Hey guys just wanted to know what you think the best settings for this kernel are. Thanks
Sent from my SCH-I500 using XDA App
Leave everything in SetCPU the way it is unless you have issues with audio popping/cracking. Then adjust the minimum CPU speed to 200mhz.
Thank you! The kernel rocks btw.
Sent from my SCH-I500 using XDA App
Related
Over clock widget
Any one had any good or bad experiances.with.this.app
Sent from my SPH-D700 using XDA App
yea its pretty good if you have a.capable.kernel
yep, that's what I used when I had HTC Hero, worked great, and yes, u gotta have a compatible overclockable kernel.
haven't tried it with Epic yet, its fast enough for me so far.
Does it work with the mixup kernel
Sent from my SPH-D700 using XDA App
epicroot said:
Does it work with the mixup kernel
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
It will but it isn't really necessary as the kernel will scale up and down on its own. Running that widget is just one more service occupying memory.
The defaults on MixUp are set to default 1000 Mhz which is same as stock -- You will need SetCPU or overclock in order to boost your speeds to 1200 Mhz. I recommend SetCPU. When I was on hero had bad experience w/ overclock. Never once have I with SetCPU.
Argh! I stand corrected. Thanks for the heads up; I've got setcpu installed now.
Sent from my SPH-D700 using XDA App
Why is it that I can only overclock my droid x to 1.15 ghz and I see other people getting higher then I can? Am I doing something wrong? If possible, could I get some help please. Thank you.
Sent from my DROIDX using XDA App
Search jrummy16 in the market
Sent from my DROIDX using XDA App
I had this issue on my phone as well...the way I got my phone overclocked past this was to set the governor to anything other than the default (i think its ondemand.) i personally use the performance governor and have my phone overclocked to 1.65 GHz...hope this helps ya
Thanks bro, I now have over clocked my phone to 1.45 ghz, how does your phone run at 1.65 ghz? And how do you get it that high? I am running at ulv on the droid x overclocker, is that good or should I go to lv? I apreciate your help...
Josh
Sent from my DROIDX using XDA App
Wow, never got my phone that high. Highest I ever went was about 1.35.
Sent from my DROIDX using XDA App
joshw0000 said:
Wow, never got my phone that high. Highest I ever went was about 1.35.
Sent from my DROIDX using XDA App
Click to expand...
Click to collapse
+1 on 1.3-1.35....after that it actually starts slowing everything down, i just use LV 1.3 on boot, its too unstable at ulv or past 1.35
My phone is blazing fast and no slowing down for me....
Sent from my DROIDX using XDA App
just messed with the jrummy overclock app under advanced settings and found one my phone worked good on
Hey guys, so i have the seeArms JL2 Rom installed with the speed mod kernal.
So my question is. How do i set the values for the cpu boost. All the values have K's at the end not mhz or whatever lol so id like to know what the K's mean.
And also i follwed the instructions for the kernal and the rom so i enabled all the tweaks and lagfix options so thats all done but i just need to sort out the cpu boost values.
Hope this question makes sense.
And lastly with the lagfix whats the difference between the options ext 3 and 4. And with binds and without binds whats those all about
Thanks in advance
Sent from my GT-I9000M using XDA App
And whenever i set the cpu boost, the values dont stay, they keep going back to stock
Sent from my GT-I9000M using XDA App
wink4life said:
And whenever i set the cpu boost, the values dont stay, they keep going back to stock
Sent from my GT-I9000M using XDA App
Click to expand...
Click to collapse
How about reading forum rules + reading original post of speedmode + posting in actual speedmode kernel topic?
Sure i will do that Sir. Thanks for the tip
Sent from my GT-I9000M using XDA App
What governer do u use on cm7?
Sent from my Liberty using XDA App
I use smartass
Sent from my Liberty using XDA App
lilhaiti said:
I use smartass
Sent from my Liberty using XDA App
Click to expand...
Click to collapse
Is the battery life better than the stock way?
Sent from my Liberty using XDA App
Ive used on demand for the most part. I've been trying out Interactive the past couple days and it seems just a hair snappier. I haven't noticed a negative impact on battery either.
Sent from my cm7 Aria.
Javi97100 said:
Is the battery life better than the stock way?
Sent from my Liberty using XDA App
Click to expand...
Click to collapse
Smartass
You don't need profile for screen off 120-320 screen off 400-806(or whatever Max you have set) screen on scaling like interactive
Been good on battery life for me
Sent from my Liberty using XDA App
drowningchild said:
Smartass
You don't need profile for screen off 120-320 screen off 400-806(or whatever Max you have set) screen on scaling like interactive
Been good on battery life for me
Sent from my Liberty using XDA App
Click to expand...
