Htc Hero 6250 screen is acting up?! - Hero CDMA General

Well for some reason, at random times, when I press on my screen the notification bar will drop down. This gets annoying because It won't allow me to do anything. For example, if I were to bring up google and type something, each letter I try to type the notification bar will drop! ugh.. what could be causing this problem? is it the screen needed to be replace? any advice?
also I have to hold the phone in a upright angle in order for it to work properly. If I leave it,for example, flat on the table it won't really pick up anything I push. But as soon as I lift it up and tilt it, works fine.

I kinda have the same prob but mine will type different letters then i push and will even take overat times but I think mine has to do with the bad seal I got cause I have one of the first model's
Sent from my HERO200 using XDA App

Screen covers often times will cause this. Happened to me every few days when I had one. And fyi, I'm a mechanic, not had a screen protector in months, and no scratches. This screen is pretty resilient.
Sent from my HERO200 using XDA App

I too have the first model however is there a fix for this?

EclipseTouchPro said:
I too have the first model however is there a fix for this?
Click to expand...
Click to collapse
Well it could be a lose connection for you with having to hold it a certain way
Sent from my HERO200 using XDA App

rulyskull said:
Well it could be a lose connection for you with having to hold it a certain way
Sent from my HERO200 using XDA App
Click to expand...
Click to collapse
know of a step by step how to fix it? but before I do anything like that, how can I tell if I'm still under the 1 year manufacture warranty, I got this phone from private seller at a low price.

EclipseTouchPro said:
know of a step by step how to fix it? but before I do anything like that, how can I tell if I'm still under the 1 year manufacture warranty, I got this phone from private seller at a low price.
Click to expand...
Click to collapse
Call sprint
Sent from my HERO200 using XDA App

Mine did this over time eventually my touch screen just gave out and i had to go get a refurbished one

I am having the same issue with Sprint Hero CDMA. I tried clearing all factory settings, delvick cache, and anything else I could find to clear in recovery. I then used a RUU to clear it completely back to factory, still no luck. I noticed that what it is actually doing is for some reason it is sensing the touch only at the top. I figured this out while playing 'alchemy classic'. If i tried to touch any of the top icons, (for those that do not play it, these are in the same are of the notification bar) it wouldn't work. When it stopped letting me move the elements around, if i clicked anywhere below one of the top icons, it would select the icon above it, regardless of how far down on the screen I touched. I will be going to the sprint store to have them look at it, hopefully they will have decent news.

Related

Bad spot on screen

Well, I got off work this morning and started texting my girlfriend. I noticed that the "d" wouldn't register when I pressed it on the horizontal keyboard. I thought it was wired so i wiped everything, changed to 3 different kernels and nothing has worked. I haven't dropped the phone that I can remember anyways. What could it be. It's in the same spot regardless of being in horizontal or verticle. Could it be hardware?
I would try your backup ROM and see if that works. It's worth a try I guess.
ejdavis72 said:
I would try my backup ROM and see if that works.
Click to expand...
Click to collapse
Huh?
Your back up Rom?
He may not be using a custom rom
Sent from my Incredible using XDA App
Im guessing that it is def a hardware issue. Any idea what it could be or where I can find the correct part?
Someones reported this happening when using a battery that doens't fit the phone perfectly. The EVO 1500 battery for example
Riley1524 said:
Im guessing that it is def a hardware issue. Any idea what it could be or where I can find the correct part?
Click to expand...
Click to collapse
verizon?
Sent from my ADR6300 using XDA App
It's a defect. Take it back to Verizon and they will replace it. I had that issue the day I got my original Incredible. They replaced it no questions asked, even with next day shipping while the back-order was still 3 weeks+. You will probably find that it is an entire horizontal row that won't register (when your phone is in portrait, vertical column if you are holding it in landscape). What I did was download a paint app to prove the issue to my verizon store. When you slide diagonally across the area it will get confused and either not paint or paint a vertical line across the area, very obvious.
Good luck!
nectur said:
It's a defect. Take it back to Verizon and they will replace it. I had that issue the day I got my original Incredible. They replaced it no questions asked, even with next day shipping while the back-order was still 3 weeks+. You will probably find that it is an entire horizontal row that won't register (when your phone is in portrait, vertical column if you are holding it in landscape). What I did was download a paint app to prove the issue to my verizon store. When you slide diagonally across the area it will get confused and either not paint or paint a vertical line across the area, very obvious.
Good luck!
Click to expand...
Click to collapse
Thanks for the reply!! I actually just bought a digitizer and I'm going to replace it myself. These phones are super easy to take apart and work on.

