Database Users

Cant connect hd2 to computer!!

this is my problem,
when i connect my hd2 it charges but the computer doesn't recognize it. on the phone settings it is set to active sync. i also have 2 computers; xp and vista, both do the same thing.
i could careless about active sync, i just want to plug my phone into my pc and transfer files in and out. ive also tried the disk drive option but still no go?
if i enter bootloader and plug it in it recognizes the usb setting but when the phone is normal, it doesn't??
it did this with the stock rom and its also doing this with nrg titanium rom.
any help would be appreciated

Same thing here.
It charges through USB but it doesnt connect.
If i choose the storage option it works fine.
I want to sync my outlook and i cant...
What the heck...?

i know this may seem a bit "it helpdesk-ish" but try re-booting your PC

Come on... give something drastic!
Already done that, rebooted the pc and the hd2...
still nothing

djchubbs said:
i know this may seem a bit "it helpdesk-ish" but try re-booting your PC
Click to expand...
Click to collapse
believe it or not i have done that mannyy times and did alot of device manager things to try and let both computers recognize the hd2 but still nothing haha..
ive had previous hd2's and they've all connected fine untill this one, maybe its this specific one thats giving me trouble. but regardless, it charges via usb then it should be able to recognize it

Check the active sync settings to ensure that usb connections are enabled. You can tell be looking at the system tray icon - there's a read circle with a white X in it if USB is disabled.
Saying that though, if it doesn't even recognise it when the device is in USB mode, I'd try a different cable. It's perfectly reasonable that the cable could power the device but not fully facilitate a USB connection.

johncmolyneux said:
Check the active sync settings to ensure that usb connections are enabled. You can tell be looking at the system tray icon - there's a read circle with a white X in it if USB is disabled.
Saying that though, if it doesn't even recognise it when the device is in USB mode, I'd try a different cable. It's perfectly reasonable that the cable could power the device but not fully facilitate a USB connection.
Click to expand...
Click to collapse
but the thing is when i go into bootloader it recognizes it as usb and i can add customs roms and such. just not when the phone is normal weird ?

k20a1 said:
but the thing is when i go into bootloader it recognizes it as usb and i can add customs roms and such. just not when the phone is normal weird ?
Click to expand...
Click to collapse
That is very weird. Sorry mate - never heard of it doing that for anyone before.

Make sure you have the mobility center/active sync program installed on your computer. Without it it won't work.
On Vista or Seven, with the HD2 plugged in, you can find the program/drivers by launching and refreshing manually Windows Update. On XP you have to do that manually.
Good luck.

This happens to me often. In my case I have found it to be a weird driver issue. Go to device manager and look for the yellow triangle. Right click and update driver software. This worked for me I hope it helps.

bit late but just flashed maxsence and i love the look, but have allready had to restart by phone 10 times in 10 minutes. I'll wait for the next release. back to GTX for now.
Good work NRG. keep it up.

this is one of the many WM6.5 errors!
need Android soon!

Ok here we go.
The phone did not connect through activesync to my pc. When i selected to connect as mass storage it connected.
I checked for driver issues in device manager but nothing came up.
I checked the hd2's activesync. Bingo! the activesync was crashing when i was running it. I had to hard reset the phone.
Now it works fine.
My guess is that maybe a program that i installed recently was buggy and created this particular problem. Unfortunately i have about 50+ programs installed (including themes etc) and i m not sure which one it was.
I was installing all the programs again today one by one and after the install process was completed i connected the hd2 to usb to find which app was the problematic one.
After installing almost(some were found useless) all of the apps (here is the crazy part) the hd2 still was connecting through activesync....
HTC will drive me nuts...
Anyway the phone now connects correctly.
I cant understand which was the problem....

as odd as it may sound i think i figured it out.
i think its the usb cable that im using, i have to wiggle it around for it to connect to active sync but once it connects its not a stable connection as it cuts in and out.
but charging capabilities work though!
pos wire, i ordered a new wire and if that one fails also, i will have to get my hd2 replaced for faulty usb port
thanks for all the replies much appreciated

@k20a1
Try to hard reset the phone.
It worked for me.
If not again, then use your warranty!

