Database Users

Dopod 818 Pro - need a complete rom dump or Shipping WWE rom

When changing from CHT to English I made a mistake and dumped the Charmer Rom Update... (by mistake.. wrong identification...)as a result the Extended rom stays the Chrmer and I can't get rid of it. I could not find a way to modify the extended rom can only "see" , can't modify it.
Could one of the 818pro wwe owners dump his complete rom (sd version) and upload it to the site?, Is there already a "shipped rom" version?

There is a copy in xda-dev ftp site at
/Uploads/818Pro_WWEOS/
Is your unit a Dopod? Anyway, I've tried to FLASH my MDA Compact 2 with a Dopod ROM and my camera stops working. Just take note of that.
There seems to a way to unlock (replace/modify) the Ext Rom.
Read here
http://forum.xda-developers.com/viewtopic.php?t=37386&postdays=0&postorder=asc&start=75

Dopod 818 pro and MDA compact II
Thanks hanmin for your prompt reply...
1. The MDA compact II is not the same H/W as the 818 pro. Your camera did not work becase the 818 pro has a defrent Camera 2.0 MPixels while the Compact II is only 1.3MPixels.
2. I tried all methods mentioned here and NADA... I can unhide the Extended Rom but I can't modify/get rid of the exsiting content (which has been originated by mistake when I RRUed it with the Charmer (MDA Compact II) files.
3. The 818pro on the FTP is missing the Extended rom NK/NBA files.. and I can't over write the rom because it is locked for writing. A shipping rom could help, because probably I can use the rom editing tools to set it up.
I wish there is a way to write back the extended rom files into the machine with the awizard utility (it is great.. but this function is mssing for my case...).
Still looking for a flash rom to clean my "dirty" T-mobile charmer extended rom on my 818 Pro..
Right now I stop the Extended rom update and built an ExtRom on my SD card using the files that are in the FTP.. however for future sake and for the simplisity of Hard Reset in the future I would like to have a complete Image of the Extended Rom.

UnlockCID

Hello,
I've read some posts that explain how to make a software upgrade to my Qtek S200 to Jamin or Dopod rom. Before I make the update, I want to backup my existing S200 rom with aWizard.
Instead of the backup, I read about CID unlocking if you want to be able to downgrade again to an older rom version, so I would like to CID unlock my S200.
There are some links in the forum to UnlockCID application, that points to xda-developers ftp, but the archive was removed.
Please, anyone can upload again the file or send me by e-mail to dagasoft(at)gmail.com.
Thanks.

I've just discovered that aWizard gives the option of CID unlock device.
Do this work for a Qtek S200?

after reading more posts, I've found that CID unlock is not possible for my Qtek IPL/SPL 2.09.
Btw, is possible to upload a different firmware with the hacked Rom Update Utility, but I cant backup my existing rom before.
I see the only possible way to CID unlock my S200 nowadays is using jafwm, so I would be able to run r2sd all to backup my existing Qtek S200 ESP rom.
Thanks for the replies :roll:

You can upgrade with the existing in imate ftp...
And you can do it in that way http://forum.xda-developers.com/viewtopic.php?t=52244
This way can't be used if you have 2.15.001 IPL:SPL

newbie rom question

Hi,
I buy a tmobile mda (usa) last week and I´m very happy with the new toy!
rom 2.26 tmobile.
I replaced my ipax, and my mpx 220 wit it.
I want to know, from the experts, what is the best rom to upgrade it??
Regards
Chris

anpther question
I have a question under the same catagory.
If I use spb backup and then upgrade my rom, can I restore my programs using the backup or is the backup rom specific?

hi
i have a new T-Mobile MDA Vario & the same question which ROM should i go for ?
Upgrade Rom Link
http://www.tm-phonedownloads.com/download_manager_mda_vario.html
Make Your MDA Vario Wizard Work Better - tips and tweaks
Forum Link
http://forum.xda-developers.com/viewtopic.php?t=53784&start=0&postdays=0&postorder=asc&highlight=
but still not sure what to do ....

backup my original rom !?

hi all,
I have read carrefully and used the search button but no one is talking about making a backup rom of its original one.
before to install a new one I prefere to have the possiblity to roll back.
if you know how to do it ...
thanx a lot
a new newbee user
V1605 vodafone sfr (qtek 9600)
ROM 1.23.163.3
date de ROM 06/18/06
version de radio 1.06.00.00
version de proto 32.27.7010.01w

Use SPB Backup!

SPB Backup will NOT back up the ROM.
I also want to back up my original ROM so that I can roll back. This is necessary if you ever have to send you PocketPC back to the manufacturer any kind of reasons.

There is a way to dump ROM (see WiKi), but no a way to flash the dump back. So, the only "backup" currently is an official ROM update. There are a few in the WiKi as well.

Thanks for your input Lurker0.
What can you do with a dump ROM ? I mean can I do something with it ?
I have the WM5 emulator on my PC, can I dump my TyTN ROM and put it on my PC so that the PocketPC emulator behaves exactly like my HTC TyTN ?

restoring backup same rom ?

Hi you all!
I have a t-mobile MDA Vario (Qtek 9100) with a big screen problem.
My idea:
Buy the same model on ebay and restore a backup onto
that new device.
Now:
Does this "new device" need to have the same ROM installed as the
device where the backup comes from?
Where do I get the ROM - how do I install it?
As far as I remember the latest ROM I installed was
the AKU2 from german t-mobile.
I have it on my desktop right now.
The device says:
ROM-Version: 2.21.2.8 GER
ROM-Datum: 3/9/06
Are there any tricks to get the backup working for a new ROM?
The backup was produced with Sprite Backup Version 5.1.0, Build 1417 .
I remember it has a "Device Upgrade mode" under Rostore Options.
What I don't remember is if this ever worked nicely
...gratefull for any hints