[Q] Dead (?) screen strip

all right. I've found various things about this on the web regarding other HTC phones, but I can't seem to find if anyone else has had this problem with their shift... This morning I realized that the "clear" button in the notification dropdown on CM7 wasn't working for me. I wrote it off as a weird bug. But then I tried to play angry birds, and I can't drag them back, they just fall right off the slingshot.
So I zoom in and I can pull the birds back, but when I get to this strip on the screen, they fly off without my picking my finger up.
Besides the clear button, screen presses generally seem to work, atleast when I'm selecting icons in landscape mode from my home screens. But the n1 style live wallpaper will respond to touches in this "strip" of screen by shooting off the lines around it instead of in it. Also, when I tried to drag to a different homescreen and stop in this strip, it will bounce back. same thing with notification bar. If I try to start dragging the screen from this "strip" I get no movement. The weird thing, of course is that this part of the screen isn't completey dead in terms of responding to touches, because it does register on my device that it is being touched, but drags, the notification menu clear button, the live wallpaper, and, of course, angry birds act funky when I use this part of the screen.
I guess I have to go back to sprint. I think I'm just going to flash a stock rom, but not unroot it.
I also don't have time, so I'm kind of just hoping it will go away.
ANYWAYS... anyone else having touchscreen issues with their HTC EVO shift?
PS: I think clocking my kernel at 800 instead of the 1200 I was using might have something to do with this?
Was running at 800 to preserve battery life, but back at 1200 after a nandroid restore and the problem seems fixed.
2 be clear, I had this issue on CM7 and MikFroyo, so I don't think it could be software related. But CPU clocking related.
Yeah, I also doubt that is the case.
My screen had a freek out. With out touching the screen it would open and close apps jump screens and when I touched the screen I would get no response at all. Had to RUU and send it in for a new phone it was in the connection with the screen. So the sooner you ask for a replacement the better.
Sent from my PG06100 using XDA App
did you just call? any tips? I'm wondering if I can handle this over the phone or not. Also - what did you do while you were waiting for the new phone to come in?
turns out it was the friggen screen protector. however, before I realized that I called my local repair shop and they said that they would be able to swap my phone out for a new/refurb one for $35. Too bad it isn't actually an issue, because I've noticed that the phone is a little less responsive to touch even with the screen protector off... it's just that its not clearly an issue at this point.
I actually had a similar issue with a replacement phone where the left side about 1/8" wouldn't respond (couldn't press q button on keyboard at all). After some research I found out about a great lil app to test screen touch response and any bad areas and it helped me diagnose that it in fact was the screen having a fault...look up "touch test" in the appstore and it should narrow down where and if your screen has a bad area that's not responding...it helped to get my in-store replacement in and out the store since I could show them the issue right away along side an in-store model. I hope this helps and I that I read the post correctly. Let me know if it helps you.
Sent from my PG06100 using XDA App
My screen had a dead line going across the middle of the screen but only when swiping side to side, for some reason vertically it was fine....
unrooted, went to sprint store repaired in less than 30 minutes...
onefasttreopro said:
I actually had a similar issue with a replacement phone where the left side about 1/8" wouldn't respond (couldn't press q button on keyboard at all). After some research I found out about a great lil app to test screen touch response and any bad areas and it helped me diagnose that it in fact was the screen having a fault...look up "touch test" in the appstore and it should narrow down where and if your screen has a bad area that's not responding...it helped to get my in-store replacement in and out the store since I could show them the issue right away along side an in-store model. I hope this helps and I that I read the post correctly. Let me know if it helps you.
Sent from my PG06100 using XDA App
Click to expand...
Click to collapse
Awesome tip, dude. This will help me get a replacement for sure. The issue came back and this is solid proof it exists. Gonna make it hard for anyone to pretend there isn't a problem. Thanks!
Sent from my PG06100 using XDA App
No problem...glad to help...it definitely saved me time...I installed it on my phone and the stores phone and compared them side by side...that way they can't give you a BS answer of "screen needs calibration" etc etc. Lemme know how it goes.
Sent from my PG06100 using XDA App
Sorry didn't respond faster. I just called them and they sent me a new phone next day and I sent them the old phone. Easy as pie no problems with the reps or the techs they didn't argue about it at all. It did take a long time on the phone because they were checking the phone settings no sure what this was but oh well. Just remember to ruu back.
Killer Shift
So they ended up still pretending that there wasn't an issue, saying that maybe it was just the touchtest app. It took a while to convince them that it wasn't just an app.. but after I left it with them for an hour (an hour where I'm sure they did nothin) I came back and showed them the issue again, compared it to the shift that they had, and they finally agreed to order me a refurb. A hassle, but a necessary one.
Sent from my PG06100 using XDA App
Sounds like they just hated looking bad and that you had proven them wrong so they put up a wall...nonetheless I'm glad it ended up working out and hope the replacement phone works out for ya...
Sent from my PG06100 using XDA App
onefasttreopro said:
so they put up a wall...
Sent from my PG06100 using XDA App
Click to expand...
Click to collapse
Agreed..It's awful how there is no set policies when it comes to service. Your fate pretty much rests with the tech you happen to get. Some are easy to get along with and some (obviously) aren't.
Sent from my PG06100 using XDA Premium App
The Refurb is great... oh, and FYI - don't use displex on touchscreens hahaha.