angelossssss said:
@k20a1
Try to hard reset the phone.
It worked for me.
If not again, then use your warranty!
Click to expand...
Click to collapse
i did whenever i custom rom'd it, it still does the same thing. yes it will connect via usb while in bootloader but will not during regular phone operations lol

"Disk drive" mode not working with XP laptop
HD2 is working fine with my desktop, but wit laptop I can only use ActiveSync to browse files.
When I connect the USB cable I get:
"Found new hardware wizard"
but it tells me that it Cannot Install This Harware - Disk Drive
"An error occurred during the installation of the devie The system cannot find the file specified"
And I only have "Finish" to click - if I click it the wizard lunces again immediately and goes on and on with no end.
HD"/Leo does not appare in Disk Manager (I know ablut the drive lettering issue)
I'm sure its my XP issue, but I havent found drivers to fix that, and I'm not about to reinstall XP on my lappy in near future.

Transfer files - Solved
;
k20a1 said:
this is my problem,
when i connect my hd2 it charges but the computer doesn't recognize it. on the phone settings it is set to active sync. i also have 2 computers; xp and vista, both do the same thing.
i could careless about active sync, i just want to plug my phone into my pc and transfer files in and out. ive also tried the disk drive option but still no go?
if i enter bootloader and plug it in it recognizes the usb setting but when the phone is normal, it doesn't??
it did this with the stock rom and its also doing this with nrg titanium rom.
any help would be appreciated
Click to expand...
Click to collapse
I share the same here and I was despaired of trying to solve it with any logical, as well with illogical, measures. Such as: rebooting, changing usb cables, reinstalling activesync 4.5, etc.....etc...blla..blla...blla...
However, I solved the "Transfer files issue" by taking out the sd card from the HD2 and connect it with an external cards reader to my pc.
The card reader connected and works with the same usb cable that does not work with the HD2.
That way I load it with all files and in the same occasion I reload into my computer the daily spb backup files.
However, I have the feeling that the reason for that problem is a missing file/driver named: "Setup1.SPL" in the pc windows operating system.
In order to solve that it seems that only reinstalling windows on my pc will be the solution which defiantly do not like.

USB on PC not working.. tried everything in threads..

So I can't get my desktop OR laptop running XP Pro 32 to even recognize the phone. As in no audio plays and nothing appears in the system tray. Tried with/without debugging mode, installed the samsung drivers etc. The phone doesn't even show up in device manager at all- not even as something unrecognizable. Its as if the port is dead. The phone does 'ding' though and charge ok so it is receiving power... though nothing at all appears in the android notification tab when connected. Any ideas or anyone know of any apps on the pc or android side to take a closer look at whats happening on the bus?

The only way that I can get it to work is to put it in media mode. It shows up as a media device in Win7. If I put it on, "ask every time" or whatever it doesn't work and in mass storage mode it shows up as two unreadable drives, they are grayed out in Explorer... Basically...don't use the "ask every time" for USB function.
This function seems like such a simple thing, not sure why Samsung has so many issues with it considering they have been making media devices for a long time.
Anyway... do you have access to a newer OS to at least rule that out as a cause. Not saying it shouldn't work with XP 32 but just something to check out.

I was having similar issues at first. I take it adb doesn't work either? Well my fix was to delete my whole Android SDK folder, then I redownloaded it (though I just kept the "tools" folder this time). Then I downloaded "USBDeview" (google it) to delete every USB driver that had to do with android (basically just left the printers, HID, and my Sansa drivers), restarted, then I downloaded the samsung drivers from the thread on here, plugged my phone in and manually pointed the driver search to the drivers.
ADB and Mass Storage has been working fine since. All I can tell you is to keep checking cause there's something you're missing, I also thought to myself "what the heck else can I do?" since I had done each one of those steps previously, but maybe I just had to do them all together. Good luck.

another possible solution is to change cables if you're not using the samsung provided cable - some cables are charger only (no data) - some of the motorola cables are charger only and we've already had one poster that had that issue

I couldn't get it to work at first either. I more or less did this.
I plugged in my phone. I did not enable mass storage mode on my phone. Walked away and let my PC think for a while. I came back and I noticed I had two new drives. I then enabled mass storage mode and could connect.
Two of my machines I had to do this. I'm not sure why it wasn't instant, but it just took a bit of patience and walking away from the machine to let it think for a while before I guess it installed the drivers and made its peace with the fact it wasn't the G1 any more.

