) Here is where the problems started. After the rom installed cleanly and the phone rebooted, it would get stuck on the second Samsung logo and eventually go black. This happened to me twice. The fix I found out, is to go into Rececovery mode (Vol Up, Home, Power) after the install and clear the cache, reformat SD and factory reset. After you do this the phone will boot normally.
4) After that I followed the rooting guide on this forum, but ended up with the dreaded USB logo. If this happens to you, just go back into DOwnload mode and reflash with Odin again (following the guide in this forum)
IMPORTANT: I have TWO galaxy s phones. The strange thing is, one of them is VERY easy to get into Download or recovery mode. The other is almost impossible. For those of you that have a similar model to me that seems like it does not have a 3 button download or recovery mode you probably do.
I thought I was bricked, and tried for over an hour to get my second phone into download mode (take out battery, hold three buttons, put in battery, over and over again). I was about to give up, but found I was able to get the phone into download mode if I ....
1) Take Battery Out. Put it back in.
2) Plug phone into USB on computer (do not turn it on)
3) Now try to do the 3 button Download mode. Press all three buttons at one time and release power about 1 second after seeing Samsung logo.
Again my second phone I can very easily get to download mode 100% of the time. I am really not sure why the two phones would be any different. I hope this helps people that have a stubborn phone like mine.
P.S. I did not install Clockwork on JPC, but I did root the phone and installed 1 click lag fix. Phone is running VERY stable and all features seem to work (including Mobile AP).

I hope this helps others like me who tried to install update.zip as explained in some posts & got the dreaded USB logo on boot & didn't know what to do because I am sharp but no programming & all that. I got mine to go ahead ONLY after I put in my SIM & External SD card. With both OUT, I get the USB logo 100% of the times.
I hope this helps.

Ive installed jpc a few time now and a factory reser after flashing did it for me every time

[q] help! Bricked samsung intercept!

Last year(late 2010, maybe mid November), I rooted my phone and flashed recovery with no problem s at all. Some time after that I added Apps2SD and that went smoothly with no problems for about a week. I purchased an 8 GB SD Card for more storage room and after I partitioned it and switched the cards my phone started acting up so i rebooted it. After that I was stuck in a boot loop, so i tried to flash it back to stock but it wouldn't take to it no matter how I tried, whether it be through recovery or SW Update. So then I tried Odin Multi loader(cant remember which version but at the time I made sure it was the one meant for the Intercept) after I flashed it with the Stock through Odin, the phone bricked. Now it will not turn on in any way(recovery or other) the only thing it does do is vibrate when I plug it in to a computer, and it will occasionally show battery life through the touch screen and keyboard buttons by lighting them, but as soon as the it is unplugged it is a brick. I see the little bit of functionality as a little bit of to be able to fix this phone whether through ADB or another function but I desperately need help with this. Can someone please help me fix this phone?
note: I currently have a Samsung Transform as my main phone so if the Intercept can't be helped then it's not that big of a problem.

I have the same problem! Please help!

When you root a phone you put the rom, and recovery onto the sd card. changing sd cards disrupts this process. Put the old sd card in and tell me what happens.

The phone doesnt come on at all

see if you can get it into download mode with the battery out.
Pull battery
connect to computer with usb
vol down + camera + end
If you get into download mode this way flash the stock.tar using SWUpdater.

Nope, it doesnt work, thx though

Ok I've got the same problem with my intercept as well, So i just like to add (maybe its just me) that when i plug my phone to the computer the phone shows that its still functions right (without the screen on), I'm able to make calls, and receive them as well (with the touch of the answer button) but just the screen doesn't turn on, AT ALL!, so KJON i don't know if your having the same problem as me but I'm just a noob and i wouldn't know what to do. But there's some ammo if you need it.

