2.1-update1 - Vibrant General

Does "2.1-update1" mean I have the recent OTA update?

ECLAIR.UVJI6 under "Build Number" means you have the latest version.
Vibrant came stock with 2.1-update1 and the latest update doesn't change that. Your build and baseband will both end in JI6

Hm, I had a firmware update available last night and I ran it but it "bricked" my phone. I spent all day learning how to get back to stock. I finally fixed my phone, but when I went back to run the update again I get "No firmware."

The same way you got back to stock can get you to the latest update. It's really easy, just make sure you are using Odin 1.3
Are you rooted right now?

No, since I got back to stock I haven't done anything besides redoing some of the old settings I had. Last time I rooted I used RyanZAs OCLF, but I had kind of decided being rooted (or something) was the reason the update broke my phone.

Just odin from my thread. Its the same as the OTA. Undo all your lagfixes and all BS. before trying to do it.
its all explained. Dont see a need for 30 threads on the same thing.

Related

JI6 Came to my Vibrant & Went Away

So i got an icon on my notifications bar that said "DM" Device Management, and i know that meant that my update was being downloaded OTA. After about 1 minute, it went away. I already installed the JI6 manually through ODIN. So could that just mean that it was recognized that i already had the update, or did it "fail" because i had a manually installed ROM? Thanks for the help.....This is my first post by the way. I love XDA.
My GF just got her update notification today and it nearly bricked her phone. Mine is already updated through odin, so i figured i just let her phone update through ota. Well, the update failed on her and it caused her phone to get stuck on the Vibrant screen. This happened while we were out, but the good news is that the ota update fix the hardware lock. I used odin and flashed the update again and all is well. For the ones that knows how to use odin, I would highly recommend updating it yourself through odin.

[Q] OTA Update ?

Couple of questions: Samsung Fascinate
I previously installed a DJ05 rom and then odin'en back to stock and then did a factory reset three times. So i assume i am back to stock at this point.
My phone specks after Odin flash and factory reset now say:
Firmware version 2.1 update 1
Baseband version DJ05
Kernel version 2.6.29
Build number DH12
1. Are these the original verizon software specs that the phone came out of the box with or are some of these specs left over from the DJ05 rom ( since the basband version still says DJ05)?
2. I have tried doing the OTA update to DL01 or DL09 whichever it is, and it sucessfully downloads the software but when it tries to install it in recovery i see there is a red message generated after it tries to update the modem which i cant read because the text is moving so fast and then the phone reboots and generates and error message saying,
Update failed or incomplete.
Reason : IP Previous Upgrade Failed.
Just wondering would any of the specs that i listed above be the cause of the update failure?
Thanks for any input.
You go back to the stock radio too? Thats my only guess
Sent from my Blackhole Voodoo Fascinate using TapatalkPro
Solution
I got it figured out so I am posting this so hopefully it might help someone.
The past 24 hours i have been trying to update to the OTA DL09 update with out any success.
I had previously rooted and installed different ROM's on multiple occassions and gone back to stock on multiple occassions using ODIN and these recovery files that i had downloaded from the forums.
As a result of all of this ROM installation/Recovery/ROM installation/Recovery over the past couple of months my Baseband version was changed to DJ05 and my Build was changed to DH12 which i think was creating the problem with the OTA update installation to DL09.
Solution:
Do a fresh install using Odin and flash the DL01package3.tar.tar which can be found in the fascinate Deveolpement forum then to the OTA update on your phone. This worked for me and i now have the DL09 version running. Hope this helps someone.

Got 4.5.81, want to update it but can't?

A buddy gave me a phone he's had laying around -- don't know where he got it, but it's got 4.5.81. No, I didn't mis-type. Since I don't think it was ever released (trial image or something?), it won't pull an OTA update.
I'd like to keep it as a stock test phone, and leave my own Atrix running CM9. How do I go about updating the .81 phone to, say .83 (or newer) so that it will pull down the latest OTA updates. I'd like to not have to unlock the phone if possible-- want this one to be "stock".
Any ideas??

"Software status: Modified" and the OTA updates...

