Database Users

white screen with small colored lines

hi every one. I have a qtek s200 and I have a white screen problem. I don't know why one shiny morning my qtek appear with a white screen. First I think that was the screen and buy a new one. after replaced I turn it one with the new screen the screen seams equal :s After that I made a lot of search and did some thinks like install Active Sync. The active Sync does not detect my phone.. I install the last versions but nothing appear.. when I plug the phone on computer with USB cable nothing is detected by computer but if I press photo+on button it detect a "windows Ce usb device" and nothing appear on active Sync.
I already try reset using style and nothing. I try to update using PDAMobiz_Prophet_WM6_V1.00_Step1 (ROMUpdateUtility_NV_G4.exe). It finish and I get the message that was successful updated. And if I try to update it again appear the same screen saying that don't have a version (see the printscreen). I never see the 3-colour menu :s it just don't appear.
Any one one what I have to do to play again with my phone?
Thank you very much. Best regards.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
printscreen http://img217.imageshack.us/my.php?image=73046337ny4.jpg

Recovery
http://forum.xda-developers.com/showthread.php?t=401326
If at any stage your Prophet fails to start properly or can only enter bootloader follow this:
* Download and install the latest version of ActiveSync (Google for it)
* Download and unzip an AKU2.2 (No Vendor) ROM for the Prophet-any AKU 2.2 will do-from [here | ftp://xda:[email protected]p.xda-developers.com...4721_NVID.exe] or [here | http://wiki.xda-developers.com/index...=Prophet_ROMs]
* Within ActiveSync DISABLE connect through USB (Tools->Connection Settings->Uncheck Allow Connect through USB)
* Put the Prophet into bootloader mode (hold the camera button and insert the stylus into the larger hole next to the power socket)
* Plug the Prophet in via USB
* Run the RUU specific to your device (G3 or G4) from the AKU2.2 folder. If there is only one RUU, use that.
* When it has finished: disconnect the Prophet, and then re-enable the connect through USB in actyivesync before reconnecting the device.
==> if success, will going back into WM5 and then u can use the Lazzy Tool, look at http://forum.xda-developers.com/showthread.php?t=353547
choose WM 6.1 ROM, after u doing that step, u already done with the WM 6.1
SEMOGA SUKSES!

Can't update to nodo. Error 800706BE

No matter what I try to do I can't get my phone to update. I have tried hard resets and different pc's.... Also my focus can only be plugged in once and then it won't register is Zune again unless I do a battery pull. I have 7008 installed from when I debranded to blank. Then to try to get nodo I did 000-88. Could never get it to work so I just put it back to ATT-US. can't get official nodo. Windows phone Developer tools recovery function does nothing. Do I have to send my phone in to get it reflashed or something this whole thing is really irritating. Anyone have any ideas. I also get error code 800705B4. Which is just a timeout. If I'm not mistaken.
Sent from my SGH-i917 using XDA Windows Phone 7 App
this is the error i get:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
from what ive found out by googling....
Error 800706BE is and RPC error....
so zune can't get the update info from MS servers? also my phone doesn't tell me that an update is available either.

Windows Phone Support Tool Log:
UpdateWP version 4.7.1404
Applying updates to device
Id: \\?\usb#vid_045e&pid_0710#13d190e7-ed37-1c75-6b51-80a946ef0fc3#{ca3d7387-f67b-11da-bbec-8000600fe800}
SN: e790d113 - 37ed751c - 6b5180a9 - 46ef0fc3
Name: SGH-i917
KITLName: QSD8XXXE6CD9632
Manufacturer: SAMSUNG
ModelId: 1
MobileOperator:
Version: 07.00.07004.00-00000
Checking your phone's status.
Checking your phone's status: Completed in 0.01 seconds
Checking system requirements.
Checking system requirements: Completed in 0.02 seconds
Downloading updates.
Downloading updates: 0%
Downloading updates: Completed in 3.35 seconds
Checking system requirements.
Checking system requirements: Completed in 0 seconds
Installing updates. Please wait: 100%
Installing updates. Please wait: Completed in 5.66 seconds
Rebooting your phone..
Rebooting your phone: Completed in 37.05 seconds
Completing updates..
Completing updates: Completed in 6.51 seconds
The device has been updated to version 07.00.07008.03-00.00.00000.00-00.00.00000.00

[Q] Can I update the Firmware on Developer Unlocked Device Without Losing the Unlock?

