Increase RAM and Performance Tips - Touch Diamond2, Pure General

Ok so many people are ditching the topaz because they find it too slow, or its performance just doesnt cut it
But i will stay loyal!
Im starting this thread to share tips and tweaks I'm using to increase RAM/Performance on my topaz and hope other contribute too
1. Use rom build 21680 if possible (It is the fastest build for Winmo currently)
- Energy rom and Enterprise rom use this build at the moment
2. Im a huge flash-a-holic and flash roms on every update (tip dont use XDA-UC...i find that it slows down sense performance by just a little bit imo)
3. This is my NUMBER 1 recommendation for all topaz users! Netrippers 'MSM7kCpuSpeed' it's an overclocker which improves performance by HEAPS
-http://forum.xda-developers.com/showthread.php?t=725290
-http://forum.xda-developers.com/showthread.php?p=7419034#post7419034
(the second one is an app that automatically underclocks when screen is off to prevent SOD's and help save battery)
4. Energy rom and Enterprise are by far the best rom for speed and Ram so i recommend either one of those
Energy - http://208.100.42.21/showthread.php?t=562942
Enterprise - http://forum.xda-developers.com/showthread.php?t=742356
(for better Ram in Energy enable compact start menu saves around 30-40mb of ram)
5. MMAppLauncher to override the start menu to save ram
-http://forum.xda-developers.com/showthread.php?t=795393
(you can map it to the "windows" button using Topaz Key mapper -http://forum.xda-developers.com/showthread.php?t=555821)
Very fast and ram efficient
6. Set pagepool to '0' before flashing a rom for better performance...though it slightly uses more ram (works perfectly if you use a different start menu or energy rom)
-http://forum.xda-developers.com/showthread.php?t=323269
7. Using advanced config tool change all the cache sizes in the "performance" section to max (smooths out sense)
http://forum.xda-developers.com/showthread.php?t=418151
8. Try keep the rom as close as you can to when you flashed it and dont overload it with junk you don't use
9. clean up the start menu which is in the windows folder, this will allow the start menu to be more responsive
10. I personally use Cookie Home tab and design/create it so it looks as close to Standard sense 2.5 (minimal quick links and pages and turned off weather animation and clock flips)
I find it's very quick (faster then standard sense 2.5)
-http://forum.xda-developers.com/showthread.php?t=792303
11. if you don't care about all that fancy eye-candy and stuff, flash a basic titanium rom or sense 2.1 rom which are good on battery/ram/performance
(energy has all these variations ^^link above)
12. Remove all the sense tabs you don't use to increase sense performance
13. Keep in mind skinning uses ram and slows down performance by a little bit
14. disable the dialer skin if you don't care about it (can be done using advanced config tool)
15. Arto's start menu remover and replacement
Remover -http://ip208-100-42-21.static.xda-developers.com/showthread.php?t=642654&page=14
Replacement - http://forum.xda-developers.com/showthread.php?t=711914
well thats all i have for the time being...if people want i can keep updating this thread when i find something new?
(Also keep in mind that im not taking into account battery life)
but my battery goes for about 1-2 days on casual use and thats fine for me (as long as it's quick)
and please share your tips

