Over clock widget
Any one had any good or bad experiances.with.this.app
Sent from my SPH-D700 using XDA App
yea its pretty good if you have a.capable.kernel
yep, that's what I used when I had HTC Hero, worked great, and yes, u gotta have a compatible overclockable kernel.
haven't tried it with Epic yet, its fast enough for me so far.
Does it work with the mixup kernel
Sent from my SPH-D700 using XDA App
epicroot said:
Does it work with the mixup kernel
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
It will but it isn't really necessary as the kernel will scale up and down on its own. Running that widget is just one more service occupying memory.
The defaults on MixUp are set to default 1000 Mhz which is same as stock -- You will need SetCPU or overclock in order to boost your speeds to 1200 Mhz. I recommend SetCPU. When I was on hero had bad experience w/ overclock. Never once have I with SetCPU.
Argh! I stand corrected. Thanks for the heads up; I've got setcpu installed now.
Sent from my SPH-D700 using XDA App
Related
Hey guys just wanted to know what you think the best settings for this kernel are. Thanks
Sent from my SCH-I500 using XDA App
Leave everything in SetCPU the way it is unless you have issues with audio popping/cracking. Then adjust the minimum CPU speed to 200mhz.
Thank you! The kernel rocks btw.
Sent from my SCH-I500 using XDA App
Why is it that I can only overclock my droid x to 1.15 ghz and I see other people getting higher then I can? Am I doing something wrong? If possible, could I get some help please. Thank you.
Sent from my DROIDX using XDA App
Search jrummy16 in the market
Sent from my DROIDX using XDA App
I had this issue on my phone as well...the way I got my phone overclocked past this was to set the governor to anything other than the default (i think its ondemand.) i personally use the performance governor and have my phone overclocked to 1.65 GHz...hope this helps ya
Thanks bro, I now have over clocked my phone to 1.45 ghz, how does your phone run at 1.65 ghz? And how do you get it that high? I am running at ulv on the droid x overclocker, is that good or should I go to lv? I apreciate your help...
Josh
Sent from my DROIDX using XDA App
Wow, never got my phone that high. Highest I ever went was about 1.35.
Sent from my DROIDX using XDA App
joshw0000 said:
Wow, never got my phone that high. Highest I ever went was about 1.35.
Sent from my DROIDX using XDA App
Click to expand...
Click to collapse
+1 on 1.3-1.35....after that it actually starts slowing everything down, i just use LV 1.3 on boot, its too unstable at ulv or past 1.35
My phone is blazing fast and no slowing down for me....
Sent from my DROIDX using XDA App
just messed with the jrummy overclock app under advanced settings and found one my phone worked good on
What do you want most out of a kernel bypass, or a new kernel?
I figure that I want 1% battery increments lmao...I think Cyanogen is a given.
Want to know what y'all think...
Sent from my DROIDX using Tapatalk
Cyanogenmod! By far.... cause that would fix all the other probs I have with the DX
Sent from my DROIDX using XDA App
LoopDevices enabled so you can dual boot into ububtu
Overclocking unclocked the *real* way
1% battery increments
Kernal battery tweaks such as HAVS and new governors
Sent from my DROIDX using XDA App
Joe92T said:
LoopDevices enabled so you can dual boot into ububtu
Overclocking unclocked the *real* way
1% battery increments
Kernal battery tweaks such as HAVS and new governors
Sent from my DROIDX using XDA App
Click to expand...
Click to collapse
Drod2169 just incorporated some of the cm governors into rubix 2.0 and they work great... u should check them out
Sent from my DROIDX using XDA App
MIUI? or maybe cyanogen. idk really what they look like. definitely 1% increments. and sysadmin im going to flash it now. it sounds interesting.
SysAdmin-X said:
Drod2169 just incorporated some of the cm governors into rubix 2.0 and they work great... u should check them out
Sent from my DROIDX using XDA App
Click to expand...
Click to collapse
These new governors are also enabled in the new update of Droid Overclock!
Sent from my DROIDX using Tapatalk
The Minimalistic Text Widget allows for a particular widget design that display the 1% increments.