Hi all,
I was running my stock 5.1.1 (LPD23.118-6.1) rom rooted for a long time and wasn't able to receive OTA updates due to the obvious reason about rooting and etc. My recovery wasn't changed. So, I saw the thread about that "flashable zips" about 6.0 roms and decided to test it. Due to some crashes and forced closes, I decided to back to my previous backup of rooted 5.1.1 stock rom. But now I want to have my phone stock as hell, and the first thing that I do was flash the most updated firmware that I found in here that was available to download. I flashed the whole LPD23.118-6.3 stock rom, a little bit newer than my old stock rooted rom. Everything working, everything fine, except...
In bootloader it says "Software status: modified", and when I try to manually check about updates, it says that my software is up to date, which I know isn't true, because OTA update of Android 6.0 is already available (i have a friend who got an X Play and he already received the ota).
How can I solve this?
Totemic_tHiRp said:
Hi all,
I was running my stock 5.1.1 (LPD23.118-6.1) rom rooted for a long time and wasn't able to receive OTA updates due to the obvious reason about rooting and etc. My recovery wasn't changed. So, I saw the thread about that "flashable zips" about 6.0 roms and decided to test it. Due to some crashes and forced closes, I decided to back to my previous backup of rooted 5.1.1 stock rom. But now I want to have my phone stock as hell, and the first thing that I do was flash the most updated firmware that I found in here that was available to download. I flashed the whole LPD23.118-6.3 stock rom, a little bit newer than my old stock rooted rom. Everything working, everything fine, except...
In bootloader it says "Software status: modified", and when I try to manually check about updates, it says that my software is up to date, which I know isn't true, because OTA update of Android 6.0 is already available (i have a friend who got an X Play and he already received the ota).
How can I solve this?
Click to expand...
Click to collapse
The force closes you got are completely normal and if you read the thread you will have found out you just need to reboot your phone until they go away.
The status modified just means your bootloader was unlocked and doesn't matter.
You have a few options, keep trying for OTA, flash another version and keep trying for OTA, sideload one of the available OTA zip files, or try a TWRP backup.
scottdanpor said:
The force closes you got are completely normal and if you read the thread you will have found out you just need to reboot your phone until they go away.
The status modified just means your bootloader was unlocked and doesn't matter.
You have a few options, keep trying for OTA, flash another version and keep trying for OTA, sideload one of the available OTA zip files, or try a TWRP backup.
Click to expand...
Click to collapse
Thanks for your reply. Actually i'm downloading the recently posted 6.0 firmware for the Brazilian/Latin American rom in firmware's thread. Unfortunately the download is very slow, but I guess I can surely update without losing anything. The only strange thing is that I didn't received any OTAs....
Totemic_tHiRp said:
Thanks for your reply. Actually i'm downloading the recently posted 6.0 firmware for the Brazilian/Latin American rom in firmware's thread. Unfortunately the download is very slow, but I guess I can surely update without losing anything. The only strange thing is that I didn't received any OTAs....
Click to expand...
Click to collapse
It's not necessary that if your friend has received the OTA then even you will receive it within few days. The OTA is rolled batch wise and no one knows which phone is in which batch except Moto of course. [emoji4]
Sent from my XT1562 using Tapatalk