I bought Samsung Omnia 7 which was developer unlocked about 6 months back, it came with Windows phone mango installed when I got it, recently I get a message when I connect it to Zune that there is a minor firmware update available for the device, I haven't installed the update because of the fear of losing my unlock on the phone.
I just want to know considering the fact that my device is developer unlocked, after the installation of new update on the device, will my unlock remain intact or I will be forced to unlock the device again?
I do not see much or any bugs on the device and I see no point in updating the firmware as well, but just want to know what would happen if I did, as I have zero knowledge on the whole thing.
Thanks
Chakru

chakru said:
I bought Samsung Omnia 7 which was developer unlocked about 6 months back, it came with Windows phone mango installed when I got it, recently I get a message when I connect it to Zune that there is a minor firmware update available for the device, I haven't installed the update because of the fear of losing my unlock on the phone.
I just want to know considering the fact that my device is developer unlocked, after the installation of new update on the device, will my unlock remain intact or I will be forced to unlock the device again?
I do not see much or any bugs on the device and I see no point in updating the firmware as well, but just want to know what would happen if I did, as I have zero knowledge on the whole thing.
Thanks
Chakru
Click to expand...
Click to collapse
hi, if your device is unlocked, after update will remain intact. Zune make normally a backup before install a backup (but not shure if by each update). to be save do a backup:BACKUP now your unlocked MANGO phone - to RESTORE over ZUNE tnx xboxmod
Unzip
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
WP7 Update Cab Sender.zip on your computer. Its a update/backuptool. it contain a dummy cab- it will backup your phone- but nothing update. Run the WP7 Update Cab Sender.bat (without ZUNE run). If you get a error, please install the tool from folder "if needed install this tool".
After run the WP7 Update Cab Sender.bat type B for (fake) update and real backup. If you have already a backup in C:\Users\UserName\AppData\Local\Microsoft\Windows Phone Update- please cut and paste it in a save place.
After all you will get a error message.
Is o.k. ignore the error message. Your BACKUP are succesful done. the error causes from the "fake update", the update cab is only a dummy and is neeaded to activate the Backup procces.
INFO: to see this path/files, you have to activate under windows explorer folder options "visible hidden files" The Backup files you will find in C:\Users\UserName\AppData\Local\Microsoft\Windows Phone Update, such as this folder name d4e21648 - xxxxxx - xxxxxx - xxxxxxx.
When you then connect your phone and start ZUNE, and search to updates, ZUNE tell you "your phone software is actuall and you get the RESTOREPOINT. Copy/Cut the Backup folder from ....\Windows Phone Update to a save place
INFO: If you RESTORE it over ZUNE plase be patient, the first 10 minutes you do not see an progress- but wait it will! f the screen go off, turn on and lock off the screen AND wait!Restorations duration is ca. 40 min. please do nothing with the phone in this time. be patient. After Restorations connect again with ZUNE, then you get Samsung App Store alo back
DISCLAIMER
I will not take any responsibility for any damages caused directly or indirectly from using the software-package or the instructions. Read the instructions thoroughly and proceed carefully!
original thread http://forum.xda-developers.com/showthread.php?t=1335452
WP7 Update Cab Sender.zip - (3.67 MB, 6743 views)

LG L7 II stuck in Emergency.