Gtj94 said:
1. Use rom build 21680 if possible (It is the fastest build for Winmo currently)
- Energy rom and Enterprise rom use this build at the moment
####I think perhaps there are a lot of other roms out there which are all quite fast.
3. This is my NUMBER 1 recommendation for all topaz users! Netrippers 'MSM7kCpuSpeed' it's an overclocker which improves performance by HEAPS
-http://forum.xda-developers.com/showthread.php?t=725290
-http://forum.xda-developers.com/showthread.php?p=7419034#post7419034
(the second one is an app that automatically underclocks when screen is off to prevent SOD's and help save battery)
####Although there are some bugs in this, I agree. I am on 710MHz with a poling interval of 150ms.
4. Energy rom and Enterprise are by far the best rom for speed and Ram so i recommend either one of those
Energy - http://208.100.42.21/showthread.php?t=562942
Enterprise - http://forum.xda-developers.com/showthread.php?t=742356
(for better Ram in Energy enable compact start menu saves around 30-40mb of ram)
####I think WM6.1 is much quicker than WM6.5.
5. MMAppLauncher to override the start menu to save ram
-http://forum.xda-developers.com/showthread.php?t=795393
(you can map it to the "windows" button using Topaz Key mapper -http://forum.xda-developers.com/showthread.php?t=555821)
Very fast and ram efficient
####OCMan Start Menu is my preference. It only saves ram in WM6.5.
6. Set pagepool to '0' before flashing a rom for better performance...though it slightly uses more ram (works perfectly if you use a different start menu or energy rom)
-http://forum.xda-developers.com/showthread.php?t=323269
####I don't agree. I have set mine at 24Mb. Although this costs ram before my TD2 has done anything, it stablises at a lower ram rate after a period of use.
7. Using advanced config tool change all the cache sizes in the "performance" section to max (smooths out sense)
http://forum.xda-developers.com/showthread.php?t=418151
####Good for speed!
8. Try keep the rom as close as you can to when you flashed it and dont overload it with junk you don't use
####Agreed. If you want applications, then add them to your rom.
9. clean up the start menu which is in the windows folder, this will allow the start menu to be more responsive
####Does not apply if you remove the start menu in the first place.
13. Keep in mind skinning uses ram and slows down performance by a little bit
####If you are going to skin, then add the replaced files to the rom instead of duplicating them.
14. disable the dialer skin if you don't care about it (can be done using advanced config tool)
####I use Phonex and remove the WM dialer too. This saves 2Mb of ram.
15. Arto's start menu remover and replacement
Remover -http://ip208-100-42-21.static.xda-developers.com/showthread.php?t=642654&page=14
Replacement - http://forum.xda-developers.com/showthread.php?t=711914
####Good idea, but only for WM6.5/6.5.x
Click to expand...
Click to collapse
Thanks for your ideas Gtj! Whilst a lot of people have read them, not many have commented or given any extra ideas.
I would also add the following:
1. Remove as much stuff as possible from the rom that you don't use.
PS, how does this multi-quote mallarky work??

mitsi said:
PS, how does this multi-quote mallarky work??
Click to expand...
Click to collapse
Multi quote is used when responding to more than one post, so you click multi quote except for the last thread you are quoting.
Also it is not a good idea to quote the first post or a longer post as it just takes up space.

I think you've read my mind. thanks for the tips! been waiting for someone to speed up my td2

For overclocking I recommend the excellent OverClockTool by iwfratz.
My Topaz is running at 691 Mhz, 0 interval without any kind of problems, and it really is faster!
http://forum.xda-developers.com/showpost.php?p=7463284&postcount=162

Many thanks for these tips. Will definitely try them out.