GS5 verizon 4.4.4 to rooted marshmallow

I have a Verizon GS5 that has been towelrooted on 4.4.4 for close to 2 years. It's worked ok, but I've started seeing various issues that required a factory reset. Since I'm back to no settings, I was thinking updating the OS would be a good idea. I would like to move to either Lollipop or Mashmallow but it looks like the latter may be a problem with my phone (CID 11 and Verizon) while keeping Knox 0x0.
I'm having a problem following the guide that I've found here:
https://www.androidinfotech.com/2016/07/root-samsung-galaxy-s5-sm-g900v-verizon.html
The issue is that I can't get the phone to connect to my PC for Kies or ODIN. It fails to load the MTP driver for my GS5 but works fine with my wife's GS5. Hers is stock Lollipop or Marshmallow and mine is still on JB but is rooted.
I guess what I'm wondering is what my options are. Should I remove root so that I can hopefully connect to the PC to transfer the files over and updating? Or, is there something else I should try first? I haven't worked on many phones and I'm a little nervous about doing something irreversible at this point. I don't know that I need Knox at 0x0, but since I can't get back if I trip it, I'd rather not trip it.
bkenobi69 said:
The issue is that I can't get the phone to connect to my PC for Kies or ODIN. It fails to load the MTP driver for my GS5 but works fine with my wife's GS5. Hers is stock Lollipop or Marshmallow and mine is still on JB but is rooted.
I guess what I'm wondering is what my options are. Should I remove root so that I can hopefully connect to the PC to transfer the files over and updating? Or, is there something else I should try first? I haven't worked on many phones and I'm a little nervous about doing something irreversible at this point. I don't know that I need Knox at 0x0, but since I can't get back if I trip it, I'd rather not trip it.
Click to expand...
Click to collapse
Try to dial *#0808# in the stock phone application.
You should see a menu with several options.
Select "MTP+ADB" under USB settings and press "OK".
Then you'll be able to connect your phone via MTP or ADB to your PC.
If there's no menu, then (assuming you're rooted) open a good file browser (ES, Root Explorer or something) and open the file /efs/carrier/HiddenMenu (it's a simple text file) and replace OFF with ON there.
Save the changes and reboot the phone.
Now the menu should be operational.
Unfortunately, I already tried to update to 6.0.1 so this very helpful info is a little to late.
I followed all directions on the linked page above but didn't get things working. I repeated 2 or 3 times now and I'm clearly missing something. I can get through installing busybox, but then when I reset, it hangs at the samsung screen and just vibrates 3 times repeatedly. I'm going to have to figure this out tonight as I don't really have a backup phone.
bkenobi69 said:
Unfortunately, I already tried to update to 6.0.1 so this very helpful info is a little to late.
I followed all directions on the linked page above but didn't get things working. I repeated 2 or 3 times now and I'm clearly missing something. I can get through installing busybox, but then when I reset, it hangs at the samsung screen and just vibrates 3 times repeatedly. I'm going to have to figure this out tonight as I don't really have a backup phone.
Click to expand...
Click to collapse
Currently root is impossible for MM on G900V CID11.
Impossible means you cannot gain it now, most likely it's forever.
There's no internet site which can help.
You must choose: root on LP or unrooted MM.
You must decide if you want a stock ROM or something (TW-based) else too.
It's a good idea to flash and use a stock firmware for the time while you're thinking.
Interesting... I guess I must have been reading things wrong because I thought I could go to MM with root. I'll try going to Lollipop then but first I'm going to just flash back to JB 4.4.4.
I downloaded 4.4.4 from Samsung and was going to write it with Odin, but it says FAIL when I try to flash. I suspect I just tripped Knox...
SW REV CHECK FAIL : [aboot]Fused 2 > Binary 1
I'll look around to find a guide, but if you have a suggestion, I'd certainly listen!
bkenobi69 said:
SW REV CHECK FAIL : [aboot]Fused 2 > Binary 1
Click to expand...
Click to collapse
This means that you've upgraded your phone's firmware while experimenting.
Now you cannot directly flash 4.4.4 with Odin, you're limited to 5.0 (BOK3) and above.
Ok. I'll read the guides on the head of this list and see if I can find the right information.
FWIW, I was following the same how-to that most of the stickies point to and say is safe. I wonder how I got to a position that I'm in now when I did the same as recommended. Painiac's thread points to the same thing I did:
https://forum.xda-developers.com/ve...al/guide-painiacs-essential-guide-to-t3319848
I think I may have tried to flash a MM stock rom though when it got into a boot loop. I suspect that would be the issue.
Bootloop is not a problem in this case.
Just reboot to the recovery and perform a factory reset from there.
The phone will boot but the first boot will take 10-15 min.
bkenobi69 said:
I have a Verizon GS5 that has been towelrooted on 4.4.4 for close to 2 years. It's worked ok, but I've started seeing various issues that required a factory reset. Since I'm back to no settings, I was thinking updating the OS would be a good idea. I would like to move to either Lollipop or Mashmallow but it looks like the latter may be a problem with my phone (CID 11 and Verizon) while keeping Knox 0x0.
I'm having a problem following the guide that I've found here:
https://www.androidinfotech.com/2016/07/root-samsung-galaxy-s5-sm-g900v-verizon.html
The issue is that I can't get the phone to connect to my PC for Kies or ODIN. It fails to load the MTP driver for my GS5 but works fine with my wife's GS5. Hers is stock Lollipop or Marshmallow and mine is still on JB but is rooted.
I guess what I'm wondering is what my options are. Should I remove root so that I can hopefully connect to the PC to transfer the files over and updating? Or, is there something else I should try first? I haven't worked on many phones and I'm a little nervous about doing something irreversible at this point. I don't know that I need Knox at 0x0, but since I can't get back if I trip it, I'd rather not trip it.
Click to expand...
Click to collapse