[Q] just purchased a g2 for $30. screen doesnt turn on

The phone definitely boots up because the lights on the buttons flash on then turn off after some time. The keyboard also lights up. You can tell the backlight turns on on the screen, but there is no picture.
Anyone have any idea about what I should do? Thinking about trying to restore to a stock Tom somehow tonight. Then I'm thinking about looking for screen replacements.
I was curious if anyone has had this issue before.
Update 07/14/11
So I got the screen and switched the old one out for the new one. This one also only has the backlight turning on, but I noticed when I put a part back on, there was a little bump in the middle of the phone. Haven't had a chance to fix it, but I noticed it's a piece hitting this rubber piece that seems to "transport" the sound for the mic from the bottom of the phone to the actual microphone module within the phone.
Removed that rubber piece, and I'll try installing it later. I was getting some blue and red visible in the middle of the phone. Anyone know what's wrong?
albanianbrotha said:
The phone definitely boots up because the lights on the buttons flash on then turn off after some time. The keyboard also lights up. You can tell the backlight turns on on the screen, but there is no picture.
Anyone have any idea about what I should do? Thinking about trying to restore to a stock Tom somehow tonight. Then I'm thinking about looking for screen replacements.
I was curious if anyone has had this issue before.
Click to expand...
Click to collapse
ebay for the parts and look around for the link for repairs. I don't exactly remember the link, but it's in one of the "spring replacement" threads. Good luck
mputtr said:
ebay for the parts and look around for the link for repairs. I don't exactly remember the link, but it's in one of the "spring replacement" threads. Good luck
Click to expand...
Click to collapse
How sure are you it's the LCD screen? Replacement screens cost more than what I bought the phone for...lol
it's mostly the physical connection to the screen.
and on your note about it costing more than what you bought the phone for... there are tons of parts on the phone that will cost more than 30bucks. not much you can do about that since you got it non fully functional.
mputtr said:
it's mostly the physical connection to the screen.
and on your note about it costing more than what you bought the phone for... there are tons of parts on the phone that will cost more than 30bucks. not much you can do about that since you got it non fully functional.
Click to expand...
Click to collapse
Sorry to be a both, but what exactly is the physical connection? Do I find it by opening the phone up completely to the point where I replace the actual LCD?
albanianbrotha said:
Sorry to be a both, but what exactly is the physical connection? Do I find it by opening the phone up completely to the point where I replace the actual LCD?
Click to expand...
Click to collapse
Never had to do it myself, but there is a cable connecting the two parts of the phone. That is usually where this problem originates from. It's not easy to fix though if your not familiar with fixing electronics from what i have seen.
xsteven77x said:
Never had to do it myself, but there is a cable connecting the two parts of the phone. That is usually where this problem originates from. It's not easy to fix though if your not familiar with fixing electronics from what i have seen.
Click to expand...
Click to collapse
I've taken apart my laptop completely and put it back together before. Completely as in taking the lcd off and different chips and wireless modules and stuff. I think it may be something I can handle. I'm going to take a look at it now. Restoring wont do me any good because not even the boot screen shows up.
albanianbrotha said:
Sorry to be a both, but what exactly is the physical connection? Do I find it by opening the phone up completely to the point where I replace the actual LCD?
Click to expand...
Click to collapse
It's pretty much a ribbon cable that feeds data to display and stuff. When you buy a spare screen, it usually comes with a connector
Sent from my Desire Z via XDA App
mputtr said:
It's pretty much a ribbon cable that feeds data to display and stuff. When you buy a spare screen, it usually comes with a connector
Sent from my Desire Z via XDA App
Click to expand...
Click to collapse
So I completely tore apart the phone, got to the point where if I had another LCD screen, I could have easily switched it out. But I don't, so I just put it all back together. I really hope this new LCD will fix the issue. I really hope it's not some other motherboard issue. If all else fails, it goes up on eBay for $70-$100 as is for the phone. If I fix it, I just got myself a phone that goes for $200 used for only $57.
sure. goodluck with it. if you can do it then you're all set. good luck
albanianbrotha said:
So I completely tore apart the phone, got to the point where if I had another LCD screen, I could have easily switched it out. But I don't, so I just put it all back together. I really hope this new LCD will fix the issue. I really hope it's not some other motherboard issue. If all else fails, it goes up on eBay for $70-$100 as is for the phone. If I fix it, I just got myself a phone that goes for $200 used for only $57.
