Database Users

white screen with small colored lines

hi every one. I have a qtek s200 and I have a white screen problem. I don't know why one shiny morning my qtek appear with a white screen. First I think that was the screen and buy a new one. after replaced I turn it one with the new screen the screen seams equal :s After that I made a lot of search and did some thinks like install Active Sync. The active Sync does not detect my phone.. I install the last versions but nothing appear.. when I plug the phone on computer with USB cable nothing is detected by computer but if I press photo+on button it detect a "windows Ce usb device" and nothing appear on active Sync.
I already try reset using style and nothing. I try to update using PDAMobiz_Prophet_WM6_V1.00_Step1 (ROMUpdateUtility_NV_G4.exe). It finish and I get the message that was successful updated. And if I try to update it again appear the same screen saying that don't have a version (see the printscreen). I never see the 3-colour menu :s it just don't appear.
Any one one what I have to do to play again with my phone?
Thank you very much. Best regards.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
printscreen http://img217.imageshack.us/my.php?image=73046337ny4.jpg

Recovery
http://forum.xda-developers.com/showthread.php?t=401326
If at any stage your Prophet fails to start properly or can only enter bootloader follow this:
* Download and install the latest version of ActiveSync (Google for it)
* Download and unzip an AKU2.2 (No Vendor) ROM for the Prophet-any AKU 2.2 will do-from [here | ftp://xda:[email protected]p.xda-developers.com...4721_NVID.exe] or [here | http://wiki.xda-developers.com/index...=Prophet_ROMs]
* Within ActiveSync DISABLE connect through USB (Tools->Connection Settings->Uncheck Allow Connect through USB)
* Put the Prophet into bootloader mode (hold the camera button and insert the stylus into the larger hole next to the power socket)
* Plug the Prophet in via USB
* Run the RUU specific to your device (G3 or G4) from the AKU2.2 folder. If there is only one RUU, use that.
* When it has finished: disconnect the Prophet, and then re-enable the connect through USB in actyivesync before reconnecting the device.
==> if success, will going back into WM5 and then u can use the Lazzy Tool, look at http://forum.xda-developers.com/showthread.php?t=353547
choose WM 6.1 ROM, after u doing that step, u already done with the WM 6.1
SEMOGA SUKSES!

[Q] Pattern Lock on 2nd hand Flipout?

Hi all,
I bit the bullet and picked up a 2nd hand OrangeUK Flipout (details available if I need to prove I bought it legally)... but the seller cannot remember the pattern to draw to access the phone.
How might I resolve this issue, please?
I can access the Bootloader, which is on v91.10, but that's all I've found so far.
I have found RSD Lite v5.6 and the USB Drivers from the MotoDev website.
Will flashing RUTEM_U3_01.19.2 (or any other RUTEM) onto the device ie following the Debranding Guide, reset this and allow me to start playing with Android?
What about the FlipOut Recovery?
Thank-you,
Dylan.

Wow. Err, okay, I wasn't expecting it to be that easy.
It only took a simple Hard Reset and it's fine - Back to the start as if seting up a brand new out-the-box phone!
In case any other fellow Noobie-Noobs encounters this issue, here's what I did:
Motorola Flipout (MB511) - Step by step hard reset
1/. Switch the device off - Hold the power button for a couple of seconds and then press Power Off
2/. With the device off, open it up, hold the X key and hold down the Power button until you see the Motorola M.
3/. Shortly after, an image like this will appear:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
4/. TAP the power button to enter the Android System Recovery menu.
5/. Use the little D-Pad to select the 4th option - Wipe Data/Factory Reset.
6/. Press Enter to confirm.
7/. Confirm you want to reset the device.
8/. After the reset, go back into the System Recovery menu and select the 1st option - Reboot.
You should now have one factory-fresh phone!
Gratefully translated from Portuguese instructions at the EIL forum!

How to root, step-by-step.

ok guys, so first, i want to apologize for my bad english. im not very good when it comes to writing and talking.
let's go; what we are going to do is flash the ROM with aan included ROOT, with the posibility of wiping our device.
I remind you that: **I'M NOT RESPONSIBLE FOR ANY DAMAGE TO YOUR DEVICE OR YOUR COMPUTER.**
**I RECOMMEND CHARGING YOUR BATTERY TO 100%**
**I ALSO RECOMMEND YOU TO MAKE A COPY OF ALL YOUR DATA**
YOU WILL MISS YOUR GARANTY IF YOU ROOT YOUR DEVICE**
​
First step: DOWNLOAD THE ROM Through this link and place it in your desktop.
2. you will also have to download ODIN 3​
3.in Developer options, activate the USB Debugging option (Settings --> Developer options --> USB Debugging
Ok, you have to start ODIN and you have to get your device in Downloading Mode. (you will do this by shuting it off. and then pressing *VOLUME DOWN KEY*+*HOME KEY*+*POWER KEY*. when you do that you should press the volume up key) When you are in Downloading mode you should connect your device to your PC.
4. Once synchronized, with Odin, you have to select "OPEN" where it says PDA. select the archive you downloaded before. (the one with the name *I8190XXALK6_I8190XEFALK1_HOME_ROOTED.tar.md5*) (you have to uncompress that item before using it)
5. then you press start in Odin, and wait 'til the instalation finishes. the your device should reboot and odin should show a message saying PASS!
6. then you should be able to boot your device like you do normally.
EXTRA STEPS JUST IF YOU HAVE ANY ERROR​
1. if you cant boot, you will need to WIPE your device instaling this archive and use it like in step 4 through the PDA button.
2. if you still have any problem, you should install this following step 4.
how your device should look like
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Any problem or suggestion, please comment and thank.