Say into voice dialer "Open SD card" -> check "Enable USB mass storage". That works if port on PC is OK.

If it's a driver issue, open device manager and uninstall the usb ports. Unplug everything from usb and when you reboot the computer it will automatically reinstall the usb ports.
Sent from my Vibrant

I ran into the same issue. It was a problem with the USB cable I was using. As soon as I tried a different cable it worked fine.

larryccf said:
another possible solution is to change cables if you're not using the samsung provided cable - some cables are charger only (no data) - some of the motorola cables are charger only and we've already had one poster that had that issue
Click to expand...
Click to collapse
I second this, I forgot my sammy cable at work on Friday and on way home stopped at T-Mo and picked up a charger w/cable and realized right away this was just a charging cable as soon as I connected it to my PC. I'm returning the cable back to T-Mo tonight. At least I was able to charge my phone over the weekend.

UPDATE: You guys are right, it is the goddamn cables! I bought an extra wall charger + cable at the t-mobile store and was using that at home. I had left the original in-box cable at work. Tried the cable at work today and now the drives pop up. Still don't appear writeable but I can look into that when I have time, probably the typical driver issue. As far as I can tell those separate cables are power only! $15 for a two wires + dc adapter. Thanks Samsung. Grr.

i suspect the mfgrs have gone to charge only cables to help keep folks from tethering - just a suspicion
if the "drives" are popping up, have you "mounted" the phone (pull down notification bar, clik on USB connected and it should give you a window asking to mount the cards or drive)

FYI....The Rocketfish cables you get from Best Buy do not work. They are only capable of charging.
@larryccf...I don't think certain manufacturers are implementing this on purpose so we can't tether. I think their just being cheap.

Where I got my cables on the cheap! and my problem.
I got my cable at monoprice.com. Check it out that is a 10 foot usb cable for $1.69 and it works for me. They have different lengths and even some colors. Now my Mass Storage issue . . .
My Mass Storage via USB works fine unless I enable "USB Debugging" which one of my apps needs to work. Once debugging is enabled I loss the ability to see my sd card and internal storage on my XP netbook. any ideas????

Same Problem
I have the exact issue, tried many things have'nt found a fix yet. Any help would be greatly appreciated!!!
Thanks,
crx

larryccf said:
if the "drives" are popping up, have you "mounted" the phone (pull down notification bar, clik on USB connected and it should give you a window asking to mount the cards or drive)
Click to expand...
Click to collapse
this worked for me Thanks

Yes phone is mounted, and can be seen w/o usb debugging enabled. However with usb/debugging on it does not read the phone being connected. Meaning that I cannot connect to ADB which is my main concern.
thanks for response tho,
crx

crxforya said:
Yes phone is mounted, and can be seen w/o usb debugging enabled. However with usb/debugging on it does not read the phone being connected. Meaning that I cannot connect to ADB which is my main concern.
thanks for response tho,
crx
Click to expand...
Click to collapse
This is my issue exactly, and I haven't found a fix either. Called T-Mobile and they thought turning off debugging was the only fix I needed.

Most of them, sorry to say are half retarded. They think a data reset is the cure-all

crxforya said:
Most of them, sorry to say are half retarded. They think a data reset is the cure-all
Click to expand...
Click to collapse
Ain't that the truth!

If you are running windows (x86 or x64), it would be wise to install the samsung drivers. I was having this exact problem, but as soon as I installed the drivers from samsung, viola!
I had the latest drivers from google, and they did not work for me.
Here is a link to the thread containing the links to the drivers, thanks to TGA_Gunnman:
http://forum.xda-developers.com/showthread.php?t=728929

PC doesn't sync with Vibrant... help needed

I hook up my Vibrant to my PC and nothing happens. The phone starts charging but I never get a prompt on my computer or sound notification that something has been mounted.
I go to my computer and see nothing of an external hardware source being plugged in.
I want to root my phone but I can't seem to get my Vibrant to show up on my computer. My MyTouch Slide had no problem. Suggestions?
I've already tried changing the USB drive settings...