Click to expand...
Click to collapse
Only $57? That would make the lcd screen $27 if u really paid $30 for the phone, but you said the screen was more than what u paid for the phone...so now im confused.
Sent from my HTC Vision using XDA Premium App
Got my fingers crossed for ya that your getting ur phone fixed over there
Sent from my HTC Vision using XDA Premium App
ptesmoke said:
Only $57? That would make the lcd screen $27 if u really paid $30 for the phone, but you said the screen was more than what u paid for the phone...so now im confused.
Sent from my HTC Vision using XDA Premium App
Click to expand...
Click to collapse
Sorry. After some searching on eBay, I found some sellers selling it for a few dollars less than 30, e.g. 27.
But I decided to go with a seller who sold more than 200, who claims the screen is an OEM screen, and who is top rated. He sells his for $32. Which makes my phone $62 after all is said and done.
The housing has some scratches on the top and bottom though, which decreases the value a bit, but hey, if it works I'll probably keep it as a backup. Currently have the HD2, but I got a Vibrant with original box and accessories for $100, so I think I'm going to sell the HD2.
That was kinda off topic, sorry
LCD screen should be here by the 13th.
Updated OP
someone help =|
I don't own a G2 but I still think this could be a similar issue to what we get over here on the HTC Droid Incredible. First, what makes you believe its still a screen issue if it lit but just didn't throw picture? Usually thats the symptom of having the wrong recovery version for the device hardware version. Normally for us what happens is we will get somebody who is new and rooting for the first time and they'll end up flashing the wrong recovery or freak out because they don't realize the root process takes a little while and yank the cord. End result being exactly what you've explained above. Phone starts but no screen. So we end up having them do the ruu or a second option which we call a "blind install" where you drop whatever your p file(ours is PB31IMG.zip) so whatever it is for the G2 drop that on the SD and reboot to hboot and do the update process by simply knowing how long to wait between key presses and what keys to hit without useing the screen. Its a unique process and all very magical. Haven't lost a single Inc yet because of this issue.
Anyways bud just a thought...
wildstang83 said:
I don't own a G2 but I still think this could be a similar issue to what we get over here on the HTC Droid Incredible. First, what makes you believe its still a screen issue if it lit but just didn't throw picture? Usually thats the symptom of having the wrong recovery version for the device hardware version. Normally for us what happens is we will get somebody who is new and rooting for the first time and they'll end up flashing the wrong recovery or freak out because they don't realize the root process takes a little while and yank the cord. End result being exactly what you've explained above. Phone starts but no screen. So we end up having them do the ruu or a second option which we call a "blind install" where you drop whatever your p file(ours is PB31IMG.zip) so whatever it is for the G2 drop that on the SD and reboot to hboot and do the update process by simply knowing how long to wait between key presses and what keys to hit without useing the screen. Its a unique process and all very magical. Haven't lost a single Inc yet because of this issue.
Anyways bud just a thought...
Click to expand...
Click to collapse
It doesn't seem to be a ROM issue.
Update 7/18: Sold the G2 on eBay and still made a good lump of money. I was very happy, until another G2 popped up with the same exact issue. Got it for a steal as well, and I tried the OEM screen I got from eBay, and it was still having issues, and it seems to cause the phone to overheat while charging. Definitely a defective screen and someones getting a great deal on a decent condition G2 because I already took the payment after I figured it was the screen I got.
I'm going to try to get a replacement from the guy that sold it to me on eBay, but I already left him positive feedback thinking it was the phone's fault.
Will update probably late July or early August when all of this gets sorted out.
TL;DR: bought 2nd g2 with same issue, turns out replacement screen didn't work in the 2nd g2, too late to not sell the first g2, getting another replacement screen to fix 2nd g2. First g2 was in better condition though =|
SWEEEEEEEEEEEEEEEEEEEEEEEEEEEET
Just installed the second screen that I ordered, and it works PERFECTLY. Phone is perfect nowwww yay. I can't use it right now though, previous owned put a lock pattern on the phone...
Wipe the system and the data and start over.
Sent from my HTC Vision using XDA Premium App
Gratz now a factory wipe and root with a new rom will make it run sweet.
Sent from my Desire Z via XDA App