I HAVE THE SAME PROBLEM! i dont even know where /sdcard/sdx/zip/ is!
My phone is also a samsung transform and not and intercept and whenever i press vol down+ Power, only the function buttons at the bottoms light up but not the screen
i am a noob.
help?

noooooob here...i didnt wanna start another thread since i have this same problem, so i hope someone reads this..
couple days ago i bricked my sprint intercept i was using SWu and forgot to take the Binary files for the Moment out so now i cant get my phone to DL mode, ive been searching since saturday night and have tried every Button combo posted and nothing, my phone will not turn on and ofcourse it isnt recognized by my pc BUT, ive noticed that only when its plugged in to the computer after trying to power it up several times it´ll vibrate then the 4 touch buttons will react to either the call or end button, also it makes the low battery sound and if i press the camera button it makes the volume sound but i CANT get to download mode, can i bring my phone back or is it done with? help please! and thanks in advance...

well, i would say boot into rrecovery by making the phone off either power button, or remove and replace battery.
next, you will need to press and hold in order: power/end call, call, and volume down.. this should boot recovery mode.
lastly, use the red scroll device to go to reset facory defaults or factory recovery, use common sense while looking. select with clicking and use arrow back button to go back to recovery main, then reboot to system. easy as pie.

Have you tried ODIN or ADB?
I have flashed the Intercept numerous times, soft bricked more than once, I was always able to recover using either the stock bootloader, CWM recovery, or flashing the ROM/Kernel directly using ODIN or ADB.
If you are still having these issues drop me a line and I'll gather some links together that should get you back up and running.
If the phone will not boot at all, even with a charged battery, I would definately try contacting Virgin Mobile and escalating the issue. I've had plenty of luck replacing devices claiming that the device just dropped dead without notice. They are usually good about sending out a replacement phone, and on rare occasions even giving you an upgraded unit if they are out of stock.
Good luck!

Did you use Odin or the swupdater?
Bug difference. Sounds like there's a missing boot loader.
Sent from my SPH-L710 using xda app-developers app

Hi, did you guys fix your bricked phones? Today I have bricked my Samsung transform (bad flash went with SW upgrade.
Only vibrates sometimes and the buttons flash a little, but no boot at all. Is there any chance to fix it? even with Jtag?
regards

I think I bricked my hero

I was trying the firerat partition change and now it only boots to the HTC screen. I have pulled the battery. Tried to boot into fastboot and recovery without any luck. I tried the RUU to get back to stock but it can't see the phone on USB. I tried using adb and it cant see the phone either.

How are you trying to boot into recovery? Power+home or power+volume down?
Sent from my HTC Hero CDMA using XDA App

bricking your hero is almost impossible fixing problems like this (i had one like this 2 days ago) takes a LONG TIME to fix....like a few hours of straight hard-core googling and trial and error and creativeness
edit: explain problem in as much detail as possible (rom? recovery menu? last thing you did? etc...) and i'll try my best to help

I tried home + power, home + down vol + power, down vol+power, and Home + back + power. Nothing goes past the HTC screen and I never get connected to ADB because it can not see the device. I was running Clockwork Mod 3.0.0.5 recovery agent and gingerbread. I brought it in yesterday to Sprint and they said it had a hard failure that something had fried and gave me a replacement. It had been acting weird like corrupting my microSD card for the past few days but I thought it was from copying the newest code onto it and forgetting to stop the device in windows. I'll leave it alone till March when I can upgrade to an EVO.

I had an issue with forefathers, but I could get into recovery . I would get a "device is full " and it wouldn't do the final boot. I would have to take out battery and start again.
I load everything on my SD card for roms, mods, etc,. I found the issue when I took out my SD card and found I had named the text file incorrectly and since my Rom is bigger than the default amounts (90 2), it wouldn't load. I am at (mtd 115 4) and my system is at 98% and runs great. It doubled my internal storage. I am running a Jaybob 31DEC-CM6-REDGLASS Rom with Deca's battery tweak and I couldn't. be happier.
Try putting the zip files and text file on SD card if you can get into recovery if you are trying from your PC. Make sure you have enough space for your Rom with gapps too.
I thought mine was bricked as well, but I could still get into recovery.
Drunkpilot
Sent from my HERO200 using XDA App

Is the charge light coming on?
Sent From My Pedal-to-Metal Hero

I'm wondering,htc driver somehow corrupted. Did you try uninstalling Htc sync and driver and reinstalling? Just a thought.
Sent From My Pedal-to-Metal Hero

[Q] First blue screen, now boot loop.