I am not near my computer right now, so maybe someone more experienced can give you precise advice, but what I did for my PC (XP Pro) is download the Samsung USB Driver, install it, and only then the PC would recognize the phone.
Also, after your phone is recognized, you still have to mount it as an external drive from the phone itself before it can work.

See this is why I hate windows. I spent the last half hour trying to figure out what was wrong with this. In the end, simply plugging the USB into a different port fixed everything.

Have the same issue here. One port works and one does not recognize the Vibrant no matter what I try.
Sent from my SGH-T959 using XDA App

Arcadia310 said:
See this is why I hate windows. I spent the last half hour trying to figure out what was wrong with this. In the end, simply plugging the USB into a different port fixed everything.
Click to expand...
Click to collapse
That's not a windows problem, you have an iffy USB port

Also, now that you have fixed your issue, why not just download the update.zip file directly to your phone, no need to use your pc.

[Q] Epic not mounting

I cannot get my epic to mount for ANYTHING! I factory wiped the phone, nope, I used a palm pre usb cable nope, I downloaded the official samsung drivers nope, I plugged the cable into the motherboard on the computer nope, I tried a different computer running windows 7, nope tried a laptop using windows vista, nope. Does anyone know ANY WAY POSSIBLE to get this thing to mount? I selected mass storage and dissabled and enabled usb debugging. Im just not having any luck. It seems that the computer recognizes the phone is connected just cant get to the files on the SD card.

I also spent many hours trying to figure out what the hell was wrong with my Epic, that is, why it would come up as a "malfunction" in Windows when I plugged the USB cable in.
I tried drivers, different restore points, wiping, etc. etc. etc.
To the point... Try a new USB cable. The one packaged with the Epic is junk. As a matter of fact, it worked several times before it crapped out. I have no idea why, but I picked up a new micro USB cable, plugged it in, and the phone was then immediately recognized by my computer to allow mass storage mount.
People who tried the Palm Pre USB cable also had issues for some reason.
IMO, there should be a sticky posted in this board regarding the packaged USB cable, as I encounter this issue quite a bit.

Ok I'll try to find a new one really quick thanks

ugh tried an HTC Mytouch 4g usb cable and that didnt work either. Gonna try a class 4 usb stick and im gonna try puttting all of the files on the computer from the SD card
Edit: Oh wow i cant put the files on the computer duh
Edit: Ok now I'm mad a Class 4 SD card wont connect to the computer thru the epic ughhhh

I'm guessing during this time, you've rebooted the computer a few times? Sometimes, that's all it takes...
Try uninstalling ALL of the USB drivers associated with the Epic, rebooting the computer, then connecting (with debug mode OFF). Windows found and installed the USB drivers for me in just a few seconds when I did this [with the new cable, the first time].
- G

Have u enabled development mode under settings > applications (in your) epic? If not, try that, then plug in cable.
Then pull down the notification bar and it'll give you back the option.. again, if you haven't tried this.

On occasion I have troubles with the Epic mounting/ejecting on a Mac, but the only time I've ever had an issue with it mounting on a PC a different cable solved the problem immediately.

Try a different USB port on your PC. If that doesn't work, try rebooting the PC and the phone.
I had luck with trying different usb ports though

I had this problem as well and:
1. Tried 4 different cables
2. Tried all 4 on all 4 different USB ports
3. Rebooted numerous times
4. Uninstalled/reinstalled drivers
5. Tried 3 different PCs (1 other running 7 and another running Vista)
6. Did 1-4 on all three computers.
OH! and the reason I was so adamant about finding a solution was that I was stuck in Clockwork... due to having messed up an EXT4/RFS/CW2.5/CW3.0 installation... It was MY fault... I screwed up.
The problem was I had been living with the nonmounting problem by simply putting my MicroSD into an adapter and plugging it into my Laptop for file transfers... never expecting to HAVE to ODIN at some time...
Anyway... I ended up coughing up the $100 to Insurance and replacing the phone.
HERE IS MY THEORY: I think what my problem was was that the USB port on the Phone was messed up. I think these USB ports are possibly a hardware fail point and the changing of cables has been a patch on the issue with the port... NOT the cables themselves!
I'm not suggesting that you are there yet since it sounds like you can at least still get the phone to boot up (and aren't stuck in CW) and could still use a work around of putting files on the MicroSD with an adapter...
But I would suggest you don't be as stupid as me and get yourself in a position where ODIN is your only hope.