[Q] Touchscreen Unresponsive after reboot menu

My touchscreen becomes unresponsive after holding down the power button to get to the Phone Options where the Silent mode, Airplane mode, Choose Profile, Screenshot, Reboot , and Power Off options are located. The touch screen becomes unresponsive, I have to power off the screen for a few seconds and turn it back on and the touch screen will work again. It just started doing this 2 weeks ago. I have tried different roms and no difference. I have performed task 29 no difference, even after fresh installation of roms with no other apps installed
Im suspecting a worn digitizer but not sure because it only does it after phone opentions menu is opened, other than that the touchscreen works fine. Than again not sure if its a rom issue because it does it with different roms even older ones i never had problems before. I just know how to flash roms and basic stuff and not that far advanced
By the way I have the latest MGLDR, and recovery, have performed task 29 and even tried it with the SD card out and same result
Any help would be greatly appriciated especially if you have had this exact problem please i want to hear from you
Thank you
Broken flat cable from digitizer to mainboard.I had the same problem.
Was it expensive to fix? Or did you fix it yourself? Did you replace the cable, digitizer or just the cable? And thanks for the help
Sent from my HD2 using xda premium
mvinceti said:
Broken flat cable from digitizer to mainboard.I had the same problem.
Click to expand...
Click to collapse
I think you mean broken flex cable from digitizer to lcd...
e334 said:
I think you mean broken flex cable from digitizer to lcd...
Click to expand...
Click to collapse
Sure he meant this, in order to make sense!
Solution: another touchscreen/digitizer or even better(but more expensive) new combo(lcd+touchscreen/digitizer)!
I have noticed that after it boots it will let me select an option from the the phone option menu but only when it is fresh of a boot, once the phone settles after a minute or two it's when the problem starts
For the meantime I'm using Quick Boot app from the market since that is the only thing it affects. I will check for prices to replace digitizer. I have seen the digitizers alone on Ebay going got around 10 bucks but I'm scared of the installation lol. I'm going to check the phone repair shop and check how they charge. If it's too much I'll just live with it since the Quick Boot app is working fine.
Thanks for the help guys, I really appreciate it and hopefully it can help somebody else with the exact problem
Sent from my HD2 using xda premium
Well took it to a local repair shop and guy told me the wires looked good and said maybe the motherboard was going out, well if it is guess I'll use my wife's Samsung Vibrant which I must say has never had any problems with, until its time for a contract renewal for me
Sent from my HD2 using xda premium
mexicandroid said:
My touchscreen becomes unresponsive after holding down the power button to get to the Phone Options where the Silent mode, Airplane mode, Choose Profile, Screenshot, Reboot , and Power Off options are located. The touch screen becomes unresponsive, I have to power off the screen for a few seconds and turn it back on and the touch screen will work again. It just started doing this 2 weeks ago. I have tried different roms and no difference. I have performed task 29 no difference, even after fresh installation of roms with no other apps installed
Im suspecting a worn digitizer but not sure because it only does it after phone opentions menu is opened, other than that the touchscreen works fine. Than again not sure if its a rom issue because it does it with different roms even older ones i never had problems before. I just know how to flash roms and basic stuff and not that far advanced
By the way I have the latest MGLDR, and recovery, have performed task 29 and even tried it with the SD card out and same result
Any help would be greatly appriciated especially if you have had this exact problem please i want to hear from you
Thank you
Click to expand...
Click to collapse
Me too
bib*oops said:
Sure he meant this, in order to make sense!
Solution: another touchscreen/digitizer or even better(but more expensive) new combo(lcd+touchscreen/digitizer)!