Related

9 mnths on what is the definitive best ROM out there guys?!

I'd love to know what is the best of the best . . .
have use the O2, Qtek and Dopod but not on the same versions but I would say that Dopod's latest version works really well for me.
could you te me why?
I switched from T Mob Bloat Rom to the Qtek one.
I'd be interested to hear why you think it is so good.
Anyone else got a fave??
lr
I have been using an O2 Rom from the beginning of the year, and it is so very slow.
So I am rather keen to know what would be the best upgrade too.. Cheers!
looking in the other forum it looks like the dopod is quite good - again no friggin idea why!!!!
well for starters, they do not install a lot of aditional items. The only item installed is Voice Commander and that also is removable. In fact, when you do a hard reset and let the configuration run, you get almost 39mb of ROM space which is a lot in my opinion. Uninstall the Voice Commander and you get some more if you want to. There aren't even any additional themes like those installed on the iMate.
pretty kool - isn't voice commander any good then?
well its not too bad. supposed it can read your unread sms but i have yet to test it out.
though some like microsoft voice command as it announces who is calling.
i guess at the end of the day, it depends on what you need.
From my point of view, Qtek-9000 rom (whitout ext rom loaded) is the best one. It's light-weight, compact and fast enough than others. With some registry/memory tweaks, this is the fastest rom i ever used.
ranju said:
From my point of view, Qtek-9000 rom (whitout ext rom loaded) is the best one. It's light-weight, compact and fast enough than others. With some registry/memory tweaks, this is the fastest rom i ever used.
Click to expand...
Click to collapse
could you share with us what are the tweaks that you used?
Find the CAB attached. A restart is required after the installation.
The tweaks included in the CAB is mostly collected from the internet. But carefully tuned to get the best performance from Qtek-9000 (ROM). Universal has only 64mb RAM so that I tuned the registry to balance max free memory and best performance.
You will have an option (Settings>System>Power) in the processor tab to set the speed either Standard or Turbooooooooooooooo!
Turbo provides more processing speed but drains your battery toooooooooo!
Enjoy! :lol:
what does turbo mode do ??? it does not change cpu speed, so , what does it do '???
thanks
And please do post a list of the tweaks you have in the cab. I thought I could choose which ones to run but I guess not.
If I uninstall your cab with it revert to the previous registry entries?
adolfotregosa said:
what does turbo mode do ??? it does not change cpu speed, so , what does it do '???
thanks
Click to expand...
Click to collapse
The Standard behavior of the XScale processor is to run in dynamic mode, which means CPU usually tooks less power and switched in hi power mode only when an application asked it. But in Turbo mode, it runs in hi-power mode always and as a result you are getting better performance.
Ranju: is it for T-mobile only? I tried to install it (Qtek 9000) but it was neglected. (can't install it). Can the tweaks be manually done? If so: what are they?
ok but that implies changing the cpu speed and that isn't happening
Had to restore my backup... I removed the cab, which didn't unistall it completely. Tried to run it again and it wouldn't install (because it never removed the files it put in during the 1st install).
I like what you did, and I would kill to have a UI to pick and choose the changes I want applied. Right now there's not even a list of what's in there, which is why I tried to remove it in the first place.
It's a nice enough idea though.
ok ,it does not change the speed but picodrive runs MUCH smother !! i'll try to do this "feature" with XCPUScalar2006_v2.98 so i can use "speedstep" to save battery