Hello XDA-devs forums,
I'm having an issue since yesterday.
I have rooted my Huawei Ideos X5, and it ran fine for a day or so.
However, when my battery ran out it shut down into a completely blue screen.
When I tried booting it again, this just showed me a blue screen as well.
Now, I fixed this issue by connecting the phone to my PC after booting it with the Vol+ and Vol- pressed.
(So you get the pink/purple screen)
However, when I opened the phone on my PC, all I saw was a "239 MB" "empty" space, and it should have ~2GB..
I placed a backup copy I saved of my "image" folder in that 239 MB storage, and it booted.
However, today I hooked it up to my PC again to see if it magically changed..
And I couldn't access the 239 MB space anymore.
When I tried fixing the issue with a reboot of the phone, that just caused it to get stuck in a booting loop.
So now I'm stuck with a phone that keeps trying to boot itself,
and I can't access it on my windows PC.
I can, however, access 4 different folders of the phone on my linux notebook.
Now, my question is: can someone with a good understanding of problems like these please help me out?
I'm getting kind of fed up with it, as I've only got the phone for 2 days now.
Thank you in advance, and thank you for taking the time to read this.

Have you tried removing the battery for 5 minutes and then putting it back in?
After this, what happens when you press VOL+ and Power?
How about if you press VOL+, VOL- and Power, without the USB cable?

Hello Katu, thank you for posting.
Regarding your questions:
Yes, I have tried to take out the battery for 5+ minutes- it didn't change anything to the situation unfortunately..
If I press VOL+ and Power at the same time, the device boots into recovery mode.
In this I have tried to format the device in order to reset it to factory defaults, but this did not help either.
When I press VOL+, VOL- and Power, the phone boots into the pink/purple screen.

Can you try a custom recovery and a custom rom? I want to see if your onboard flash is borked.
u8800,cm7,[email protected]

I had the same when my phone got f*ucked up. Put the image folder, than download official rom, like b138 and install it. then check your imei. There is a change that it will be 0.

PlanDreaM said:
Can you try a custom recovery and a custom rom? I want to see if your onboard flash is borked.
u8800,cm7,[email protected]
Click to expand...
Click to collapse
Well, I used an original ROM:
U8800 V100R001C00B136(Overseas General version)
And that resulted in the boot.img being corrupted, so I can't even overwrite that anymore.
Also, this is what I see when I hit VOL+, VOL- and Power at the same time to boot into safe mode, and connect it to my PC.
img69 [dot] imageshack [dot] us/img69/244/10101191548pm.png
julle131 said:
I had the same when my phone got f*ucked up. Put the image folder, than download official rom, like b138 and install it. then check your imei. There is a change that it will be 0.
Click to expand...
Click to collapse
I installed the official B136 rom, and after it rebooted, it would just hang on a black screen.
(it used to show the IDEOS or Android logo when it booted)

Hmm mine came with this Rom
U8800 V100R001C00B135SP01 ( general )
Looking at your name you're from the Netherlands ( so am I )
where did you get this 136 version from ?
I would try to put this one on it
You have to put the 'dload' folder into the root of your SD Card,
then boot into boot-loader, after that it'll automatically flash back to the stock Rom.
1 Format SD card
2 On the SD card, create "dload" folder
3 Put the unzipped Rom into "dload" folder
4 Then boot to bootloader (pink screen)

Yes, mine came with that version as well.
However, I couldn't find it anymore and thus downloaded the version I said earlier.
Also, I did everything as you described, except step 4.
You have to boot to recovery instead of bootloader. (VOL+ and Power)
Anyways, I managed to get ClockworkMod's recovery.img on my phone,
and from there on install a custom ROM on the phone, which magically got it working again - even though it didn't work earlier.
Thank you for reading my thread and taking the time to reply to it.
My issue has been resolved.

just for the record, flashing a stock rom is different from flashing a custom rom..
the 4 steps described by Gman2oo6 is the correct way to flash a stock rom (and it is written clearly in the document that is in the stock rom zip file)
[edit]
step (1) is not a necessary step though..