Click to expand...
Click to collapse
that's what I'm getting
mexicandroid said:
Well took it to a local repair shop and guy told me the wires looked good and said maybe the motherboard was going out, well if it is guess I'll use my wife's Samsung Vibrant which I must say has never had any problems with, until its time for a contract renewal for me
Sent from my HD2 using xda premium
Click to expand...
Click to collapse
I highly doubt the board is bad. I already took mine apart, a collection of dust and dirt causes the end button to mess up the contacts. Your board is probably fine if you aren't experiencing overheating or any other symptoms, no offence, he probably just wanted more work to do so they could charge you more. I've done some computer repairs for family and friends and it's ridiculous the bull that repair stores throw at you
Sent from my GT-I9100 using Tapatalk
elesbb said:
Me too
that's what I'm getting
I highly doubt the board is bad. I already took mine apart, a collection of dust and dirt causes the end button to mess up the contacts. Your board is probably fine if you aren't experiencing overheating or any other symptoms, no offence, he probably just wanted more work to do so they could charge you more. I've done some computer repairs for family and friends and it's ridiculous the bull that repair stores throw at you
Sent from my GT-I9100 using Tapatalk
Click to expand...
Click to collapse
I'm not experiencing overheating issues, the guy didn't charge and said he didn't have another motherboard to swap out with and test. He didn't charge me anything at least. I know its ridiculous how much they charge sometimes but its out of warranty so I don't have much choice and I'm scared to take it apart and damage something else but I have no other choice now lol. Did you look at a video before you took your apart?
Also was your phone doing the exact same thing? It does make sense it could be a dirty contact, I work ata Chevy dealer and bad contacts sometimes do weird things but sometimes at the lock screen the touch screen won't work also and I have to turn of t the screen for it to work
Sent from my HD2 using xda premium
mexicandroid said:
I'm not experiencing overheating issues, the guy didn't charge and said he didn't have another motherboard to swap out with and test. He didn't charge me anything at least. I know its ridiculous how much they charge sometimes but its out of warranty so I don't have much choice and I'm scared to take it apart and damage something else but I have no other choice now lol. Did you look at a video before you took your apart?
Also was your phone doing the exact same thing? It does make sense it could be a dirty contact, I work ata Chevy dealer and bad contacts sometimes do weird things but sometimes at the lock screen the touch screen won't work also and I have to turn of t the screen for it to work
Sent from my HD2 using xda premium
Click to expand...
Click to collapse
Yes exactly the same thing like 100 percent exactly. And yes I did the hardest part is getting the device out of the case lol the rest is quite simple.
Sent from my GT-I9100 using Tapatalk
elesbb said:
Yes exactly the same thing like 100 percent exactly. And yes I did the hardest part is getting the device out of the case lol the rest is quite simple.
Sent from my GT-I9100 using Tapatalk
Click to expand...
Click to collapse
did you use a plastic tool or a small screwdriver to get the phone out of the case?
Sent from my HD2 using xda premium
mexicandroid said:
did you use a plastic tool or a small screwdriver to get the phone out of the case?
Sent from my HD2 using xda premium
Click to expand...
Click to collapse
Small screwdriver, didn't want to but I was very careful and made sure I didn't hit anything
Sent from my GT-I9100 using Tapatalk
elesbb said:
Small screwdriver, didn't want to but I was very careful and made sure I didn't hit anything
Sent from my GT-I9100 using Tapatalk
Click to expand...
Click to collapse
After I take the cover of do I have to disconnect anything? I tried finding a video about it but no luck
Sent from my HD2 using xda premium
mexicandroid said:
After I take the cover of do I have to disconnect anything? I tried finding a video about it but no luck
Sent from my HD2 using xda premium
Click to expand...
Click to collapse