Making the Best out of ULTIMATE 8150

for a few days on searching for rom updates for ULTImate 8150 and found nothing, i had installed and tweaked the registry settings of my device and made some adjustments to improve its overall performance... here are some of what i did:
1. installed qmenu for the pupose of enabling the ok as close button so as to always close opened applications- this will enable the device to use more memory for applications that need more memory allocation. Dont forget to check the "enable at startup" setting.
2. installed advance configuration v.3 to tweak registry keys to maximize performance and battery saving of the device. in this version, you will find other options that also be useful such as softkey (left and right) launcher editing.
3. installed CF Version 3.5 to also increase slight speed with opening and processing handling of the device. i have not uninstalled the CF version 2 since you cant literally remove it from the ROM. then, changed a key in the registry from v.2 to v.3.5(search for "askd" post in how to speed up OEM roms). I also noted some good effects in doing this--- applications which requires CF v.2 or V3.5 can be used with my device, since i only tweaked the registry and not physically removed the version 2, applications which need either v.2 or v.3.5 can be used.
4. tweaked some display setting keys to ddi.dll to nvdddi.dll (im not really sure if this changed graphics performance) but i used TCPMP player and just did a few settings changes and videos played really smooth, dvd quality plays really good--i used converter to compress videos(avi-divx format). i am still testing few graphics driver i found including samsung's intel based driver and other graphics driver(ati and nvidia), i just post my feedback soon about this issue.
5. tweak the contrast key in the registry and unlocked a menu in the system settings with regards to contrast.
6. adjusted backlight settings to third bar from the left and set backlight to shut in 10 sec, 1 min respectively.
7. deleted some start-up applications which consumes additional running memory of the device.
8. installed other apps n tweaks but i cant remember all coz i think ive done almost a hundred softresets and hard resets for testing drivers and apps so ill just update this post. maybe you guys could add to this...
for now, im looking for apps for the camera, arcsoft or other, for better and additional options for camera.
also found a useful driver for enabling miniUSB to be a comm port. you can connect other devices to this port. still testing...
--hope this could help in a way for ULtImate 8150 users... im still testing some apps and tweaks with my device. ill just update this post if i find other good stuffs to post.
dhoosh
by the way, thanks to the authors of the softwares/apps/tweaks if mentioned... and to all contributor of this site...
i m new to ultimate 8150.....cud u plz plz plz give details how u did all da stuff (tweaking stuff)
thnx
aztigen22 said:
for a few days on searching for rom updates for ULTImate 8150 and found nothing, i had installed and tweaked the registry settings of my device and made some adjustments to improve its overall performance... here are some of what i did:
1. installed qmenu for the pupose of enabling the ok as close button so as to always close opened applications- this will enable the device to use more memory for applications that need more memory allocation. Dont forget to check the "enable at startup" setting.
2. installed advance configuration v.3 to tweak registry keys to maximize performance and battery saving of the device. in this version, you will find other options that also be useful such as softkey (left and right) launcher editing.
3. installed CF Version 3.5 to also increase slight speed with opening and processing handling of the device. i have not uninstalled the CF version 2 since you cant literally remove it from the ROM. then, changed a key in the registry from v.2 to v.3.5(search for "askd" post in how to speed up OEM roms). I also noted some good effects in doing this--- applications which requires CF v.2 or V3.5 can be used with my device, since i only tweaked the registry and not physically removed the version 2, applications which need either v.2 or v.3.5 can be used.
4. tweaked some display setting keys to ddi.dll to nvdddi.dll (im not really sure if this changed graphics performance) but i used TCPMP player and just did a few settings changes and videos played really smooth, dvd quality plays really good--i used converter to compress videos(avi-divx format). i am still testing few graphics driver i found including samsung's intel based driver and other graphics driver(ati and nvidia), i just post my feedback soon about this issue.
5. tweak the contrast key in the registry and unlocked a menu in the system settings with regards to contrast.
6. adjusted backlight settings to third bar from the left and set backlight to shut in 10 sec, 1 min respectively.
7. deleted some start-up applications which consumes additional running memory of the device.
8. installed other apps n tweaks but i cant remember all coz i think ive done almost a hundred softresets and hard resets for testing drivers and apps so ill just update this post. maybe you guys could add to this...
for now, im looking for apps for the camera, arcsoft or other, for better and additional options for camera.
also found a useful driver for enabling miniUSB to be a comm port. you can connect other devices to this port. still testing...
--hope this could help in a way for ULtImate 8150 users... im still testing some apps and tweaks with my device. ill just update this post if i find other good stuffs to post.
dhoosh
Click to expand...
Click to collapse
i m new to ultimate 8150.....cud u plz plz plz give details how u did all da stuff (tweaking stuff)
thnx