Click to collapse
what do all the interactive, userspace, and conservative do? i get the other ones.
I'm going to try smartass. I've turned off screen off profile on setpcu. Since yesterday I was using interactive 120/78?. Not bad, the battery life been pretty good to me.
Sent from my Liberty using XDA Premium App
foreverzero89 said:
what do all the interactive, userspace, and conservative do? i get the other ones.
Click to expand...
Click to collapse
Governors Explanation
Which ROMs are you using that have support for this new fangled smartass governor?
I'm currently running 7.0.0 with the stock kernel and I have access to all but smartass.
It's kernels, not ROMs, my friend.
Sent from my PC36100 using XDA App
Flash smartass over any cm7
Sent from my Liberty
Funkmon said:
It's kernels, not ROMs, my friend.
Click to expand...
Click to collapse
Right, I am aware of the difference. I was curious as to which ROMs people were using that included the kernel, I didn't realise everyone had specifically flashed a smartass kernel.
Thanks for the clarification.
There aren't any roms that include this kernel. You flash separately.
cm7 rc4 ladios, 6-7 kernel
Jimmeh83 said:
Right, I am aware of the difference. I was curious as to which ROMs people were using that included the kernel, I didn't realise everyone had specifically flashed a smartass kernel.
Thanks for the clarification.
Click to expand...
Click to collapse
I'm personally using drowningchilds 6-7 kernel, which has the smartass governor. The thread can be found in the aria development section
Sent from my cm7 Aria.
Drowningchild has a kernel for CM7 and one for Liberated. I use CM7 with the 6-7 kernel on smartass governor overclocked at 320-787.
On a side note, I did take the advice from drowningchild's kernel thread and it has proven to work: if you flash the kernel, do not flash the GPS old libs, as it will make your CPU usage skyrocket and you'll get horrible battery life.
Sent from my Liberty using XDA App
lsusparky621 said:
Drowningchild has a kernel for CM7 and one for Liberated. I use CM7 with the 6-7 kernel on smartass governor overclocked at 320-787.
On a side note, I did take the advice from drowningchild's kernel thread and it has proven to work: if you flash the kernel, do not flash the GPS old libs, as it will make your CPU usage skyrocket and you'll get horrible battery life.
Sent from my Liberty using XDA App
Click to expand...
Click to collapse
its the gps libs period that cause errors
and i have no liberated kernel built
My apologies
Sent from my Liberty using XDA App
i recently rooted my wildfire and have installed cyanogenmod 7.0.3 and wanted to double check something, ive been looking around threads and these overclocking guides and i saw that one of them said you only need a kernel with the ability to overclock if you are on stock rom, otherwise you can install setcpu straight away and overclock, could someone please just clarify this, thanks
Cm7 has overclock built in so no need for additional kernal or setcpu app
Go to Settings > Cyanogenmod settings > performance > CPU settings
It's basically setcpu built in
Sent from my HTC Wildfire using XDA Premium App
Eddster3000 said:
Cm7 has overclock built in so no need for additional kernal or setcpu app
Go to Settings > Cyanogenmod settings > performance > CPU settings
It's basically setcpu built in
Sent from my HTC Wildfire using XDA Premium App
Click to expand...
Click to collapse
thanks, i gave it a go but every time i boot it always restores itself to 528, how can i set it to stick at a certain speed? thanks
deezykhara said:
thanks, i gave it a go but every time i boot it always restores itself to 528, how can i set it to stick at a certain speed? thanks
Click to expand...
Click to collapse
There is a check box that says something like " set at boot" tick this and it will retain your settings
Sent from my HTC Wildfire using XDA Premium App
Also Smartass Governor is very good. Its interactive so manages CPU when required or when your handset is idle
Sent from my HTC Wildfire using XDA Premium App
Eddster3000 said:
Also Smartass Governor is very good. Its interactive so manages CPU when required or when your handset is idle
Sent from my HTC Wildfire using XDA Premium App
Click to expand...
Click to collapse
so does this mean it wont affect battery too much as it will automatically reduce the speed and increase it when required, also what speeds would you recommend for min and max?
deezykhara said:
so does this mean it wont affect battery too much as it will automatically reduce the speed and increase it when required, also what speeds would you recommend for min and max?
Click to expand...
Click to collapse
Yeah, as far as I know it caps min setting to 352 when idle/sleep even if you have yours min set higher than that. It then uses required CPU up to your Max depending on what processes are taking place.
Overclocking will effect battery life if you push it to far. I currently have mine set at 352/691 and it works for me giving speed and battery life.
Experiment your own tho
Sent from my HTC Wildfire using XDA Premium App
thanks again for all your help