Yeah, I noticed that.
What I did was format my SDcard with FAT32,
and put a custom rom (update.zip) on the SDcard.
I then booted ClockworksMod Recovery and installed the custom rom from the SDcard.
When I tried installing the stock rom, I just followed the PDF file's instructions that came with the stock rom.

hey i udated to GB 2.3.4 (official)and i didnt like the it cuz the wifif ddnt work and the bluetooth also the DATA so itryed to downgrade to 2.2.2 original official and it did the 2/2 steps intalled and when it restarted it did not want to turn on all that happened was it vibrated and thats all so i left it on like that and when the battery died i plugged it in to the AC and the LED turned on red and the touch kkeys also but not the screen so i really NEED help!

Try to turn it on with lead connected but no battery and see if you can start it.
My battery also went dead flat this morning and I couldn't get it started at all till I tried this. Once I got it started the only thing I could do was quickly pop in the batery and let it charge. Just leave off the cover till you get it going.
I have to add that I did not have the problem of a failed update to deal with but it may at least get you started

i tryed it
nope nothin good happened all that happens is a blank screen with nothin on ,LED is off and the touch keys are off. it justz vibrates and when i put the battery it turn the LED on to red and the touch keys turn on but then like 5 min later the LED and keys turn off

astewart said:
Try to turn it on with lead connected but no battery and see if you can start it.
My battery also went dead flat this morning and I couldn't get it started at all till I tried this. Once I got it started the only thing I could do was quickly pop in the batery and let it charge. Just leave off the cover till you get it going.
I have to add that I did not have the problem of a failed update to deal with but it may at least get you started
Click to expand...
Click to collapse
ok heres what i did i wanted to upgrade my phone to the newest version GB 2.3.4.So what i did was download the update and i followed the installation steps i successfully updated to Gb 2.3.4. so like i was checking how it look and the new feature but when i wanted to go on the android market i went to setting and turn on the wifi and it said Error and then i tried the Bluetooth and it said Error also so then i put my SIMs card in and i was like imma use DATA then and when i restarted my phone it had service but no HSPA+ or Edge or GPRS so like i just hatted my phone from their so then i was trying to root it but iddnt know how to do that so like i read this website and i got the UPDATE.APP or 2.2.2 AT&T did the same steps of the installation of BG 2.3.4 and it went to the process and 1/2 stepp good it passed and then 2/2 also passed it installed it and when it said Successively Installed it said Restarting and the scrren turn of and it vibrated and thats all that happened and i left it like that for the whole days and nothing happened
Do u got any idea?
When i connect it to my laptop it says installing drivers .then its says sucesfully installed drivers ready to use. so then i got to Device Manger and i check what has been installed and their it said USB Human interface device and HID-compliant device WHAT DOES THAT MEAN??

Not sure about the HID (human interface device) probably just the way windows sees the device for interfacing with it. With regards to the not booting I have read a lot of people saying that you need to factory reset and clear cache after the upgrade/downgrade. With the phone off, turn it on by long pressing volume+ and power on button till you get the blue recovery screen and from there you can reset factory/ data and also clear the cache. from what I see this should clear up the problem and start up. Please read this thread, it may help you somehow..... http://forum.xda-developers.com/showthread.php?t=1420728
Hope this helps a little

U mean Boot recovery and imma try it and thanks ill check it out
Sent from my MB300 using XDA App

all that i know is that if u customized your partition, it'll bootloop,
so go back to stock-partition ^^

How do I do that got like the steps or video?
Sent from my MB300 using XDA App
when i downgraded to 2.2.2 i installed this V100R001C00B138SP04CUSTC185D002
http://forum.xda-developers.com/showthread.php?t=1251250 got it from that link

Looks like you are not having much luck. Did you try to factory reset?

astewart said:
Looks like you are not having much luck. Did you try to factory reset?
Click to expand...
Click to collapse
well how do i do that do i need to got to the purple/pink screen or bot recovery cuz i cannot access that my phone doesn't do anything pretty much