First steps with a Touch Diamond 2

Hi people,
I have just got my new Touch Diamond 2 and it's beautiful. I have spent several days googling looking for the best place of expertese for tweaking and customising, and it seems this is the place. I have never owned a Windows Mobile device or a HTC before, but I'm PC savvy and I want to tweak my new phone.
Among other things, I want to:
Be sure my phone uses Wifi when available instead of contract internet
Tweak the TouchFLO home screen (including analogue clock and RSS)
Find a list of the best and/or most popular mods/software
Where do I start and what do I need!
Congratz
As I've heard and noticed from my own TD2 is that it always uses wifi over data. But if you really want to be sure you can disable Data Connection in the Communication tab whenever you want to surf.
You can also in All Settings => Personal => Buttons configure that long hold button disables Data Connection.
As for tweaking I would download Diamond Tweak and Advanced Config
http://www.touchxperience.com/en/advanced-configuration-tool/downloads.html
http://montecristoff.webs.com/diamondtweak.htm
First law of windows mobile: keep the internal disk clean!
Install every new piece of software on the memory card.
For my TD2 I got a 16Gb microSD card and started with Advanced Configuration Tool v3.3 to tweak all storage-related paths to folders I created on the memory card.
A good place to start looking for tools is freewarepocketpc.net. A lot of more than decent free applications. The ones you don't like can always be removed in settings/system/remove programs, and replaced by commercial tools.
I disagree.. I used to install everything on the external card; and found two major disadvantages:
- some app will run a lot slower!
- if you use your sd card to store music video and other stuff
you better not have to change it...
I m more inclined to install less apps that filling the memory card with it.
The main use I have for the memory card is to store backups, documents, music, and install cab files.
robinVerdegaal said:
First law of windows mobile: keep the internal disk clean!
Install every new piece of software on the memory card.
For my TD2 I got a 16Gb microSD card and started with Advanced Configuration Tool v3.3 to tweak all storage-related paths to folders I created on the memory card.
A good place to start looking for tools is freewarepocketpc.net. A lot of more than decent free applications. The ones you don't like can always be removed in settings/system/remove programs, and replaced by commercial tools.
Click to expand...
Click to collapse
How did you get the tools to install?? I get an unsigned error for everything..
elmalote said:
As for tweaking I would download Diamond Tweak and Advanced Config
Click to expand...
Click to collapse
Why Diamond Tweak?
Better use HD Tweak:
http://www.montecristoff.com/hdtweak.htm
iluszn said:
How did you get the tools to install?? I get an unsigned error for everything..
Click to expand...
Click to collapse
Didn't have any problems. I got a warning, but no error after continuing.
elmalote said:
You can also in All Settings => Personal => Buttons configure that long hold button disables Data Connection.
Click to expand...
Click to collapse
Yeah I saw those button settings but couldn't work out what they meant. What is this long hold button? Is it the dial button that if you hold puts it on speaker phone? And how would you configure it for disabling a data connection, I don't see and option that would allow this?
I have seen that freewarepocketpc website, and had a snoop around. I have an 8Gb card coming today (hopefully!) and I was waiting to get that to install software on it. I read that might slow down some apps, now I'm not so sure what to do. However I want to avoid installing a load of software to try it out, then uninstalling it. It is windows after all. That's why I wanted some recommended software from people on here.
Question: Will that configuration tool allow tweaking of the TouchFLO stuff? Has anyone changed the clock on the TouchFLO Home page thingy?
Thanks all for your help
You have to chose the tab "End Key" under the Button setting menu and then chose the "terminate data connection" option
Ahh I get it now, had a look at those keys thanks. Going to use Advanced Configuration Tool when I get my memory card (still not here yet!)
The best single piece of advice I can give any TD2 owner is to ditch TF3D and at least try living without it. Your rewards will be more available memory, faster operation, increased functionality, full use of applications' today screen plugins, less (or no) bugs, and the cost is it doesn't look as nice.
In a couple of months' time, WM6.5 will be out and then even the looks will be there.
After much research I have ditched TouchFLO and got SPB Mobile Shell 3. I keep hearing about bugs but I am yet to encounter one. I have to say that SPB Mobile Shell 3 is what I would have expected to have on a phone like this. TouchFLO looks good, and I have a friend that loves it, but you can't customise it very easily. Simply having the widgets in SPB Mobile SHell 3 makes it a better, mnore customisable and quicker interface.
