Database Users

HELP! Problematic WM6 rom load. Phone inoperative

Hi everybody. I'll try to brief 2 days of an unsucessful rescue operation. I have a XV6700 by Verizon, Tried to flash the WM6 Verizon rom first. My BL version was 2.05, so I had to downgrade to the 2.02. I followed step by step on some guy's post on PPCgeeks. the operation got messed up somewhere in the middle and my nightmare started right there. When flashing the NOID rom to the phone, it gave me an error and now it won't take back the OEM AKU 3.3, it says, WRONG DEVICE, this application is not made for your device. So I forgot about the OEM, tried to COOK a custom rom using kitchen, the only one that the phone will accept is the one with RUU - NO ID and Carrier Generic or Verizon, the ROM flashing process starts at STEP 3! it doesnt do radio upgrade , it starts right on "Upgrading CE..." and at 99% it fails. the phone then, boot ( weird boot screen, pixels, colors, lines ) followed by a blank ( white ) splash screen. and thats it. So i managed to find a GENERIC version of the WM6 already compiled. That one gives me the same error, error 112 ( see picture ) at 99% and boots with the same weird boot screen, blank splash, but this time it does show partial WM6, i can access programs, answer call, messaging etc. but it shows overlapping fonts, and the Dialer is tottaly blank. I tried installing more than 10 different dialers, but the phone screen is blank. Now I need help. I am afraid to make it worst. what could be wrong? My BL shows 2.02 .... but using the mytty software and punching task 28 55a ( as explained on the downgrade procedure ) it doesnt show what it's suppose to show. Heeeeelp!! Thanks
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

T-Mobile G2 Touch Official ROM upgrade Failing/Not connecting Properly

Heres my problem, i have the basic **** 1.5 rom that comes with the G2 Touch (HTC Hero) and T-Mobile being pathetic have cocked things up with the 2.1 update. again.
Im Trying to Flash an old Rom from the HTC website (still better than the default i have), to entice the download of part 1 of 2.1 but it refuses to connect Via USB as soon as i run the program. I got it to work once and it keeled over and Died within seconds.
This is the Rom im trying to Flash:
http://www.htc.com/europe/SupportDownload.aspx?p_id=283&cat=2&dl_id=775
I use Windows 7 32Bit
I just upgraded to:
HTC Sync 2.0.33
The Rom downloads as:
RUU_Hero_T-Mobile_UK_2.73.110.26_R_release_signed_NoDriver.exe
Windows recognises the device fine, it shows up "green" in HTC Sync, Its recognised in "Devices and Printing" as Android Phone.
but as soon as I run the above .exe to upgrade the rom, it disconnects the android from windows, and then tells me that its not connected via USB. retard developers!
Now im really coming to an end with this phone, its doing my nut in.
I managed to get it to run the update somehow, i cant remember how i did it, pulling the usb out and adding it at different stages, somehow lol, and it only started, then died giving me this mess:
Comes up in "Devices and Printing" as an unspecified device called "android 1.0" with the hardware name HTC Bootloader, type ADB Interface
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Closer
I did what it said in the Readme and took the battery out and rebooted, and im back to square one.
Its just physically impossible for me to get off this bloody default ROM!
please help me!

Wait, i think i cracked it. I created a Goldcard and after 2 attempts running the RUU_Hero_T-Mobile_UK_2.73.110.26_R_release_signed_NoDriver it worked!
and as soon as the phone started the "update" popped up for the 2.1 part 1!
yeah boy!

Make sure you have the correct drivers for windows 7
http://forum.xda-developers.com/showthread.php?t=647353

HTC hero bricked .help.....

I bought my HERO just a few days ago.
Once,the system halted and I took the battery out of the phone.
After that,when I turn on the phone,it show the first picture in the attachments
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
and then only when I press the DIAL button ,the phone responses,and it shows the second picture in the attachments
I have checked that the buttons of the phone are all OK.
And I have sent it to someone to mend it,he said that the phone can not be connected to the computer,but he succeeded in flashing it with the miniSD memory card. BUT the phone still has the same problem.What's more ,the H-BOOT has been flashed by him from 1.76.005 to 1.76.007. But the problem still
exist....
Can anybody help me?...
And I'm from China,my English is not very good...