Yeah, it sounded like a bad USB port to me. Also, FYIY, if you ever have to replace the phone through insurance, tell them that the phone was lost. Either way, it will cost you $100.00 to get a replacement and when it's reported as lost, they will also send you a new battery...

OregonLAN said:
Yeah, it sounded like a bad USB port to me. Also, FYIY, if you ever have to replace the phone through insurance, tell them that the phone was lost. Either way, it will cost you $100.00 to get a replacement and when it's reported as lost, they will also send you a new battery...
Click to expand...
Click to collapse
You don't really think that I sent in a phone that was stuck in CW do you? I don't think that would have worked too well for me.....
Cheers!

Did you end up doing an ODIN restore

Computer not detecting phone through USB at all!

Argh, I am pulling my hair out trying to solve this! When I connect my phone through USB to my computer my phone detects the connection but my computer doesn't respond at all! I bought the phone used and it is already rooted but is using a pretty old rom and I wanted to upgrade it. It is currently running "Kernel version: 2.6.32.9 [email protected] #4".
Things I have tried:
Using different USB settings on the phone (Kies, mass storage, ask on connection)
USB debugging mode
Different USB cables
Different computers
Cleaning the micro usb port on the phone
Formatting SD card
wide data/factory reset
Nothing seems to accomplish anything, it still reacts in the same way.
Any help would be greatly appreciated!

The ROM shouldn't count.
First of all, has it ever worked? I just presume you're running on win7: did you installed the drivers as specified in several different tutorials on this forum?
What kind of connection are you trying to establish? tether, usb, kies, other? have you tried any combination possible?

I just got the phone a couple days ago, I have not managed to get it to be detected by anything yet. I have tried it on a couple Win 7 boxes and also a Vista laptop. I am currently downloading Ubuntu just to rule out the OS factor. I have just been using Kies to install drivers although after reading your post I found this thread:
http://forum.xda-developers.com/showthread.php?t=961956
I'll try that and post results if that is what you mean? I have been trying to establish basically any connection at all for the ultimate goal of getting Odin to actually detect the phone so I can flash it with ClockworkMod Recovery and then an ICS rom. The phone detects the USB cable fine and starts charging and puts the phone into whatever mode I want (kies, mass storage, etc.) but the computer has yet to give any indication that anything is connected to it.

Try with the drivers, but be also sure to enable usb debugging to be able to select a different usb sharing when inserting the cable in case you haven't already.

The drivers installation didn't make any difference and I've tried USB debugging and all 3 connection modes (Kies, mass storage and media player), none of which exhibit any response from the PC.
Edit: Posting from Ubuntu now, same exact thing. Phone detects USB connection, and it doesn't matter which of the connection options I choose as the PC doesn't give any indication that anything has been connected to it.

That's really weird. Does Odin3 (which presumably works at a lower level) sees anything if you put the phone in download mode? ) this way you should be probably able to upgrade somehow.
Sent from my galaxys using XDA App

No unfortunately there is no response from the computer or Odin3 when the phone is in download mode and connected through USB.

that's odd and maybe that's not good at all.
I'm starting to think the problem could be hardware related, especially in a situation where odin can't see the phone in download mode (i.e. no software layer is interfering).
Is there any glaring damage/scratch/missing parts on the usb port?
Sincerely, if I could return it I would try that at this point.
Unless someone else has got anything else to try.

I'll take a good look at it under a scope when I go to work on Monday I guess. Thanks for your input, I'll try to update if I find out anything else!

So I took a look at the port under a scope today and discovered that one of the pins (the middle one) in the micro usb port on the phone seems to be completely gone! Not sure what each pin does but I'm assuming that one is probably used to communicate to whatever the phone is connected to...
Luckily I have access to a parts phone that I can take apart for a replacement port so probably tomorrow I will attempt surgery on the phone! Will report back with further progress after I have done so.

Well I'm happy to report that that was definitely the problem! I replaced the micro USB port on the phone today during my lunch break, put the phone back together and plugged it into a PC here. It immediately detected the phone so I'm pretty happy! Guess I'll be trying out some ICS roms tonight when I get home!

that's great, glad you managed you fix this yourself, well done and enjoy your SGS