I currently have Total Commander as an explorer replacement. I'm not sure if this is the best, but I have yet had time to do proper research. It's supposed to have a registry editor in there, but for the life of me I can't find it :/
Had some serious fun with video playback. I wanted to play full quality (not HD) dix files, DVD rips and the like. After much fun with different software I found that Coreplayer blows everything out of the water. My expectations had dropped about what I might be able to watch on my phone after having problems with other media players, but Coreplayer can play full movie DVD rips with no stuttering and it looks awesome.
Still some fun to be had tweaking, for example finding out if/how java stuff will work, trying to find something for email/sms, and some "cool" apps to impress my gran.
I'm no expert but purely from personal experience the first steps are:
1) Install Resco Explorer
http://www.resco.net/pocketpc/explorer/default.asp
2) Install HTC hotfix for Diamond 2
(http://www.htc.com/uk/SupportDownload.aspx?p_id=249&cat=0&dl_id=563)
3) Install .NET Framework 3.5 (requirement for a bunch of 3rd party software)
http://www.microsoft.com/downloads/...FD-AE52-4E35-B531-508D977D32A6&displaylang=en
4) Install SKTools (needed for many things but especially for next step)
http://www.s-k-tools.com/index.html?m_products.html#tools
5) Use SKTools to disable ActiveSync (results in huge improvement of battery duration)
5a) Disable the repllog.exe (which is the application behind ActiveSync) associated with ""AppRunAfterTimeChange"" in Notifications Queue
Alternative way is to install Dotfred's Task manager and kill repllog.exe: http://forum.xda-developers.com/showpost.php?p=3175757&postcount=50
5b) Follow the steps 1-7 in the thread: http://forum.xda-developers.com/showthread.php?t=288352
5c) Install eLiAs_ASyncKiller.cab
http://forum.xda-developers.com/showpost.php?p=3048077&postcount=40
6) Install HDTweak for various tweaks (eg for improvement of TouchFlo response)
(http://forum.xda-developers.com/showthread.php?t=452505)
7) Install sdkcerts (needed for "cosmetic" interventions eg Hall Feica fonts in TouchFlo, slpashscreens, topbar etc)
http://forum.xda-developers.com/showthread.php?t=471604
http://forum.xda-developers.com/showpost.php?p=3661976&postcount=80
http://forum.xda-developers.com/showpost.php?p=3861405&postcount=2
8) Install Diamond D3D Video drivers using the first attachment from:
http://forum.xda-developers.com/showthread.php?t=475493&highlight=ATI+3d+driver
Before installation download and run the fourth attachment (Lights.exe)
Install the drivers and then run Lights.exe again to see the huge improvement
9) Install G-Config (for forcing applications to go into landscape mode)
http://forum.xda-developers.com/showpost.php?p=3848546&postcount=3
10) Enjoy your Topaz
P.S.: Backup your Contacts, Calendar etc frequently
harisg said:
I'm no expert but purely from personal experience the first steps are:
Click to expand...
Click to collapse
You may think you are not an expert but your post is very useful (and very well formatted).
Thanks
The hotfix is only required if you run TF3D right?
nice guidelines dude.. thanks
chch said:
You may think you are not an expert but your post is very useful (and very well formatted).
Thanks
The hotfix is only required if you run TF3D right?
Click to expand...
Click to collapse
According to htc europe:
If you move to the Settings tab in TouchFLO, the top part of the item descriptions under Communications (WiFi, Bluetooth, phone, data) are slightly cut off. If this happens, please download this hotfix to solve the problem.
So I think the answer is yes
Oops I forgot the very useful CleanRAM from htcaddicts:
http://forum.xda-developers.com/showthread.php?t=514333
I use its embedded scheduler so it runs automatically every 3 hours claiming back megabytes of RAM
Mark it as step 11
I currently have Total Commander as an explorer replacement. I'm not sure if this is the best, but I have yet had time to do proper research. It's supposed to have a registry editor in there, but for the life of me I can't find it :/
Click to expand...
Click to collapse
Double click on "\\Plugins" and you'll reach the hidden options including the registry editor. I've been using Total Commander for years on various ppcs, it's all you need for registry work.
harisg said:
6) Install HDTweak for various tweaks (eg for improvement of TouchFlo response)
Click to expand...
Click to collapse
Hiya, great post~!
I have the Diamond2 as well... wouldn't I want to install 'Diamond Tweak' instead of 'HD Tweak'? Are they essentially the same thing, or does HD Tweak offer more functionality for the Diamond2?
Cheers,
Diamond Tweak is for the older version of TouchFlo, use HD Tweak.