No luck??? lol look my friend i am your luck
elesbb said:
No luck??? lol look my friend i am your luck
Click to expand...
Click to collapse
Lol thanks I meant after I take the cover off, I was able to take the plastic buttons of but I didn't see much dust, I **** a little compressed air but that's all, how did you clean up the actual buttons?
Well I put it back together after blew the buttons but for a little while the touchscreen was not working at all, I rebooted a few times and it started working but same problem
Just wanted to know how you cleaned the buttons if I'm missing something. I really want to fix it because I don't to use my wife HD2, I'll never hear the end of it from her because I always tell her phone is better lol
Sent from my HD2 using xda premium
mexicandroid said:
Lol thanks I meant after I take the cover off, I was able to take the plastic buttons of but I didn't see much dust, I **** a little compressed air but that's all, how did you clean up the actual buttons?
Well I put it back together after blew the buttons but for a little while the touchscreen was not working at all, I rebooted a few times and it started working but same problem
Just wanted to know how you cleaned the buttons if I'm missing something. I really want to fix it because I don't to use my wife HD2, I'll never hear the end of it from her because I always tell her phone is better lol
Sent from my HD2 using xda premium
Click to expand...
Click to collapse
Lol. what cover are you talking about? i just followed the one video and blew compressed air through ever little nook and crany. It didnt fix it completely as im not too worried about it since my digitizer is shattered. So i'll be more worried about it once i get a new digitizer. But just follow one of the videos on youtube, they take the thing apart all the way down to individual parts.
Hey use attached apk, and remap one of your other buttons to function as the power button. I have mine set to the green button since i dont use it anyhow. That way the endkey doesnt get used so much. It works perfectly. once i get a new display im gonna rig a way to keep this from happening again.
elesbb said:
Hey use attached apk, and remap one of your other buttons to function as the power button. I have mine set to the green button since i dont use it anyhow. That way the endkey doesnt get used so much. It works perfectly. once i get a new display im gonna rig a way to keep this from happening again.
Click to expand...
Click to collapse
thanks but now my touchscreen does not work at all now. Maybe it was just the digitizer going bad in my phone. I'm using a Samsung Vibrant which in my opinion sucks, I just got it rooted, now I need install CM7, I miss my HD2 so much. I think I'm just going to order a digitizer from Ebay and try to install myself
damn the HD2 phone owners have so many rom choices compared to this vibrant
Sent from my SGH-T959 using XDA
mexicandroid said:
thanks but now my touchscreen does not work at all now. Maybe it was just the digitizer going bad in my phone. I'm using a Samsung Vibrant which in my opinion sucks, I just got it rooted, now I need install CM7, I miss my HD2 so much. I think I'm just going to order a digitizer from Ebay and try to install myself
damn the HD2 phone owners have so many rom choices compared to this vibrant
Sent from my SGH-T959 using XDA
Click to expand...
Click to collapse
Ha, have you tried rebooting the HD2? If i hit the end key, it stops working completely, but after a reboot it works again. So far it hasnt stopped working since i remapped the green key to be power key. And yeah i had to use my Touch Pro 2 until i finally got an HD2. I cant wait to get a job and get an SGS2 though. Thats an amazing phone.
elesbb said:
Ha, have you tried rebooting the HD2? If i hit the end key, it stops working completely, but after a reboot it works again. So far it hasnt stopped working since i remapped the green key to be power key. And yeah i had to use my Touch Pro 2 until i finally got an HD2. I cant wait to get a job and get an SGS2 though. Thats an amazing phone.
Click to expand...
Click to collapse
My wife has the sg2 but won't let me touch it. There nice but I want a phone with a quad core processor like the HTC one, that's what I'm waiting for
Sent from my SGH-T959 using XDA