This is a shot of my lockscreen and the Battery Widget would be the descending numbers to the bottom right.
What governer do u use on cm7?
Sent from my Liberty using XDA App
I use smartass
Sent from my Liberty using XDA App
lilhaiti said:
I use smartass
Sent from my Liberty using XDA App
Click to expand...
Click to collapse
Is the battery life better than the stock way?
Sent from my Liberty using XDA App
Ive used on demand for the most part. I've been trying out Interactive the past couple days and it seems just a hair snappier. I haven't noticed a negative impact on battery either.
Sent from my cm7 Aria.
Javi97100 said:
Is the battery life better than the stock way?
Sent from my Liberty using XDA App
Click to expand...
Click to collapse
Smartass
You don't need profile for screen off 120-320 screen off 400-806(or whatever Max you have set) screen on scaling like interactive
Been good on battery life for me
Sent from my Liberty using XDA App
drowningchild said:
Smartass
You don't need profile for screen off 120-320 screen off 400-806(or whatever Max you have set) screen on scaling like interactive
Been good on battery life for me
Sent from my Liberty using XDA App
Click to expand...
Click to collapse
what do all the interactive, userspace, and conservative do? i get the other ones.
I'm going to try smartass. I've turned off screen off profile on setpcu. Since yesterday I was using interactive 120/78?. Not bad, the battery life been pretty good to me.
Sent from my Liberty using XDA Premium App
foreverzero89 said:
what do all the interactive, userspace, and conservative do? i get the other ones.
Click to expand...
Click to collapse
Governors Explanation
Which ROMs are you using that have support for this new fangled smartass governor?
I'm currently running 7.0.0 with the stock kernel and I have access to all but smartass.
It's kernels, not ROMs, my friend.
Sent from my PC36100 using XDA App
Flash smartass over any cm7
Sent from my Liberty
Funkmon said:
It's kernels, not ROMs, my friend.
Click to expand...
Click to collapse
Right, I am aware of the difference. I was curious as to which ROMs people were using that included the kernel, I didn't realise everyone had specifically flashed a smartass kernel.
Thanks for the clarification.
There aren't any roms that include this kernel. You flash separately.
cm7 rc4 ladios, 6-7 kernel
Jimmeh83 said:
Right, I am aware of the difference. I was curious as to which ROMs people were using that included the kernel, I didn't realise everyone had specifically flashed a smartass kernel.
Thanks for the clarification.
Click to expand...
Click to collapse
I'm personally using drowningchilds 6-7 kernel, which has the smartass governor. The thread can be found in the aria development section
Sent from my cm7 Aria.
Drowningchild has a kernel for CM7 and one for Liberated. I use CM7 with the 6-7 kernel on smartass governor overclocked at 320-787.
On a side note, I did take the advice from drowningchild's kernel thread and it has proven to work: if you flash the kernel, do not flash the GPS old libs, as it will make your CPU usage skyrocket and you'll get horrible battery life.
Sent from my Liberty using XDA App
lsusparky621 said:
Drowningchild has a kernel for CM7 and one for Liberated. I use CM7 with the 6-7 kernel on smartass governor overclocked at 320-787.
On a side note, I did take the advice from drowningchild's kernel thread and it has proven to work: if you flash the kernel, do not flash the GPS old libs, as it will make your CPU usage skyrocket and you'll get horrible battery life.
Sent from my Liberty using XDA App
Click to expand...
Click to collapse
its the gps libs period that cause errors
and i have no liberated kernel built
My apologies
Sent from my Liberty using XDA App
Can you OC MIUI ROm like the other ASOP roms cm7, decks ect?
Yup. Just flash a kernel.
I flashed the salvage zen but I still dont see an area to change CPU settings? Its not like the dragons ahead menu =()
Pivo187 said:
I flashed the salvage zen but I still dont see an area to change CPU settings? Its not like the dragons ahead menu =()
Click to expand...
Click to collapse
You have to use setcpu its available in the market
Sent from my PC36100 using XDA App
Nofrills also works well and its free.
Sent from my PC36100 using XDA App