Custom ROM Feature requests

A bit of 'customer feedback' etc:
I was going to ask a question, because I have a specific request, but then thought rather than limit the thread why not make it a general feature request for custom ROMs, for people to come up with new ideas etc for our esteemed cooks to implement.
Anyway, this is my request:
Can we have a 'delete' icon on the SMS and Email tabs in Sense, so we can delete junk emails as they arrive without having to open them first?
Thanks
Paul.
some requests from the Chefs
1 - transparency all over, everywhere.
2 - no curtains anywhere
3 - small sized colour icon pack for taskbar, notifications, startbutton
4 - built in Slide-2-Unlock (ask the devs)
5 - all stock photo's , stock stocks, stock footprints delete
6 - clock packs in cabs with installation. Clock with seconds
7 - actionscreen on endcall button and left softkey
8 - preinstall my own application Reperion (find your phone back after theft)
9 - Organized startmenu !!!! All these freaking icons need to much scrolling!
10- built in ACR HD2 (automatic call recording)
11 built in musicID latest version
etc etc.. let the cooking begin
stable, stable , very stable ~
Hope this gonna be true
Sense 2.1!
I wish I could have the folowing.
- Without Copilot8 trial
- WM messaging (not HTC messaging) by default
Well. that's all..
Something that I'd definitely want is a simple and useful task manager that would make switching between say the music player and browser much less of a chore(I have the taskmanager on my startscreen as a quick launch icon). Just mapping the current task manager to one of the hard buttons would suffice.
* Super-fast.
* Loads of free ROM space - dump all unneeded crap like wallpapers and ringtones as separate cabs
* WM 6.5.x (a must!)
* Stock Manila with options to customise
* Dump Jblend for Jbed. Jbed is sooo much faster
* Microsoft Bluetooth Stack... if possible (probably not).
1- delete button on the email tab
2- graphical task switcher (similar to Windows 7) with touch scrolling through tasks
3- larger buttons (see NRJ Blackstone ROMs)
4- enable windows Mobile contacts in HTC "People" so you don't have to use the Windows Contacts application to create Windows Live contacts.
5- Ported Google Maps Navigation application from Android
6- enable importing of facebook phone numbers when linking contact to facebook, currently only birthday and picture are being imported.
Don't know if this is possible but
1. Option to save all e-mail (not just attachments) from all accounts to microSD
2. Import facebook birthday from contacts to calendar
3. Eliminate bugs with alarm app, sometimes I have to press 2-3 times to get into app
- Without Copilot8 trial
- WM messaging (not HTC messaging) by default
The Main to reqeusts, get rid of the buggy HTC messaging and CoPilot trial to save space!
- as close to stock as possible.
- option to have chinese traditional support (dislay/keyboard)
Dont take this the wrong way but..
Many chefs here choose to make their ROMs to fit the "market", to please as many as possible. So changes as, transparency there, transparency here, app this, app that. Its just to specific to each induvidual that want a cooked ROM.
Dont get me wrong, its good that you guys tell the/us chefs what you want. But this could just be done in the chefs ROM threads instead.
Just read the posts. Many of you takes up the same things. If you want a ROM that fist all youre needs, cook it youre self (Or talk to a nice chef to do if for you?).
Just my 2 cents..
barbapappa_86 said:
Dont take this the wrong way but..
Many chefs here choose to make their ROMs to fit the "market", to please as many as possible. So changes as, transparency there, transparency here, app this, app that. Its just to specific to each induvidual that want a cooked ROM.
Click to expand...
Click to collapse
I couldn't agree more. I don't "cook" myself, but I'm an avid taster
I would personally LOVE to see a ROM with nothing but the basics on there, along with a list of CABs, in order to install anything not included. That way, we can have a real lite version of the OS & GUI, and customize the software ourselves. I'm just after more space, and less of what I don't actually want!
johncmolyneux said:
I couldn't agree more. I don't "cook" myself, but I'm an avid taster
I would personally LOVE to see a ROM with nothing but the basics on there, along with a list of CABs, in order to install anything not included. That way, we can have a real lite version of the OS & GUI, and customize the software ourselves. I'm just after more space, and less of what I don't actually want!
Click to expand...
Click to collapse
Excactly.. There are UC comp ROMs and SHASHIMI to tweak the phone after HR, so just cooking some stuff in it is worse imo. I just dont se the point.
barbapappa_86 said:
Excactly.. There are UC comp ROMs and SHASHIMI to tweak the phone after HR, so just cooking some stuff in it is worse imo. I just dont se the point.
Click to expand...
Click to collapse
The only advantage I see is fast setup after hard reset if all the settings and tweaks are included in a ROM.
But many requests we have here are things for which there are no cabs, so maybe it is interesting not only to the cooks but also to the app developers (BS Tweak, Max Manilla, Touch X Icons etc...).
johncmolyneux said:
I couldn't agree more. I don't "cook" myself, but I'm an avid taster
I would personally LOVE to see a ROM with nothing but the basics on there, along with a list of CABs, in order to install anything not included. That way, we can have a real lite version of the OS & GUI, and customize the software ourselves. I'm just after more space, and less of what I don't actually want!
Click to expand...
Click to collapse
Agreed.
Would love to see an Ultra Lite ROM with everything that can be removed gone. In addition to this... cab files to put the removed stuff back if you wanted to.
What really annoys me with ROMs is when apps like google maps and Opera are cooked in.... These apps are always being updated so removing them from ROMs just makes sense!
Request
- Better touch screen accuracy.
- Better touch keyboard accuracy (like in iPhone)
- Close/Minimize buttons like in Windows 95/98/NT/XP/Vista/7
- Some kind of Windows 7 pined buttons at the bottom of screen, so you can always Maximize soft.
without copilot trial
auto power on/off on base of proximity sensor (or combination)
auto in call speaker on/off on base of proximity sensor (or other)
a lot more storage space, unbelievable now... 512mb rom standard, after initial setup there is only 178.11MB free to use???? So so soooooo wrong.... lol
working taskmanager @ top right corner, one which doesn't slow the device down!!!! showcase is no option, unresponsive and too big. One tap should be enough to display the running tasks..... (with the option to close them or switch to them)
fix the htc weather graphics of frost/snow (see attached pic for clarification ) --> only noticeable when you use hdwall for full screen wallpapers.
find a way to limit the number of sms to display when using threaded sms. It takes ages for the damn program to load the conversation. If for example it only loads like 20-30 sms, then there will be no problem i think. May b a button to show history (all?) --> may b better a suggestion to HTC, apparently they haven't tested with a large number of text messages. If they did...... SHAME ON YOU!

Diamond 2 Performance: why so slow ?