[Q] Touchscreen Issues Presses keys by itself etc...

Hi guys...Just bought a N7 for my GF as a X-Mas gift and while it's great when working, there is a major touchscreen issue going on.
Let me first say I have searched and searched and came up with a lot, unfortunately it seems the problem was "fixed" by google with official updates. Well not in this case. I am on latest 4.2.1.
The issue is, the touchscreen will completely rearrange itself somehow. Example- if you click on something in the upper end it will click something randomly at the bottom of the screen. Another issue it, if you click on search/browser address bar and start typing, there is a ton of lag , and any number of things happen like, again, something else will get pressed at the bottom, or it will do nothing, and then suddenly start hitting a key (again, with the keyboard popped up at the bottom) like x over and over again, filling the page with 10-20 X's...
As soon as I put it to sleep and wake it up/unlock...it immediately goes away, just to come right back in a few minutes.
She does have a case on it with a magnet to auto wake, so I told her to take it off and see if it keeps doing it. It does...so no go there...
I want to call google for support, but am scared of getting a dumb rep that will tell me to power off the device etc...you know the drill...by the book pre-written crap they tell you to do, that solves nothing.
Any help would be much appreciated...and again sorry if this is something well known and simple to fix, but again, all my research dates back to june posts about issues already fixed via updates.
Thanks in advance!
Have you already tried a factory reset as after most recent update? You will lose all data but worth a shot. May need to RMA.
Sent from my Nexus 7 using xda premium
Ill try it
Sent from my SGH-T999 using xda app-developers app
Factory reset...ok for a while..then it started again...
Got it all figured out tho....if you ever so slightly twist the body to the left the screen will not respond at the bottom and will start pressing itself randomly....sometimes even touching the bezel will do something. ..then twist it a bit to the right and all is well...
Sh*t built product obviously. Had it in a case before even turning it on.
Going back...hopefully replacement will be better.
Sent from my SGH-T999 using xda app-developers app
accordex said:
Factory reset...ok for a while..then it started again...
Got it all figured out tho....if you ever so slightly twist the body to the left the screen will not respond at the bottom and will start pressing itself randomly....sometimes even touching the bezel will do something. ..then twist it a bit to the right and all is well...
Sh*t built product obviously. Had it in a case before even turning it on.
Going back...hopefully replacement will be better.
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
Ahh. You got the floating screen issue. Asus knows of it and will fix it.
Sent from my Inspire 4G using xda premium

Categories

Resources