Marshmallow can not be rooted on CID 11 devices. The Samsung drivers are found here: https://www.samsung.com/us/support/owners/product/galaxy-s5-verizon You can follow the 5.0 root guide here: https://forum.xda-developers.com/ve.../testers-required-easier-root-method-t3561529 to downgrade to 5.0. If you want to downgrade past that to a version lower than 5.0, you will still have to follow that guide then follow the instructions here (I recommend you to follow the root guide for 5.0 above then skip steps 1 and 2 on this page): https://forum.xda-developers.com/ve.../guide-downgrade-to-kk-nk2-ncg-mm-lp-t3686858 . You can find stock firmwares here: https://forum.xda-developers.com/showthread.php?t=2784880 (stock firmware, kernel, and modem files) and if you get bootlooped or bricked, just reflash the combination file from the root guide. If you want to root 4.4.4, follow the downgrade method using all of the NK2 files but the flash the NGC kernel, run through the setup, then use towelroot and flash the NK2 kernel after that. If you ever get stuck on the red Verizon screen, just pop the battery out and reboot.
That's about all anyone can do and a run down of everything.
Thank you for posting specific guides. I'll go back to step 1 and try again. The primary issue I have at this point isn't reading the guide and following directions, its finding the right guide to reduce the number of images I need to download. I'm on 1.5mbps DSL so d/l a 2GB file takes most of a day. I have several that don't appear useful at this point which means I've lost several days.
bkenobi69 said:
Thank you for posting specific guides. I'll go back to step 1 and try again. The primary issue I have at this point isn't reading the guide and following directions, its finding the right guide to reduce the number of images I need to download. I'm on 1.5mbps DSL so d/l a 2GB file takes most of a day. I have several that don't appear useful at this point which means I've lost several days.
Click to expand...
Click to collapse
Understandable, I can't believe it is 2018 and we still haven't invented a way to compress 1.7GB into 1.7MB archives to make life easy on low connections. How is battery life on 4.4.4 and which update of 4.4.4 are you on? I've been having an issue with my phone dropping a percent every 2 minutes on 5.0/6.0. It would be nice find a version to root along with excellent battery life.
The reason I was looking at updating was due to battery issues. I had the phone for around a week before I rooted it (a couple years ago). After rooting, I started seeing immediate battery issues. My wife has the same unrooted phone (currently on MM) and has never had the type of issues I have. I figured the issue was likely a bad kernel and was thinking I'd just update to something newer (LL or MM) to help. I assume a new battery would help since mine is 1-2 years old, but I swapped with my wife's phone and she still gets lots better performance. Once I get this back up, I'll probably buy a new battery for each phone.
So it appears that I must have upgraded the bootloader to a point where towelroot no longer works as was previously suggested. I believe then that I need to follow the second guide to be able to downgrade to a rootable Lollipop version:
https://forum.xda-developers.com/ve.../guide-downgrade-to-kk-nk2-ncg-mm-lp-t3686858
I am downloading the PB1 rom and lolliroot and need to also get a system restore, kernel, and modem. As I said, my connection is terrible so it would be great if someone could suggest which version of restore I should go with. I was going to install Lollipop in the end (that was the original goal). I figured I'd just get OC4 since it's likely to have the least bugs and best performance. If that is a mistake and I should go with an earlier version of LL PLEASE throw it out there!
Ok, I tethered to my wife's phone and am burning her data (shhhh, don't tell her).
I grabbed all of the OC4 files, the PB1 rom, and lolliroot. I think I have everything I need so long as OC4 is a good place to end up.
bkenobi69 said:
The reason I was looking at updating was due to battery issues. I had the phone for around a week before I rooted it (a couple years ago). After rooting, I started seeing immediate battery issues. My wife has the same unrooted phone (currently on MM) and has never had the type of issues I have. I figured the issue was likely a bad kernel and was thinking I'd just update to something newer (LL or MM) to help. I assume a new battery would help since mine is 1-2 years old, but I swapped with my wife's phone and she still gets lots better performance. Once I get this back up, I'll probably buy a new battery for each phone.
So it appears that I must have upgraded the bootloader to a point where towelroot no longer works as was previously suggested. I believe then that I need to follow the second guide to be able to downgrade to a rootable Lollipop version:
https://forum.xda-developers.com/ve.../guide-downgrade-to-kk-nk2-ncg-mm-lp-t3686858
I am downloading the PB1 rom and lolliroot and need to also get a system restore, kernel, and modem. As I said, my connection is terrible so it would be great if someone could suggest which version of restore I should go with. I was going to install Lollipop in the end (that was the original goal). I figured I'd just get OC4 since it's likely to have the least bugs and best performance. If that is a mistake and I should go with an earlier version of LL PLEASE throw it out there!
Click to expand...
Click to collapse
Here are some files (that I been hunting for about an hour for). Just gonna reference this for future use and anyone who comes across this thread. http://rootjunkysdl.com/files/?dir=Galaxy S5
Nice find!
I have the phone up and running on stock PB1 currently. I'm going to let it sit to see what the battery is like prior to rooting. While I haven't gotten it hooked back up to my account yet nor do I have it rooted, I feel pretty confident now that I'm on the right track. Thanks!
Just to finish out this topic, I have not successfully completed attaining root on 5.0. I flashed PB1 to the phone and then followed this guide for installing KingRoot:
https://androidforums.com/threads/root-question.1120150/
I got the lolliroot files from here:
https://www.androidfilehost.com/?fid=312968873555011514
Thanks to all who offered help!
Qyuck question... I've got my phone working well bow, but there's one issue with apps I'm not sure how to address. I want to use Verizon Visual Voicemail but I can't find it on the Play store. I disabled updates so I wouldn't get the marshmallow update and break root. but, with updates turned off, VVM won't get pushed. Any suggestions?

Categories

Resources