Hello all TD2 users. After trying countless roms, cabs, settings, tweaks and all, reading information about the hardware in the phone i really don't understand:
Why is the phone so slow?
What i mean:
1. The stock rom is a nightmare to use, it lags, all the fancy animations are actualy made for the HD2: 2x faster phone than our. Custom roms are better optimised but even than it's a choppy feeling.
2. The qualcomm 528mhz processor is not the slowest one, BUT, it cannot keep up with the software. Even overclocked to 710mhz, stable, the phone is not fluent by a long run.
3. The Adreno 130 GPU ? What actually does it do ? Is the Sence UI using the GPU, only the GPU or it's mixed ? Overclocking the Processor don't speed up the animations and the transition between tabs. So i guess the GPU is the only power you need to run the UI ?
4. If the GPU is slow, why actualy do HTC put a 800x480 screen. The WildFire has a resolution 3x smaller and a 2x faster GPU (adreno 200) and a better CPU too.
I really don't get it. Is it all software related, or the Diamond 2 is a total hardware and software mess, just put what we have to date (year 2009) and go for it.
Can someone inform me about some of the points. I have real interest in knowing the phone.
Thanks.
I never had issues on this device.
I agree the stock ROM is disastrous, but I have ran some cooked ROMs that performed quite well and never over clocked.
Also over clocking beyond a certain point will cause lags, as I'm sure you are aware. I thought it was around 648 where it starts.
A task killer is essential so you do not have too many apps running simultaneously.
Too many apps installed can degrade the speed as well.
I do not think it is necessarily hardware limitations.
A couple of pointers would be to either flash back to stock or perform a MTTY Task 29 in between flashing ROMs, soft reset occasionally to keep cache clear and do not install crucial apps to the SD card.
I completely agree with Bruce.
I never seen any performance issue with the device even when I was using the Stock ROM or my OWN Cooked Rom, which I feel much more better for my device.
- You will need to make sure you are not overloading apps that are keep running in background.
- Do use any good task manager. I USE and suggest ArkSwitch.
- Avoid Manila Mods that kill performance. Alway try to stick to simple Manila (like the default that comes with device/rom) .
- Avoid big wallpapers.
etc are some of the basic tips that I can suggest .
Thanks.
Actually the latest Rom from Prabhat, Photon 1.4 is showing me that the device can actually be faster than i thought. I just have one concern. I have enabled location settings in the manila panel, so i received the Weather forecast with animation and icon on the Clock.
Now the animation kills the home screen, it's choppy and with it the whole home tab. Even after setting up a wallpaper with no animation / weather or any other, only the fact that i have the weather icon on my Clock slows down the Home Tab.
I don't think that it's only me, seeing bad performance with the weather thing.
I actually needed to hard reset the phone, to have that animation and weather icon off. It's good that this isn't working directly with first boot up and you need to set it up (at least with me) so i can enjoy a seamless Home Tab navigation. Where is the point of having something designed for other, faster platform, working rather bad on our older Diamond 2 ?
some tips to make your device faster:
disable that crapy htc sence. it will save more than 50MB or ram. use instead that titanium, iphonetoday or simple plain today screen.
use mmAppLauncher, it will save you ~20MB of ram.
In total, at cold start you will have ~120MB free, after one day usage - about 110.
ofcourse, battery last longer.
stock 2.53.479.3 wwe rom
I have the same problem with the phone and have downloaded no apps or anything in the 12 months I've had it. Goes really slow, freezes frequently. Working my way through all these threads to try and figure out how to make the thing just work. Will be trying some of the suggestions above.
One thing that I have seen slow these phones down is excessive amounts of saved texts. You may want to clear as many as you can out and see if that helps.
I have the same problem .I've try all ROM's ,official and cooked,but nothing.After 2-3 days ,topaz need to be hard reseted.I try to do not install any apps and nothing maybe i increase the days to a week.I try also android but it's slow too.The only ROM that i like how it's working it's from O2 XDA,but it's with the old one htc sence and it's German.actually the only problem is the sence.
I've try all king of setting,regs and everything else.PLS help need-fast,stable and clean rom-only with sence
Hi , i am using topaz and it works pretty good , reinstall windows after 1moth use, but if you compare it with android its very slow , so try android if you want more speed
The only time when i Hard-reset is when i flash the new Energy Rom's.
They are not sluggish en work very well.
As NRGZ28 says:
I build my ROMs with four main goals.
Eye candy ( I want my ROM to look great and for it to all flow together nicely)
Speed !!!
Smoothness, consistency and good aesthetics
Stability through private beta testing before public release
Click to expand...
Click to collapse
I have a new Diamond 2 and all good and fast response for me
Also I have also installed ArkSwitch as suggested above and this is a good task manager I think.
Using WM6.1 with a tweaked rom and no Manila its running fast enough for me.
I also installed Stop PushInternet for real to save another 9.5 MB of memory
Nice post. Thanks for the pointer.
I will check the registry of my ROM to see if I need that cab

Categories

Resources