This will install an older December rom! I'm afraid it's a step back, and bad advice.
Most countries have moved on from the LL2 rom in that file.
The instructions also mention the LK6 rom, which is even older, and not attached above.

this is avicoh first rooted rom and it was posted here on the forum long ago. I dont know why u reposted, to be honest i wayted for u to post but thought u come up with another solution that doesnt include Odin.
Best regards,

Yeah this isn't anything new, I and everyone here thought there was some kind of new ROOTING method. The Rom is already Rooted.
Sent from my GT-I8190 using xda premium

This has been covered before in the correct forum. Read before posting.

Posted in the wrong topic, my apologies to mod's.

Bricked Help Me

i tried to flash drivers i get this errer
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
i was on android l v12 , my device is note 3g
i tried to flash new offical miui6 via twrp 2.8 i got error
and wiped data,system etc...
so i am not able to enter recovery and even into rom what to do??
Please Help ME

It seems a problem with Windows rather than with your phone.
First of all don't worry, there are very high chances that you will recover the phone in working state. I worked for over a year with MTK devices, they brick very easily but it's also easy to unbrick.
It's a signature error, not a driver error. I remember Windows has somewhere the option to disable signature checking for drivers. Disable it, then after installing this driver you can re-enable it if you want.
I assume you are able to proceed from this step on, once phone is recognized by PC. If I'm wrong, feel free to ask

To Install Driver without Signature error.
This will Help u to install driver without signature.
What to do:
1. Hold down the Windows key on your keyboard and press the letter C to open the Charm menu, then click the gear icon (Settings).
2.Click More PC Settings.
3. Click General.
4. Under Advanced Startup, click Restart Now.
NOTE: In Windows 8.1, the ‘Restart Now’ button has moved to ‘PC Setting -> Update & Recovery -> Recovery.’
5. After restarting, click Troubleshoot.
6. Click Advanced Options.
7. Click Windows Startup Settings.
8. Click Restart.
9. After restarting your computer a second time, choose Disable driver signature enforcement from the list by typing the number 7 on your keyboard.
10. After restarting, you will be able to install the drivers normally; however, Windows will display a warning message. When the warning appears, click Install this driver software anyway.
You are now complete. I hope this will help you. Good Luck..

Please help me for apgrade or root 8227L_demo

Hello my friends. I have an android hand unit like the one on the link.
https://www.aliexpress.com/item/33035372080.html?spm=a2g0s.9042311.0.0.25a64c4dPPWPHj
I need to do firmware update οr to rout this HU.
Here's a difference in the model's name... The factory information is different from the CPU-Z information.
The seller of course does not help. He forcefully responds to messages and does not understand.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I only ask you 2 things.....Do a firmware upgrade or root the device.
The main problem is the radio application. While I have English as my primary language, the radio only holds Polish and does not have a good signal.
Please Help me

any help?

Look for this instruction in 4pda.ru forum https://4pda.ru/forum/index.php?showtopic=936535&st=11880
Easy! For some reason, it is not described in detail and simply here.
I will try:
- download our scatter file to the computer (laptop);
- Download FlashTool with SP_Driver_v2.0 (firewood) and install on the computer (laptop);
- Download SuperSU.zip and throw in the root of the body;
- Download Android Terminal and install on the body;
- Download also TWRP, this one came up to me, the rest mirrors;
- rename TWRP to recovery.img - this is important!
- we throw recovery.img next to our scatter file;
- open FlashTool, load our scatter file, see that the checkmark is only on recovery! ;
- further according to the scheme as described on the forum - click Download, connect the switched off body and wait for success!
Success will be, of course, if the firewood is already standing and the dad-dad cord is whole.
- Now you need to reboot into recovery. to do this, turn on the body, launch Android Terminal, give the reboot recovery command;
- from TWRP we put zip SuperSU;
- ALL! We reboot and rejoice.
I hope it turned out simple and clear. Good luck!
Click to expand...
Click to collapse

Can I switch to a different luacher or operating system?