Hello.
At the beginning I want to say that English isn’t my primary language and I apologize for mistakes. I hope this text will be understandable.
I have problem with my LG P710 [L7 II].
Few months ago I have tried to upgrade it using LG_KDZ_FW-Update.
I have started to look for the best software for me and after a long time I found software which include root and CWM Recovery… wow.
Instalation wasn’t completed successfuly. From this time I can run my device only in Emergency Mode. No matter if I connect it to the USB, battery charger or just press button to turn it on.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I don’t know I did something wrong, the instruction was bad or maybe soft was demaged.
I have another cell phone so it wasn’t urgent to repair it then, but now I think it’s time to do it!
I hope you can help me with that.
I’m trying to do it this way:
• Download and install drivers [LGMobileDriver_WHQL_Ver_4.0.3]
• Download and install update tool [LG_KDZ_FW-Update_OfflineFix]
• Download software [V20A_00.kdz]
(I’m working on Lenovo G510 with Windows 10 installed)
• Change hosts file [C:\Windows\system32\drivers\etc] by adding at the end:
127.0.0.1 csmg.lgmobile.com
• Install B2CApp [setup file is inside LG KDZ FW Uptede Toll folder]
• Then I’m opening Automatic Offline Procedure script.
• Few windows appears on my screen. At this time I have Windows Enabler On and Small Server is running.
• After that script starts R&D test toll, I set Phone Mode [Emergency], select my .kdz file and
press Normal Web upgrade test, then on next window Upgrade Start.
• Afterward I clear Software Update Registry, select my language and press on OK.
• Phone Update window appears. Analysis done, download as well, but update stops at 4%.
According to the instruction I disconnect mobile, remove battery and connect it again with pressing Vol- (In order to enter Emergency Mode I guess. I’m lucky guy, I haven’t to press anything, my phone always turn on into Emergency)
• No change after clicking restart. 4% is everything I can get.
ctrlv.it/id/2452/3915649230 - Logs
If you know what is wrong, you have any advice, please help.

How to reload the OS on your BlackBerry Priv

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
With the autoloaders for the BlackBerry Priv now available for download, there's sure to be folks needing to know how the whole process works, and we're glad to help with that. Take a look at our full run down of how to reinstall the OS on your BlackBerry Priv. It's all fairly easy, but do keep in mind you will need to have a Windows or Mac computer to complete the process plus, reinstalling the OS will indeed erase all local data.
Overview
* Install the USB drivers for the Priv. To install the Priv drivers, click here.
* Download the autoloader file for your Priv version from the following URL: AT&T, T-Mobile USA, Verizon, Non US Carrier - STV100-1, STV100-3, STV100-4
* Press and hold both the Power and Volume Down buttons for 30 seconds to boot the Priv into fastboot mode. Alternatively, press and hold the Volume Down while turning on Priv and selecting Reboot into fastboot (when in fastboot mode, the Priv will display the BlackBerry Bootloader Menu and a purple LED)
Windows
* Open and extract the downloaded autoloader file (including all files and folders)
* Open the extracted folder
* Execute the flashall.bat
* Follow on screen instructions as prompted
Mac OS X
* Open and extract the autoloader file (note the location of the downloaded autoloader file (example: Documents, Downloads, Desktop)
* Rename extracted folder to Priv
* Open Terminal (Finder > Applications > Utilities > Terminal)
* Type cd /Priv
* Type ./flashall.sh and press Enter
Follow on screen instructions as prompted
Note: Completing the reload of the OS will erase all local data from the Priv.
Once completed, you should have a fully wiped device and be able to start entirely fresh with the setup process of your Priv. If you run into any issues, be sure to head on into the CrackBerry BlackBerry Priv forums to get some further help. And as always, you use these files at your own risk, don't blame us if you break things.
(Please note the above article is taken from Crackberry.com website:
How to reload the OS on your BlackBerry Priv | CrackBerry.com
http://crackberry.com/how-to-reload-the-os-on-your-blackberry-priv)

Can I flash "Non US Carrier" ROM on a AT&T Priv?

lacordaire01 said:
Can I flash "Non US Carrier" ROM on a AT&T Priv?
Click to expand...
Click to collapse
Did you try? I have the T-Mobile variant and it has way too much bloatware on it.

Crimson Ghoul said:
Did you try? I have the T-Mobile variant and it has way too much bloatware on it.
Click to expand...
Click to collapse
I tried, but the phone does not start after flashing it with Unbranded ROM... stuck in boot loader menu. I tried some combinations of files too but nothing worked.
Now I'd flashed the AT&T ROM again and the phone is working as before.

I tried but my priv got stuck in bootloader menu. any idea why?