This might help...
g0mib0y said:
EDIT: DON'T UPDATE TO 2.1 AGAIN SINCE IT WILL HANG ONE MORE TIME. WAIT FOR HTC TO RESOLVE THIS ISSUE!!!!!!
EDIT 2: BACK UPP ALL YOUR DATA FROM YOUR MEMORY CARD FIRST!!!
EDIT 3: How did I find this out? I talked to a very helpful HTC suport rep (yes they do actually exist in Sweden). He helped me do these steps and so I thought I should share this.
Ok so you got a message that 2.1 was available for your Hero - FINELY! and you installed it using OTA. And then you got a triangle with a ! in it and you rebooted and all it says is "HERO".
This is how to solve it!
Take out your memory card. FORMAT TO <span style="font-weight:bold;">FAT32</span>!!!
Download the RUU 2.73.405.5 from HTC support homepage
Run the installation.
When it fails to find your phone <span style="font-weight:bold;">DON'T EXIT!!!</span>
If you are using Windows 7 go in to c:\Users\<span style="font-style:italic;">yourusername</span>\AppData\Local\Temp
Search for ROM.zip
Move to desktop
Rename to HEROIMG.zip
Transfer to your newly formated memory card now with FAT32 file system
Put memory card into phone
Start phone holding volume down pressed.
It will now check zip fil and then ask if you want to install.
homekey for YES
After installing you have 1.5 again and can safely upgrade to 2.1 OTA
Click to expand...
Click to collapse

HTC surround enter usb host mode after unlock by XTC clip

HTC surround T8788 AT&T enter usb host mode after unlock by XTC clip.please help me.Thanks.

Just reflash your phone.

eglunas said:
Just reflash your phone.
Click to expand...
Click to collapse
i flash RUU_Surround_TELUS_WWE_1.04.661.00_Radio_5.51.09.29_22.32.50.10U_by_ansar
but error 294 : invalid vender ID.i need rom at&T please help.

Here is the At&t ROM its the original 7.7004
http://www.megaupload.com/?d=KY9UZEHI
(Charge Battery to 100%)
With the phone powered off hold volume down and power button to boot into Bootloader screen (Red Blu Green White),plug in usb cable to computer and into the phone(it will say "serial" at the bottom ( let it install the qualcomm cdma driver) Then "serial" will change to "USB" at the bottom of the phone screen, extract the ROM.zip file from download link above and click the Rom update utility EXE and follow the instructions from there.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Ok I need you help please, I have the same problem with my htc 7 surround of AT&T, but I didn´t use the tool "unlock by XTC clip". My phone worked well, but the last week, it freezing in the logo "HTC" and don´t pass from here; it do not start wp7.
I use this tool that you give from megaupload but when the program verify the image version of my htc - it is in blank, my phone phone don´t have image version- I don´t know what I have to do. I use everything to install a new windows phone 7 operating system to my htc surround.
please give me a response...

i need this file but link not working again. says file might have been deleted
waiting for your response.

I need this file but link not working again. Thanks in Advance... Kamijee

deleted

[ANSWERED] Rollback to RealmeUI 1.0

How do I rollback to RealmeUI 1.0?

Found out the answer myself in https://c.realme.com/in/post-details/1393411074392449024
FAQ:
Click to expand...
Click to collapse
Q1 - Why haven’t I received the Stable release?
A - Once again, this is a phased roll out and will be available to all the users very soon. Kindly be patient and wait for the update on your device.
And for the beta user(Early Access/ Open beta) you will directly receive the Stable Release for the first time.
Q3 - Why my device can not access the data file in File manager after update to latest realme UI 2.0 version?
To protect user data security and privacy,Android 11 does not allow apps to access each other's file directories，that’s why the access [Android/data] is now restricted on Android 11（realme UI 2.0）, not even the built-in realme file manager can access it.
Q3 - How to roll back to Android 10 ?
A - Note:
1.Your personal data will be erased when you roll back.Please back up your data before your operation.
2.You can’t be back to the Early Access version once you roll back.
3.You need manual update the latest realme UI 1.0 version if you lost some pre-install app
Step 1: Download the roll back package in your phone and remember the location.
(The package will update in time in this thread,please keep an eye on it)
Link: realme 7i roll back_O
https://download.c.realme.com/flash/Rollbackpack/realme_7i/RMX2103PU_11_OTA_0430_all_W1nRl1NF0XCR.ozip
Step 2: Enter recovery mode to roll back:
Turn off your phone-->Long press the volume down and power buttons at the same time enter recovery mode-->Choose the language -->Install from storage--> Input your screen locked password-->Find & tap the rollback package to go back to the previous version.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Click to expand...
Click to collapse